Register your product and get support at
www.philips.com/welcome
CED1700
EN Quick Start Guide
1
a
b
1
2
5
3
4
R-CH
6
R-CH
7
L-CH
"
8
9
0
/
!
§
&
$%
P
R
N
D
2
L
L-CH
b
2
a
5mm
183 mm
53mm
2
c
3
4
English
8 Purple and
purple/black
wires
Right speaker (Rear)
Install the car audio
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Connect wires
1
1 Check the car’s wiring carefully, then
connect them to the supplied ISO wires.
Connector Connect to
1 Yellow w i r e The +12V car battery which
2 Blue wire The electric antenna control
3 Black wire A metal surface of the car
4 Red wire The +12V power terminal
5 Green and
green/black
wires
6 White and
white/black
wires
7 Gray and
gray/black
wires
is live at all times .
lead or power supply lead of
the antenna booster
If there is no electric antenna
or antenna booster, or it is
manually operated telescopic
antenna, it is not necessar y
to connect this lead.
First connect the black
ground (earth) lead, then
connect the yellow and red
power supply leads.
which is live in the
accessory (ACC) position of
the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be sure
to connect the black ground
(earth) lead to a metal
surface of the car fi rst.
Left speaker (Rear)
Left speaker (Front)
Right speaker (Front)
2 Connect the other end of the supplied
standard connector to the car audio
system.
1 Pink wire Extension wire
2 2.5m extension
a
3 Brake switch
4 Ground
5 ISO wires Connected in step 1
6 Grey wire Rear line out Left/
7 Black wire Front line out Lef t/
8 Blue cable Subwoofer
9 Red cable Aux Right
10 White cable Aux Left
11 Yel l o w c a b l e Video in
12 Ye l l ow cabl e Camera in
13 Yellow c able Video out 1
14 Yellow c able Video out 2
15 Purple wire Reverse camera (B+)
16 Gearbox switch
17 Reverse gear
Mount in the dashboard
b
Connector/
Obeject
wire(Not
included)
signal
Connect to/with
Parking brake (-)
above.
Right
Right
Back lamp lead +
2
1 If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
2 Ensure that car dashboard opening is within
these measurements:
a
3 Slide the unit into the dashboard until a
b
click sound is heard.
4 Attach the trim plate.
c
5 Reconnect the negative terminal of the car
battery.
Turn on
1 Press to turn on the unit.
2 Touch a language to select.
• To adjust screen brightness, press DIMMER
on the remote control, then press
To turn off the unit, press and hold •
seconds.
Set date and time
Touch to display main menu.
1
Radio
Sun
Sep 27, 2009
Bluetooth AV_IN1 Navigation Settings
CHDScsiD USB
or .
for 3
Set Time
1 Touch [Set time] .
2 Touch hour/minute digit to highlight the digit.
3 Touch / to set hour/minute.
Set time format
1 Touch [Clock Mode] repeatedly to toggle
between [12Hr] and [24Hr] options.
Listen to Radio
Touch to display home menu.
1
2 Touch [Radio] .
3 Touch on FM or AM repeatedly on the left
of the screen to select band:
4 Briefl y touch or to tune to a radio
station by step.
Touch •
tune to a radio station automatically.
or for over 1 seconds to
2 Touch [Settings] .
3 Touch to access 2nd page.
4 Touch [Date] .
Touch year digit to highlight this digit.
5
6 Touch / to set year.
7 Repeat step 5 and 6 to set month and day.
Play disc
You can play video, audio or images stored on the
following discs:
DVD video, DVD-R, DVD-RW•
VCD•
Audio CD, CD-R, CD-RW •
1 Inser t the disc into the disc slot with label
side facing up.
Countries where you
bought the unit
China
3
Supported DVD
region code
Asia Pacifi c, Taiwan,
Korea
Latin America
Russia, India
Receive call
By default, all incoming calls are received
automatically.
1 If there is incoming call, [Incoming call...]
fl ashes on the screen. Speak into the
Bluetooth microphone.
2 When conversation ends, tap (red) to
terminate the call.
Play USB device
Note
•
Ensure that the device contains playable
content.
4
1 Open the lid of USB socket.
2 Inser t the USB to the USB socket.
Play with Bluetooth device
Pair the Bluetooth-enabled devices
1 Turn on the Bluetooth function on your
device.
2 Search for other Bluetooth device with
your device.
3 Select “CED1700” in the pairing list.
4 Enter default password “0000”.
Make a call
1 Touch on top of the screen.
2 Touch number icons directly to input
phone number.
3 After the phone number entered, touch
.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: CED1700_00_QSG_V3.0
Loading...