How it Works
Philips
Loading...
CSS5123/93
brochure [nl]
3 pgs607.98 Kb0
instructions for use
38 pgs12.94 Mb0
quick start guide
10 pgs768.08 Kb0
Table of contents
Loading...

Philips CSS5123/93 instructions for use

Register your product and get support at
www.philips.com/welcome
CSS5123
Contents
1 Help and support 2
2 Notice 2
RMVB end user agreement (Asia Pacic
and China only)
3 Important 4
4 Your SoundBar 6
6 Use your SoundBar 13
English
7 Change settings 21
3
8 Update software 24
9 Productspecications 25
5 Connect your SoundBar 8
10 Troubleshooting 28
11 Index 30
EN
1

1 Help and support

2 Notice
Download a software update and nd answers to
many frequently answered questions (FAQs) on your product at www.philips.com.

FAQs

If you have a problem, refer to the frequently asked questions (FAQs) for this SoundBar at www. philips.com/support. If you still need help, contact Philips Consumer Care in your country.
Warning
Do not attempt to repair your SoundBar
•
yourself. This may cause severe injury, irreparable damage to your SoundBar, or void your warranty.

Contact Philips

If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back or bottom of your product. Note the numbers before you call Philips: Model No. __________________________ Serial No. ___________________________
This section contains the legal and trademark notices.
Copyright
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Copyright in the UK
Recording and playback of material may require consent. See Copyright Act 1956 and The Performers Protection Acts 1958 to 1972.
Compliance
This product is in compliance with the essential requirements and other relevant provisions of Directives 2006/95/EC (Low Voltage), 2004/108/ EC (EMC).
2 EN
* Wireless and Ethernet LAN functions are authorized for indoor use only. Hereby, Philips Consumer Lifestyle, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www.philips.com/support.

Mains fuse (UK only)

This information applies only to products with a UK mains plug.
This product is tted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about what type of fuse to use. Caution: To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord.

Open source software

Philips Electronics Singapore Pte Ltd hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain source code, please contact open.source@philips.com. If you prefer not
to use email or if you do not receive conrmation
receipt within a week after mailing to this email address, please write to "Open Source Team, Philips Intellectual Property & Standards, P.O. Box 220, 5600 AE Eindhoven, The Netherlands". If you
do not receive timely conrmation of your letter,
please email to the email address above. The texts of the licenses and acknowledgements for open source software used in this product are included
on a separate leaet.
RMVB end user agreement
(AsiaPacicandChinaonly)
• End User is not allowed to modify, translate,
reverse engineer, decompile, dissemble or use other means to discover the source code or otherwise replicate the functionality of the Real Format Client Code, except to the extent that this restriction is expressly prohibited by applicable law.
• RealNetworks Inc. disclaims all warranties
and conditions other than those set forth in this Agreement which are in lieu of all other warranties, whether express and implied, including but not limited to any implied warranties or conditions of merchantability
and tness for a particular purpose; and
effectively exclude all liability for indirect, special, incidental and consequential damages,
such as but not limited to lost prots.
Trademarks
Android is a trademark of Google Inc. Use of this trademark is subject to Google permissions.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
English
Notes to End User:
By using this product with RealNetworks software and services, the end user agrees to the following terms of REALNETWORKS, INC:
• End User may only use the software for
private, non-commercial use in accordance with the terms of RealNetworks EULA .
DivX , DivX Certied , DivX Plus HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. ABOUT DIVX VIDEO: DivX format created by DivX, LLC, a subsidiary of Rovi
is a digital video
EN
3
Corporation. This is an ofcial DivX Certied device that plays DivX video. Visit divx.com for more information and software tools to convert
your les into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certied
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
device must be registered in order to
3 Important
Read and understand all instructions before you use your SoundBar. If damage is caused by failure to follow instructions, the warranty does not apply.
Safety
HDMI, the HDMI logo, and High-Denition
Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC in the United States and other countries.
The Wi-Fi CERTIFIED Logo is a certication mark
of the Wi-Fi Alliance.
DLNA , the DLNA Logo and DLNA CERTIFIED
are trademarks, service marks, or certication
marks of the Digital Living Network Alliance.
Riskofelectricshockorre!
• Never expose the product and accessories to
rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
• Never place the product and accessories
near naked ames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation slots or other openings on the product.
• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Disconnect the product from the power outlet before lightning storms.
• When you disconnect the power cord, always pull the plug, never the cable.
Riskofshortcircuitorre!
• Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different.
RiskofinjuryordamagetotheSoundBar!
• For wall-mountable products, use only the supplied wall mount bracket. Secure the wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage.
• Never place the product or any objects on power cords or on other electrical equipment.
4 EN
• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.
• Parts of this product can be made of glass. Handle with care to avoid injury and damage.
Riskofoverheating!
• Never install this product in a conned space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.
Riskofcontamination!
• Do not mix batteries (old and new or carbon
and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only with the same or equivalent type.
• Remove batteries if they are exhausted or if
the remote control is not to be used for a long time.
• Batteries contain chemical substances, they
should be disposed of properly.
Riskofswallowingbatteries!
• The product/remote control may or may
not contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
• If the battery has been swallowed, seek
immediate medical attention.
• When you change the batteries, always
keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery.
• If the battery compar tment cannot be
completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.
Care for your product
Use only microber cloth to clean the product.
Care of the environment
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
English
EN
5
4 Your SoundBar
Congratulations on your purchase, and welcome
to Philips! To fully benet from the support that
Philips offers, register your SoundBar at www. philips.com/welcome.
Main unit
1 2 3
a Standby indicator
When the SoundBar is in standby, the standby indicator turns red.
b Source indicator/ Volume indicator
Source indicator lights up when a source is selected. When you change volume, volume indicators light up to indicate the volume level.
• ARC: Lights up when you select HDMI
ARC as the input source.
• OPTICAL: Lights up when you select
Optical as the input source.
• AUX: Lights up when you select AUX as
the input source.
• COAXIAL: Lights up when you select
COAXIAL as the input source.
c Sound mode indicator/ Volume indicator
Sound mode indicator lights up when a you play an audio source with surround sound. When you change volume, volume indicators light up to indicate the volume level.
• DTS: Lights up when you play DTS audio.
• DOLBY D: Lights up when you play
Dolby audio.
• V.SURR: Lights up when you select Virtual
Surround sound.
Remote control
a (Standby-On)
• Switch the SoundBar on or to standby.
When the SoundBar is in standby, the standby indicator turns red.
• When EasyLink is enabled, press and hold
for at least three seconds to switch all connected HDMI CEC compliant devices to standby.
6 EN
b USB
Switch to USB storage device.
c (Home)
Access the home menu.
d
Select an audio language when you play a video.
e Navigation buttons ( / / / )
Navigate menus.
f
Conrm an entry or selection.
g
Access more play options while playing a
multimedia le from a USB storage device or
PC (through DLNA).
h +/- (Volume)
Increase or decrease volume.
i (Play)
Start or resume play.
j (Pause)
Pause play.
k / (Fast Backward/ Fast Forward)
Search backwards or forward.
l
Zoom into a video scene or picture.
m +/-
Increase or decrease treble.
n +/-
Increase or decrease bass.
o
Toggle through sound modes.
p
Toggle between stereo and vir tual surround sound.
q
Select subtitle language for video.
r / (Previous/Next)
Skip to the previous or next track, chapter
or le.
s (Stop)
Stop play.
t (Mute)
Mute or restore volume.
u -
Return to a previous menu screen.
v
Display information about the current picture, audio, or video.
w AUDIO SOURCE (Audio Source)
• AUX: Switch your audio source to the
AUX connection.
• :Switch your audio source to the
coaxial connection.
• : Switch your audio source to
the optical connection. Press twice to switch to HDMI ARC source when your SoundBar is connected to the TV through an HDMI ARC connection.
EasyLink controls
With Easylink, you can control your SoundBar, TV and the connected devices with the standby button on your SoundBar remote control.
• (Standby-On): Press and hold to switch
your SoundBar, TV, and the connected devices to standby.
English
EN
7
5 Connect your
SoundBar
This section helps you connect your SoundBar to a TV and other devices. For a comprehensive interactive guide, see www.connectivityguide. philips.com.
Note
The SoundBar and the subwoofer automatically
•
pair up when you switch on the SoundBar and the subwoofer.
Connectors
Note
For identication and supply ratings, refer to the
•
type plate at the back or bottom of the product.
• Before you make or change any connections,
make sure that all devices are disconnected from the power outlet.
Subwoofer
Follow the steps below to position and connect your subwoofer.
Position
Place the subwoofer at least one meter (three feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below.
Connect other devices to your SoundBar.
Side left
1
USB
Audio, video or picture input from a USB storage device.
Back connectors
LR
HDMI OUT (ARC) LAN
AUX
AC MAINS~
1 3 4
a AC MAINS~
Connect to the power supply.
b (Standby-On)
• Switch the SoundBar on or to standby.
• When the SoundBar is in standby, the
standby indicator turns red.
c DIGITAL IN - OPTICAL
Connect to an optical audio output on the TV or a digital device.
d DIGITAL IN - COAXIAL
Connect to a coaxial audio output on the TV or a digital device.
DIGITAL IN
COAXIALOPTICAL
AUDIO IN
5 762
8 EN
e AUDIO IN - AUX
Connect to an analog audio output on the TV or an analog device.
f HDMI OUT (ARC)
Connect to the HDMI input on the TV.
g LAN
Connect to the LAN input on a broadband modem or router.
Option 2: Connect to TV through HDMI
Best quality video
If your TV is not HDMI ARC compliant, connect your SoundBar to the TV through a standard HDMI connection. With a standard HDMI connection, you need an additional audio cable to play the audio from the TV through your SoundBar (see 'Connect audio from TV and other devices' on page 10).
English
Connect to TV
Connect your SoundBar to a TV to watch videos. You can listen to audio from TV programs through your SoundBar. Use the best quality connection available on your SoundBar and TV.
Option 1: Connect to TV through HDMI (ARC)
Your SoundBar suppor ts HDMI version 1.4 ­Audio Return Channel (ARC). If your TV is HDMI ARC compliant, connect your SoundBar to the TV through the HDMI ARC connection. With HDMI ARC, you do not need an additional audio cable to play audio from TV through your SoundBar.
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your SoundBar to the HDMI ARC connector on the TV. The HDMI ARC connector on the TV might be labeled HDMI IN or HDMI. For details on TV connectors, see the TV user manual.
TV
1 Using a High Speed HDMI cable, connect
the HDMI OUT (ARC) connector on your SoundBar to the HDMI connector on the TV. The HDMI connector on the TV might be labeled HDMI IN.
TV
2 On your TV, turn on HDMI-CEC. For details,
see the TV user manual.
3 To play audio from TV programs through
your SoundBar, connect an additional audio cable (see 'Connect audio from TV and other devices' on page 10).
4 If audio from the TV does not play
automatically, set up the audio manually (see 'Set up audio for connected devices' on page
10).
2 On your TV, turn on HDMI-CEC. For details,
see the TV user manual.
3 If audio from TV does not play automatically,
set up the audio manually (see 'Set up audio for connected devices' on page 10).
EN
9
Connect audio from TV and other devices
Play audio from TV or other devices through your SoundBar. Use the best quality connection available on other devices.
Note
The audio connections in this user manual
•
are only recommendations. You can use other connections too.
• When your SoundBar and TV are connected
through HDMI ARC, an audio connection is not required.
Option 1: Connect audio through a digital optical cable
Best quality audio
Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the device. The digital optical connector might be labeled SPDIF, SPDIF OUT, or OPTICAL. (Cable not supplied)
TV
Option 2: Connect audio through a digital coaxial cable
Good quality audio
Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/ DIGITAL OUT connector on the device. The digital coaxial connector might be labeled DIGITAL AUDIO OUT. (Cable not supplied)
Option 3: Connect audio through analog audio cables
Basic quality audio
Using an analog cable, connect the AUX connectors on your SoundBar to the audio connectors on the device. (Cable not supplied)
VCR
Set up audio for connected devices
When you connect a device to your SoundBar, check the audio settings.
1 On your TV and other devices, turn on
HDMI-CEC. For details, see the user manual of the TV and the other device.
2 Select 'Amplier' from the TV speakers menu
to hear sound from the SoundBar. For details, see the TV user manual.
3 On your SoundBar, turn on System Audio
Control. If the connected device is not HDMI-CEC compliant, press the correct source button on the remote control to select the audio input.
10 EN
Loading...
+ 26 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use