Philips DVP3150V-37B, DVP3150V Quick start guide

There are many ways to connect your new DVD/VCR to your Television and other equipment.This Quick Start
Guide shows the easiest, most common connection.
Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or
picture if your TV and/or audio system is compatible.

REAR OF TV

(EXAMPLE ONLY)

IN

OUT

OR

ANTENNA IN

AUDIO IN

VIDEO IN

L

R

4

Audio Cables

3

RF COAXIAL CABLE

5

Video Cable

Audio and Video IN Jacks on TV

2

Antenna or Cable TV Signal to ANT-IN Jack

CABLE BOX

(Optional)

CABLE TV SIGNAL

ANTENNA or

CABLE TV SIGNAL

DVP3150V/37

1

Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.

2

Connect your Antenna TV signal or, if you have a Cable Box/Satellite Receiver, the OUT jack of your Cable
Box/Satellite Receiver to the ANT-IN jack on the rear of the DVD/VCR using the supplied RF coaxial cable.

3

Connect another RF coaxial cable (not supplied) to the DVD/VCR’s ANT-OUT jack and to your TV’s
ANTENNA IN jack.

The TV’s ANTENNA IN jack may be labelled 75-ohm,TV IN, or RF IN.Check your TV manual for details

.

4

Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT jacks on
the DVD/VCR and to the red and white AUDIO IN jacks on the TV.

5

Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to
the VIDEO IN jack on the TV. The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS, Composite,

or Baseband video.

6

Plug the power cords of the DVD/ VCR and the TV into an active power outlet.

7

Turn on the TV and set it to the correct Audio/Video In channel.

8

Press STANDBY-ONy on the DVD/ VCR or its remote control to turn on the DVD/ VCR. The first time
you turn on the DVD/VCR, you should complete the First-time DVD/VCR Setup. See the other side of
this Quick Start Guide for details.

H982NUD_QSG_EN 2/28/06 12:37 PM Page 1

Playable Discs

The DVD Player of the DVD/ VCR will play the following Discs.

is a trademark of DVD Format/Logo Licensing Corporation.

Windows Media is a trademark of Microsoft Corporation.

DVDs must have a Region Code of ALL regions or Region 1.

8239 300 48191

1VMN22817*****

H982NUD

Quick Start Guide (cont’d)Quick Start Guide (cont’d)

Playing a Disc

1

Turn on the TV and set it to the correct Audio/Video In
channel.

2

With the TV and DVD/VCR turned on, press DVD to put
the DVD/ VCR in DVD mode.

3

Press OPEN/CLOSE A to open the disc tray.

Put a Disc in the tray with the label facing up and the shiny side
facing down.

Press PLAY B to close the disc tray.

4

Playback may start automatically. If not, press PLAY B.

If a DVD Disc menu appears, use the s BKL, OK, or Number
buttons to select features or start playback. Follow the
instructions in the menu.

5

To stop playing a Disc, press STOP C.

First-Time DVD/VCR Setup

1

Turn on the TV and set it to the correct Audio/Video In
channel.

2

Press VCR, then press STANDBY-ONy.VCR light will appear on
the front of the DVD/VCR. The TV display shown below will appear.

3

Press K or L to select ENGLISH, FRANCAIS (French), or
ESPAÑOL (Spanish) as the language for VCR on-screen
displays. Then, press B.

4

The AUTO SET UP message will appear. Press B to set up TV
channels for the VCR. When setup is complete, the lowest TV

channel will appear on the TV.

Turn on the TV and set it to the
correct Audio/Video In channel.

3-4

2

1

3

5

2

4

STANDBY-ON

PLAY

DVDVCR VCR/TV

OK

MENU MENU

DISC/VCR

RETURN TITLE

A-B

CLEAR/RESET SLOW

SUBTITLE ZOOM

ANGLE

REPEAT REPEAT

AUDIO

SEARCH MODE

DISPLAY

SKIP / CH

SYSTEM

PAUSESTOP

MARKER RECORDTIMER SET

NEED HELP! Visit our website at www.philips.com/usasupport

DVDs must be recorded in either the NTSC or PA L color system.
Your TV must also have the NTSC or PAL color system.

LANGUAGE SELECT

B ENGLISH [ON]

FRANCAIS
ESPAÑOL

PUSH B

AUTO SET UP

PUSH B

H982NUD_QSG_EN 2/28/06 12:37 PM Page 2

STANDBY-ON

SEARCH MODE

STANDBY-ON

VIDEO AUDIOLR

REW F.FWD PLAY

DISPLAY

REPEAT REPEAT

AUDIO

A-B

SUBTITLE ZOOM

ANGLE

RETURN TITLE

CLEAR/RESET SLOW

VCR VCR/TV

DISC/VCR

MENU MENU

OK

PLAY

MARKER RECORDTIMER SET

SPEED

1 2 3

5

4

6

90+10

8

ONE TOUCH RECORDING • LONG PLAY

REC CHANNELSTOP/EJECT

DVD

SYSTEM

PAUSESTOP

SKIP / CH

7

OPEN/CLOSE

VCR DVD

SOURCE

DVP 3150V DVD PLAYER/VCR

STOP PLAY

DVD

ALL

1