Philips CD4454Q-37 User Manual

Page 1
Welcome

Quick start guide

Connect
1
Install
2
Enjoy
3
philips
Page 2

What’s in the box

CD440 Base station
OR
CD440/CD445 Handset
CD445 Base Station
Power supply unit for base
station
-
+
+
-
Line cord
2 x AAA Rechargeable
Quick start guide
batteries
CD445
CD440 or CD445
Guarantee
Belt clip
User manual
The line adaptor may not be attached to the line cord.You may find the line adaptor in the box. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multi-handset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.
Warning Always use the cables and batteries that are supplied with your phone.
Page 3
1
Connect

Connect the base station

1. Insert the plug of the power cord into the socket under the base station.
2. Insert the plug of the line cord into the socket under the base station.
3. Connect the other end of the line cord together with the line adaptor if necessary, to the telephone line socket and the other end of the power cable to the electricity socket.
2

Install

Insert rechargeable batteries and charge

Insert batteries

Charge handset for 24 hours

Page 4

Set the time

1. Press to access the main menu
2. Press
3. Press to select SET CLOCK
4. Press and enter the current date (DD/MM/YY)
5. Press and enter the current time (HH:MM) in 12 hour format
6. Press to save the settings
/ to select CLOCK & ALARM

Enjoy

3

Make a call

Press and dial the number OR Dial the number and press or

Answer a call

When the phone rings, press or .
End a call
Press

Set the alarm

1. Press to access the main menu
2. Press
3. Press and
4. Press and /
5. Press to save the settings

Rename your handset

1. Press to access the main menu
2. Press
3. Press and
4. Press to enter the handset name
5. Press to save the settings
/ to select CLOCK & ALARM
/ to select ALARM
to select OFF, ON ONCE,orON DAILY
/ to select PERSONAL SET
to select HANDSET NAME
/
3111 285 34381
Page 5

Set the earpiece volume

During a call: Press / to select the eapiece volume from level one to level five

Set the ring melody

1. Press to access the main menu
2. Press / to select PERSONAL SET
3. Press to select HANDSET TONE
4. Press and / to select RING MELODY
5. Press and / to scroll to your desired ring melody
6. Press to save the settings

Store a number in the phonebook

1. Press to access the main menu
2. Press / to select PHONEBOOK
3. Press and / to scroll to NEW ENTRY
4. Press to enter the name (maximum 12 characters)
5. Press to enter the number (maximum 24 digits)
6. Press to choose a group (<No Group>, <Group A>, <Group B>, <Group C>)
7. Press to save the entry

Access the phonebook

1. Press to access the phonebook
2. Press / to select your desired phonebook entry
3. Press to view the details of your selected phonebook entry

Listen to new messages recorded on answering machine (applicable to CD445 only)

1. Press on the base station to turn on the answering machine
2. Press on the base station, playback of the oldest new message will begin.
3. Press to skip the current message and play the next message
4. Press to go back to previous message if it is pressed within one second of current message playback
5. Press to replay current message if it is pressed after one second of current message playback
6. Press to increase or to decrease speaker volume during message playback
7. Press to delete the current message
See CD445 user manual for details about the answering machine function.
Page 6

Troubleshooting

For more information, see the user manual that came with your CD440 or CD445.
Problem
No dialing tone
Poor audio quality
The is blinking
The handset LCD displays nothing
Caller Line Identification (CLI) service does not work
Solution
Charge the batteries for at least 24 hours
Move closer to the base station
Use the line cable provided in the box
Move closer to the base station
Move the base station at least one metre away from any electrical appliances
Register the handset to the base station
Move closer to the base station
Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset
Make sure the two supplied rechargeable batteries have been inserted into the battery compartment
Make sure the supplied batteries are charged up
Check your subscription with your network operator

Need help?

User Manual
See the User Manual that came with your CD440 or CD445.
Online help
www.philips.com/support
Loading...