Philips DVDR3588H-93 User Manual
Quick Start Guide
¿ìËÙ²Ù×÷Ö¸ÄÏ
DVDR3588H
1 Hard Disk/DVD Recorder
2 RF coaxial
cable
3 Video/Audio cable
(yellow/red/white)
c/2d
4
Remote control and
two AAA batteries
CABLE
SATELLITE
ANTENNA
Press STANDBY-ON on the recorder.
3
Turn on the TV and other connected devices (e.g. Cable
Box, Satellite Receiver).
Set it to the correct video-in channel. You should see the
3b
blue DVD background screen.
b
e
Connect the existing Antenna/Cable TV signal (or from the Cable
Box/Satellite Receiver {RF OUT or TO TV} to the ANTENNA IN
jack on the recorder.
Use the supplied RF coaxial cable to connect the ANTENNA OUT
b
on the recorder to the ANTENNA IN jack on your TV (VHF/UHF
RF IN).
Use the supplied audio/video cable (yellow plug) to connect the
c
VIDEO (CVBS) OUTPUT jack on the recorder to the VIDEO IN
jack on your TV.
Use the supplied audio/video cable (red/white plugs) to connect
d
the AUDIO OUTPUT jacks on the recorder to the AUDIO IN jacks
on your TV.
Press SETUP and press keys for moving preview.
3c
Press key to select the options needed and press OK.
Move cursor to "SETUP MENU - GENERAL" option, then
3d
press key. Press keys to highlight "Auto Scan" option
and press OK to search for stations.
e
Connect the power cable from the recorder to an AC power outlet.
Helpful hint:
please see page 16-23 of user manual for more connections.
Move cursor to "SETUP MENU - DATE/TIME" option, then
3e
press key. Press keys to select "Date (dd/mm/yyyy)"
option. Press key to change the setting and press OK.
Press OPEN/CLOSE to open the disc tray, load a recordable
4
DVD+R/+RW with the label facing up.
To select external program source. Press SOURCE repeatedly
4b
to select the source to record from.
Input Source: CAM 1, R CVBS, R Y/C, R YUV, CHXXX or press
DV/USB twice to select input source of DV.
Playback from disc
Supported disc formats:
Press OPEN/CLOSE to open the disc tray, load a recordable
5
DVD+R/+RW with the label facing up.
Playback will begin automatically, otherwise press OK or
5b
PLAY/PAUSE to start playback. If a User Interface appears,
keep pressing keys to preview disc menu and
highlight the preferred option, press OK or PLAY/PAUSE
to play the selected file.
ALL
6
To select recording media. Press DVD REC repeatedly
4c
to select "Rec to: Optical disc" or "Rec to: Hard disc".
Press ADD/CLEAR to toggle between the different modes
of record quality.
Quality
HQ(High quality)
SP(DVD quality)
SP+( )DVD quality
LP( )VHS quality
EP(VHS quality)
SLP( )VHS quality
Press DVD, then press SOURCE or DVD/USB to select matching
4d
input source, and press REC to record to DVD.
Maximum recording time
for a disc (4.7GB, DVD)
Maximum recording time
for a disc (160GB, HDD)
To stop playback press STOP key.
5c
Switch to TV program
Press TUNER, then press CH+ and CH- keys to select a TV channel.
5d
Press HDD to access to title recordings in hard disc.
Press DVD to access to title recordings in disc.
Acquiring picture
Check video input jacks on TV, it can be FRONT A/V IN
or VIDEO jacks on the back.
Toggle among different modes with remote control.
Or, select channels by TV's remote control, then press CH+ and
CH- keys repeatedly until picture display.
Please refer to user manual for more information
To pause the recording, press PLAY/PAUSE. Press REC to resume
4e
recording and press STOP key to stop recording.
Need help please read supplied manual or browse our website at www.philips.com/support
Acquiring sound
Connect Audio L/R (red/while) jacks on back of DVD recorder to
AUDIO INPUT jacks of TV, stereo system or receiver. Switched on
connected systems and choose matching channel.
Loading...