DVD Player
DVP2702
Register your product and get support at
www.philips.com/welcome
For further assistance, call the customer
User Manual
• To obtain assistance, contact Philips Customer
support service in your country.
Care Center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin
Islands; 1- 866-515-1124
PRECAUTIONS
Supplied Accessories
• Remote Control (NC091UL)
• Audio / video cables
• Quick Start Guide
Connecting to RF Modulator (Not Supplied)
If your TV has “Antenna In (RF in)” jack only, it is still
possible to connect this unit to your TV by using an RF
Modulator.
In this case, follow the instructions below.
1) Disconnect the Power cords of the devices from the
AC outlet.
2) Make the Connection as illustrated below.
3) Set your RF Modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least
used in your area. If your RF Modulator has a
Modulator / Antenna switch, set it according to the
manual supplied with the RF Modulator.
4) Plug in the Power cords of the devices to an AC outlet.
5) Turn On your TV and choose the same channel as
you set to the RF Modulator’s channel 3/4 switch
to. For more details, follow the manual supplied with
the RF Modulator.
Rear of this unit
VHF / UHF
antenna
Cable TV
company
or
RF coaxial
If your TV only has an Antenna input
(no A/ V inputs), you will need an
RF Modulator (NOT INCLUDED) to
connect this player.
RF Modulator
Video cable
Audio cable
Rear of your RF
Modulator
cable
Set channel 3 or 4
No Antenna (RF) Output!
Rear of TV
RF coaxial cable
TV
Note(s):
• RF Modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF Modulator.
Contents
PRECAUTIONS
IMPORTANT SAFETY INSTRUCTIONS ..........................................................3
About the Discs ....................................................................................................... 6
Playable Discs....................................................................................................6
Unplayable Discs. ............................................................................................ 6
SETUP
Connections ...............................................................................................................7
Rear Terminals. ...................................................................................................7
Connection to a TV. ........................................................................................ 8
Connection to an Audio System. ............................................................ 9
About the Remote Control ............................................................................... 10
Remote Control............................................................................................... 10
Installing the Batteries for the Remote Control. ........................... 10
DVD FUNCTIONS
Playback .....................................................................................................................11
JPEG Playback .......................................................................................................12
Search Functions ...................................................................................................12
Using Track / File Search. ...........................................................................12
Using Title / Chapter Search. ....................................................................12
Using Time Search. .........................................................................................12
On-Screen Display ................................................................................................ 13
Repeat / Random Playback ............................................................................14
Repeat Playback. ............................................................................................14
Repeat A-B Playback. ..................................................................................14
Random Playback. .........................................................................................14
Special Settings ......................................................................................................15
Subtitle Language. ..........................................................................................15
Audio Language. .............................................................................................15
Camera Angles. ................................................................................................15
DVD Settings ............................................................................................................16
System Settings................................................................................................17
Language Settings. .........................................................................................18
Audio Settings. ................................................................................................. 19
Video Settings. ................................................................................................ 20
Preference Settings........................................................................................21
INFORMATION
Troubleshooting Guide ......................................................................................22
Specifications .........................................................................................................22
LIMITED WARRANTY..........................................................................................23
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note and rating are located on the rear or
bottom of the cabinet.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
The symbol for CLASS ll (Double Insulation)
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio / TV technician for help.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments / accessories specified by
the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart / apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Continued on next page.
Disconnect the mains(AC) plug to shut off when find trouble or not in use. The mains(AC) plug shall remain readily
operable.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire
or the like.
LASER SAFETY
This apparatus is classified as a CLASS 1 LASER PRODUCT.
This apparatus employs a laser. Only a qualified service person should remove the cover or
attempt to service this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates
copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a
book cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth,
curtain, newspaper, etc. Make sure to leave a space of 4.0 inches (10cm) or more around this apparatus.
When installing this unit in a temperate environment, avoid a place with rapid temperature changes.
This unit should not be used in a tropical environment as it has not been evaluated under such conditions.
No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects.
Never use a gas duster on this unit.
The gas trapped inside of this unit may cause ignition and explosion.
To Avoid the Hazards of Electrical Shock and Fire
• Do not handle the AC power cord with wet hands.
• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
–The unit is moved from a cold place to a warm place.
–Under conditions of high humidity.
–After heating a cold room.
Note about Recycling
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
• For product recycling information, please visit - www.recycle.philips.com
Notice for Progressive Scan Output
• Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard definition’ output.
Disposal of Used Batteries
• In certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of batteries
according to local regulations.
EN
–
–
4
TRADEMARK INFORMATION
Manufactured under license
from Dolby Laboratories. Dolby,
™
AUDIO
ENERGY STAR® is a joint program of the
U.S. Environmental Protection Agency
and the U.S. Department of Energy
helping us all save money and protect
the environment through energy efficient
products and practices.
is a trademark of DVD Format / Logo
Licensing Corporation.
Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
SYMBOLS USED IN THIS MANUAL
The following symbols appear in some headings in this manual.
: Description refers to DVD-video.
: Description refers to audio CD.
: Description refers to DVD, CD-RW/-R with JPEG
files.
MAINTENANCE
Servicing
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 22. If you cannot find any solution
there, our service center is pleased to assist you.
• Even if this unit becomes inoperative, Do Not open
the cabinet to repair it by yourself. There are No userserviceable parts inside.
Turn Off the unit, unplug the AC Power plug and then call
our support center mentioned on the front page.
Before calling, please check Model and Serial number on
the unit.
Cleaning the Cabinet
• Wipe the front panel and other exterior surfaces of the unit
with a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the
unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Cleaning Discs
• When a disc is dirty, clean it with a cleaning cloth. Wipe the
disc from the center to the outside. Do not wipe in a circular
motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
Cleaning the Disc Lens
Depends on unit circumstances, the laser optical pickup unit’s
Disc Lens may get dirty.
If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in this
owner’s manual, consult a local dealer or an authorized service
center for inspection and cleaning of the Disc Lens.
Disc Handling
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in use.
EN
–
–
5
About the Discs
Playable Discs
Type of
media
DVD-video
*1, 2, 4, 6, 8
DVD-RW
DVD-R
*1, 3, 4, 5,
6, 7, 8
audio CD
*4, 6, 8
Mark (logos)
Region
codes
or
Recorded
signals
digital video
(MPEG2)
digital video
(MPEG2)
or JPEG
digital audio
Disc sizes Disc types
5 inches
(12 cm)
or
3 inches
(8 cm)
5 inches
DVD-Video
DVD
JPEG
audio CD
e.g.)
chapter 1 chapter 2 chapter 1
e.g.)
chapter 1 chapter 2 chapter 1
e.g.)
e.g.)
title 1 title 2
chapter 3 chapter 4
title 1 title 2
chapter 3 chapter 4
folder 1 folder 2
file 1
track 1 track 2 track 5
file 3
file 2 file 1
track 3
file 4
track 4
chapter 2
chapter 2
file 2
track 6
(12 cm)
or
CD-RW
CD-R
*4, 5, 6, 7, 8
digital audio
or JPEG
3 inches
(8 cm)
JPEG
e.g.)
folder 1 folder 2
file 1
file 2 file 1
file 3
file 4
file 2
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them back.
Even if they are played back, the sound or video quality will be compromised.
*7: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back.
*8: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs as a malfunction may result!
DVD-audio / DVD-RAM / DVD-ROM for personal computers / DVD with region codes other than 1 or ALL /
CD-ROM for personal computers / HD DVD / Blu-ray Disc™ / photo CD / CD-i / video CD
Any other discs without compatibility indications.
Note(s):
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD
layer cannot be delivered.
EN
–
–
6
Connections
Rear Terminals
SETUP
2 1
3
AUDIO OUT jacks
1
COAXIAL DIGITAL OUT jack
2
VIDEO OUT jack
3
Connect an Audio cable here through the Audio Input jacks on a Television or another
Audio device.
Connect a Digital Audio Coaxial cable here through the Digital Audio Coaxial Input jack
on a decoder or audio receiver.
Connect a Video cable here through the Video Input jack on a Television.
Note(s):
• Please purchase the necessary cables at your local store. (Refer to pages 8 - 9.)
EN
–
–
7
Connection to a TV
TV
This unit
VIDEO OUT
VIDEO IN
Video cable
(supplied)
and
AUDIO OUT
(Analog Audio)
This unit
TV
AUDIO IN
L
R
Audio cable
(supplied)
Supplied cables used in this connection are as follows:
• Audio cable (L/R) × 1
• Video cable × 1
Note(s):
• Connect this unit directly to your TV.
If Audio / Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
After connecting to your TV:
You will need to find the viewing channel (external input channel) on your TV.
Please refer to your TV’s Owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
Philips: VIDEO, SOURCE
Emerson: VIDEO, AUX
Hitachi: INPUT, AUX
JVC: VIDEO, VIDEO1, VIDEO2, VIDEO3
LG: INPUT, AUX
Magnavox: AUX CHANNEL, SOURCE
Panasonic: TV/VIDEO
RCA: INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung: TV/VIDEO
Sanyo: VIDEO
Sharp: 00
Sony: VIDEO1, VIDEO2, VIDEO3
Toshiba: TV/GAME
EN
–
–
8
Connection to an Audio System
Analog Audio Connection
Stereo system with Analog Audio Input jacks
Audio
Audio cable (supplied)
Analog Audio
Input jacks
This unit
AUDIO OUT
Supplied cables used in this connection are as follows:
• Audio cable (L/R) × 1
Please purchase the rest of the necessary cables at
your local store.
Digital Audio Connection
AV receiver / amplifier with a Coaxial input
jack
COAXIAL
DIGITAL IN
Coaxial input jack
Digital Audio Coaxial cable
COAXIAL DIGITAL OUT
Connection
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to the other device
(an MD deck etc.)
without Dolby Digital decoder.
(not supplied)
Setting
[SETUP] “Audio”
“Digital Audio”
“Bitstream”
“PCM”
Note(s):
• The audio source on a disc in a Dolby Digital multichannel surround format cannot be recorded as digital
sound by an MD deck.
• By hooking this unit up to a Dolby Digital decoder, you
can enjoy high-quality Dolby Digital multi-channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
EN
–
–
9
About the Remote Control
Remote Control
Installing the Batteries for the
Remote Control
Install 2 AAA (1.5V) batteries matching
the polarity indicated inside battery
compartment of the remote control.
* Batteries not supplied.
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
–Line of sight:
approx. 23 feet (7m)
–Either side of the center:
approx. 16 feet (5m) within 30°
–Above: approx. 16 feet (5m) within 15°
–Below: approx. 10 feet (3m) within 30°
Note(s):
• Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nicad, ni-mh, etc) batteries.
• Do not mix old and new batteries.
• Always remove batteries from remote
control if they are dead or if the
remote control is not to be used for
an extended period of time. This will
prevent battery acid from leaking into
the battery compartment.
Media
Button
(Alphabetical order)
• To move the Cursor.
• To enter values in the input field.
• To switch between pages when
------
• To Repeat between your chosen points A and B. (DVD) (CD)
• To select Camera Angles on a
disc.
• To select Audio language on
a disc.
• To Display the current disc information.
• To Select Items or Settings.
• To Search Forward / Backward through a disc. ×2, ×4, ×8, ×20 DVD
CD
• To Begin Slow Forward
Playback in the Pause mode.
• To Call up the menu on a disc.
------ • T o Play Back Randomly. (CD)
• To Open or Close the Disc tray.
• To turn On the unit.
• To Pause disc Playback.
• To Advance Playback one
Frame at a time.
• To Start Playback or Resume Playback.
• To Play Back a Chapter, Title or
Disc Repeatedly.
• To Call up the Menu when
Playing Back a disc.
• To Search Chapter, Title or Time.
• To select button in menu. (DVD)
• To Call up the Setup menu.
• To Skip Chapters or Titles.
• To Turn the unit On or to Turn the unit into the Standby mode.
To Completely turn Off the unit, you must Unplug the AC Power cord.
• To Stop Playback.
• To Select Subtitle Language on
a disc.
• To Call up the Title Menu on
a disc.
• To Magnify part of a Picture. (×1.5, ×2, ×2.5) (DVD) (JPEG)
a file list is displayed.
• To Rotate the picture during
playback of JPEG Files. (JPEG)
------
------
------
• To Display the Thumbnail
when a disc with JPEG Files
is inserted and the File is
highlighted. (JPEG)
------
• To Play Back Repeatedly.
• To Return to the File List when
Thumbnail is displayed. (JPEG)
• To Search Tracks or Files.
• To Search Time. CD
• To Skip Tracks.
• To Switch between pages
when Thumbnail is displayed.
(JPEG).
------
------
EN
–
10
–
DVD FUNCTIONS
Please note :
• Most instructions in this manual refer to Remote Control use.
• This unit will automatically turn On the Screen Saver after 5 minutes of inactivity and into the Standby mode after 25
minutes of inactivity.
Playback
Before:
Turn On the TV, Amplifier and any other Device(s) which are
connected to this unit. Make sure the TV and Audio Receiver
(not supplied) are set to the correct Channel/Input.
facing up.
on page 12
)
2
2
1
(
Press [ y ] to turn on this unit.
1
2
Press [ A ] and insert a disc with label
3
Press [ B ] to start playback.
Press [ C ] to stop playback.
4
3
4
Disc Menu
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / 0 / 1] to select an item, then press [OK],
[ B ] (on the unit).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the Disc menu.
• Press [TOP MENU] to call up the Title menu.
Note(s):
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume Playback
Note(s):
• When you Play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 12.
• “ This operation is not available.” may appear at the Topleft on the TV Screen when the operation is prohibited by
the disc or this unit.
• Some DVD may Start Playback from title 2 or 3 due to
specific programs.
• During the Playback of a 2-layered disc, pictures may Stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is Not a Malfunction.
• You can change the On-screen language in “Menu”
setting. (Refer to page 18.)
Fast Forward / Reverse Search
Use [ g ] or [ h ] Repeatedly during
Playback to select the required Forward or
Reverse Speed.
To continue Playback, press [ B ] .
Note(s):
• Fast Forward or Reverse Search speed is different depending
on the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Slow Forward Search
Lights up when power is On.
2 1
X2
Press [ C ] during Playback. PRE STOP icon
will appear at the top-left on the TV screen.
Press [ B ] . RESUME icon will appear at the
top-left on the TV screen and Playback will
Resume from the Point where Playback was
Stopped.
PRE STOP
Note(s):
• To Cancel Resume, press [ C ] one more time in the Stop
mode.
• The Resume Playback information stays in unit Memory
even when the Power is turned Off, as long as the Disc
stays in the unit.
Pause and Step-by-Step Playback
Press [ F ] during playback.
To continue Playback, press [ B ] .
The disc goes forward by one Frame each time [ F ] (on the
remote control) is pressed in the Pause mode.
To continue Playback, press [ B ] .
EN
Press [ g ] Repeatedly in the Pause mode
to select the required Forward speed.
To continue Playback, press [ B ] .
Note(s):
• Slow Forward speed is different depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Zoom
1) Press [ZOOM] Repeatedly during
Playback
to select the required Zoom factor:
×1.5, ×2 or ×2.5.
2) Use [K / L / 0 / 1] to Slide the Zoomed Picture across the
TV Screen.
3) To Exit the Zoom function, press [ZOOM] Repeatedly to
select “ZOOM 1”(Off).
Note(s):
• Zooming function does not work while the Disc Menu is
displayed.
• Some Part of the Picture may not be Zoomed depending
on the Disc or Playback status.
–
–
11
SF 1/2
ZOOM 2
JPEG Playback
Track02
Track03
Track01
Music
CDDA 0 0 : 0 2 : 3 4TRK 0 1 / 1 2
Music
Title 0 0 : 0 2 : 3 402/44 Chapter 001/027
Music
Title 02/ 4 4 Chapter 00 1/ 02 7 0 0 : 0 2 : 3 4
JPEG is a method of compressing data in files.
You can copy JPEG files on DVD or CD-R/-RW from a computer and Play back the Files on this unit.
Insert a JPEG formatted disc, then the File List will automatically appear on the TV screen. (For a disc with JPEG files only)
It is recommended that the files are recorded under the following conditions :
1 Select the desired Folder or File.
Photo
[ C:/ ]
Reso :
800x600
Size :
118KB
Date :
None
Folder_1
Folder_2
Folder_3
Photo_1.jpg
Photo_2.jpg
Photo_3.jpg
Photo_4.jpg
Photo_5.jpg
2 Press [OK] or [ B ] (on the unit).
Playback will Start from the first File
of the Folder or Files.
Search Functions
Applicable JPEG file Remarks
Normal playback
Pixel upper limit: 6,000 × 6,000 pixel
Pixel lower limit: 96 × 96 pixel
A JPEG image that extends beyond the screen
is reduced so that it will be displayed within the
screen.
Note(s):
• Some selections may take a while to be recognized.
• Refer to “On-Screen Display” on page 13 for more details.
• A Maximum of 189 folders or 9999 files may be recognized on One disc.
(ISO9660 format files)
For UDF format files recorded on DVD Media, maximum of 2,000 files may be
recognized. It may take a while to switch between pages for a file list.
• Up to 8 hierarchies can be recognized in one folder.
File in the 9th or deeper hierarchies cannot be played back.
• To Rotate the Picture, press the Cursor buttons during Playback of JPEG Files.
Using Track / File Search
Using Title / Chapter Search
Using [SEARCH/NUMBER]
1 1
Available Search Mode
Track Search
File Search
Displayed list
File list / Thumbnail
2 Enter the desired track / file number.
Using [SEARCH/NUMBER]
1
• Press [SEARCH/NUMBER] once for
the title search.
2 Enter the desired title or chapter
Using Time Search
2 Enter the desired time.
number.
e.g.) CD
• Displayed digit differs depending on
the contents. The same number of
digits that are stored on the disc must
be entered.
• Press cursor [0] or [1] to move the
digit that you wish to change.
• Press cursor [o] or [p] to change the
number.
• For the chapter search, press cursor
[1] to highlight the chapter number.
• Title number is displayed with 2-digit,
Chapter number is displayed with 3-digit.
• Press cursor [0] or [1] to move the
digit that you wish to change.
• Press cursor [o] or [p] to change the
number.
• Press cursor [0] or [1] to move the
digit that you wish to change.
• Press cursor [o] or [p] to change the
number.
3 Press [OK]. 3 Press [OK]. 3 Press [OK].
Press cursor [1] to
highlight the time.
e.g.) DVD
Note(s):
• The random playback will be cleared
when you select track search during
random playback (for CD only).
Using [ H , G ] (SKIP)
1
EN
Current Track
TR 1 TR 2 TR 3 TR 4
Using [ H , G ] (SKIP)
1
Current Chapter
CH 1 CH 2 CH 3 CH 4
–
–
12
Note(s):
• The random playback will be cleared
when you select time search during
random playback (for CD only).
Music
Title 0 0 : 0 2 : 3 402/44 Chapter 001/027
Music
2/92/8 Eng DD5.1CH 1/ 3 Spa
On-Screen Display
Track02
Track03
Track01
Music
CDDA 0 0 : 0 2 : 3 4TRK 0 1 / 1 2
Trac
k0
Trac
k0
0 0
0 2 3
4
1
2
You can check the information about the current disc by pressing [INFO].
1
Current Title Number / Total Titles
A:
Current Chapter Number / Total Chapters
B:
Elapsed Time of the Current Time
C:
2
Currently Selected Language / Total Languages
D:
Current Audio
E:
Currently Selected Subtitle / Total Subtitles
F:
Currently Selected Angle / Total Angles
G:
1
A
A
B
B
10/
C
Current Track Number / Total Tracks
A:
Current Repeat Mode
B:
Track Repeat :
Repeat All :
Elapsed Time of the Current Time
D
C:
2
C
TRACK
F
2
G
E
3
Insert a JPEG formatted disc, then the Folder / File list will
automatically appear on the TV Screen.
Thumbnail
(only while JPEG file list is displayed)
Date of the File
File Size
Resolution of the File
EN
Folder Name
[ C:/ ]
Photo
Reso :
800x600
118KB
Size :
None
Date :
File / Folder list
Folder_1
Folder_2
Folder_3
Photo_1.jpg
Photo_2.jpg
Photo_3.jpg
Photo_4.jpg
Photo_5.jpg
Press [MENU] to Display the Thumbnail Screen while an
available File is highlighted.
Thumbnail
Photo_1
Photo_2 Photo_3
Photo_4
Photo_5 Photo_6
File Name
Press [ H ] or [ G ] to Switch between Pages.
Press [BACK] to Go Back to the File List.
–
–
13
Repeat / Random Playback
REP OFF
REPEAT A-
REPEAT A-B
Music
RANDOM : On
Repeat Playback
Repeat function is available Only during
Playback.
1
Each time you press [REPEAT], Repeat
Function Changes as example below.
REP OFF
REP CHAPTER
REP TITLE
REP ALL
(Repeat Off)
(Current Chapter Repeat)
(Current Title Repeat)
(Entire Disc Repeat)
Repeat A-B Playback
Repeat Function is available Only during
Playback.
1
e.g.) DVD
Press [A-B REPEAT] at your desired
Starting Point. (A)
2
Press [A-B REPEAT] again at your
desired Ending point. (B)
• Point B should be in the Same Title or
Track as Point A.
Note(s):
• To Exit the Sequence, press [A-B
REPEAT] so that “A-B CANCEL”
appears.
Random Playback
This function Shuffles the Playing Tracks
in a Random mode instead of Playback
in a Sequential Track mode.
1
Random playback will start.
Note(s):
• During Random Playback, you
cannot go back to the Previous track.
Press [ G ] to Search Tracks or Files
Randomly.
REP OFF
REP 1
REP ALL
REP OFF
REP 1
REP DIR
REP ALL
(Repeat Off)
( Current Track Repeat)
(Entire Disc Repeat)
(Repeat Off)
( Current Track Repeat)
( Current Folder Repeat)
(Entire Disc Repeat)
EN
–
–
14
Special Settings
Subtitle Language
This unit allows you to Select a Subtitle
Language (if available) during DVD
Playback.
1
:OFF
Each time you press [SUBTITLE], Subtitle
Language changes as example below.
: Off (No Subtitle)
: 1 English (English Subtitle)
: 2 French (French Subtitle)
...
Note(s):
• If your language is not shown after
pressing [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow subtitle
language setting on the disc menu.
(Operation varies depending on the
disc, so refer to the manual along
with the disc.)
• When “✕This operation is not
available.” appears on the TV screen,
it means no subtitle is recorded on
the scene.
• Some discs will only allow you
to change the subtitle from the
disc menu. Refer to the manual
accompanying the discs for details.
Audio Language
This unit allows you to Select an Audio
Language (if Multiple Languages
are available on a Disc) during DVD
Playback.
1
: 1 English DD5.1CH
Each time you press [AUDIO], Audio
Language changes as example below.
: 1 English (English Audio)
: 2 French (French Audio)
: 3 Spanish (Spanish Audio)
...
Note(s):
• Some discs will only allow you to
change the Audio Setting from the
Disc Menu. Refer to the manual
accompanying the discs for details.
• If your Language is not shown after
pressing [AUDIO] several times, the
disc may not have that language.
However, some discs allow Audio
Language Setting on the Disc Menu.
(Operation varies depending on
the disc, so refer to the manual
accompanying the disc.)
Camera Angles
Some DVD’s may contain scenes which
have been shot simultaneously from
various angles. You can change the
Camera Angle if
TV screen.
icon appears on the
1
:1/3
Each time you press [ANGLE], camera
angle changes.
EN
–
–
15
System
Language
Audio
Video
Preference
O
On
TV Display
Voice Guide
DVD Settings
System
Language
Audio
Video
Preference
O
On
TV Display
Voice Guide
You can change the Settings on the unit. Setting items are displayed in gray when they are not available under the
conditions at the time.
1 Press [SETUP].
2 Select the desired item.
<Setup menu>
System menu Language menu Audio menu Video menu Preference menu
On
System
Language
Audio
Video
Preference
page 17
Voice Guide
TV Display
English
Menu
O
A
System
Language
Audio
Video
Preference
page 18
Audio
Subtitle
Disc Menu
B
Français
Español
System
Language
Audio
Video
Preference
page 19
Digital Audio
Night Mode
8
0
C
Set Brightness
System
Set Contrast
Language
Set Color
Set Tint
Audio
Set Sharpness
Video
Preference
page 20
12
0
D
System
Language
Audio
Video
Preference
page 21
Parental Control
Password
Default
1 [Kid Safe]
2 [G]
3 [PG]
4 [PG-13 ]
5 [PGR]
6 [R]
7 [NC-1 7 ]
8 [Adult]
E
EN
–
–
16
A
TV Display
Voice Guide
O
On
TV Display
Voice Guide
4:3 Normal
4:3 Crop
16:9 Widescreen
16:9 Squeeze
System Settings
You can change the Display functions. Follow steps 1 and 2 on page 16.
3 Select the desired item.
4
5 To Exit the Menu
Voice Guide: (Default: On)
Turns On/Off the Voice Guide function.
Select the Desired
<System menu>
Voice Guide
System
TV Display
Language
Audio
Video
Preference
Setting.
On
O
TV Display: (Default: 16:9 Widescreen)
Sets the aspect ratio of the playback image to fit your TV.
See the note on the right.
Note(s):
TV Display:
• Select “4:3 Crop” for a
full height picture with
both sides adjusted.
• Select “4:3 Normal”,
black bars may appear
on the top and bottom
of the TV screen.
• Select “16:9 Widescreen”
if a wide-screen TV is
connected to this unit.
• Select “16:9 Squeeze” to
display 4:3 aspect ratio
in the center of the 16:9
screen when playing
back 4:3 images.
Note:
One Touch Play
When the buttons below on the remote control are pressed then operations are performed on this unit, the TV will
automatically be turned on and switched to the appropriate video input.
Buttons for one touch play:
- [PLAY B], [SKIP H , G], [INFO], [SETUP]
- [TOP MENU], or [MENU] (when a disc is inserted in the unit)
One Touch Standby
When you press and hold [POWER] for 2 seconds, it turns off the TV first, then turns off this unit.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set on the TV and automatically sets the same language as the on-screen language
in “Menu” setting.
Voice Guide:
• In order to enable the Voice Guide function, the OSD language needs to be set to English. Voice Guide is not available in
French or Spanish.
• “Digital Audio” cannot be configured when Voice Guide is set to On, as it is fixed to PCM. In order to configuring the
setting, set Voice Guide to Off.
EN
–
–
17
B
Français
English
Audio
Subtitle
Menu
Disc Menu
Español
e
Audio
Subtitle
Menu
Disc Menu
e
French
English
Spanish
Audio
Subtitle
Menu
Disc Menu
e
French
English
Spanish
Audio
Subtitle
Menu
Disc Menu
e
French
English
Spanish
Language Settings
Follow steps 1 and 2 on page 16.
3 Select the desired item.
<Language menu>
System
Language
Audio
Video
Preference
Menu
Audio
Subtitle
Disc Menu
English
Français
Español
4
Menu: (Default: English)
Sets the Language for the On-screen Display.
Select the desired
language.
Audio: (Default: English) *1 *2
Sets the Audio Language.
Subtitle: (Default: English) *1 *2
Sets the Subtitle Language.
Disc Menu: (Default: English) *1
Sets the Language in DVD Menu.
5 To Exit the Menu
Note(s):
*1
• Language options are not available with some discs.
• Only the Languages supported by the disc can be selected.
*2
“Language” setting for “Audio” and “Subtitle” are not available with some discs. If Multiple Languages are available on
disc, then select [AUDIO] or [SUBTITLE] to select the desired Language. Refer to page 15 for detail.
• In order to enable the Voice Guide function, the OSD language needs to be set to English. Voice Guide is not available in
French or Spanish.
EN
–
–
18
C
e
Night Mode
Digital Audio
PCM
Bitstream
8
Night Mode
Digital Audio
0
Audio Settings
Choose the appropriate Audio Settings for your device. It only affects the Sound during DVD Playback. Follow steps 1 and 2 on
page 16.
3 Select the desired item.
4
5 To Exit the Menu
Digital Audio: (Default: PCM)
Set to “Bitstream” when the unit is connected to a Dolby
Digital decoder.
– Bitstream: outputs a Dolby Digital signals.
– PCM: convert the Dolby Digital into PCM (2 channel).
<Audio menu>
Digital Audio
System
Night Mode
Language
Audio
Video
Preference
8
0
Night Mode (Default: 0)
Select the Desired
Setting.
Adjusts for Clarity even when the Volume is Low, by
Compressing the Range of the lowest sound level and the
highest sound level.
Note(s):
Audio Out:
– Bitstream:
Connecting to a Dolby Digital decoder for Dolby Digital Audio output.
– PCM:
Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital Decoder.
Convert the Dolby Digital into LPCM (2 channel).
• This unit does not support DTS audio. This is not a malfunction.
You need to set this unit to “Bitstream” in the “Audio Out” Menu and also need to Connect to a TV or Amplifier that
supports DTS, then the audio will be output as DTS.
It is only available when connected via a Coaxial cable.
• “Digital Audio” cannot be configured when Voice Guide is set to On, as it is fixed to PCM. In order to configuring the
setting, set Voice Guide to Off.
EN
–
–
19
D
e
ce
12
0
Set Contrast
Set Brightness
Set Color
Set Sharpness
Set Tint
12
0
Set Contrast
Set Brightness
Set Color
Set Sharpness
Set Tint
12
0
Set Contrast
Set Brightness
Set Color
Set Sharpness
Set Tint
6
-6
Set Contrast
Set Brightness
Set Color
Set Sharpness
Set Tint
8
0
Set Contrast
Set Brightness
Set Color
Set Sharpness
Set Tint
e
Video Settings
You can change the Video functions. Follow steps 1 and 2 on page 16.
3 Select the desired item.
<Video menu>
System
Language
Audio
Video
Preference
Set Brightness
Set Contrast
Set Color
Set Tint
Set Sharpness
12
0
4
Set Brightness (Default: 6)
Adjusts the Brightness.
Set Contrast (Default: 6)
Adjusts the Contrast.
Set Color (Default: 0)
Adjusts the Color Saturation.
Set Tint (Default: 0)
Adjusts the Color Tone.
Adjust to the
Desired Level.
5 To Exit the Menu
Set Sharpness (Default: 0)
Adjusts the sharpness.
Note(s):
• The horizontal white bars indicate the default setting.
• The Settings will remain effective even if the unit is switched into the Standby mode.
• The effect of Picture Adjustment may differ depending on the connected TV.
EN
–
–
20
E
e
ce
2 [G]
1 [Kid Safe]
Password
Default
Parental Control
3 [PG]
5 [PGR]
4 [PG-13]
6 [R]
7 [NC-1 7 ]
8 [Adult]
Password
Default
Parental Control
_ -- -
Password
Default
Parental Control
_ -- -
Password
Default
Parental Control
Restore
Preference Settings
You can change the Display functions. Follow steps 1 and 2 on page 16.
3 Select the desired item.
<Preference menu>
System
Language
Audio
Video
Preference
Parental Control
Password
Default
1 [Kid Safe]
2 [G]
3 [PG]
4 [PG-1 3 ]
5 [PGR]
6 [R]
7 [NC-1 7 ]
8 [Adult]
4
Parental Control: (Default: 8[X-Adult])
Sets the rating level for the disc playback.
Rating settings allows you to set the rating levels of
your DVD. Playback will stop if the ratings exceed the
levels you set.
• The rating level can be changed when a password
has not been set yet for the first time use.
• If you have set a password already, “Movie Rating”
cannot be selected.
Select the desired
rating.
Password:
Sets the password for “Movie Rating” and “Default”
settings.
–For the first time use.
• This number will be used as the password.
Record in case you forget it.
Enter any 4-digit number(except for 4737).
• Press cursor [o] or [p] to change the number, then
press cursor [1].
• Press cursor
number
[0]
.
• When 4-digit numbers are entered, press [OK].
–A password has been set already. (
to erase if you input the incorrect
is displayed.)
5 To Exit the Menu
Note(s):
Password:
• If you forget the
password, enter “4737”
at step 4, then enter
your new password.
• Playback will stop if the
ratings exceed the levels
you set, it will require
you to enter a password
before the disc will play
back.
• This function is available
only when is
displayed.
Default:
• When you do not
wish to initialize, press
[SETUP] to exit the
menu at step 4.
EN
Enter your 4-digit password.
• Press cursor [o] or [p] to change the number, then
press cursor [1].
• When 4-digit numbers are entered, press [OK].
Default:
Reset to default setting.
• “Default” is not selected if you have set a password
already.
–
–
21
INFORMATION
Troubleshooting Guide
If the Unit does not perform properly when operated as instructed in this Owner’s Manual, refer to the following.
Problem Corrective action
No Power.
No Sound or Picture.
Distorted Picture.
Completely Distorted Picture or
Black / White Picture with DVD.
No Sound or Distorted Sound.
No DTS Audio is Output.
Bitstream is not output in Dolby Digital
audio.
Picture Freezes Momentarily during
Playback.
Disc Cannot be Played back.
No Return to Start-up Screen when
Disc is Removed.
The Unit does not Respond to
the Remote Control.
Buttons Do Not Work or the Unit Stops
Responding.
The Unit Does Not Respond to some
Operating Commands during Playback.
The Unit Cannot Read CD / DVD.
Angle Does Not Switch.
The Password for Rating Level
has been Forgotten.
– Check if the AC Power cord is properly connected.
– Unplug from the AC outlet, and wait for 5-10 seconds and then Plug it in again.
– Check if the TV is switched On.
– Check the Video Connection.
– Check the Audio / Video Cable connections to the TV.
(Refer to page 8.)
– Sometimes a small amount of Picture Distortion may appear.
This is Not a Malfunction.
– Connect the unit directly to the TV.
– Connect this unit directly to the TV.
– Make sure the Disc is Compatible with the unit.
– Adjust the Volume.
– Check that the Speakers are Connected correctly.
– This unit does Not support DTS Audio.
This is Not a Malfunction.
– You need to set this unit to “Bitstream” in “Audio Out” Menu and also need to connect to the TV
or Amplifier that supports DTS, then the Audio will be output as DTS. It is only available when
connected via a Coaxial cable.
– “Digital Audio” cannot be configured when Voice Guide is set to On. In order to set “Digital Audio” to
“Bitstream”, set Voice Guide to Off.
– Make sure that “Voice Guide” is set to “Off”.
“Digital Audio” is fixed to “PCM” when “Voice Guide” is set to “On”. In order to set “Digital Audio” to
“Bitstream”, set “Voice Guide” to “Off”.
– Check the Disc for Fingerprints / Dirty and Clean with a Soft cloth wiping from center to edge.
– Clean the Disc.
– Ensure the Disc is inserted in Correct position.
– Insert a Correct Type disc that Plays back on this unit.
– Check if the Disc is defective by trying another disc.
– Check if the Parental settings exceeds the levels you set in the “Movie Rating” setting. (for DVD only)
– Handle a Disc with special care so that it does not have Fingerprints, Scratches, or Dust on its surface.
– Turn Off the unit once and then restart.
– Aim the Remote Control Directly at the Sensor on the Front Panel.
– Reduce the Distance to the unit.
– Re-insert the Batteries with their Polarities (+ / – signs) as indicated.
– Replace the Batteries in the Remote Control.
– Press and Hold any buttons on the Remote Control toward a Digital Camera. The Remote Control is
working if you confirm a pulsating infrared light through the Digital Camera.
– Please attempt to Reset the unit by Unplugging the AC Power cord from the Wall outlet and then
Plug it in again after 5-10 seconds.
– Operations may Not be permitted by the Disc. Refer to the instructions for the disc.
– Use a commonly available Cleaning CD / DVD disc to Clean the Lens before sending the Unit for
Repair.
– The Angle cannot be switched for a DVD which does not contain Multiple Angles. In some cases
Multiple Angles are only recorded for specific Scenes.
– Enter the Default Password “4737”, then your Forgotten Password will be Cleared. Then the Rating
Level plus Password will have to be set again.
• Some Functions are not available in Specific modes, but this is Not a Malfunction. Read the description in this Owner’s
Manual for more details on Correct Operation’s.
• Not all Functions are available for all Commercial discs.
Specifications
Output Signal Format:
NTSC color
Power Source:
120 V AC + / - 10%, 60 Hz + / - 0.5%
Power Consumption:
7 W (standby : 0.9 W)
EN
Operating Temperature:
41°F (5 °C) to 104 °F (40 °C)
Dimensions:
W : 9.9 inches (250 mm)
H : 2.0 inches (50.2 mm)
D : 7.4 inches (187.7 mm)
Weight:
Approx 1.95 lbs. (0.88 kg)
–
–
22
• Designs and Specifications are subject
to change without notice.
• If there is a Discrepancy between
Languages, the default Language will
be English.
LIMITED WARRANTY ONE (1 ) YEAR
WARR ANTY COVER AGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or
the person receiving the product as a gift against defects in
materials and workmanship as based on the date of original
purchase (“Warranty Period”) from an Authorized Dealer.
The original sales receipt showing the product name and the
purchase date from an authorized retailer is considered such
proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement
parts, or (2) exchange the product with a product that is new or
which has been manufactured from new, or serviceable used
parts and is at lea st functionally equivalent or most comparable to
the original product in current inventory, or (3) refund the original
purchase price of the product.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product ’s warrant y, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and
the replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identif ied by the trademark,
trade name, or logo af fixed to it. This Limited Warranty does
not apply to any hardware product or any software, even if
packaged or sold with the produc t, as manufacturers, suppliers,
or publishers may provide a separate warranty for their own
products packaged with the bundled product.
The company is not liable for any dama ge to or loss of any
programs,
data, or other information stored on any media contained
within the product, or other additional product or part
not covered by this warranty. Recovery or reinstallation of
programs,
data or other information is not covered under this Limited
Warranty.
This warranty does not apply (a) to damage caused by
accident, abuse, misuse, neglec t, misapplication, or nonsupplied product, (b) to damage caused by service performed
by anyone other than company approved Authorized Service
Location, (c) to a produc t or a par t that has been modified
without writ ten company permission, or (d) if any serial number
has been removed or defaced, or (e) product, accessories or
consumables sold “AS IS” without warranty of any kind by
including refurbished produc t sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna/signal source systems
outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images
or screen markings resulting from viewing fixed stationary
content for extended periods, product cosmetic appearance
items due to normal wear and tear, unauthorized repair or
other cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost sof tware.
• Damage from mishandled shipments or transit accidents
when returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which it
was designed, manufac tured, approved and/or author ized, or
repair of produc ts damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE...
Contact Customer Care Center at:
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANT Y IS THE EXCLUSIVE REMEDY FOR THE CONSUMER,
WITH THE ISSUING COMPANY NOT LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BRE ACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUC T.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warrant y lasts, so the above limitations or exclusions may not apply
to you.
1-866-515-1124
P&F USA, Inc.
PO Box 2248 Alpharetta, GA 30023-2248 U.S.A.
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura.
Huixquilucan, Edo. de México. C.P. 52787
This product has been manufactured by and is sold
under the responsibility of P&F USA, Inc., and P&F
USA, Inc. is the warrantor in relation to this product.
The Philips trademark and the Philips Shield Emblem
are registered trademarks of Koninklijke Philips N.V.
used under license.
E6T20UL
Loading...