Philips CEM220X/78 User Manual
Register your product and get support at
Car Entertainment System
CEM220
EN User manual 3
Contents
1 Important 4
Safety 4
Notice 4
2 Your Car Audio System 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 10
Install the car audio 10
Install remote control battery 15
Turn on 15
Set clock 15
4 Listen to radio 16
Tune to a radio station 16
Store radio stations in memory 16
Tune to a preset station 16
5 Play audio fi les 17
Play a disc 17
Play from USB/SD/MMC device 17
Control play 18
Search for an MP3/WMA track 18
View play information 18
Intro play 18
Shuffl e play 19
Repeat play 19
Connect external sound source 19
7 Adjust system settings 21
Select blackout setting 21
Turn demo mode on/off 21
Change button backlight color 21
Select start volume 21
Turn beep sound on/off 22
Turn display scroll on/off 22
Select shock-protect setting 22
Reset 22
8 Additional information 23
Detach the front panel 23
Replace fuse 23
Remove the unit 23
9 Product information 24
10 Troubleshooting 26
11 Glossary 27
English
6 Adjust sound 20
Adjust volume 20
Mute 20
Turn Dynamic Bass Boost (DBB) on/off 20
Select preset equalizer 20
Other sound settings 20
EN
3
1 Important
English
Safety
•
Read and understand all instructions
before you use your unit. If damage is
caused by failure to follow instructions, the
warranty does not apply.
•
This unit is designed for negative ground
(earth) 12 V DC operation only.
•
To ensure safe driving, adjust the volume to
a safe and comfortable level.
•
Improper fuses can cause damage or
fi re. When you need to change the fuse,
consult a professional.
•
Use only the supplied mounting hardware
for a safe and secure installation.
•
To avoid short circuit, do not expose the
unit, remote control or remote control
batteries to rain or water.
•
Never insert objects into the ventilation
slots or other openings on the unit.
•
Clean the unit and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the unit.
•
Never place any objects other than discs
into the unit.
•
Never use solvents such as benzene,
thinner, cleaners available commercially, or
anti-static sprays intended for discs.
•
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the unit screen! Never
•
touch, push, rub or strike the screen with
any object.
Caution
Use of controls or adjustments or performance of
•
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Notice
The making of unauthorized copies of copyprotected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
This unit includes these labels:
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
4 EN
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
Any changes or modifi cations made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2008 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifi cations are subject to change without
notice. Trademarks are the proper ty of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
English
EN 5
2 Your Car Audio
English
System
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers, register your product
at www.Philips.com/welcome.
Introduction
With the in-car audio system, you can enjoy
your drive while you listen to:
•
FM or AM (MW) radio
•
Audio from CD or MP3 disc
•
Audio from a USB drive
•
Audio from a SD/MMC card
•
Audio from external devices
What’s in the box
Check and identify the contents of your
package:
a In-car audio system
b Remote control
c Rubber cushion
d Screw (4 pieces)
e Disassembly tool ( 2 pieces)
f Front panel
g Trim plate (2 pieces)
h Carrying case for front panel
i User manual
j Quick Start Guide
k ISO connector
b
a
a
dce
dce
fh
fh
ij
ij
g
g
b
k
k
6 EN
Overview of the main unit
a
a
x
x
b
b
s
s
w
w
d
d
v
v
ecf
ecf
r q po nml kj
r q po nml kj
u
u
g
g
t
t
h
h
i
i
English
a
•
Select tuner band.
•
Select MP3/WMA folder.
•
Scroll up or down menu.
b DBB
Turn on or off Dynamic Bass Boost
•
(DBB) sound.
c SOURCE
Select audio source.
•
d
/ MUTE
•
Turn the unit on or off.
•
Adjust volume.
•
Confi rm selection.
•
Enter characters for search.
•
Mute or unmute the volume.
e MENU / DISP
•
Display radio frequency, clock and
radio program type (if available).
•
Display track, elapsed time, artist,
album, title, folder, fi le and clock.
•
Access system menu.
f
•
Return to previous menu.
•
Stop search.
•
Disable screen blackout.
g Display panel
EN 7
h
•
English
i USB socket
j External equipment socket
k 6
l 5
m SHUF, 4
n 3, REP
o INTRO, 2
p 1 ,
q
r EQ/Audio
s SEARCH
t Panel power connection
u Disc slot
v
w RESET
x SD/MMC card slot
Unlock the panel
Select preset station no. 6
•
Select preset station no. 5
•
Activate or deactivate shuffl e mode.
•
Select preset station no. 4
•
Set repeat play mode.
•
Select preset station no. 3
•
Turn intro play on or off.
•
Select preset station no. 2
•
•
Start play
•
Pause or resume play.
•
Select preset station no. 1
/
•
Tune for radio station
•
Skip/search for a track.
•
Select equalizer (EQ) setting.
•
Access audio setting menu.
•
Store radio stations automatically.
Search a track or folder.
•
Take disc out.
•
Restore default settings
•
Overview of the remote
control
q
q
p
p
o
o
n
n
m
m
l
l
k
k
j
j
a SOURCE
•
Select audio source.
b VOLUME +/-
•
Adjust volume.
c EQ
•
Select EQ setting.
d DBB
•
Turn on or off Dynamic Bass Boost
(DBB) sound.
e 3, REP
•
Select repeat play mode.
•
Select preset station no. 3.
f SEARCH
•
Store radio stations automatically.
•
Search a track or folder.
g DISP
•
Display radio frequency and clock.
a
a
b
b
c
c
d
d
e
e
f
f
g
g
h
h
i
i
8 EN
•
Display track, elapsed time, artist,
album, title, folder, fi le and clock.
h 6
Select preset station no. 6.
•
i 5
Select preset station no. 5.
•
j SHUF, 4
Activate or deactivate shuffl e mode .
•
Select preset station no. 4.
•
k 1 ,
•
Start play.
•
Pause or resume play.
•
Select preset station no. 1.
l INTRO, 2
•
Turn intro play on or off.
•
Select preset station no. 2.
m AUDIO
•
Access audio setting menu.
n Navigation buttons
•
-
/
Tune for radio station
Skip/search for MP3/WMA track.
•
-
/
Select tuner band.
Select MP3/WMA folder.
•
- SEL
Confi rm selection.
o MENU
Access system menu.
•
p
PWR ,
•
Turn the unit on or off.
•
Mute or unmute volume.
q
•
Return to previous menu.
•
Disable screen blackout.
English
EN 9
3 Get started
English
Caution
Use the controls only as stated in this user manual.•
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for
the model and serial number of your unit. The
model number and serial number are on the
bottom of your unit. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
•
When you connect other devices to this
unit, ensure that the rating of the car circuit
is higher than the total fuse value of all the
connected devices.
Notes on speaker connection
Never connect speaker wires to the metal
•
body or chassis of the car.
•
Never connect speaker wires with stripes
to one another.
Overview of parts
These are the supplied parts needed to
connect and install this unit.
a In-car audio system
b Sleeve
c Front panel
d Trim plate
e Rubber cushion
f Disassembly tools
g Screws 4 pieces
ISO connector
h
Caution
This unit is designed for negative ground (earth) 12 V DC
•
operation only.
•
Always install this unit in the car dashboard. Other
locations can be dangerous as the rear of the unit heats
up during use.
•
To avoid short-circuit: before you connect, ensure that
the ignition is off.
•
Ensure that you connect the yellow and red power
supply leads after all other leads are connected.
•
Ensure that all loose leads are insulated with electrical
tape.
•
Ensure that the leads do not get caught under screws
orin parts that will move (e.g. seat rail).
•
Ensure that all ground (earth) leads are run to a common
ground (earth) point.
•
Use only the supplied mounting hardware for a safe and
secure installation.
•
Improper fuses can cause damage or fi re. When you
need to change the fuse, consult a professional.
Note on the power supply lead (yellow)
10 EN
ab
ab
c
c
efgh
efgh
d
d
Loading...