Philips CEM-200 Owners Manual
Register your product and get support at
www.philips.com/welcome
CEM200
EN User manual
Contents
1 Important 4
Safety 4
Notice 4
2 Your car audio system 6
Introduction 6
What’s in the box 6
Overview of the main unit 7
Overview of the remote control 8
3 Get started 9
Install the car audio 9
Install remote control battery 13
Turn on 14
Set clock 14
4 Listen to radio 14
Tune to a radio station 14
Store radio stations in memory 15
Tune to a preset station 15
Play with RDS 15
5 Play audio files 17
Play a disc 17
Control play 17
Search for an MP3/WMA track 17
View play information 17
Intro play 18
Shuffle play 18
Repeat play 18
Connect external sound source 18
7 Adjust system settings 19
Select blackout setting 19
Turn demo mode on/off 19
Select start volume 19
Turn beep sound on/off 20
Turn display scroll on/off 20
Select shock-protect setting 20
Reset 21
8 Additional information 21
Detach the front panel 21
Replace fuse
Remove the unit 22
21
9 Product information 22
10 Troubleshooting 23
11 Glossary 24
English
6 Adjust sound 18
Adjust volume 18
Mute 18
Turn Dynamic Bass Boost (DBB) on/off 18
Select preset equalizer 18
Other sound settings 19
EN
3
1 Important
Notice
Safety
Read and understand all instructions •
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This apparatus is designed for negative •
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume •
to a safe and comfortable level.
Improper fuses can cause damage or •
fire. When you need to change the fuse,
consult a professional.
Use only the supplied mounting hardware •
for a safe and secure installation.
To avoid short circuit, do not expose the •
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation •
slots or other openings on the apparatus.
Clean the apparatus and frame with a •
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
Never place any objects other than discs •
into the apparatus.
Never use solvents such as benzene, •
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when •
open. Avoid exposure to beam.
Risk of damage to the apparatus screen! •
Never touch, push, rub or strike the
screen with any object.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
This apparatus includes these labels:
Class II equipment symbol
This symbol indicates that the apparatus has a
double insulation system.
Caution
Use of controls or adjustments or •
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
EN
4
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2009 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
English
This product complies with the radio
inter ference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC.
EN
5
2 Your car audio
system
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
a
a
b
b
dec
dec
Introduction
With the in-car audio system, you can enjoy
your drive while you listen to:
FM or AM (MW) radio•
Audio from CD or MP3 disc•
Audio from external devices•
What’s in the box
Check and identify the contents of your
package:
a In-car audio system
b Remote control
c Rubber cushion
d Screw (4 pieces)
e Disassembly tool ( 2 pieces)
f Front panel
g Trim plate
h Carrying case for front panel
i User manual
j Quick start guide
k Standard connector
g
g
ij
ij
hf
hf
k
k
6
EN
Overview of the main unit
English
a
Select tuner band. •
Select MP3/WMA folder.•
Scroll up or down menu.•
b DBB
Turn on or off Dynamic Bass Boost •
(DBB) sound.
c SOURCE
Select audio source.•
d
/MUTE
Turn the unit on or off.•
Adjust volume.•
Confirm selection.•
Enter characters for search.•
Mute or restore volume.•
e MENU / DISP
Display radio frequency, clock and •
radio program type (if available).
Display track, elapsed time, artist, •
album, title, folder, file and clock.
Access system menu.•
f
Return to previous menu.•
Stop search.•
Disable screen blackout.•
g Display panel
h
Unlock the panel•
i External device socket
EN
7
j 6
Select preset station no. 6•
k 5
Select preset station no. 5•
l SHUF, 4
Activate or deactivate shuffle mode.•
Select preset station no. 4•
m 3, REP
Set repeat play mode.•
Select preset station no. 3•
n INTRO, 2
Turn intro play on or off.•
Select preset station no. 2•
o 1,
Star t play•
Pause or resume play.•
Select preset station no. 1•
p
/
Tune to a radio station•
Skip/search for a track.•
q EQ/Audio
Select equalizer (EQ) setting.•
Access audio setting menu.•
r SEARCH
Store radio stations automatically.•
Search a track or folder. •
s Panel power connection
t Disc slot
u
Take d isc o u t .•
v RESET
Restore default settings.•
Overview of the remote control
q
q
p
o
o
n
n
m
m
l
l
k
k
j
j
a SOURCE
Select audio source.•
b VOLUME +/-
Adjust volume.•
c EQ
Select EQ setting.•
d DBB
Turn on or off Dynamic Bass Boost •
(DBB) sound.
e 3, REP
Select repeat play mode.•
Select preset station no. 3.•
f SEARCH
Store radio stations automatically.•
Search a track or folder.•
a
a
b
b
c
c
d
d
e
e
f
f
g
g
h
h
i
i
8
EN
g DISP
Display radio frequency and clock.•
Display track, elapsed time, artist, •
album, title, folder, file and clock.
h 6
Select preset station no. 6.•
i 5
Select preset station no. 5.•
j SHUF, 4
Activate or deactivate shuffle mode.•
Select preset station no. 4.•
k 1,
Star t play.•
Pause or resume play.•
Select preset station no. 1.•
l INTRO, 2
Turn intro play on or off.•
Select preset station no. 2.•
m AUDIO
Access audio setting menu.•
n Navigation buttons
•
/
Tune for radio station
Skip/search for MP3/WMA track.
•
/
Select tuner band.
Select MP3/WMA folder.
• SEL
Confirm selection.
o MENU
Access system menu.•
p
PWR,
Turn the unit on or off.•
Mute or restore volume.•
q
Return to previous menu.•
Disable screen blackout. •
3 Get started
Caution
Use the controls only as stated in this user •
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
This unit is designed for negative ground •
(earth) 12 V DC operation only.
Always install this unit in the car dashboard.
•
Other locations can be dangerous as the rear
of the unit heats up during use.
To avoid short-circuit: before you connect,
•
ensure that the ignition is off.
Ensure that you connect the yellow and red
•
power supply leads af ter all other leads are
connected.
Ensure that all loose leads are insulated with
•
electrical tape.
Ensure that the leads do not get caught under
•
screws orin par ts that will move (e.g. seat rail).
Ensure that all ground (ear th) leads are run to
•
a common ground (earth) point .
Use only the supplied mounting hardware for a
•
safe and secure installation.
Improper fuses can cause damage or fire.
•
When you need to change the fuse, consult a
professional.
English
EN
9
Loading...