Philips DC570-37 User Manual

Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
DC570
FM antenna
AC power cord
4 X iPod dock adaptors
2
User Manual
Quick Start Guide
1
User manual
Quick Start Guide
POWER TUNER
+
TUNING
TUNING
USBSDMENU AUX
SHUFFLE
TIMER PROG
SET TIME
REPEAT
DSC
ALBUM/
VOL
PRESET
DBB
SLEEP
MUTE
Remote Control
Line-in Cable
Pull out the plastic
Pull out the plastic
protective sheet
protective sheet
before use.
before use.
1
Connect the FM antenna.
FM wire antenna
2
Connect the power cord of the system.
Note:
– Position the FM antenna away from the
speaker wires to avoid electrical interference.
Tip
See the User Manual for how to connect other equipment to this system.
Setting the clock
Important!
– To set clock in the Eco Power mode, press and hold POWER on the set for 3
seconds or more to switch to normal standby mode first before proceeding with the
procedures below.
1
2
1
In standby mode, press PROG/SET TIME for more than 3 seconds.
The clock digits flash.
2
Press S/T to set the minutes.
3
Press
TUNING +/- to set the hours.
4
PROG/SET TIME to confirm the time.
Press
ALBUM/ PRESET
POWER TUNER
+
TUNING
TUNING
USBSDMENU AUX
SHUF F L E
TIMER PROG
SET TIME
REPEAT
DSC
ALBUM/
DSC
DBB
VOL
PRESET
DBB
SLEEP
MUTE
C
Enjoy
Playing a USB mass storage device
With the system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players
1
Insert the USB device’s USB plug into the socket on the set.
(USB 2.0 or USB1.1).
2
Press USB to select USB.
3
Play the USB’s audio files.
Before using the remote control
1 Pull out the plastic protective sheet. 2 Select the source you wish to control by pressing one of the source select keys on the remote control (for example USB, TUNER). 3 Then select the desired function (for example
ÉÅ, S, T)
POWER TUNER
TUNING
TUNING
USBSDMENU AUX
SHUFFLE
TIMER PROG
REPEAT
DSC
ALBUM/
DSC
PRESET
ALBUM/ PRESET
DBB
Remove the plastic protective sheet
DBB
SLEEP
+
SET TIME
VOL
MUTE
Programming and tuning to radio stations
1
Press TUNER to select the tuner source.
2
Press PROG/SET TIME for more than 3 seconds to program all available stations.
3
Press ALBUM/PRESET 3 / 4 until the desired preset station is displayed.
ALBUM/ PRESET
TUNER
POWER TUNER
+
TUNING
TUNING
USBSDMENU AUX
SHUFFLE
TIMER PROG
REPEAT
DSC
ALBUM/
DSC
PRESET
DBB
DBB
SLEEP
PROG
SET TIME
VOL
MUTE
C
Enjoy
Playing Apple iPod using DC570
1
Select the correct dock adaptor, as indicated on each adaptor, then fit it in the dock.
2
Correctly place the compatible iPod player into the dock.
3
Press iPod to select the iPod source.
4
Power on your iPod player.
5
Select and play your favourite songs stored in the iPod player.
Tip
Detailed playback features and additional functions are described in the User Manual.
C Royal Philips Electronics N.V. 2007
All rights reserved.
PDCC-LC/JS-0719
Loading...