Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
CEM2300BT
User manual
Contents
1 Safety 2
2 Your car audio system 3
Introduction 3
What's in the box 3
Overview of the system 4
3 Install the car audio system 7
Connect wires 7
Mount into the dashboard 8
Attach the front panel 9
4 Get started 10
For the rst time use 10
Set the time format 10
Set the clock 10
Turn on 11
Switch music listening zone 11
Mute the button beep 11
5 Listen to radio 11
Tune to a radio station 11
Store radio stations in memory 12
Tune to a preset station 12
10 Adjust sound 17
11 Adjust system settings 17
12 Others 18
Reset 18
Replace fuse 18
13 Product information 19
14 Troubleshooting 20
General 20
About the Bluetooth device 20
15 Notice 21
Compliance 21
Care of the environment 21
Trademark notice 22
Copyright 22
6 Play from hard media 12
Play a disc 12
Play from a USB storage device 12
7 Use Bluetooth devices 14
Connect a device 14
Play audio from a Bluetooth device 15
Make a call 15
8 Listen to an external player 16
9 Charge your USB device 16
1EN
1 Safety
Read and understand all instructions before
you use your apparatus. If damage is caused by
failure to follow instructions, the warranty does
not apply.
• This apparatus is designed for negative
ground (earth) 12 V DC operation only.
• To ensure safe driving, adjust the volume to
a safe and comfortable level.
• Improper fuses can cause damage or
re. When you need to change the fuse,
consult a professional.
• Use only the supplied mounting hardware
for a safe and secure installation.
• To avoid short circuit, do not expose the
apparatus to rain or water.
• Never insert objects into the ventilation
slots or other openings on the apparatus.
• Clean the apparatus and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.
• Never place any objects other than discs
into the apparatus.
• Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
Caution
Use of controls or adjustments or performance of
•
procedures other than herein may result in hazardous
laser exposure or other unsafe operation.
• The apparatus shall not be exposed to
dripping or splashing.
Versions: V4, V7, V8, V9 (L1 and L2)
Sampling frequencies: 44.1 kHz, 48 kHz
Bitrates: 64-192 kbps and variable
bitrates
• ID3 tag V2.0 or later
• Unsupported les:
What's in the box
Check and identify the contents of your
package:
abc
e
h
g
a Main unit (with a sleeve)
b Carrying case (with the front panel
included)
c Trim plate
d Disassembly tool x 2
e Rubber cushion
f Screw x 1
g ISO male connectors
h User manual
3EN
Overview of the system
abcdef
tsrqponmlkjighuv
w
a
• Unlock the front panel.
b
• Press to return to the previous menu.
• Press and hold to access the system
menu.
c
• For .wma and .mp3 tracks, press to
select the previous folder.
• In radio mode, press to select a tuner
band.
• Press and hold to activate the selection
of listening zones.
4EN
d Disc slot
e LCD screen
f
• Eject the disc from the disc
compartment.
g
• Connect to a USB storage device.
h AUDIO IN
• Connect to the audio output socket
(usually the headphone socket) of an
external device.
i
• Start, pause, or resume the play of
tracks.
• In radio mode, press to select the
preset radio station of No. 6.
• In radio mode, press and hold to store
the current radio station at channel
No. 6 .
j
• In radio mode, press to select the
preset radio station of No. 5.
• In radio mode, press and hold to store
the current radio station at channel
No. 5.
k
• In radio mode, press to select the
preset radio station of No. 4.
• In radio mode, press and hold to store
the current radio station at channel
No. 4.
• For .wma and .mp3 tracks, press
repeatedly to select a play mode: play
all tracks randomly ([SHU ALL]), play
tracks in the current folder randomly
([SHU FLD]), or play all tracks in the
storage device in sequence ([SHU OFF]).
l
• In radio mode, press to select the
preset radio station of No. 3.
• In radio mode, press and hold to store
the current radio station at channel
No. 3.
• For .wma and .mp3 tracks, press
repeatedly to select a repeat mode:
repeat the current track ([REP ONE]) ,
repeat all tracks in the current folder
([RPT FLD]), or repeat all tracks in the
storage device ([RPT ALL]).
m
• In radio mode, press to select the
preset radio station of No. 2.
• In radio mode, press and hold to store
the current radio station at channel
No. 2.
• For .wma and .mp3 tracks, press to
access the folder list.
n
• In radio mode, press to select the
preset radio station of No. 1.
• In radio mode, press and hold to store
the current radio station at channel
No. 1.
• For .wma and .mp3 tracks, press to
access the track list.
o
/DISP
• Press repeatedly to display available
information about the current track.
• Press repeatedly to display available
RDS information.
• Press and hold to display the set clock.
p AS/SOURCE
• Press repeatedly to select a source.
• In radio mode, press and hold to
activate the automatic search of radio
stations.
q
• For .wma and .mp3 tracks, press to
select the next folder.
• In radio mode, press to select a tuner
band.
• Press and hold to enable or disable
the DBB (dynamic bass boost) sound
effect.
r
• Press to turn on the system.
• Press and hold to turn off the system.
• Press to mute the speakers or release
them from mute status.
• Press to conrm an option.
• Rotate to switch between menu
options.
• Rotate to adjust the volume level.
s
• Press repeatedly to select a preset
sound equalizer.
• Press and hold to activate the setup of
bass, treble, balance, and fader.
5EN
t /
• Tune to a radio station.
• Press to skip to the previous or next
track.
• Press and hold to rewind a track or
search fast forward.
u
• Press to hang up an ongoing call.
• When there is an incoming call, press
to reject it.
• When it is not in a call, press to enable
or disable the MAX Sound feature.
v
• When there is an incoming call, press
to answer.
• When it is not in a call, press and hold
to redial the last called number.
• In a call, press and hold to transfer the
voice between the phone and the car
speakers.
w RESET
• Press to reset the system to factory
default settings.
6EN
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.