![](/html/1e/1e48/1e483c5a16b791c74f043553005bfe43efcd1cc5cf187986716de703e0cbed07/bg1.png)
DISCRETE SEMICONDUCTORS
DATA SH EET
CR1296
Triple video driver hybrid amplifier
Product specification
File under Discrete Semiconductors, SC05
1997 Jul 09
![](/html/1e/1e48/1e483c5a16b791c74f043553005bfe43efcd1cc5cf187986716de703e0cbed07/bg2.png)
Philips Semiconductors Product specification
Triple video driver hybrid amplifier CR1296
FEATURES
• Cascode configuration
• Typical voltage gain of 15
• Directly driven by pre-amplifier: no buffer required
• Typical transition times (10 to 90%) with CL=10pF
at 50 V
swing: tr= 5 ns; tf= 2.5 ns
(p-p
• Typical small signal bandwidth 140 MHz
• Suited for both AC and DC coupling.
APPLICATIONS
• Cathode-ray tube (CRT) drivers in high-resolution colour
monitors.
DESCRIPTION
Hybrid amplifier module in cascode configuration
comprising three video amplifiers in a SOT454A package.
PINNING - SOT454A
PIN DESCRIPTION
1 input A
2 compensation A
3 output A
4 ground
5 output B
6 compensation B
7 input B
8 supply voltage 1 (V
9 ground
10 supply voltage 2 (V
11 input C
12 compensation C
13 output C
14 supply voltage 3 (V
handbook, halfpage
) (8 V)
S1
) (8 V)
S2
) (80 V)
S3
1
14
MBK101
Fig.1 Simplified outline (SOT454A).
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
V
S1
S2
V
S3
T
mb
T
stg
power supply voltage (DC) − 10 V
power supply voltage (DC) − 10 V
power supply voltage (DC) − 90 V
operating mounting base temperature note 1 −20 +100 °C
storage temperature −40 +125 °C
Note
1. The module flange is the mounting base.
1997 Jul 09 2
![](/html/1e/1e48/1e483c5a16b791c74f043553005bfe43efcd1cc5cf187986716de703e0cbed07/bg3.png)
Philips Semiconductors Product specification
Triple video driver hybrid amplifier CR1296
CHARACTERISTICS
V
S1=VS2
specified.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
t
r
t
f
BW small signal bandwidth between −3 dB points; note 2 − 140 − MHz
NLN non-linearity VO=15to75V − 25%
A
V
Notes
1. Input signal delivered by pre-IC: t
2. Sinewave output signal: 1 V
APPLICATION INFORMATION
=8V; VS3= 80 V; Tmb=25°C; CL= 10 pF; output swing = 50 V
with 45 V DC offset; unless otherwise
(p-p)
rise time transient response 10 to 90%; note 1 − 56ns
fall time transient response 10 to 90%; note 1 − 2.5 3.5 ns
DC voltage gain 14 15 16
≤ 1 ns; tf≤ 1 ns; V
r
.
(p-p)
= 3.3 V; see Fig. 2.
i(p-p)
Application information is available in Application note AN96074 ‘Video Amplifier Board with TDA4885 and CR1296’.
A copy of this report can be requested via the local sales office.
Heatsink design is supported by Figs. 3, 4 and 5.
1 kΩ
1 µH
VS3 (80V)
CR1296
ONE AMPLIFIER
V
out
C
load
compensation
33 Ω
= 10 pF
handbook, full pagewidth
GENERATOR
VS1, VS2 (8V)
V
termination
generator
in
Fig.2 Test circuit.
1997 Jul 09 3
GND
33 pF
MGK452