Philips DVP3388K 5 User Manual
Register your product and get support at
www.philips.com/welcome
DVP3388K
EN User manual
Contents
1 Important 4
Safety and important notice 4
Trademark Notice 4
2 Your DVD player 5
Features highlight 5
Product overview 5
3 Connect 6
Connect video cables 7
Connect audio cables 8
Route audio to other devices 8
Connect USB device 9
Connect to power outlet 9
4 Get started 9
Prepare the remote control 9
Find the correct viewing channel 9
Select menu display language 10
Turn on Progressive Scan 10
Use Philips EasyLink 10
5 Play 11
Play from disc 11
Play video 11
Play music 14
Play photo 15
Play from USB device 15
8 Adjust settings 17
General setup 17
Audio setup 18
Video setup 20
Preferences 21
9 Additional information 22
Update software 22
Care 23
10 Specifi cation 23
11 Troubleshooting 24
12 Glossar y 25
English
6 Advanced features 16
Media copy 16
Create MP3 fi les 16
7 Adjust sound 17
Karaoke settings 17
Turn off vocal (cancel voice) 17
EN 3
1 Important
Safety and important notice
Warning
• R isk of overheating! Never ins tal l the DVD player i n a
confi ned space. A lways leave a space of at l eas t four
inches arou nd the DV D playe r for ven tilation . Ensure
the cur tains or oth er object s neve r cover the ventilat ion
slots on the DVD player.
Never p lace th e DVD player, remote cont rol or b att eri es
•
near na ked fl ames or oth er heat sour ces, i ncluding di rec t
sunlight.
Only use this DV D playe r indoors . Keep t his DVD player
•
away from water, moisture a nd liq uid- fi lled objects.
Never p lace th is DVD player on other electrical equipment.
•
Keep away from t his DVD player d uri ng ligh tning stor ms.•
Use of control s or adjustment s or per formance of •
proce dures othe r than h ere in may result in haz ard ous
radi ation exposure o r other unsafe oper ation.
Wher e the mains plug or an a pplia nce cou pler is used a s
•
the dis connect device , the di sconn ect d evice s hall r emai n
readily operable.
Visib le and i nvisible la ser r adia tion w hen open. Avoid
•
expos ure to b eam.
About Progressive Scan
Consumers should note that not all high defi nition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of 525 or 625 progressive scan picture
problems, it is recommended that the user switch the
connection to the ‘standard defi nition’ output. If there
are questions regarding our TV set compatibility with
this model 525p and 625p DVD player, please
contact our customer service center.
Recycle notice
This electronic equipment contains a large
number of materials that can be recycled or
reused if disassembled by a specialized
company. If you are disposing of an old
machine, please take it to a recycling center. Please
observe the local regulations regarding disposal of
packaging materials, exhausted batteries and old
equipment.
Copyright notice
This product
incorporates copyright
protection technology
that is protected by
method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be authorised
by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Trademark Notice
Manufactured under license
from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license
under U.S. Patent#’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and worldwide
patents issued & pending. DTS and DTS Digital
Surround are registered trademarks and the DTS
logos and Symbol are trademarks of DTS, Inc. @
1996-2008 DTS, Inc. All Rights Reserved.
Windows Media and the Windows
logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or
other countries.
DivX, DivX Ultra
Certifi ed, and associated logos are trademarks of
DivX, Inc. and are used under license.
Offi cial DivX® Ultra Certifi ed product.
Plays all versions of DivX ® video (including DivX ®
6) with enhanced playback of DivX® media fi les and
the DivX® Media Format.
Plays DivX® video with menus, subtitles and audio
tracks.
The USB-IF Logos are trademarks
of Universal Serial Bus Implementers Forum, Inc.
HDMI, and HDMI logo and
High-Defi nition Multimedia Interface are trademarks
or registered trademarks of HDMI licensing LLC.
4 EN
2 Your DVD player
ALL
ALL
Congratulations on your purchase, and welcome to
Philips! To fully benefi t from the support that Philips
offers, register your product at www.philips.com/
welcome.
This DVD player offers higher picture quality video
play for an amazing viewing experience.
Features highlight
Video upscaling to 1080p
You can now watch the DVDs in the highest picture
quality available for your HDTV. This DVD player
offers full high-defi nition video play up to 1080p
resolution for an amazing viewing experience. A
highly detailed picture and increased sharpness
delivers a more true-to-life picture.
EasyLink
EasyLink uses the HDMI CEC (Consumer Electronics
Control) industry standard protocol to share
functionality with all HDMI CEC compliant devices
over HDMI. It enables the connected devices to
control each other with a single remote control.
Note
Easy Link (HDMI CEC ) is onl y applicab le wit h cer tain •
crit eri a. Terms and con ditions may v ar y by product.
Consu lt your prod uct d eale r for info rma tion .
•
Phili ps does not gua rantee 10 0% intero per abil ity w ith all
HDMI CEC dev ices .
Screen fi t
View the movie in full screen on any TV with this
DVD player.
Hi speed USB 2.0 link
Simply plug your USB fl ash drive into the USB jack to
play your MP3/WMA/JPEG/DivX/WMV fi les to enjoy
the music play in superb sound quality.
Media copy
You can transfer data fi les such as MP3, WMA and
JPEG from disc to USB fl ash drive.
Create MP3 fi les
Convert your favourite audio tracks from an audio
CD into MP3 format. The created MP3 fi les are saved
in your USB fl ash drive.
Karaoke scoring function
Karaoke scoring gives a score for each performance.
Have your singing performance scored for even more
karaoke fun at home!
Region codes
Your DVD player plays discs with the following region
codes.
DVD region code Countries
Asia Pacifi c, Taiwan,
Korea
Australia, New Zealand
Product overview
Main unit
a 2 (Standby-on)
Turn on the DVD player or switch to •
standby mode.
b Disc compartment
c Display panel
d Z (Open/Close)
Open or close the disc compartment.•
e u (Play/Pause)
Start, pause or resume disc play.•
f
(USB) jack
Connect a USB fl ash drive.•
g
MIC
Audio input from a microphone.•
31 2
4
7
6
5
English
EN 5
Remote control
1
2
3
4
5
6
7
8
9
10
a 2 (Standby-On)
Turn on the DVD player or switch to •
standby mode.
Press and hold to turn off the DVD player •
and all HDMI CEC compliant devices.
b Z (Open/Close)
Open or close the disc compartment.•
c DISC MENU
Access or exit the disc menu.•
Switch to disc mode.•
For VCD/SVCD, turn PBC (Playback •
Control) on or off in PBC mode.
d v V b B (Navigation buttons)
Navigate through the menus.•
Search fast-forward (• B) or fast-backward (b).
Press repeatedly to change the search speed.
Search slow-forward (• v) or slow-backward
(V). Press repeatedly to change the search
speed.
e BACK
Return to the previous display menu.•
For DVD, navigate to the title menu.•
For VCD version 2.0 or SVCD with PBC •
turned on, return to the menu.
f í/ë (Previous/Next)
Skip to the previous or next title, chapter, or •
track.
6 EN
Press and hold for fast-backward or •
fast-forward search.
g
(USB)
Switch to USB mode and display the content.•
18
h Numeric buttons
Select an item to play.•
i SUBTITLE
Select DVD or DivX subtitle language.•
17
16
Access the menu to USB copy or USB •
delete.
j , ZOOM
Fit the picture format to the TV screen.•
15
14
Zoom in or out of the picture.•
k VOCAL
Change the audio channel of a karaoke disc.•
l KARAOKE
13
12
11
Access or exit the karaoke menu.•
m AUDIO/CREATE MP3
Select an audio language/channel.•
Access the menu to create MP3.•
n x (Stop)
Stop disc play.•
o u (Play/Pause)
Start, pause or resume disc play.•
p
INFO
For disc, display the current status or disc •
information.
For slideshows, display a thumbnail view of •
photo fi les.
q OK
Confi rm an entry or selection.•
r SETUP
Access or exit the setup menu.•
3 Connect
Make the following basic connections to use the DVD
player.
Basic connections:
Video cables•
Audio cables•
Optional connections:
Audio to other devices:•
Multi channel receiver•
Digital amplifi er/receiver•
Analogue stereo system•
Note
Refer to t he ty pe pla te at th e rear or bot tom of the •
product fo r iden tifi cation and supply rating s.
•
Befor e you make or cha nge any co nnec tio ns, en sure that
all the devices are d iscon nected fr om the power ou tlet.
Tip
Different types of con nec tors may be used to connect •
this pr oduct to your TV, de pend ing on av aila bili ty and
your needs. A compr ehensive inter act ive gu ide to
help you conne ct you r prod uct i s available a t ww w.
connectivityguide.philips .com.
Connect video cables
Connect this DVD player to the TV to view disc play.
Select the best video connection that the TV can
support.
Option 1:• Connect to HDMI jack (for a HDMI,
DVI or HDCP-compliant TV).
Option 2:• Connect to component video jacks
(for a standard TV or Progressive Scan TV).
Option 3:• Connect to video (CVBS) jack (for a
standard TV).
Note
You must con nec t this • DVD player directly to a TV.
Option 1: Connect to HDMI jack
Tip
This t ype of co nnec tio ns prov ide best pi cture qua lit y.•
Option 2: Connect to component video
jacks
Pb
Pr
Y
Pr
Y
COMPONENT VIDEO OUT
Pb
COMPONENT
VIDEO IN
1 Connect the component video cables (not
supplied) to the Y Pb Pr jacks on this DVD
player and the component video input jacks on
the TV.
If a progressive scan TV is used, you may •
turn on the progressive scan mode (see
chapter ‘Turn on Progressive Scan’ for
details).
Tip
The com pone nt vid eo input jacks on t he TV m ay be •
labelled as Y Pb/Cb P r/Cr or Y UV.
•
This t ype of co nnec tio n provides go od pic tur e quality.
English
HDMI IN
HDMI OUT
1 Connect a HDMI cable (not supplied) to the
HDMI OUT jack on this DVD player and the
HDMI input jack on the TV.
Use a HDMI-DVI adaptor in case the TV has •
only a DVI connection.
Note
If the device support s HDM I CEC , you ca n control •
compliant devices w ith a s ingle remote control (see
chapter ‘Use Phil ips Ea syL ink ’).
Option 3: Connect to video (CVBS) jack
VIDEO IN
1 Connect a composite video cable (not supplied)
to the TV OUT jack on this DVD player and
the video input jack on the TV.
Tip
The video input jack on the TV may b e labe lled a s A/ V •
IN, VIDEO I N, CO MPOS ITE or BASEBAN D.
This t ype of co nnec tion provid es st andard picture qua lit y.
•
EN 7
Connect audio cables
Connect the audio from this DVD player to the TV
to allow sound output through the TV.
AUDIO IN
FRONT L
FRONT R
1 Connect the audio cables (not supplied) to the
AUDIO OUT FRONT L/R jacks on this DVD
player and the audio input jacks on the TV.
Route audio to other devices
Route the sound from this DVD player to other
devices to enhance audio play.
Connect to multi channel receiver
MULTI CHANNEL
AUDIO IN
Connect to digital amplifi er/receiver
DIGITAL AUDIO
INPUT
OPTICAL
COAXIAL
COAXIAL
OPTICAL
1 Connect a coaxial cable (not supplied) to the
COAXIAL jack on this DVD player and the
DIGITAL IN (COAXIAL) jack on the device.
or
1 Connect an optical cable (not supplied) to the
OPTICAL jack on this DVD player and the
DIGITAL IN (OPTICAL) jack on the device.
Tip
You can opti mize the audio output (see c hapte r ‘Adjus t •
settings’ - [Audio S etup] > [Digital Audio]) for details.
FRONT L
FRONT R
REAR L
REAR R
FRONT L
FRONT R
CENTER
SUBWOOFER
REAR L
REAR R
CENTER
SUBWOOFER
1 Connect the audio cables (not supplied) to the
AUDIO OUT (FRONT L/R, REAR L/R,
CENTER and SUBWOOFER) jacks on this DVD
player and the audio input jacks on the device.
Tip
You can opti mize the audio output (see c hapte r ‘Adjus t •
settings’ - [Audio S etup] > [A nalogue Output] ) for details.
8 EN
Connect to analogue stereo system
AUDIO IN
FRONT L
FRONT R
1 Connect the audio cables (not supplied) to the
AUDIO OUT FRONT L/R jacks on this DVD
player and the audio input jacks on the device.
Tip
You can opti mize the audio output (see c hapte r ‘Adjus t •
settings’ - [Audio S etup] > [A nalogue Output] ) for details.
Connect USB device
1 Connect the USB fl ash drive to the (USB)
jack on this DVD player.
Note
This DVD player can only play/view M P3, WM A, D ivX, •
JPEG or WMV fi les that are stored o n such devices.
Press
• to access the content and play the fi les.
Connect to power outlet
Warning
Risk of product damage ! Ensu re that the power supply •
voltage cor res ponds to the vo ltage pri nted on the back
or the under side of the DVD p layer.
1 Connect the power cord to the power outlet.
The DVD player is ready to be set up for use.
4 Get started
Prepare the remote control
Caution
Remove batt eri es if th ey are e xhau sted or if the remote •
contr ol is not t o be used for a long time .
•
Do not mi x batteries (old an d new or c arb on and
alkaline, etc.).
Bat teries contain c hemi cal su bst ances , they shoul d be
•
disposed of f prop erl y.
Navigate through the menu
1
Point the remote control directly at the remote
sensor on this DVD player and select the
desired function.
2 Use the following buttons on the remote control
to navigate through the on-screen menus.
Button Action
v V
b B
OK Confi rm a selection.
Move up or down.
Move left or right.
Enter numbers.
English
1 Push to open the battery compartment cover.
2 Insert two R03 or AAA batteries type with
correct polarity (+/-) as indicated.
3 Close the battery compartment.
Find the correct viewing channel
1 Press 2 to turn on the DVD player.
2 Turn on the TV and switch to the correct video-
in channel.
You may go to the lowest channel on the •
TV, then press the Channel Down button
on the TV remote control until you see the
Video In channel.
You may press • ° button repeatedly on the
TV remote control.
Usually this channel is between the lowest •
and highest channels and may be called
FRONT, A/V IN, VIDEO, etc..
EN 9
Tip
See the TV us er man ual on how to sel ect t he cor rec t •
input on the T V.
•
If the audio ou tpu t of this DVD playe r is rou ted to o ther
audio d evice (su ch as au dio syste m or receive r), tur n on
the audio dev ice to th e appr opr iate audio input channel.
Refer to t he dev ice user manual for d etails.
Select menu display language
Note
You can skip this s ett ing if t his DVD player is connected •
to a HDM I CEC complia nt TV. It switches a utomatic ally
to the same OSD menu langua ge as pe r your T V set tin g.
1 Press SETUP.
[General Setup] menu is displayed.
2 Select [OSD Language], then press B.
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
Auto (Eng)
English
The language options are different •
depending on your country or region. It
may not correspond to the illustration
shown here.
3 Press vV to select a language, then press OK.
Tip
You can set the default langua ge for DVD audio a nd disc •
menu, see cha pter ‘Adjust s ett ings’ - [Preferences] for
details.
Turn on Progressive Scan
Connect a progressive scan TV with component video
jacks (see chapter ‘Connect video cables - Option 2:
Connect to component video jacks’ for details).
1 Turn on the TV to the correct viewing channel
for this DVD player.
2 Press SETUP.
3 Press V to select [Video Setup].
4 Select [Progressive] > [On]
A warning message is displayed.
then press OK.
,
Video Setup
TV System
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Setup
On
Off
5 To proceed, select [OK] and press OK.
The progressive setup is complete.
Note
If a blan k/disto rt ed scr een is d isplayed, w ait fo r 15 •
seconds for th e auto r ecove r.
If no pic tur e disp layed , tur n off the prog ressive sc an
•
mode as follow s:
1) Press Z to open t he disc compart ment .
2) Press the
numeric button ‘1’.
6 To exit the menu, press SETUP.
7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
The pr ogre ssive scan sett ing will not be av aila ble wh en •
the HD MI video sig nal is d etec ted.
Duri ng play, when pr ogre ssive scan mode is on for both
•
this DVD player a nd the TV, dis tor ted picture may
displ ay. Turn off t he progressive s can featur e on both this
DVD playe r and the TV.
Use Philips EasyLink
The DVD player supports Philips EasyLink, which uses
the HDMI CEC (Consumer Electronics Control)
protocol. EasyLink-compliant devices that are
connected through HDMI connectors can be
controlled by a single remote control.
Philips does not guarantee 100% interoperability with
all HDMI CEC devices.
1 Turn on the HDMI CEC operations on the TV
and other connected devices. See TVs/devices
manual for details.
2 You can now enjoy the following Philips
EasyLink controls.
One-touch play
When you press the STANDBY button, it turns on
the TV and this DVD player, then video disc play
starts.
10 EN
Loading...