Register your product and get support at
www.philips.com/welcome
Docking Entertainment System
DC190
EN User manual
Contents
1 Important 4
Safety 4
Notice 4
2 Your Docking Entertainment System 5
Introduction 5
What’s in the box 5
Overview of the main unit 6
3 Get started 7
Connect power 7
Set clock
Turn on 8
Adjust volume 8
4 Play 8
Play from iPod 8
Play from an external device 9
5 Listen to radio 9
Tune to a radio station 9
Program radio stations automatically 9
Program radio stations manually 10
Select a preset radio station 10
7 Product information 11
Specifications 11
English
8 Troubleshooting 12
8
6 Other features 10
Set the alarm timer 10
Set the sleep timer 11
Adjust display brightness 11
EN
3
1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
specified by the manufacturer.
k Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Apparatus shall not be exposed to
dripping or splashing.
o Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
p This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
Warning
Never remove the casing of this apparatus. •
Never lubricate any par t of this apparatus. •
Never place this apparatus on other electrical •
equipment.
Keep this apparatus away from direct sunlight,
•
naked flames or heat.
Ensure that you always have easy access to the
•
power cord, plug or adaptor to disconnect the
appar atus from the power.
Notice
This product complies with the
radio interference requirements
of the European Community.
This product complies with the
requirements of the following directives and
guidelines: 2004/108/EC + 2006/95/EC
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
4
EN
Recycling
Your product is designed and
manufactured with high quality
materials and components, which
can be recycled and reused.
When you see the crossed-out
wheel bin symbol attached to a
product, it means the product
is covered by the European
Directive 2002/96/EC:
Never dispose of your product
with other household waste. Please inform
yourself about the local rules on the separate
collection of electrical and electronic products.
The correct disposal of your old product helps
prevent potentially negative consequences on
the environment and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from the
iPod, other audio devices, or the radio.
The radio, iPod, or buzzer can be set as the
alarm timer. You can set two alarm timers to go
off at different times.
What’s in the box
Check and identify the contents of your
package:
Main unit•
1 x AC adaptor•
1 x MP3 link cable•
User manual•
Quick star t guide•
English
EN
5
Overview of the main unit
6
EN
a ALARM 1/ALARM 2
Set the alarm timer.•
View the alarm time.•
Turn off the alarm tone.•
b REPEAT ALARM/BRIGHTNESS
CONTROL
Repeat the alarm.•
Adjust the display brightness.•
c
Turn on the unit or switch to •
standby mode.
d SOURCE
Select a source: iPod, FM tuner or •
MP3 link.
e PRESET +/-
Select a preset radio station.•
Adjust time.•
f Display panel
Show current status.•
g Dock compartment
h
Star t or pause iPod play.•
i
/
Skip to the previous/next audio file.•
Search within an audio file.•
j TUNING +/-
Tune to a radio station.•
Adjust time.•
k TIME SET/AUTO SCAN
Set the clock.•
Scan radio stations.•
l WAKE TO iPod/RADIO/BUZZ
Select alarm mode.•
m MP3-LINK
Jack for an external audio device.•
n DC IN
Power supply socket.•
o iPod dock
Load an iPod player.•
p VOL +/-
Adjust volume.•
Adjust time.•
q SLEEP
Set the sleep timer.•
3 Get started
Caution
Use of controls or adjustments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock ! When you unplug the
•
AC adaptor, always pull the plug from the
socket . Never pull the cord.
Before connecting the AC adaptor, ensure you
•
have completed all other connections.
Note
The type plate is located on the bot tom of the •
main unit.
1 Connect one end of the AC adaptor to
the DC IN socket on the main unit.
English
EN
7
2 Connect the other end of the AC
adaptor to the wall outlet.
Switch to standby
1 Press again to switch the unit to
standby mode.
The clock (if set) appears on the »
display panel.
Adjust volume
During play, press VOL +/- to increase/
1
decrease the volume.
4 Play
Play from iPod
Set clock
In standby mode, press and hold TIME
1
SET/AUTO SCAN for 2 seconds.
The hour digits begin to blink. »
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN.
The minute digits begin to blink. »
4 Press TUNING +/- to set the minute.
5 Press TIME SET/AUTO SCAN to
confirm.
The week day digits begin to blink. »
6 Press TUNING +/- to set the week day.
7 Press TIME SET/AUTO SCAN to
confirm.
Turn on
Press .
1
The unit switches to the last selected »
source.
You can enjoy audio from iPod through this unit.
Compatible iPod
Apple iPod models with a 30-pin dock
connector:
iPod classic, iPod touch, iPod nano, iPod •
5th generation (video), iPod with color
display, iPod mini.
Load the iPod
1 Push to open the dock compartment.
8
EN
2 Place the iPod in the dock.
Remove the iPod
1 Pull the iPod out of the dock.
Listen to the iPod
1 Ensure that the iPod is loaded correctly.
2 Press SOURCE repeatedly to select iPod
source.
The connected iPod plays automatically. »
To pause/resume play, press •
To skip to a track, press •
To search during play, press and •
hold
/ , then release to resume
normal play.
.
/ .
Charge the iPod
When the unit is connected to power, the
docked iPod begins to charge.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press SOURCE repeatedly to select MP3
link source.
2 Connect the supplied MP3 link cable to:
the • MP3-LINK jack (3.5mm) on the
back of the unit.
the headphone jack on an external •
device.
3 Star t to play the device (see the device
user manual).
5 Listen to radio
Note
Only FM radio reception is available on this •
unit.
Tune to a radio station
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
•
the position of the antenna.
1 Press SOURCE repeatedly to select FM
tuner.
2 Press and hold TUNING +/- for more
than 2 seconds.
The radio tunes to a station with »
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press •
TUNING +/- repeatedly until you
find optimal reception.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1 In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
All available stations are programmed »
in the order of waveband reception
strength.
The first programmed radio station is »
broadcast automatically.
English
EN
9
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1 Tune to a radio station.
2 Press TIME SET/AUTO SCAN to activate
the program mode.
The preset number begins to blink. »
3 Press PRESET +/- to select a number.
4 Press TIME SET/AUTO SCAN to
confirm.
5 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
Press PRESET +/- to select a preset
1
number.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1 Ensure that you have set the clock
correctly.
2 Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»
or and hour digits begin to
blink.
3 Press TUNING +/- repeatedly to set the
hour.
4 Press ALARM 1 or ALARM 2 to confirm.
»
or and minute digits begin
to blink.
5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select whether to
ring alarm on weekdays or at weekend.
“L XX(volume level)” begins to blink. »
7 Repeat steps 3-4 to set the maximum
alarm volume.
Set alarm mode
1 Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
When the alarm time comes, the »
selected iPod, radio or buzzer turns on.
Tip
If iPod source is selected but no iPod is loaded, •
the buzzer is selec ted automatically.
Activate and deactivate the alarm
timer
1 Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
If the timer is activated, »
displayed.
To deactivate the alarm timer, press •
ALARM 1 or ALARM 2 repeatedly
until
is displayed.
If the timer is deactivated, »
disappears.
or is
or
Repeat alarm
1 When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL.
The alarm repeats ringing minutes later. »
Tip
You can press • TUNING+/- to adjust interval
to repeat alarm.
10
EN
Stop alarm ring
1 When the alarm rings, press the
corresponding ALARM 1 or ALARM 2.
The alarm stops but the alarm settings »
remain.
7 Product
information
Note
English
View the alarm settings
1 Press ALARM 1 or ALARM 2.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 Press SLEEP repeatedly to select a set
period of time (in minutes).
When the sleep timer is activated, the »
display shows
To deactivate sleep timer
.
1 Press SLEEP repeatedly until [OFF] (off )
is displayed.
When the sleep timer is deactivated, »
disappears on the display.
Note
When the sleep timer is activated, the volume
•
will gradually decrease.
Adjust display brightness
Press BRIGHTNESS CONTROL
1
repeatedly to select different levels of
display brightness.
Product information is subject to change •
without prior notice.
Specifications
Amplifier
Rated Output Power 2X1.5 W RMS
Signal to Noise Ratio >55 dB
MP3 Link 0.6 V RMS 10 kohm
Tuner
FM
Tuning Range 87.5 - 108 MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity <28 dBu
Total Harmonic Distortion <3%
Signal to Noise Ratio >45 dB
General information
AC power (power
adaptor)
Operation Power
Consumption
Standby Power
Consumption
Dimensions
- Main Unit
(W x H x D)
Weight
- Main Unit 0.44 kg
<22 dBu
<45 dBu
Input: 100-240V~,
50/60Hz, 0.4A; Output:
6.5V
1.3A; Brand
name: Philips; Model
No.: AS090-065-AB130
<5W
<2W
144 x 144 x 62 mm
EN
11
8 Troubleshooting
Warning
Never remove the casing of this apparatus. •
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the •
unit is connected properly.
Ensure that there is power at the AC •
outlet.
No sound
Adjust the volume. •
No response from the unit
Disconnect and reconnect the AC power •
plug, then turn on the unit again.
Poor radio reception
Increase the distance between the unit •
and your TV or VCR .
Fully ex tend the FM antenna. •
Timer does not work
Set the clock correctly. •
Switch on the timer. •
Clock/timer setting erased
Power has been interrupted or the power •
plug has been disconnected.
Reset the clock/timer. •
12
EN
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
DC190_05_UM_V1.1
Loading...