Philips CD2301B, CD2303S, CD2302S, CD2301S User Manual

User manual

Charge the handset(s) for 24 hours before use !
EN
Welcome mode
Before using your CD 230, you need to configure it according to the country of use. Install the batteries (see page 8). After a few minutes of charge, the Welcome screen appears and displays an animated welcome message in different languages.
1. Press any key on the handset to stop the animation.
2. Press UP / DOWN to browse through the different countries and select your desired country.
3. Press softkey OK to confirm the country that suits you. After a short time you will hear a confirmation tone.
Then your phone is ready to be used.
If you need to re-configurate your CD 230, see page 26.
Note : If BACK is pressed, the handset will show the country selection screen again.
WARNING ! Only the handset language will be updated if there is no link with a base.
EN
Welcome mode
Before using your CD 230, you need to configure it according to the country of use. Install the batteries (see page 8). After a few minutes of charge, the Welcome screen appears and displays an animated welcome message in different languages.
1. Press any key on the handset to stop the animation.
2. Press UP / DOWN to browse through the different countries and select your desired country.
3. Press softkey OK to confirm the country that suits you. After a short time you will hear a confirmation tone.
Then your phone is ready to be used.
If you need to re-configurate your CD 230, see page 26.
Note : If BACK is pressed, the handset will show the country selection screen again.
WARNING ! Only the handset language will be updated if there is no link with a base.

Contents

Welcome mode ........................................................................ 2
Contents .................................................................................... 3
Important information ............................................................. 4
What’s in the box ...................................................................... 5
Handset and base station ......................................................... 6
Icons on the handset display .................................................... 7
Installing your phone ................................................................ 8
Battery life and range ............................................................................. 9
Using GAP standard compliance ............................................ 9
Using the menus ..................................................................... 10
Registering your handset ....................................................... 10
Menu structure ........................................................................ 11
Standby mode ......................................................................... 12
Text or number entry ............................................................ 12
Call ........................................................................................... 13
Phonebook ............................................................................... 16
Call log ..................................................................................... 18
Redial list .................................................................................. 19
Clock and alarm settings ........................................................ 20
Personalizing your phone ....................................................... 21
Giving your phone a name ..................................................................22
Setting your phone’s language ............................................................ 22
Turning the backlight on/off ...............................................................22
Auto answer ........................................................................................... 22
Selecting your handset’s ringing melody ..........................................22
Selecting your handset’s ringing volume ..........................................23
Turning the key beep on/off ...............................................................23
Advanced features .................................................................. 24
Recall time ..............................................................................................24
Dial mode ............................................................................................... 24
Area code ...............................................................................................24
Baby call ...................................................................................................24
Registering a handset ........................................................................... 25
Selecting a base ...................................................................................... 25
Un-registering a handset ..................................................................... 26
Changing the Base PIN ........................................................................ 26
Resetting .................................................................................................. 26
Selecting country ................................................................................... 26
Additional features ................................................................. 27
Lock keypad ............................................................................................ 27
Shortcut for turning handset ringer on/off ..................................... 27
Message waiting indication ..................................................................27
Paging ....................................................................................................... 27
Caller ID first ring suppression .......................................................... 27
Using the intercom ................................................................. 28
Calling someone in the house ............................................................ 28
Preparatory Intercom Dialling ........................................................... 28
Calling someone in the house while you are
talking on the phone ............................................................................. 28
Transferring your call to another handset ......................................29
Making a 3-way conference call ......................................................... 29
Default settings ....................................................................... 30
Troubleshooting ...................................................................... 31
Information .............................................................................. 32
Safety information ................................................................................. 32
Conformity .............................................................................................32
Environmental care ...............................................................................32
EN
3
EN

Important information

For your safety

Before installing your CD 230, carefully read the following information.

Power requirements

The product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT
>
installations defined in standard EN60-950. In case of power failure, the communication can be lost.
Warning ! The electrical network is classified as hazardous according to criteria in the standard EN 60950. The only way to power down this product is to unplug the power supply unit from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Telephone connection

Always use the line cable provided with the product otherwise you may not have a dialling tone.
>
If you have a broadband DSL Internet connection, please make sure you have one DSL filter plugged
>
directly on each line socket used in the house and check the modem and the phone are plugged in the correct filter slot (one specific for each).

Need help?

For more information on troubleshooting and FAQ’s:
Online help: www.p4c.philips.com
Troubleshooting : see page 31
4

What’s in the box

2 AAA Batteries
EN
Handset CD 230
230
User manual Quick Start Guide
A power supply unit
*Note : You may find in the box the line adaptor delivered separately from the line cord. In this case, please plug first this line adaptor onto the line cord before connecting it to the line socket.
Battery door
Base station CD 230
Guarantee
A line cord*
Note : In multihands et pac ks, yo u will find one or more additio nal ha ndset, chargers with power supp ly units and additional rechargeable batteries.
5
EN

Handset and base station

CD 230 handset

1Earpiece 2Display, icons see page 7 3Menu & OK Key
Use to enter menus.
1
2
3
4
5
6
7
8
9
10
11
12
13
Use to select menu. Use to confirm an operation.
4 Redial, Mute & Back Key
Use to switch between call details (name/number or date /time). Use to enter redial list. Use to redial last dialled number. Use in talk mode to mute/unmute the handset microphone. Use in edit mode to delete the last character or digit.
5 Call log & Scroll up Key
Use to enter call log. Use to scroll up items. Use to increase ringer and receiver volume.
6 Phonebook & Scroll down Key
Use to access phonebook. Use to scroll down items. Use to reduce ringer and receiver volume.
7 Off & Exit Key
Use to end a call. Use to exit menus.
8 Talk & Recall Key
Use to take the line and answer a call. In Phonebook mode, Redial list and Call log use to dial the selected number. Use to send flash signal.
9 Insert #, Ringer off & Pause Key
Use to insert #. Use to enter a pause (P) when dialling. Use to turn the ringer on/off.
10 Insert star & Key lock Key
Use to lock the keypad.
11 Intercom and Conference Key
Use to make intercom calls. Use to set up 3-way conference.
12 Microphone 13 Loudspeaker Key*
Use to turn the speaker on/off.
*Warning ! Handsfree activation could suddenly increase the volume in the loudspeaker to a very high level. Make sure the handset is not too close to your ear.

CD 230 Base station

1Paging Key
Use for registration. Use for locating handset(s).
1
6

Icons on the handset display

When being used for the first time, it is sometimes necessary to wait until the batteries are sufficiently charged before the icons appear on the display.
The display gives information about the operation of your telephone. Following icons can be shown in the headline of the display.
Displays the current battery level. It scrolls during charging.
The phone is in use. It blinks during ringing.
There is a new voice mail in your network mailbox (subscription needed).
There is a new Call log record or Call log records are being reviewed.
Phonebook records are being reviewed.
The alarm clock is turned on.
Loudspeaker is turned on.
The ringer is turned off.
EN
The handset is linked to the base.
Press to confirm selection or operation.
More menu options are available upward.
More menu options are available downward.
Press to return to the previous screen. Press to delete characters or digits.
There are more digits on the right.
7
EN

Installing your phone

Installing the base station

Place the base station close enough to the telephone and mains power sockets so that the cables will reach.
1. Connect the output plug of the base adaptor to the adaptor socket on the back of the base unit and the base adaptor to the wall mains supply.
1 2
Warning ! The electrical network is classified as hazardous according to criteria in the standard EN 60-950. The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.
2. Connect the telephone line cord to the phone socket on the back of the base unit and to the wall phone socket.
Warning ! Always use the line cable provided with the product otherwise you may not have a dialling tone. Please take care that the power supply and telephone line are connected to the correct sockets as incorrect placement could damage your equipment.
3. If you have bought a multi-pack product, each extra handset comes with a charger and a charger adaptor. Connect the output plug of the charger adaptor to the adaptor socket on the bottom of the charger. Connect the charger adaptor to the wall mains supply.

Installing and replacing the batteries in the handset

1. Place 2 rechargeable NiMH AAA batteries (included), with the correct polarity, into the battery compartment on the handset.
2. Slide the battery door firmly into place.
3. Place the handset on the base unit or the charger and let the batteries continuously charge for 24 hours before using. The handset may get warm during the initial charge. This is normal. On first use it may be necessary to wait for a few minutes before seeing symbols on the display.
Warning : The base station must always be plugged into the mains when charging or when in use. Always use rechargeable batteries.
The warranty does not apply to the batteries and any other components which have a limited lifetime or are exposed to wear.
8

Battery life and range

Low battery warning

A low battery alert (during off hook) will inform you that the handset has to be recharged. If this happens during a call, the call may end shortly after the alert.
An empty battery icon indicates the batteries need recharging. Place the handset on the base unit or the charger to recharge the batteries. A handset reaching a very low battery voltage level will go into sleep mode, displaying LOW BATTERY on the screen.
Note : The warranty does not apply to the batteries and any other components which have a limited lifetime or are exposed to wear.
Batteries should not be disposed of with general household waste.

Battery life and range

Optimal battery life is reached after 3 cycles of complete charging & discharging. When reaching the range limit and the conversation becomes crackly, move closer to the base. To reach optimal range, place the base station away from electrical appliances.
Battery life in talk
time
up to 10 hours up to 120 hours up to 50 metres up to 300 metres
Battery life in standby
mode
Indoor range Outdoor range

Using GAP standard compliance

EN
The GAP standard guarantees that all DECT operating standard irrespective of their make. Your CD 230 handset and base station are GAP compliant, which means the minimum guaranteed functions are : register a handset, take the line, receive a call and dial. The advanced features may not be available if you use another handset than a CD 230 with your base station.
To register and use your CD 230 handset with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure described on page 25.
To register a handset of another make to the CD 230 base station, place the base station into registration mode (page 25), then follow the procedure in the manufacturer’s instructions.
TM
is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.
DECT
TM
GAP handsets and base stations comply with a minimum
9
EN

Registering your handset

You will need to register your handset if it shows UNREGISTERED in the display or if you wish to register the handset to a different base unit. You can register up to 4 handsets on a single base, and you can register a handset to 4 bases.
To register your handset :
1. Press . If your handset displays UNREGISTERED, go to step 5.
2. Select ADVANCED SET and press
3. Select REGISTRATION and press
4. Before you enter the PIN code, press and hold the PAGING key on the base for 4 seconds. The base is now in the registration mode. (If the base is full and cannot take on any more handset, you will not
be able to register. See “Un-registering a handset”, page 26 to delete a currently registered handset.)
5. Enter the PIN code (default: 0000) and press
6. Select a base station using the digit keys 1, 2 , 3 or 4. A blinking digit indicates that the base number is already used.
If the registration failed, follow the procedure and try again.
.
.
.

Using the menus

10
From standby, press to enter the menu.
Use UP/DOWN to go up or down in the menu list.
Press Softkey to confirm the selection.
Press Softkey to exit the menu or to go back to the previous menu level.
Loading...
+ 24 hidden pages