Philips DVP3020X, DVP3020X-94 User Manual

DVP 3020
DVD Video Player
Quick Start Guide
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
Quick Start Guide
VIDEO IN
(CVBS)
1
Connect
A Use the supplied composite video cable (yellow plug)
to connect the DVD player’s Video Out (CVBS) socket to the Video In socket (or labeled as A/V In, Video In, Composite or Baseband) on the TV.
B To hear the sound of this DVD player from the TV,
use the supplied audio cables (red and white plugs) to connect {AUDIO OUT L/R} sockets of the DVD player to the corresponding Audio In sockets on the TV.
C Plug in the power cable from the DVD player to an
AC power outlet.
Note See the accompanying user manual for other
possible connections (e.g. Component Video).
Basic Connection
A
Audio/Video connection to TV
Video cable
(yellow plug)
To Video In socket on the TV
To Audio In socket on the TV
From Video Out socket on the DVD Player
From Audio Out sockets on the DVD player
Audio cables
(red & white plugs)
DVP3020
VIDEO IN
VIDEO IN
(CVBS)
(CVBS)
1_dvd3020_qsg_94_eng1.indd 11_dvd3020_qsg_94_eng1.indd 1 2006-04-03 4:35:31 PM2006-04-03 4:35:31 PM
3
Enjoy
Need help?
User Manual
For more product information refer to the user manual of the DVD player
Online
Go to www.philips.com/support
2005 C Koninklijke Philips N.V. All rights reserved. www.philips.com
SL/0612/94_02
2
Set up
A
Finding the viewing channel
A Press 2 on the DVD player’s remote control. B Switch on the TV. C Press SETUP on the DVD player’s remote control.
Display Dim
OSD Language ENGLISH
Sleep
- - General Setup Page - -
Melayu
D Press ‘0’ on the TV’s remote control, then repeatedly
press the Channel Down button until you see the DVD background screen. This is the correct viewing channel for the DVD player.
Note For some TVs, to  nd the correct viewing channel, you can keep pressing the AV or SELECT buttons, If still unable to  nd the correct viewing channel, check the connections again or check your TV’s user manual.
B
Language preference setup
Use the DVD player’s remote control
to select the desired On-screen language, Audio language, Subtitle language and Menu language
you preferred.
Selecting On-screen language
A
Press X to select {General Setup Page}.
B Press S
T
to highlight {OSD Language}, then press X.
Display Dim
OSD Language ENGLISH
Sleep
- - General Setup Page - -
Melayu
C Press S
T
to select a language and press OK.
Note The On-screen language for the setup menu will
remain once you set it, regardless of various disc languages.
A
Start playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1) Press S T W X to scroll through the options
available in the DVD menu.
2) Press PLAY/PAUSE XÅ on the option you
want to start playback
B Press PLAY/PAUSE
to
start playback.
C To stop playback, press
STOP Ç.
D Press DISC MENU to go
back to the disc menu anytime.
Troubleshooting
For more troubleshooting tips, see the user manual.
No power
Check if the AC power cord is properly connected.
Press the STANDBY-ON on the front of the DVD player to turn on the power.
No picture
• Check connection to TV and ensure the plugs are  rmly in place.
No sound or distorted sound
• Adjust the volume
• Check audio connections are in the correct input source.
Remote control does not work
• Check the batteries are loaded correctly or replace the batteries with new ones.
• Reduce the distance between the remote control and the DVD player.
• Point the remote control directly toward the IR sensor.
1_dvd3020_qsg_94_eng1.indd 21_dvd3020_qsg_94_eng1.indd 2 2006-04-03 4:35:43 PM2006-04-03 4:35:43 PM
Loading...