Page 1
Quick Start Guide
DC910
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
Quick Start Guide
AC power adaptor
Quick Start Guide
User Manual
1
Remote Control
3 X iPod dock adaptors
Pull out the plastic
protective sheet
before use.
Page 2
1
Connect the AC power adaptor of the system.
Setting the clock
Tip
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
POWERFUL BASSPOWERFUL BASS
1
1
In standby mode, press and hold PROG/SET TIME on the remote control.
2
Press VOLUME +/- (or VOL +/- on the remote control) to switch
between 12 hour and 24 hour display.
3
Press PROG/SET TIME on the remote control again to confirm.
➜ The clock digits flash on the display panel.
4
Press VOLUME +/- (or VOL +/- on the remote control) to set the hours.
5
Press PROG/SET TIME on the remote control again.
➜ The clock digits for the minutes flash.
6
Press VOLUME +/- (or VOL +/- on the remote control) to
set the minutes.
7
Press PROG/SET TIME on the remote control to confirm the time.
Page 3
C
Enjoy
Programming and tuning to radio stations
1
Press SOURCE repeatedly (or TUNER on the remote control) to select the
tuner source (FM).
2
Press PROG on the remote control for more than two seconds to program all
available stations in order of waveband.
3
Press PRESET +/- (or ALBUM/PRESET 3 / 4 on the remote control) until
the desired preset station is displayed.
Playing a USB mass storage device/SD/MMC card
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players
(USB 2.0 or USB1.1) and memory cards
1
Insert the USB device’s USB plug into the socket or fully insert the SD/MMC card into
the SD/MMC slot on the top of the system.
2
Press SOURCE once or more (or USB/CARD on the remote control) to select
USB/CARD.
3
Play the available audio files using playback buttons on the set or remote control (such as
2; , S/T).
Page 4
C
Enjoy
Playing Apple iPod using DC910
1
Select the correct dock adaptor, as indicated on each adaptor, then fit it in
the dock.
2
Correctly place the compatible iPod player into the dock.
3
SOURCE on the system repeatedly or iPod on the remote control
Press
to select the iPod source.
4
Power on your iPod player.
5
Select and play your favourite songs stored in the iPod player.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
Notes for remote control:
– First select the source you wish to control by pressing
one of the source select keys on the remote control (for
example iPod, TUNER).
– Then select the desired function (for example ÉÅ,
à, á).
C Royal Philips Electronics N.V. 2008
All rights reserved.
PDCC-ZYL-0835
Loading...