Philips DVDR3545V-37 User Manual
3
Enjoy
Digital Video Disc Recorder &
Video Cassette Recorder with Digital Tuner
DVDR3545V/37
Start Recording
For DVD recording, press DVD rst.
For VCR recording, press VCR rst.
❶ Insert a recordable disc (make sure the disc is
compatible with this unit) or a cassette tape.
❷ Press REC MODE to select a recording
mode.
❸ Press SOURCE repeatedly to select the
appropriate external input channel to record
from. (e.g. TUNER, E1, E2 or E3(DV-IN))
To record a TV programme:
Press DTV/TV to select analog TV or digital
TV, then use CH / or the Number
buttons to select a desired channel to record.
❹ Press REC to start recording.
Press REC again to make recording for 30
minutes. Press REC repeatedly to extend the
recording time by 30 minutes for each press.
❺ Press STOP to stop the recording.
You will need to finalize DVD+R, DVD-RW or
DVD-R to play them back on other DVD
players (refer to page 56 in the User Manual).
Types of Media Used on This
Recorder
* DVD-RW/-R recorded in VR mode or non
compatible recording format are not playable.
* DVD-RW recorded in the mode other than +VR is
not recordable on this unit unless you erase all
contents in the disc (refer to page 87 in the User
Manual).
* DVD-R recorded in the mode other than +VR is
not recordable on this unit.
Type Playback Record
DVD+RW
DVD+R
DVD-RW
DVD-R
Quick Start Guide
1
2
3
What’s in the box?
Connections
Basic Setup
Enjoy
Start Playback
For DVD playback, press DVD rst.
For VCR playback, press VCR rst.
❶ Insert a playable disc or a prerecorded
cassette tape.
❷ Press PLAY to start playback.
❸ Press STOP to stop playback.
To pause playback:
Press PAUSE .
To resume playback:
Press PLAY .
Need help?
User Manual
See the user manual that came with your Philips recorder.
Online
Go to www.philips.com/usasupport.
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
VHS
DVD+R
Double
Layer
DVD-video
CD-DA
(audio CD)
video CD
2007 © Philips Consumer Electronics Company
Marietta, GA 30006 0026
All rights reserved.
Printed in China
12 NC 8239 300 56651
E9H90UD
1VMN23627
STANDBY-ON
DVD RECORDER / VCR DVDR 3545V
Remote Control
with Batteries
(AAAx2)
CHANNEL
OPEN/CLOSE
VCR DVD
SOURCE
4 HEAD HI-FI STEREO
ONE TOUCH RECORDING • LONG PLAY
REW F. FWD PLAY PLAYRECSTOP/EJECT STOP
Digital Video Disc Recorder & Video Cassette Recorder with Digital Tuner
RCA Audio / Video Cables
RF Coaxial Cable
DVD RECORDER
REC
User Manual
User Manual
SV VIDEO L-AUDIO-R DV
Quick Start Guide
E9H90UD_QSG_EN.indd 1E9H90UD_QSG_EN.indd 1 3/23/2007 4:12:45 PM3/23/2007 4:12:45 PM
1
IN
L
Y
P
B
/CB
PR
/CR
RLR
OUT
IN
S-V ID EO I N - -- AU D IO --- OU T
IN --- VIDEO --- OUT
ONENT
O OUT
DVD/VCR
ANTENNA
AUDIO IN
RL
VIDEO IN
ANT. IN
ANT. IN
IN
L
Y
P
B
/CB
PR
/CR
RLR
OUT
IN
S-VIDEO I N --- AUDIO --- OUT
IN --- V I DE O --- OU T
ONENT
O OUT
DVD/VCR
ANTENNA
AUDIO IN
VIDEO IN
LR
ANT. INANT. OUT
43
RF OUTANT. IN
ANT. IN
AUDIO IN
RL
VIDEO IN
AUDIO OUT
LR
VIDEO
OUT
S-VIDEO
OUT
IN
IN
L
Y
P
B
/CB
PR
/CR
RLR
OUT
IN
S-VIDEO IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
DVD/VCR
ANTENNA
Connections
Start with the “Basic Connection”.
Basic Setup
2
Basic Connection
Before Connecting
A
❶ Disconnect the power cords of the devices from
the AC outlet.
❷ Disconnect RF coaxial cable from antenna input
jack of your TV.
Connecting
B
Make the connections as illustrated below.
rear of your TV
RF Modulator Connection
If your TV has antenna in jack only, it is still
possible to connect this unit to your TV by using a
commercially available stereo audio / video RF
modulator. In this case, follow the instructions below.
Before Connecting
A
❶ Disconnect the power cords of the devices from
the AC outlet.
❷ Disconnect RF coaxial cable from antenna input
jack of your TV.
Connecting
B
Make the connections as illustrated below.
rear
of your
TV
Connection to a Cable /
Satellite Box
If you have a Cable / Satellite Box, follow the
instructions below.
Before Connecting
A
❶ Disconnect the power cords of the devices from
the AC outlet.
❷ Disconnect RF coaxial cable from antenna input
jack of your TV.
Connecting
B
Make the connections as illustrated below.
rear of your TV
Finding the Viewing Channel
A
❶ Press STANDBY-ON to turn on the unit.
❷ Turn on your TV.
If connected to your VCR, make sure it is
switched off or in standby mode before
proceeding.
❸ Press “2” on the TV’s remote control, then press
channel down button repeatedly until you see the
“Initial Setup” menu. This is the correct viewing
channel (external input channel) for the recorder.
OSD Language
English
Français
Español
Refer to your TV’s user manual for
*
details.
Initial Setting
B
❶
Use K / L to select your desired language, then
press OK .
L
RLR
ANTENNA
OUT
IN
1
from
antenna
or cable TV
RF coaxial
cable
From
antenna
or cable
OUT
TV
L
IN
1
ANTENNA
RLR
RF
coaxial
cable
2
5
rear of this unit
3
RCA audio
cable
rear of your RF
modulator
HDMI OUT
AUDIO IN VIDEO IN
LR
RCA video
cable
43
4
RF coaxial cable
ANT. INANT. OUT
DVD
AUDIO
OUT
S-VIDEO
L
OUT IN
R
COMPONENT
VIDEO OUT
S-VIDEO IN --- AUDIO --- OUT
Y
P
B
/CB
PR
/CR
DVD/VCR
IN --- VIDE O --- OUT
DIGITAL
AUDIO OUT
COAXIAL
❶ Connect the RF coaxial cable from the TV
antenna or cable TV to the ANTENNA IN jack of
this unit.
❷ Use RF coaxial cable to connect ANTENNA
OUT jack of this unit to the antenna input jack of
your RF modulator.
❸ Use RF coaxial cable to connect antenna output
jack of your RF modulator to the antenna input
jack of your TV.
❹ Use RCA audio / video cables to connect the
AUDIO / VIDEO OUT jacks of this unit to the
audio / video input jacks of your RF modulator.
❺ Plug in the power cords of the devices to the AC
outlet.
* RF modulator is not supplied with this unit. You
need to purchase it at your local store.
5
RCA audio cable
DIGITAL
AUDIO
AUDIO OUT
OUT
COAXIAL
DVD
S-VIDEO
L
OUT IN
R
COMPONENT
VIDEO OUT
S-VIDEO IN --- AUDIO --- OUT
Y
P
B
/CB
PR
/CR
RCA video cable
OUT
DVD/VCR
L
IN
ANTENNA
RLR
IN --- VIDEO --- OUT
3
rear of this unit
RF coaxial
cable
HDMI OUT
6
4
2
RCA audio
cable
RCA video
1
from cable TV / satellite
RF OUTANT. IN
cable / satellite
box
LR
AUDIO OUT
cable
VIDEO
S-VIDEO
OUT
OUT
RF coaxial cable
❶ Connect the RF coaxial cable from the cable TV /
satellite to the antenna input jack of your cable /
satellite box.
❷ Use RF coaxial cable to connect the RF output
jack of your cable / satellite box to ANTENNA
IN jack of this unit.
❸ Use RF coaxial cable to connect ANTENNA
OUT jack of this unit to the antenna input jack of
your TV.
❹ Use RCA audio / video cables to connect the
audio / video output jacks of your cable / satellite
box to the AUDIO / VIDEO IN jacks of this unit.
❺ Use RCA audio / video cables to connect the
AUDIO / VIDEO OUT jacks of this unit to the
audio / video input jacks of your TV.
❻ Plug in the power cords of the devices to the AC
outlet.
Refer to the user manual for other
*
connection methods.
❷
Use K / L to select the type of broadcasting
signal, then press OK .
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and digital
TV are automatically scanned and memorized.
Only the receivable channels in the area will be
memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
❸
Press OK to activate “Clock Setting”.
Clock Setting
- - - / - - / - - - - ( - - - )
❹
Use { / B to select an item to set, and use
K / L to select the contents to suit your
preference, then press OK when you finish
setting all the contents.
Your Philips recorder is now ready for use!
- - : - - - -
RF coaxial
2
cable
DVD
AUDIO
OUT
S-VIDEO
L
OUT IN
R
COMPONENT
VIDEO OUT
S-VIDEO IN --- AU DI O --- OUT
Y
P
B
/CB
PR
/CR
DVD/VCR
IN --- VIDEO --- OUT
DIGITAL
AUDIO OUT
COAXIAL
rear of this unit
HDMI OUT
RCA video
cable
3
RCA audio
cable
4
to the
AC outlet
❶ Connect the RF coaxial cable from the TV
antenna or cable TV to the ANTENNA IN jack of
this unit.
❷ Use RF coaxial cable to connect ANTENNA
OUT jack of this unit to the antenna input jack of
your TV.
AND
❸ Use RCA audio / video cables to connect the
AUDIO / VIDEO OUT jacks of this unit to the
audio / video input jacks of your TV.
❹ Plug in the power cords of the devices to the AC
outlet.
E9H90UD_QSG_EN.indd 2E9H90UD_QSG_EN.indd 2 3/23/2007 4:13:01 PM3/23/2007 4:13:01 PM
Loading...