Page 1
Register your product and get support at
www.philips.com/welcome
DCM292
EN User manual
Page 2
Contents
1 Important 4
Safety 4
Notice 5
2 Your Micro Hi-Fi System 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 9
3 Get started 10
Placement 10
Prepare the remote control 10
Connect power 11
Auto install radio stations 11
Set clock 11
Turn on 12
4 Play 12
Play a disc 12
Play from USB 12
Play iPod/iPhone 13
7 Other features 16
Set the alarm timer 16
Set the sleep timer 16
Play from an external device 17
8 Product information 17
Specications 17
USB playability information 18
Supported MP3 disc formats 18
Maintenance 18
9 Troubleshooting 20
English
5 Listen to radio 14
Tune to a radio station 14
Program radio stations automatically 14
Program radio stations manually 14
Select a preset radio station 14
6 Play options 15
Pause/resume play 15
Skip to a track 15
Search within a track 15
Select repeat/shufe play options 15
Program tracks 15
Display time 15
Adjust volume level 15
Mute sound 15
Select a preset sound effect 16
Enhance bass 16
EN
3
Page 3
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
orotherapparatus(includingampliers)
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
speciedbythemanufacturer.
k Use only with the cart, stand, tripod,
bracket,ortablespeciedbythe
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Referallservicingtoqualiedservice
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and - •
as marked on the unit.
Do not mix batteries (old and new •
or carbon and alkaline, etc.).
Remove batteries when the unit is •
not used for a long time.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
theapparatus(e.g.liquidlledobjects,
lighted candles).
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
Never remove the casing of this apparatus. •
Never lubricate any par t of this apparatus. •
Never place this apparatus on other electrical •
equipment.
Keep this apparatus away from direct sunlight, •
naked ames or heat.
Never look into the laser beam inside this •
apparatus.
Ensure that you always have easy access to the •
power cord, plug or adaptor to disconnect this
appar atus from the power.
4
EN
Page 4
Hearing safety
Notice
Listen at a moderate volume.
Using headphones at a high volume can •
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
Sound can be deceiving. Over time your •
hearing ‘comfor t level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting. •
Slowly increase the sound until you can •
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even •
at normally ‘safe’ levels, can also cause
hearing loss.
Be sure to use your equipment •
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for •
reasonable periods of time.
Be careful not to adjust the volume as •
your hearing adapts.
Do not turn up the volume so high that •
you can’t hear what’s around you.
You should use caution or temporarily •
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
skateboarding, etc.; it may create a trafc
hazard and is illegal in many areas
Any changes or modications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
This product complies with the radio
inter ference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
English
EN
5
Page 5
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC , which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
2 Your Micro Hi-
Fi System
Congratulations on your purchase, and
welcome to Philips! To fully benet from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from discs,
USB devices, iPod players, iPhone and other
external devices, or listen to radio stations.
The unit offers Digital Sound Control (DSC) and
Dynamic Bass Boost (DBB) to enrich sound.
The unit supports the following media formats:
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:
What’s in the box
Check and identify the contents of your
package:
Main unit•
Remote control•
Power adaptor•
1 x MP3 link cable•
Mounting kit (2 dowels and 2 screws)•
Quick star t guide•
User manual •
Wal• l mounting instructions
6
EN
Page 6
Overview of the main unit
a cb d e
a
Turn on the unit, or switch to •
standby mode, or switch to Eco
Power standby.
b Dock for iPod/iPhone
c
Open/close the disc compartment.•
d Disc compartment
e Display panel
English
Show current status.•
7
EN
Page 7
m l k
f h ig j
f SOURCE
Select a source: CD, FM tuner, USB, •
iPod, or MP3 link.
g /
Skip to the previous/next track.•
Search within a track.•
Tune to a radio station.•
Adjust hour/minute digits. •
Select 12 hour or 24 hour format.•
h
Star t or pause play.•
i
Stop play or erase a program.•
j VOLUME + / -
Adjust volume.•
k
Jack for the headphone.•
l
Jack for a USB mass storage device. •
m MP3 LINK
Audio input jack (3.5mm) for an •
external audio device.
8
EN
Page 8
Overview of the remote
PRESET/ALBUM
DISPLAY
RDS
VOL
SLEEP/
TIMER
REPEAT/
SHUFFLE
DSC DBB
PROG/
CLOCK SET
a
b
c
e
f
g
q
p
n
m
o
d
h
i
j
k
l
OPEN/CLOSE
CD
MP3 LINK
USB
TUNER
iPhone
MENU
iPod
control
a
Turn on the unit, or switch to •
standby mode, or switch to Eco
Power standby.
b OPEN/CLOSE
Open or close the disc •
compartment.
c CD
Select disc source.•
d / / /
Navigate in the iPod menu.•
Skip to the previous/next album.•
/
Skip to the previous/next track.•
Search within a track. •
Tune to a radio station.•
Adjust hour/minute digits.•
Select 12 hour or 24 hour format.•
Star t or pause play.•
e USB/MP3 LINK
Select USB device source.•
Select external audio device source.•
f RDS/DISPLAY (RDS not available)
Select display information during play.•
g
Mute or restore volume.•
h VOL +/-
Adjust volume.•
i Numeric keypad
Select a track from a disc directly.•
Select a preset radio station. •
j PROG/CLOCK SET
Program tracks.•
Program radio stations.•
Scan for radio stations automatically. •
Set the clock.•
k SLEEP/TIMER
Set the sleep timer.•
Set the alarm timer.•
l DSC
Select a preset sound setting.•
English
EN
9
Page 9
m DBB
Turn on or off dynamic bass •
enhancement.
n REPEAT/SHUFFLE
Play a track or all tracks repeatedly.•
Play tracks randomly.•
o /MENU
Stop play or erase a program.•
Access the iPod menu.•
p iPod/iPhone
Select iPod/iPhone source.•
q TUNER
Select tuner source.•
3 Get started
Caution
Use of controls or adjus tments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Placement
You can place the unit on a at surface or
mount the unit on a wall.
Mount on a wall
To wall mount the unit, see the included
separate sheet of wall mounting instructions.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from •
heat, sunshine or re. Never discard batteries
in re.
To insert the remote control battery:
1 Open the battery compartment.
2 Inser t 2 A AA batteries (not supplied)
with correct polarity (+/-) as indicated.
3 Close the battery compar tment.
10
EN
Page 10
Auto install radio stations
Note
If you are not going to use the remote control •
for a long time, remove the bat teries.
Do not use old and new or dif ferent types of •
batteries in combination.
Batteries contain chemical substances, so they •
should be disposed of properly.
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock ! When you unplug the •
AC adaptor, always pull the plug from the
socket . Never pull the cord.
Before connecting the AC adaptor, ensure you •
have completed all other connections.
1 Connect the power adaptor to:
the • DC IN jack on the main unit.
the wall outlet.•
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
[ » AUTO INSTALL PRESS -- PLAY
KEY](auto install press -- play key) is
displayed.
2 Press on the main unit to start
installation.
The unit automatically stores radio »
stations with sufcient signal strength.
When all the available radio stations »
are stored, the rst preset radio station
is broadcast automatically.
Set clock
Note
You can set the clock in the standby mode •
only.
1 Press and hold PROG/CLOCK SET to
enter the clock setting mode.
[ » SET CLOCK](set clock) scrolls on the
screen.
2 Press / repeatedly to select 12 hour
or 24 hour format.
3 Press PROG/CLOCK SET to conrm.
The hour digits are displayed and begin »
to blink.
4 Press / to set the hour.
5 Press PROG/CLOCK SET to conrm.
The minute digits are displayed and »
begin to blink.
6 Press / to set the minute.
7 Press PROG/CLOCK SET to conrm the
clock setting.
English
EN
11
Page 11
Turn on
1 Press .
The unit switches to the last selected »
source.
Switch to standby
1 Press again to switch the unit to
standby mode.
The clock (if set) appears on the »
display panel.
To switch the unit to Eco Power Standby
mode:
1 Press and hold for more than 2
seconds.
The backlight on the display panel »
turns off.
4 Play
Play a disc
1 Press CD to select the disc source.
2 Press to open the disc compartment.
3 Inser t a disc with the printed side facing
outward.
4 Press to close the disc compartment.
Play starts automatically. If not, press »
.
Play from USB
Note
Tip
The unit switches to Eco Power Standby mode •
after 15 minutes in standby mode.
To switch between standby mode and Eco
Standby Mode:
1 Press and hold for more than 2
seconds.
Ensure that the USB device contains playable •
audio content.
1 Inser t the USB device into the socket.
2 Press USB to select the USB source.
Play starts automatically. If not, press »
.
To select a folder, press • / .
To select an audio le, press • / .
12
EN
Page 12
Play iPod/iPhone
You can enjoy audio from iPod/iPhone through
this Micro Hi-Fi system.
Compatible iPod/iPhone
Apple iPod and iPhone models with a 30-pin
dock connector:
iPod classic, iPod touch, iPod nano, iPod •
5th generation (video), iPod with color
display, iPod mini
iPhone, iPhone 3G, iPhone 3GS•
Play an iPod/iPhone player
Note
When an iPod/iPhone player is loaded, the unit •
switches to iPod source automatically.
1 Push to open the dock compartment.
English
3 Press iPod to select iPod source.
The connected iPod/iPhone plays »
automatically.
To pause/resume play, press • .
To skip to a track, press • / .
To search during play, press and •
hold / , then release to resume
normal play.
Charge the iPod/iPhone
When the unit is connected to power, the
docked iPod/iPhone begins to charge.
2 Place the iPod/iPhone player in the dock.
EN
13
Page 13
5 Listen to radio
Tune to a radio station
1 Press TUNER to select FM.
2 Press and hold / for more than 2
seconds.
[ » SEARCH] (search) is displayed.
The radio tunes to a station with »
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/ repeatedly until you nd optimal
reception.
Program radio stations automatically
You can program a maximum of 20 preset
radio stations (FM).
1 In the tuner mode, press and hold
PROG/CLOCK SET for more than 2
seconds to activate automatic program
mode.
[ » AUTO] (auto) is displayed.
All available stations are programmed »
in the order of waveband reception
strength.
The rst programmed radio station is »
broadcast automatically.
[ » PROG] (program) is displayed.
3 Press / to allocate a number to this
radio station, then press PROG/CLOCK
SET to conrm.
4 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1 In tuner mode, press / to select a
preset number.
You can also press the numeric buttons •
to select a preset number directly.
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
For optimal reception, fully ex tend and adjust •
the position of the antenna.
Program radio stations manually
You can program a maximum of 20 preset
radio stations (FM).
1 Tune to a radio station.
2 Press PROG/CLOCK SET to activate
program mode.
14
EN
Page 14
6 Play options
Program tracks
Pause/resume play
1 During play, press to pause/resume
play.
Skip to a track
For CD:
1 Press / to select another track.
To select a track directly, you can •
also press a key on the numerical
keypad.
2 Press to select an album or a folder.
3 Press / to select a track or a le.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Selectrepeat/shufeplay
options
1 During play, press REPEAT/SHUFFLE
repeatedly to select a repeat option or
the shufe play mode.
[• ]: the current track is played
repeatedly.
[• ]: all tracks are played
repeatedly.
[• ]: all tracks in this album are
played repeatedly.
[• ]: all tracks are played randomly.
2 To resume normal play, press
REPEAT/SHUFFLE repeatedly until no
option is displayed.
Note
You can program track s only when the play •
stops.
You can program a maximum of 40 tracks.
1 Press PROG/CLOCK SET to activate the
program mode.
[ » PROG] (program) is displayed.
2 For MP3/WMA tracks, press / to
select an album.
3 Press / to select a track, then press
PROG/CLOCK SET to conrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
During play, [ » PROG] (program) is
displayed.
To erase the program, in the stop •
position, press .
Display time
1 Press DISPL AY to display time.
Tip
In Eco Standby mode, time is displayed for 90 •
seconds.
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1 During play, press to mute/unmute
sound.
English
EN
15
Page 15
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
[• POP] (pop)
[• JAZZ] (jazz)
[• ROCK] (rock)
[• CLASSIC] (classic)
[• FL AT ] (at - all equalizers off )
7 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
disc/radio/USB/iPod is activated to play at a
preset time.
Note
Enhance bass
1 During play, press DBB to turn on or off
dynamic bass enhancement.
If DBB is activated, [DBB] is displayed. »
Ensure that you have set the clock correctly. •
1 Press to switch to standby mode.
2 Press and hold SLEEP/TIMER for more
than two seconds.
A prompt to select the source is »
displayed.
3 Press CD, TUNER, USB or iPod to select
a source.
4 Press SLEEP/TIMER to conrm.
The clock digits are displayed. »
The hour digits begin to blink. »
5 Press / to set the hour.
6 Press SLEEP/TIMER to conrm.
The minute digits begin to blink. »
7 Press / to set the minute.
The timer is set and activated. »
» is displayed.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
When sleep timer is activated, » is
displayed.
2 Press SLEEP/TIMER repeatedly until
[OFF] (off) is displayed.
16
EN
Page 16
When sleep timer is deactivated, »
disappears on the display.
8 Product
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press USB/MP3 LINK to select the MP3
link source.
2 Connect the supplied MP3 link cable to:
the • MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external •
device.
3 Star t to play the device (see the device
user manual).
information
Note
Product information is subject to change •
without pr ior notice.
Specications
Amplier
Total output power 2 x 10 W RMS
Frequency
response
Signal to noise ratio > 60 dB
MP3 link input 0.5 V RMS 20 k
Disc
Laser type Semiconductor
Disc diameter 12 cm /8 cm
Support disc CD-DA, CD-R, CD-
Audio DAC 24 Bits / 44.1 kHz
Total harmonic
distortion
Frequency
response
Signal to noise ratio > 55 dBA
80 Hz - 16 kHz, ± 3 dB
RW, MP3-CD, WMACD
< 1.5%
60 Hz -16 kHz (44.1
kHz)
English
Tuner
Tuning range FM: 87.5 - 108 MHz
Tuning grid 50 KHz
Number of presets 20
EN
17
Page 17
Speakers
Speaker impedance 2 x 10 W, 4
General information
AC power 100 - 240V~,
50/60Hz
Model: AS300-120CM250
Operation Power
Consumption
Standby Power
Consumption
Eco Power Standby
Power Consumption
USB Direct Version 2.0/1.1
Dimensions
- Main Unit
(W x H x D) 565 x 245 x 104 mm
Weight
- Main Unit 2.7 kg
15 W
< 2 W
< 1 W
USB playability information
Compatible USB devices:
USB ash memory (USB 2.0 or USB 1.1)•
USB ash players (USB 2.0 or USB 1.1)•
memor y cards (requires an additional •
card reader to work with this unit)
Supported formats:
USB or memory le format FAT12, •
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and •
variable bit rate
WMA v9 or earlier•
Director y nesting up to a maximum of 8 •
levels
Number of albums/ folders: maximum 99•
Number of tracks/titles: maximum 999•
ID3 tag v2.0 to v2.3•
File name in Unicode UTF8 (maximum •
length: 128 bytes)
Unsupported formats:
Empty albums: an empty album is an •
album that does not contain MP3/ WMA
les, and is not be shown in the display.
Unsupported le formats are skipped. For •
example, Word documents (.doc) or MP3
les with extension .dlf are ignored and
not played.
AAC, WAV, PCM audio les•
DRM protected WMA les (.wav, .m4a, •
.m4p, .mp4, .aac)
WMA les in Lossless format and bit rate •
higher than 320 kbps
Supported MP3 disc formats
ISO9660, Joliet•
Maximum title number: 999 (depending •
on le name length)
Maximum album number: 99•
Supported sampling frequencies: 32 kHz, •
44.1kHz, 48 kHz
Supported Bit-rates: 32-320 (kbps), •
variable bit rates
ID3 tag v2.0 to v2.3•
Director y nesting up to a maximum of 8 •
levels
Maintenance
Clean the cabinet
Use a soft cloth slightly moistened with •
a mild detergent solution. Do not use
a solution containing alcohol, spirits,
ammonia or abrasives.
Clean discs
When a disc becomes dir ty, clean it with •
a cleaning cloth. Wipe the disc from the
centre out.
18
EN
Page 18
Do not use solvents such as benzene, •
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
After prolonged use, dir t or dust may •
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
English
EN
19
Page 19
9 Troubleshooting
Warning
Never remove the casing of this apparatus. •
Reduce the distance between the remote •
control and the unit.
Inser t the battery with its polarities (+/– •
signs) aligned as indicated.
Replace the battery. •
Aim the remote control directly at the •
sensor on the front of the unit.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the •
unit is connected properly.
Ensure that there is power at the AC •
outlet.
To save power, the unit switches to Eco •
Standby mode automatically after 15
minutes in standby mode.
No sound
Adjust the volume. •
No response from the unit
Disconnect and reconnect the AC power •
plug, then turn on the unit again.
No disc detected
Inser t a disc. •
Check if the disc is inser ted with the print •
side facing inward.
Wait until the moisture condensation at •
the lens has cleared.
Replace or clean the disc. •
Use a nalized CD or correct format disc. •
CannotdisplaysomelesinUSBdevice
The number of folders or les in the USB •
device has exceeded a cer tain limit. This
phenomenon is not a malfunction.
The formats of these les are not •
supported.
USB device not supported
The USB device is incompatible with the •
unit. Try another one.
Poor radio reception
Increase the distance between the unit •
and your T V or VCR .
Fully ex tend and adjust the FM antenna. •
Clock/timer setting erased
Power has been interrupted or the power •
cord has been disconnected.
Reset the clock /timer. •
Timer does not work
Set the clock correctly. •
Switch on the timer. •
Remote control does not work
Before pressing any function button, rst •
select the correct source with the remote
control instead of the main unit.
20
EN
Page 20
Version 1.3: 1st July 2009
PHILIPS CONSUMER ELECTRONICS
WARRANTY POLICY FOR AUSTRALIA
Effective 1st July 2009
Philips provides its Consumer Electronics products with a 1 Ye ar Manufacturers Warranty.
The benefits given to the purchaser by this warranty are in addition to all other rights and remedies,
which the purchaser has in respect of the product under the Tr ade Practices Act or other Commonwealth
or State Law.
The conditions contained in this warranty replace and override the provision of the Philips World-Wide Guarantee
for products purchased in Australia and used in Australia.
Please record the following information for your records and keep in a safe place.
It is essential that you retain your original purchase receipt to make a warranty claim.
Model number : ………………………………………………………
Serial number : ………………………………………………………
Date of purchase : ………………………………………………………
Retailer : ………………………………………………………
If you require assistance with the operation of the product, its features or specifications, you may call the
Philips Technology Care Centre on 1300 363 391 where support is provided by our trained staff.
If the product fails within 12 months from the date of purchase, please return the faulty product to the place of
purchase.
Conditions of Warranty
a. All claims for warranty can only be made at the place of purchase and a copy of the purchase receipt is required
for any warranty claim.
b. The warranty period is valid from the original date of purchase of the product.
c. This warranty extends only to defects in material or workmanship occurring under normal use of the product
when operated in accordance with the instructions.
d. Philips may, at its discretion choose to repair rather than replace this product.
e. If a replacement product is supplied, it is warranted for the remainder of the warranty period, from the original
date of purchase.
f. This Manufacturers Warranty is limited to 3 months for products used in commercial applications.
g. Product accessories are covered by the same warranty period. If an accessory is faulty, please contact the Philips
Technology Care Centre on 1300 363 391.
h. This Manufacturers Warranty is neither transferable nor valid in countries other than Australia.
This Warranty does not cover :-
a. Service costs arising from failure to correctly adjust the controls of the product or to observe the instructions,
or inspections that reveal that the product is in normal working order.
b. Product failures caused by misuse, neglect, accidental breakage, transit damage, un-authorised repairs or
modification by un-authorised persons, external fires, lightning strikes, floods, vermin infestation or liquid spillage.
c. Reception problems, replacement of worn or used batteries or other consumables.
d. Second hand products or refurbished products.
e. Products failure, caused by other products.
English
EN
21
Page 21
22 EN
Page 22
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
DCM292_79_UM_V1.0
Loading...