Philips continuously strives to improve its products. Due to software
upgrading, some contents in this user guide may be different from your
product.Philips reserves the rights to revise this user guide or withdraw it
at any time without prior notice. Please take your product as standard.
1
Charging cradle
Tips:
You can use the provided charging cradle to charge your phone
conveniently, it eliminating the need to attach a charging cable to your
phone every time when you want to charge the phone, you can also
mount the charging cradle on the wall.
To use the charging cradle:
1
Insert your phone into the slot of the charging cradle, please make
sure the metal contact on the bottom of the phone is contacted well
with the pogo pins on the charging cradle.
2
Connect the charging cradle to the power adapter by micro USB
cable.
To mount the charging cradle to the wall
1
Secure the wall mounting kit to the wall by inserting two screws into
the holes.
2
Attach the charging cradle to the wall mounting kit.
•
You can also place your phone into the charging cradle to magnify sound when listening
music.
2
Home screen
Status Bar
Shortcuts
Your phone’s home screen consists of the following areas:
Keys
Learn about the main keys.
KeyDefinitionFunction
DialMake or answer a call.
D
ConfirmConfirm an option.
C
Hang-up/
H
Power/Exit
LLeft soft key Select the options on the screen.
LRight soft key Select the options on the screen.
Volume key Adjust the volume.
V
Torch Turn on/off the torch.
T
Lock/Unlock Slide down to lock/unlock the home screen.
L
SOSLong press to call the preset SOS number.
Press to view All calls/Dialed calls/Missed calls/
Received calls.
Press up/down key to navigate.
End a call;
Return to home screen;
Hold to turn on/turn off the phone.
Zoom in the contents on the screen when use
the digital magnifier.
Zoom out the enlarged contents on the screen
when use the digital magnifier.
3
Icons & symbols
Learn about the icons and symbols on the screen.
IconsDefinitionFunction
Silent
Vibration only
Battery
SMS
Missed call
GSM network
Bluetooth
Headset
Alarm
Roaming
Key lock
Your phone will not ring when receiving
a call.
Your phone will vibrate when receiving a
call.
The bars indicate the battery level.
You have a new message.
You have missed a call.
Your phone is connected to a GSM
network. The more bars are shown the
better reception is.
Bluetooth is activated.
The headset is plugged into the phone.
The alarm clock is activated.
Displayed when your phone is registered
to a network other than your own
(especially when you’re abroad).
The keypad has been locked.
4
Getting started
Insert SIM card and Charge the battery
Learn about installing SIM card and charging the battery for the first use.
Insert SIM card
1
Remove the back cover.
3
Insert the SIM card.
5
Replace the back cover.
2
Take out the battery.
4
Install the battery.
5
Charge the battery
Tips:
•
You can use the phone while it is charging.
•
Keeping the charger plugged to the mobile
phone when the battery is fully charged will
not damage the battery. The only way to
turn off the charger is to unplug it, so it is
advisable to use an easily accessible power
socket.
•
If you do not intend to use your phone for
several days, we recommend that you
remove the battery.
•
If a fully charged battery left unused, it will
lost its charge over time.
•
If a battery is being used for the first time or
the battery has not been used for a
prolonged period, it may take longer time to
recharge.
You can expand the memory of your
phone by adding a micro-SD card.
1
Unlock the memory card cover.
2
Align your micro-SD card with the
slot. Put it in place.
3
Press down the card holder and
pull it until it is locked.
A new battery is partially charged. The battery icon in the upper-right
corner shows the battery level of charging status.
Insert a Micro SD card (Memory card)
6
Customize your phone
Note:
Note:
Customize your phone to match your preferences.
Set time & date
1
On the home screen, go to Menu>Settings>Date & Time.
2
Select Set time/date: Select the desired digits.
SIM settings
Go to Menu>Settings>General>Primary SIM Setting to set reply
call/message or transfer data by SIM1/SIM2.
•
The PIN code is preconfigured and communicated to you by your network operator or
retailer.
•
If you enter an incorrect PIN code three times in succession, your SIM card will be
blocked. To unblock it, you must request the PUK code from your operator.
•
If you enter an incorrect PUK code ten times in succession, the SIM card will be locked
permanently. When this happens, please contact your network operator or retailer.
SOS settings
With SOS function, you can easily dial the preset number in emergency
situations.
1
Go to Menu>Settings>SOS settings>SOS number.
2
Enter the preset number directly or press LOptions>Add to
select a number from the contact list.
3
Press Cto save it.
4
Long press the SOS button, the alarm sounds, at the same time, dial
the preset numbers and send SMS to them (user can preset 3
numbers).
•
Default calling and sending SMS by the primary SIM, if the primary SIM is disable, calling
by the other SIM.
7
Using your phone
Tips:
Tips:
Use basic call functions
Learn to make or answer a call and use basic call functions.
Make a call
1
Enter the phone number.
2
Press D
3
•
Answer and end a call
1
2
3
•
Speed dial
On the home screen, you can call a number by long pressing a numeric
key.
To assign a contact to a speed-dial key:
1
2
3
Use blacklist
Learn about how to set the blacklist; you can reject the incoming calls
or messages from those included in the blacklist.
Activate blacklist
1
dial the number.
Press H to hang up.
For international calls, long press "0" to enter the "+" sign for the international prefix.
Press
D
to answer the call.
Press LH-Free to select hands free mode during a call.
Press H to hang up.
You can press the side volume key to adjust the volume.
Go to Menu>Setting>General>Speed dials, set the status to On.
Select Set numbers to choose a numberic key and press LEdit
to select a phone number from the contact list.
Press Cto save it.
Go to Menu>Settings>Call settings>Blacklist>Reject numbers
in blacklist
.
8
2
Note:
Press Cto activate blacklist function.
Add a phone number to blacklist
1
Go to Blacklist>Blacklist numbers.
2
Edit the blacklist, add contacts by entering a phone number or select
a contact from phonebook.
Receive and send messages
You can use the Messages menu to send text message, multimedia
message.
Send a SMS message
1
Select Menu>Messages>Write message>SMS.
2
Write your text message.
3
Press C, select Enter number to enter number directly or select
Add from Phonebook to select the recipient(s) from the contact
list and press L
4
Press Cto send the message.
Send a MMS message
1
Select Menu>Messages>Write message>MMS.
2
Edit contents, press LOptions to select add picture/sound/video/
subject and press
3
Press C, select Enter recipient to enter number directly or select
Add from Phonebook to select the recipient(s) from the contact
list and press L
4
Press Cto send the message.
•
Copyright protected pictures and sound cannot be sent by MMS.
Enter text
Your mobile phone supports a number of text entry methods, including
English input, HI input, numeric input and symbol input.
Add to confirm.
Cto add multimedia contents
Add to confirm.
9
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.