Philips DVP3388 94 User Manual
Register your product and get support at
www.philips.com/welcome
DVP3388
User manual
dvp3388_94_en.indd 1dvp3388_94_en.indd 1 2/19/2009 6:13:13 PM2/19/2009 6:13:13 PM
2
dvp3388_94_en.indd 2dvp3388_94_en.indd 2 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Contents
1 Important 4
Safety and important notice 4
Trademark Notice 5
2 Your DVD player 6
Features highlight 6
Product overview 7
3 Connect 9
Connect video cables 9
Connect audio cables 10
Route audio to other devices 11
Connect USB device 12
Connect to power outlet 12
6 Advanced features 25
Media copy 25
Create MP3 fi les 25
7 Adjust settings 27
General setup 27
Audio setup 28
Video setup 31
Preferences 33
8 Additional information 36
Update software 36
Care 36
9 Specifi cation 37
10 Troubleshooting 39
Contents
4 Get started 13
Prepare the remote control 13
Find the correct viewing channel 14
Select menu display language 14
Turn on Progressive Scan 15
Use Philips EasyLink 16
5 Play 17
Play from disc 17
Play video 18
Play music 21
Play photo 23
Play from USB device 24
11 G lossary 41
3
dvp3388_94_en.indd 3dvp3388_94_en.indd 3 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
1 Important
Recycle notice
Safety and important notice
Warning
•
Risk of overheating! Never install the DVD player
in a confi ned space. Always leave a space of at least
four inches ar ound the DVD player for ventilation.
Ensur e the curt ains or other objec ts never cover the
ventilation slots on the DVD player.
•
Never place the DVD player, remote control or
batteries near naked fl ames or other heat sources,
including direct sunlight.
•
Only use this DVD player indoors. Keep this DVD
player away from water, moisture and liquid-fi lled
objects.
Never place this DVD player on other electr ical
•
equipment.
Keep away from this DVD player during lightning
•
storms.
•
Wher e the mains plug or an appliance coupler is
used as the disconnect device, the disconnec t device
shall remain readily operable.
•
Visible and invisible laser radiation when open. Avoid
exposure to beam.
About Progressive Scan
Consumers should note that not all high
defi nition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525 or 625
progressive scan picture problems, it is
recommended that the user switch the
connection to the ‘standard defi nition’ output. If
there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
This electronic equipment contains a large
number of materials that can be recycled or
reused if disassembled by a specialized
company. If you are disposing of an old
machine, please take it to a recycling center.
Please observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
Copyright notice
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
4
dvp3388_94_en.indd 4dvp3388_94_en.indd 4 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Trademark Notice
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
DivX, DivX Ultra Certifi ed, and associated
logos are trademarks of DivX, Inc. and are used
under license.
Offi cial DivX® Ultra Certifi ed product.
HDMI, and HDMI logo and High-Defi nition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Important
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media fi les and the DivX® Media Format.
Plays DivX® video with menus, subtitles and
audio tracks.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
5
dvp3388_94_en.indd 5dvp3388_94_en.indd 5 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
2 Your DVD
ALL
player
Screen fi t
View the movie in full screen on any TV with
this DVD player.
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.philips.com/welcome.
This DVD player offers higher picture quality
video play for an amazing viewing experience.
Features highlight
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD player offers full high-defi nition video play
up to 1080p resolution for an amazing viewing
experience. A highly detailed picture and
increased sharpness delivers a more true-to-life
picture.
EasyLink
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
Hi speed USB 2.0 link
Simply plug your USB fl ash drive into the USB
jack to play your MP3/WMA/JPEG/DivX/WMV
fi les to enjoy the music play in superb sound
quality.
Media copy
You can transfer data fi les such as MP3, WMA
and JPEG from disc to USB fl ash drive.
Create MP3 fi les
Convert your favourite audio tracks from an
audio CD into MP3 format. The created MP3
fi les are saved in your USB device.
Region codes
Your DVD player plays discs with the following
region codes.
DVD region code Countries
India
Note
EasyLink (HDM I CEC) is only applicable with certain •
criteria. Terms and conditions may vary by produc t.
Consult your product dealer for information.
•
Philips does not guarantee 100% interoper ability
with all HDMI CEC devices .
6
dvp3388_94_en.indd 6dvp3388_94_en.indd 6 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Product overview
Remote control
Main unit
a 2 (Standby-on)
Turn on the DVD player or switch to •
standby mode.
b Disc compartment
c Display panel
d Z (Open/Close)
Open or close the disc compartment.•
e u (Play/Pause)
Start, pause or resume disc play.•
f (USB) jack
Connect a USB fl ash drive.•
1
2
3
4
5
31 2
6
5
4
6
7
8
9
10
18
17
16
15
14
13
12
11
Your DVD player
a 2 (Standby-On)
Turn on the DVD player or switch to •
standby mode.
b Z (Open/Close)
Open or close the disc compartment.•
c DISC MENU
Access or exit the disc menu.•
Switch to disc mode.•
For VCD/SVCD, turn PBC (Playback •
Control) on or off in PBC mode.
7
dvp3388_94_en.indd 7dvp3388_94_en.indd 7 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
d v V b B (Navigation buttons)
Navigate through the menus.•
Search fast-forward (• B) or fast-
backward (b). Press repeatedly to
change the search speed.
Search slow-forward (• v) or slowbackward (V). Press repeatedly to
change the search speed.
l REPEAT/REPEAT A-B
Toggle between various repeat modes.•
Mark the section for repeat play, or turn •
off repeat mode.
m AUDIO/CREATE MP3
Select an audio language/channel.•
Access the menu to create MP3.•
e BACK
Return to the previous display menu.•
For DVD, navigate to the title menu.•
For VCD version 2.0 or SVCD with •
PBC turned on, return to the menu.
f í/ë (Previous/Next)
Skip to the previous or next title, •
chapter, or track.
Press and hold for fast-backward or •
fast-forward search.
g (USB)
Switch to USB mode and display the •
content.
h Numeric buttons
Select an item to play.•
i SUBTITLE
Select DVD or DivX subtitle language.•
Access the menu to USB copy or USB •
delete.
j , ZOOM
Fit the picture format to the TV screen.•
Zoom in or out of the picture.•
n x (Stop)
Stop disc play.•
o u (Play/Pause)
Start, pause or resume disc play.•
p INFO
For disc, display the current status or •
disc information.
For slideshows, display a thumbnail view •
of photo fi les.
q OK
Confi rm an entry or selection.•
r SETUP
Access or exit the setup menu.•
k VOLUME
Display the current volume level and •
use (b) or (B) navigation buttons to
set the volume level between 0 ~ 20.
8
dvp3388_94_en.indd 8dvp3388_94_en.indd 8 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
3 Connect
Select the best video connection that the TV can
support.
Make the following basic connections to use the
DVD player.
Basic connections:
Video cables•
Audio cables•
Optional connections:
Audio to other devices:•
Multi channel receiver•
Digital amplifi er/receiver•
Analog stereo system•
Note
Refer to the type plate at the r ear or bottom of the •
product for identifi cation and supply r atings.
•
Befor e you make or change any connections, ensure
that all the devices are disconnec ted from the power
outlet.
Tip
Different types of connectors may be used to •
connect this product to your TV, depending on
availabili ty and your needs. A compre hensive
interactive guide to help you connect your produc t is
available at www.connectivityguide.philips.com.
Option 1:• Connect to HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
Option 2:• Connect to component video
jacks (for a standard TV or Progressive Scan
TV).
Option 3:• Connect to video (CVBS) jack
(for a standard TV).
Note
You must connect this • DVD player directly to a
TV.
Option 1: Connect to HDMI jack
HDMI IN
HDMI OUT
1 Connect a HDMI cable (not supplied) to
the HDMI OUT jack on this DVD player
and the HDMI input jack on the TV.
Use a HDMI-DVI adaptor in case the •
TV has only a DVI connection.
Connect
Connect video cables
Connect this DVD player to the TV to view
disc play.
dvp3388_94_en.indd 9dvp3388_94_en.indd 9 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Note
If the device suppor ts HDMI CEC, you can control •
compliant devices with a single remote control (see
chapter ‘Use Philips Eas yLink’ ).
Tip
This type of connections provide best picture quality.•
9
Option 2: Connect to component
video jacks
Pb
Pr
Y
Pr
Y
COMPONENT VIDEO OUT
Pb
COMPONENT
VIDEO IN
1 Connect the component video cables (not
supplied) to the Y Pb Pr jacks on this DVD
player and the component video input
jacks on the TV.
If a progressive scan TV is used, you •
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
Tip
The component video input jacks on the T V may be •
labeled as Y Pb/Cb Pr/Cr or YUV.
This type of connection provides good picture
•
quality.
Option 3: Connect to video (CVBS)
jack
VIDEO IN
1 Connect a composite video cable
(supplied) to the TV OUT jack on this
DVD player and the video input jack on
the TV.
Tip
The video input jack on the T V may be labeled as •
A/ V IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard pic ture
•
quality.
Connect audio cables
Connect the audio from this DVD player to the
TV to allow sound output through the TV.
AUDIO IN
FRONT L
FRONT R
1 Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R jacks on this
DVD player and the audio input jacks on
the TV.
10
dvp3388_94_en.indd 10dvp3388_94_en.indd 10 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Route audio to other devices
Route the sound from this DVD player to other
devices to enhance audio play.
Connect to multi channel receiver
MULTI CHANNEL
AUDIO IN
Connect to digital amplifi er/receiver
DIGITAL AUDIO
INPUT
OPTICAL
COAXIAL
COAXIAL
OPTICAL
Connect
FRONT L
FRONT R
REAR L
REAR R
FRONT L
FRONT R
CENTER
SUBWOOFER
REAR L
REAR R
CENTER
SUBWOOFER
1 Connect the audio cables (not supplied) to
the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this DVD player and the audio input
jacks on the device.
Tip
You can optimize the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output
]) for details.
1 Connect a coaxial cable (not supplied) to
the COAXIAL jack on this DVD player
and the DIGITAL IN (COAXIAL) jack on
the device.
or
1 Connect an optical cable (not supplied) to
the OPTICAL jack on this DVD player and
the DIGITAL IN (OPTICAL) jack on the
device.
Tip
You can optimize the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio
]) for details.
11
dvp3388_94_en.indd 11dvp3388_94_en.indd 11 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Connect to analog stereo system
AUDIO IN
FRONT L
FRONT R
Connect USB device
1 Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R jacks on this
DVD player and the audio input jacks on
the device.
Tip
You can optimize the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output
]) for details.
1 Connect the USB fl ash drive to the
(USB) jack on this DVD player.
Note
This DVD player can only play/view MP3, WMA , •
DivX, JPEG or WMV fi les that are s tored on such
devices.
• to access the content and play the fi les.
Press
Connect to power outlet
Warning
Risk of product damage! Ensure that the power •
supply voltage cor responds to the voltage printed on
the back or the under side of the DVD player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
12
dvp3388_94_en.indd 12dvp3388_94_en.indd 12 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
4 Get started
Prepare the remote control
1 Push to open the battery compartment
cover.
2 Insert two R03 or AAA batteries type with
correct polarity (+/-) as indicated.
Navigate through the menu
1 Point the remote control directly at the
remote sensor on this DVD player and
select the desired function.
Get started
2 Use the following buttons on the remote
control to navigate through the on-screen
menus.
3 Close the battery compartment.
Caution
Remove batteries if they are exhausted or if the •
remote control is not to be used for a long time.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries cont ain chemical subs tances, they should
•
be disposed of properly.
dvp3388_94_en.indd 13dvp3388_94_en.indd 13 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Button Action
v V
b B
OK
Move up or down.
Move left or right.
Confi rm a selection.
Enter numbers.
13
Find the correct viewing
channel
Press 2 to turn on the DVD player.
1
2 Turn on the TV and switch to the correct
video-in channel.
You may go to the lowest channel on •
the TV, then press the Channel Down
button on the TV remote control until
you see the Video In channel.
You may press • ° button repeatedly
on the TV remote control.
Usually this channel is between the •
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
Tip
See the TV user manual on how to select the correct •
input on the T V.
If the audio ou tput of this DVD player is routed
•
to other audio device (such as audio system
or receiver), turn on the audio device to the
appropriate audio input channel. Refer to the device
user manual for details.
Select menu display language
Note
You can skip this setting if this DVD player is •
connected to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language as
per your TV setting.
1 Press SETUP.
[ General Setup ] menu is displayed.
2 Select [ OSD Language ], then press B.
General Setup
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
The language options are different •
depending on your country or region.
It may not correspond to the illustration
shown here.
Auto (Eng)
English
3 Press vV to select a language, then press
OK.
Tip
You can set the default language for DVD audio •
and disc menu, see chapter ‘Adjust settings’ - [
Preferences ] for details.
14
dvp3388_94_en.indd 14dvp3388_94_en.indd 14 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Turn on Progressive Scan
Connect a progressive scan TV with
component video jacks (see chapter ‘Connect
video cables - Option 2: Connect to
component video jacks’ for details).
1 Turn on the TV to the correct viewing
channel for this DVD player.
2 Press SETUP.
3 Press V to select [ Video Setup ].
7 You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Note
The progressive scan setting will not be available •
when the HDMI video signal is detected.
During play, when progressive scan mode is on for
•
both this DVD player and the TV, distorted picture
may display. Turn off the progressive scan feature on
both this DVD player and the TV.
Get started
4 Select [ Progressive ] > [ On ]
then press
,
OK.
A warning message is displayed.
Video Setup
TV System
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Setup
On
Off
5 To proceed, select [ OK ] and press OK.
The progressive setup is complete.
Note
If a blank/distorted screen is displayed, wait for 15 •
seconds for the auto recover.
•
If no pic ture displayed, turn of f the progressive scan
mode as follows:
1) Press Z to open the disc compar tment.
2) Press the numeric button ‘1’.
6 To exit the menu, press SETUP.
15
dvp3388_94_en.indd 15dvp3388_94_en.indd 15 2/19/2009 6:13:14 PM2/19/2009 6:13:14 PM
Loading...