Philips DS3120 User Manual

www.philips.com/welcome

DS3120

Quick start guide

ON/OFF

OFF

iPod touch (1G,2G,3G,4G)

iPhone, iPhone 3G, iPhone 3GS iPhone(4,4S)

iPod nano 1G	iPod nano 2G	iPod nano 3G
iPod nano 4G	iPod nano 5G	iPod nano 6G
iPod classic

DS3120_05_QSG_V1.0

Follow the on-screen instructions to complete the installation.

You can only charge your iPod/iPhone when the docking speaker is powered by AC supply.

OFF

Pressto turn the docking speaker off, and then you can synchronize the iPod/iPhone with PC through an USB cable. Note:Due to different materials and product techniques, some USB cables may not work with this device.

MP3 LINK

To get the detailed instructions for use, visit www.philips.com/support.

English

*1 If the docking speaker is powered by batteries, the volume is lower than that by AC supply. *2 For software upgrade of the docking speaker, refer to the online user manual.

	Speci cations
Rated Output Power	2 X 5 W RMS
Power supply	Model:AS190-090-AI190 (Philips);
- AC Power	Input: 100-240V ~, 50/60Hz, 0.7A;
- Battery	Output: 9V 1.9 A;
- Battery	Li-ion battery
Operation Power Consumption	<10 W
Standby Power Consumption	<0.5 W
Max. load for iPod/iPhone	5V 1 A
	5V 1 A
Dimensions
- Main Unit (W x H x D)	224 x 162 x 120 mm
Weight
- Main Unit	1.1 kg
- With Packing	1.6 kg

1Important

•Read these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli ers) that produce heat.

•Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•Only use attachments/accessories speci ed by the manufacturer.

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

•Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like.

•Apparatus shall not be exposed to dripping or splashing.

•Do not place any sources of danger on the apparatus (e.g. liquid lled objects, lighted candles).

•The USB socket is for data transmission only.

•Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Warning

•Never remove the casing of this apparatus.

•Never place this apparatus on other electrical equipment.

•Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.

2Notice

Any changes or modi cations made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.

This product complies with the radio interference requirements of the European Community.

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information

All unnecessary packaging has been omitted.We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)

Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect speci cally to iPod or iPhone respectively, and has been certi ed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

Note

• The type plate is located on the bottom of the apparatus.

Always bring your product to a professional to remove the built-in battery.