Philips CDR951 User Manual

Audio CD Recorder

CDR950/951

•

Instructions for use

•

Mode d'emploi

•

Instrucciones de manejo

•

Bedienungsanleitung

•

Instructions for use

•

Mode d'emploi

•

Instrucciones de manejo

•

Bedienungsanleitung

•

Gebruiksaanwijzing

•

Istruzioni per l'uso

•

Brugsanvisning

•

Bruksanvisning

•

Gebruiksaanwijzing

•

Istruzioni per l'uso

•

Brugsanvisning

•

Bruksanvisning

Käyttöohje

•

Manual de utilização

•

•

Käyttöohje

•

Manual de utilização

•

•

O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜

Instrukcja obs¬ugi

•

English

8

1 ON/OFF ........................turns the CD recorder ON and OFF

2 Standby indicator

3 DISPLAY......................selects display information/text

4 SCROLL........................activates scrolling of text over the

display (once)

5 PROGRAM ..................opens/closes program memory

6 REPEAT........................repeats play (all, program or track)

7 SHUFFLE......................plays CD(RW) or program in

random order

8 Disc tray

9 Display..........................information screen

0 ERASE..........................selects erasing mode

! FINALIZE ....................selects finalize mode

@ SOURCE ......................selects input source

# PLAY/PAUSE 2; ......starts play/interrupts play or

recording

$ STOP 9........................stops/clears a program

% ¡ EASY JOG ™ ........- previous/next track (Play and

(rotate) Program mode)

- recording level control (recording)

- selects settings (menu on)

ENTER (push) ..............- plays selected tracks

- selects settings in Menu mode

- programs track numbers

^ STORE/MENU ............- enters Menu mode

- stores Menu settings

& CANCEL/DELETE ......- deletes tracks from a program

- deletes text in Menu mode

- returns to a higher level in the
menu

* R ............................- searches forward

- cursor control in Menu/Prog.
review mode

( Q ............................- searches backward

- cursor control in Menu/Prog.
review mode

) OPEN/CLOSE /..........opens/closes disc tray

¡ RECORD ......................starts recording, finalising, erasing

™ REC(ord) TYPE ............selects recording modes

£ LEVEL ..........................headphone volume control

≤ PHONES......................socket for headphones

∞ LEVEL (MIC)................microphone/mix level controller

§ MIC ..............................socket for (stereo) microphone

Note: Unless stated otherwise, all controls are on the front of

the CD recorder. When provided on the remote control,
you can also use the corresponding buttons, after
selecting the CD recorder or separate CD player by
pressing CDR or CD.

1 ANALOG IN ................connects to the line output of an

amplifier (left and right)

2 ANALOG OUT ............connects to the line input of an

amplifier (left and right)

3 DIGITAL IN 1 ..............connects to the digital coaxial

output of an external CD player

4 DIGITAL OUT..............connects to the digital coaxial

input of e.g. amplifier or recording
device

5 DIGITAL IN 2 ..............connects to the digital coaxial

output of an extra CD player

6 OPTICAL IN ................connects to the digital optical

output of an external CD player

7 OPTICAL OUT ............connects to the digital optical

input of e.g. amplifier or recording
device

8 Connection to mains

Connections at the back

Controls on the front

CONTROLS AND CONNECTIONS

RECORD

MAINS

OPTICAL

IN OUT

DIGITAL

IN1 IN2OUT

ANALOG

L

R

L

R

IN

OUT

876

5

4321

13 1514 16

17181920212223242526

4 5 6 7 8 9 10 11 123

1

2

English

11

For recording the following inputs are present:

- Digital optical input.

- Digital coaxial input 1.

- Digital coaxial input 2.

- Analog input.

For playback the following outputs are present:

- Digital coaxial output.

- Digital optical output.

- Analog output.
We advise you to connect these to the CD input on your
amplifier.

The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.

Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
(The digital optical connection is less sensitive to external
disturbances).
If your equipment does not offer digital connections, the high
quality Analog-Digital-Convertor of your CD recorder will
ensure very good audio performance when recordings are
made from the analog input.

Playback via the digital coaxial output of the CD recorder
gives the best audio performance.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Convertor of the CD recorder ensures a
very good sound quality via the analog output.

We advise you to always establish both digital and analog
connections. In this way you can always make analog
recordings when digital recording is not possible.

We have described the most common ways of connecting the
CD recorder. If you still have difficulties with the connections
you can always contact the Philips Consumer Service desk in
your country.

Analog connection is required for playback of CDs (use cable

2) and for recording from external analog sources
(use cable 1).

Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.

1 For recording, connect cable 1 between the ANALOG IN-

sockets on the CD recorder and the CDR LINE- or TAPE OUT­sockets of an amplifier.

Note: For recording directly from a CD player, the ANALOG IN

sockets of the CD recorder should be connected to the
analog output of the CD player.

2 For playback, connect cable 2 between the ANALOG OUT-

sockets on the CD recorder and the input sockets of an
amplifier e.g. TAPE IN, CDR or AUX.

Note: Never use the PHONO input.

OPTICAL

IN OUT

DIGITAL

IN1 IN2OUT

ANALOG

L

R

L

R

IN

OUT

CD RECORDER

RECEIVER

TAPE

L

R

L

R

IN

OUT

1

2

Analog connectionsConnections general

INSTALLATION

English

12

Digital coaxial connection is only required in case you wish to
record from a CD player with a digital coaxial output.

Use the digital coaxial cable supplied.

1 For recording, connect the cable 3 between the DIGITAL

IN-1 socket on the CD recorder and the DIGITAL OUT-socket
of a CD player.

•If required you can connect an extra digital device (e.g.a
DAT or DCC recorder) to the DIGITAL IN 2 socket of the
recorder.

Note: Your CD recorder is equipped with a digital coaxial

output (DIGITAL OUT). This output can be used for
digital playback.

Digital optical connection is only required in case you wish to
record from a CD player with a digital optical output.

When connecting the Digital
Optical cable, make sure it
is fully inserted until
there is a click.

1 Remove the dust caps from the digital optical connection.

(We recommend you save the cap).

2 For recording, connect a fibre-optic cable 4 between the

digital OPTICAL IN socket of the CD recorder and the
digital-optical output of a CD player.

Note: Your CD recorder is equipped with a digital OPTICAL

output. This output can be used for digital playback.

CD PLAYER

OPTICAL

OUT

DIGITAL

OUT

ANALOG

L

R

OUT

MAINS

MAINS

OPTICAL

IN OUT

DIGITAL

IN1 IN2OUT

ANALOG

L

R

IN

OUT

CD RECORDER

RECEIVER

L

R

L

R

IN

OUT

TAPE

MAINS

4

Digital optical connections

Digital coaxial connections

INSTALLATION

RECEIVER

L

L

R

R

IN

OUT

TAPE

CD RECORDER

ANALOG

IN

OUT

L

L

DIGITAL

R

IN1 IN2OUT

R

OPTICAL

IN OUT

CD PLAYER

3

L

R

OUT

ANALOG

OUT

DIGITAL

English

13

1 Plug the power cord supplied into the MAINS connector on

the CD recorder, then into a mains socket.

2 Press ON/OFF.

➜ The recorder is now in Standby mode.

3 Press any key to activate the recorder.

Note:

- The CD recorder will automatically adjust to the local mains
voltage.

- When the CD recorder is in the Standby mode, it is still
consuming some power. If you wish to disconnect your
recorder completely from the mains, press ON/OFF on the
recorder front.

- Place the CD recorder on a solid, vibration free surface.

- Do not place the CD recorder near a source of heat or in
direct sunlight.

- Do not use the CD recorder under extremely damp
conditions.

- If the CD recorder is placed in a cabinet, make sure that a

2.5 cm space remains free on all sides of the CD
recorder/player for proper ventilation.

1 Open the battery compartment cover.

2 Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as

shown.

3 Replace the cover.

Note: We recommend you use 2 batteries of the same type

and condition.

Batteries contain chemical substances, so they should
be disposed of properly.

Inserting batteries in the remote control

Setup recommendations

Power supply

INSTALLATION