Philips CEM250/55 User Manual
Register your product and get support at
Car Entertainment System
CEM250
EN User manual 3
CEM250-55-IFU-ENG.indd 1CEM250-55-IFU-ENG.indd 1 2008-10-28 10:27:482008-10-28 10:27:48
Contents
1 Important 4
Safety 4
Notice 4
2 Your Car Audio System 7
Introduction 7
What’s in the box 7
Overview of the main unit 8
Overview of the remote control 9
3 Get started 11
Install the car audio 11
Install remote control battery 16
Turn on 16
Set clock 16
4 Listen to radio 17
Tune to a radio station 17
Store radio stations in memory 17
Tune to a preset station 17
5 Use bluetooth devices 18
Pairing bluetooth devices 18
Play audio fi les 18
Voice dialing 18
Make a call 18
Call waiting 19
Call transfer 19
Terminate call 19
7 Adjust sound 23
Adjust volume 23
Turn Dynamic Bass Boost (DBB) on/off 23
Select preset equalizer 23
Other sound settings 23
8 Adjust system settings 24
Set PIN code 24
Set bluetooth connection 24
Select blackout setting 24
Turn demo mode on/off 24
Change button backlight color 24
Select start volume 24
Turn beep sound on/off 25
Turn display scroll on/off 25
Select shock-protect setting 25
Reset 25
9 Additional information 27
Detach the front panel 27
Replace fuse 27
Remove the unit 27
10 Product information 28
11 Troubleshooting 30
12 Glossar y 31
English
6 Play audio fi les 20
Play a disc 20
Play from USB/SD/MMC device 20
Control play 21
Search for an MP3/WMA track 21
View play information 21
Random play 21
Repeat play 22
Intro play 22
Connect external sound source 22
EN
3
CEM250-55-IFU-ENG.indd 3CEM250-55-IFU-ENG.indd 3 2008-10-28 10:27:522008-10-28 10:27:52
1 Important
English
Safety
•
Read and understand all instructions
before you use your unit. If damage is
caused by failure to follow instructions, the
warranty does not apply.
•
This unit is designed for negative ground
(earth) 12 V DC operation only.
•
To ensure safe driving, adjust the volume to
a safe and comfortable level.
•
Improper fuses can cause damage or
fi re. When you need to change the fuse,
consult a professional.
•
Use only the supplied mounting hardware
for a safe and secure installation.
•
To avoid short circuit, do not expose the
unit, remote control or remote control
batteries to rain or water.
•
Never insert objects into the ventilation
slots or other openings on the unit.
•
Clean the unit and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the unit.
•
Never place any objects other than discs
into the unit.
•
Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
•
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the unit screen! Never
•
touch, push, rub or strike the screen with
any object.
Caution
Use of controls or adjustments or performance of
•
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Notice
Seja responsável
Seja responsável
Respeite os direitos autorais
Respeite os direitos autorais
The making of unauthorized copies of copyprotected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
FCC Declaration of conformity
Model number: PHILIPS CEM250/55
Trade Name: Philips
Responsible Party:
Philips Consumer Electronics
P. O. Box 671539
Marietta, GA 30006-0026
1-800-PHILIPS (744-5477)
Notice of compliance
The set complies with the FCC-Rules, Part 15
and with 21 CFR 1040.10. Operation is subject
to the following two conditions:
1.This device may not cause harmful
interference, and
2.This device must accept any interference
received, including interference that may cause
undesired operation.
FCC Notice (For U.S. and Canada)
Note:
This equipment has been tested and found
to comply with the limits for a Class B digital
device,pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
4 EN
CEM250-55-IFU-ENG.indd 4CEM250-55-IFU-ENG.indd 4 2008-10-28 10:27:532008-10-28 10:27:53
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Relocate the receiving antenna.
– Increase the separation between the
equipment and receiver
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/
TV technician for help.
IMPORTANT!
modifi cations not authorized by the
manufacturer may void users authority to
operate this device.
This unit includes these labels:
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
English
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
CEM250-55-IFU-ENG.indd 5CEM250-55-IFU-ENG.indd 5 2008-10-28 10:27:542008-10-28 10:27:54
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC, 2006/95/EC.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
EN 5
packaging materials, exhausted batteries and old
equipment.
English
Any changes or modifi cations made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2008 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifi cations are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
6 EN
CEM250-55-IFU-ENG.indd 6CEM250-55-IFU-ENG.indd 6 2008-10-28 10:27:552008-10-28 10:27:55
2 Your Car Audio
System
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.Philips.com/welcome.
l Quick start guide
m Standard connector
a
a
b
b
English
Introduction
With the in-car audio system, you can enjoy
your drive while you listen to:
•
FM or AM (MW) radio
•
Audio from CD or MP3 disc
•
Audio from your mobile phone
•
Audio from a USB drive
•
Audio from a SD/SDHC/MMC card
•
Audio from external devices
Besides, you can dail number, answer and hang
up a call on the audio system.
What’s in the box
Check and identify the contents of your
package:
a Car audio system
b Remote control
c Microphone
d Microphone hold
e Rubber cushion
f Disassembly tool (2 pieces)
g Front panel
h Carrying case for front panel
i Trim plate (2 pieces)
j Screw (4 pieces)
k User manual
c
c
gh
gh
i
i
k lm
k lm
de f
de f
j
j
EN 7
CEM250-55-IFU-ENG.indd 7CEM250-55-IFU-ENG.indd 7 2008-10-28 10:27:552008-10-28 10:27:55
Overview of the main unit
English
a
a
x
x
b
b
s
s
c
c
w
w
d
d
v
v
r q po nml kj
r q po nml kj
e
e
u
u
f
f
g
g
t
t
h
h
i
i
•
a (green/red)
•
Answer phone (green)
•
Dial number (green)
•
View call log (green)
•
Terminate call (red)
b
/ DBB
•
Select tuner band.
•
Select MP3/WMA folder.
•
Scroll up menu.
•
Turn on or off Dynamic Bass Boost
(DBB) sound.
c SOURCE
•
Select audio source.
8 EN
CEM250-55-IFU-ENG.indd 8CEM250-55-IFU-ENG.indd 8 2008-10-28 10:27:572008-10-28 10:27:57
d
e MENU / DISP
Connect or disconnect bluetooth
connection,
/ MUTE
•
Turn the unit on or off.
•
Adjust volume.
•
Confi rm selection.
•
Enter characters for search.
•
Dial phone number.
•
Mute or unmute the volume.
•
Display radio frequency, clock and
radio program type (if available).
•
Display track, elapsed time, artist,
alburm, title, folder, fi le and clock.
•
Access system menu.
f
•
Return to previous menu.
•
Stop search.
•
Disable screen blackout.
g Display panel
h
•
Unlock the panel
i USB socket
j External equipment socket
k 6
Select preset station no. 6
•
l 5
Select preset station no. 5
•
m SHUF, 4
Set shuffl e play mode.
•
Select preset station no. 4
•
n 3, REP
Set repeat play mode.
•
Select preset station no. 3
•
o INTRO, 2
Turn intro play on or off.
•
Select preset station no. 2
•
p 1 ,
q
r EQ/Audio
s
•
Start play
•
Pause or resume play.
•
Select preset station no. 1
/
•
Tune for radio station
•
Skip/search for MP3/WMA track.
•
Select equalizer (EQ) setting.
•
Access audio setting menu.
/ SEARCH
•
Select tuner band.
•
Store radio stations automatically.
•
Scroll up or down menu.
•
Select MP3/WMA folder.
Search a track or folder.
•
t Panel power connection
u Disc slot
v
Take disc out.
•
w RESET
Restore default settings
•
x SD/SDHC/MMC card slot
Overview of the remote
control
a
a
b
b
c
c
d
d
e
e
f
f
g
g
h
h
i
i
j
j
k
k
l
l
m
m
n
n
o
o
p
p
q
q
r
r
s
s
t
t
u
u
English
EN 9
CEM250-55-IFU-ENG.indd 9CEM250-55-IFU-ENG.indd 9 2008-10-28 10:27:592008-10-28 10:27:59
a /
English
b
c
d MENU
e AUDIO
f 5/6/7/8/9/0+
g
h 1 ,
i SHUF, 4
j SEL
k
l
m SOURCE
n VOLUME +/-
o EQ
•
Tune for radio station
•
Skip/search for a track.
•
Mute or restore volume.
PWR
•
Turn the unit on or off.
•
Access system menu.
Access audio setting menu.
•
Select track or preset radio station.
•
Enter phone number.
•
•
Answer phone.
•
Dial number.
•
Start play from the beginning of the
fi rst track.
•
Pause or resume play.
•
Select preset station no. 1.
•
Enter phone number.
•
Set shuffl e play mode.
•
Select preset station no. 4.
•
Enter phone number.
•
Confi rm selection.
/
•
Tune for radio station
•
Skip/search for MP3/WMA track.
•
Return to previous menu.
•
Disable screen blackout.
•
Select audio source
•
Adjust volume.
Select EQ setting.
•
p DBB
Turn on or off Dynamic Bass Boost
•
(DBB) sound.
q SEARCH
Set radio station memory
•
automatically.
Search a track or folder.
•
r DISP
Display radio frequency, clock and
•
radio program type (if available).
Display MP3/WMA elapsed time, last
•
listened radio frequency, and clock.
s
•
Terminate call
t 3, REP
•
Set repeat play mode.
•
Select preset station no. 3
•
Enter phone number.
u INTRO, 2
•
Turn intro play on or off.
•
Select preset station no. 2
•
Enter phone number.
10 EN
CEM250-55-IFU-ENG.indd 10CEM250-55-IFU-ENG.indd 10 2008-10-28 10:28:012008-10-28 10:28:01
3 Get started
Caution
Use the controls only as stated in this user manual.•
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for
the model and serial number of your unit. The
model number and serial number are on the
bottom of your unit. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
When you connect other devices to this
•
unit, ensure that the rating of the car circuit
is higher than the total fuse value of all the
connected devices.
Notes on speaker connection
Never connect speaker wires to the metal
•
body or chassis of the car.
Never connect speaker wires with stripes
•
to one another.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
a In-car audio system
b Sleeve
c Front panel
d Standard connector
e Trim plate (2 pieces)
f Rubber cushion
g Disassembly tools
h Screws 4 pieces
English
Caution
This unit is designed for negative ground (earth) 12 V DC
•
operation only.
•
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
•
To avoid short-circuit: before you connect, ensure that
the ignition is off.
•
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
•
Ensure that all loose leads are insulated with electrical
tape.
•
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
•
Ensure that all ground (earth) leads are run to a common
ground (earth) point.
•
Use only the supplied mounting hardware for a safe and
secure installation.
•
Improper fuses can cause damage or fi re. When you
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
CEM250-55-IFU-ENG.indd 11CEM250-55-IFU-ENG.indd 11 2008-10-28 10:28:022008-10-28 10:28:02
ab
ab
e
dc
dc
fgh
fgh
e
EN 11
Loading...