Philips CDR600BK Quick start guide
Philips Audio CD Recorder CDR 600:Getting started…
English
IN
OUT
L
R
CDR/TAPE
AMPLIFIER/
RECEIVER
DIGITAL
COAXIAL
SOURCE
(CD player, DVD, DAT)
IN
L
R
ANALOG
CD RECORDER
OUT
L
R
PHONO
RECORD PLAYER
OUT
L
R
ANALOG
IN
L
R
PHONO
DIGITAL
IN
OUT
IN
OUT
OPTICAL
IN
ANALOG
L
R
L
R
C
D
R
OUT
DIGITAL
IN
General information
This Quick Installation Card gives a rough overview
and helps to quickly start with basic steps. Please
read the supplied instruction manual for detailed
information.
Mains
1 Check whether the mains voltage as shown on the type
plate corresponds to your local mains voltage. If it does
not consult your dealer or service or ganization.
2 After all connections have been made connect the
mains cable to AC MAINS~ and to the wall socket.This
switches on the mains supply.
To disconnect the set from the mains completely,
remove the mains plug fr om the wall socket.
Discs for recording
Use discs with the “Digital Audio”logo only:
– CD-Audio Recordable (CDR) discs,or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as recording
would not work properly.
Discs for playback
ReWritable
playback standard CDRW Philips
in: CD player compatible CDR 600
disc: CD player
finalized CDR
●● ●
finalized CDRW ●●
unfinalized CDR
●
or CDRW
xp QRC CDR 600/17 English 15-03-2001 14:53 Pagina 1
Philips Audio CD Recorder CDR 600:Getting started…
English
3103 306 17881 Printed in Hungary CMM/JS/0111
Recording an entire CD
OPEN/CLOSE
PLAY/PAUSE
OPEN/CLOSE
1 Press OPEN/CLOSE /.
Insert a CD into the CD recorder tray.
3 Press PLAY/PAUSE 2/;
to start playback.
OPEN/CLOSE
2
SOURCE
RECORDIN
TYPE
OPEN/CLOSE
OPEN/CLOSE
OPEN/CLOSE
O P
SOURCE
RECORDIN
TYPE
2x
2
Recording a single track
Playing a CD
Finalizing manually
OPEN/CLOSE
FINALIZE
CORDING
RECO
1 Insert the CDR(W)
to be finalized into
the CD recorder.
2 Press
FINALIZE
.
3 Press RECORD
to start the finalization.
1 Insert a blank Audio
CDR(W) into the
CD recorder tray.
3 Press SOURCE
to select the
correct input
connection.
4 Press TYPE
twice.
5 Select the
track on the
external CD
player.
2 Insert a CD into
the tray of the
external CD
player.
2 Insert the CD to be
copied into the tray of
the external CD player.
1 Insert a blank Audio
CDR(W) into the CD
recorder tray.
6 Press PLAY on
external CD
player to start
recording.
3 Press SOURCE
to select the
correct input
connection.
4 Press TYPE
once.
5 Press PLAY on
external CD
player to start
recording.
2 Press
OPEN/CLOSE /
to close the tray.
xp QRC CDR 600/17 English 15-03-2001 14:53 Pagina 2
Loading...