BRE65x, BRE64x, BRE63x, BRE62x, BRE61x
>75% recycled paper >75% papier recyclé
© 2015 Koninklijke Philips N.V. All rights reserved 4222.003.0112.2 (1/2016)
2 |
3 |
4 |
|
5 |
|
|
|
1 |
2 |
|
|
|
|
|
6 |
7 |
8 |
|
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22
BRE651/00 |
BRE644/10 |
BRE651/00 |
|
BRE651/00 |
BRE644/10 |
|
1 |
BRE650/10 |
BRE644/00 |
BRE650/10 |
|
BRE650/10 |
BRE644/00 |
|
|
BRE650/00 |
|
BRE650/00 |
|
BRE650/00 |
|
|
|
19 |
|
|
20 |
|
21 |
|
22 |
BRE651/00 |
BRE640/10 |
BRE630/10 |
BRE620/00 |
BRE644/10 |
BRE640/00 |
BRE651/00 |
|
BRE650/00 |
BRE640/00 |
BRE630/01 |
|
BRE644/00 |
BRE640/10 |
|
|
BRE650/10 |
BRE634/10 |
BRE630/00 |
|
|
|
|
|
|
|
|
|
18 |
|
|
|
15 |
|
16 |
|
|
|
|
|
|
|
|
|
|
|
|
25 |
14 |
|
|
|
|
|
|
|
13 |
|
|
|
17 |
|
|
|
|
|
BRE651/00 |
BRE640/00 |
BRE651/00 |
BRE644/10 |
BRE651/00 |
BRE640/10 |
|
|
BRE650/10 |
BRE634/10 |
BRE650/10 |
BRE640/10 |
BRE650/10 |
BRE640/00 |
|
|
BRE650/00 |
BRE630/10 |
BRE650/00 |
BRE630/10 |
BRE650/00 |
BRE634/10 |
|
|
BRE644/10 |
BRE630/00 |
BRE640/00 |
BRE630/00 |
BRE644/10 |
BRE630/01 |
|
|
BRE644/00 |
BRE620/00 |
BRE644/00 |
|
BRE644/00 |
|
|
|
BRE640/10 |
BRE610/00 |
|
|
|
|
8 |
|
|
|
|
|
|
|
7 |
|
9 |
|
10 |
|
12 |
|
|
|
|
|
BRE651/00 |
BRE640/00 |
|
|
|
|
|
|
BRE650/10 |
BRE634/10 |
|
|
1 |
|
|
|
BRE650/00 |
BRE630/10 |
23 |
|
|
|
|
BRE644/10 |
BRE630/01 |
|
||
|
|
|
|
|
|||
|
|
|
|
|
|
||
2 |
|
|
|
BRE644/00 |
BRE630/00 |
|
|
|
|
|
BRE640/10 |
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
24 |
|
|
|
6 |
|
11 |
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
English |
|
|
|
|
|
|
|
Introduction |
|
|
|
|
|
|
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
1Handle
2Speed lights (I and II)
3On/off button
4Battery indicator
5Release button
6Socket for small plug
7Epilating head
8Integrated light
9Massage cap
10Facial cap
11Delicate area cap
12Skin stretcher cap
13Shaving head
14Foil
15Trimmers
16Comb for shaving head
17Trimming head
18Comb for trimming head
19Coupling unit
20Body massage head
21Body exfoliation brush
22Protection cap for body exfoliation brush
23Cleaning brush
24Adapter (HQ8505; input: 100-240Vac; 50/60Hz; 9W, output: 15Vdc; 5.4W)
25Tweezers with light
Not shown: Pouch
Note: The heads and accessories supplied vary for different type numbers. Consult the overview illustration for the heads and accessories supplied with your particular appliance.
Note: Charge the appliance fully before you use it for the first time.
Note: This appliance can only be used without cord.
To charge the appliance, insert the small plug into the socket in the bottom of the appliance and put the adapter in the wall socket.
-The charge indicator flashes white (Fig. 2): the appliance is charging. Charging takes up to 1.5 hours.
-The charge indicator lights up white continuously (Fig. 3): the appliance is fully charged and has a cordless operating time up to 40 minutes.
-The charge indicator does not light up when the appliance is switched on: the appliance contains enough energy to be used.
-The battery indicator flashes orange (Fig. 2): the battery is almost empty and needs to be charged. Charge the appliance when you have finished using it.
Note: If the appliance is fully charged but still connected to the mains, the battery indicator flashes a few times when you press the on/off button. This indicates that you should disconnect the appliance from the mains before you can switch it on.
-When the battery is completely empty and you start charging it, the battery indicator flashes white quickly.
-After approximately 15 minutes, the battery indicator starts flashing white slowly. At this point, the battery contains enough energy for up to 10 minutes of epilation.
1To attach a head, press it onto the handle ('click') (Fig. 4).
2To detach a head, press the release button on the back of the appliance (Fig. 5).
1To attach an accessory, simply snap it onto the head ('click') (Fig. 6).
2To detach an accessory, grab its front and back and pull it upwards off the head (Fig. 7). To detach a comb, pull its back upwards with a fingernail (Fig. 8).
1To switch on the appliance, press the on/off button once. Speed 2 is selected automatically and speed light II lights up (Fig. 9).
2If you want to select speed 1, press the on/off button again. Speed light I lights up (Fig. 10).
3To switch off the appliance, press the on/off button once more.
The integrated light goes on automatically to give you a better view while you use the epilating head (Fig. 11). If you want to switch off the integrated light, keep the on/off button pressed for 3 seconds when you switch on the appliance.
The appliance is suitable for use in the bath or shower, but it can also be used dry. If you want to use creams or body lotion, apply them after you have used the appliance.
For gentle, less painful epilation, use the appliance on wet skin with or without your regular shower gel.
Slight skin irritation like red skin or red dots may occur after epilation. This is normal. We advise you to epilate before you go to bed at night, as any redness or skin irritation usually disappears overnight.
Note: The appliance can only be used without cord.
1When you epilate (with or without an accessory on the epilating head), place the appliance on the skin at the angle shown in the illustration (Fig. 12).
2When you use the appliance with other heads and accessories than the epilating head, make sure you place the heads and accessories flat onto the skin (Fig. 13).
3When you use the appliance on sensitive areas, stretch the skin with your free hand. When you use the appliance on your underarms, raise your arm and put your hand on the back of your head to stretch the skin (Fig. 14).
4Move the appliance slowly against the direction of hair growth (Fig. 15).
Note: If you move the appliance over your skin too fast, you may not obtain a smooth result.
Note: If your hairs are longer than 3-4mm, pretrim them for easier and more comfortable epilation.
You can use the epilating head to epilate your legs, underarms and bikini line.
Select speed 2 for most efficient epilation. Select speed 1 for areas with little hair growth and for hard-to-reach areas such as knees and ankles.
You can attach the massage cap onto the epilating head to massage the skin and minimize the pulling sensation of epilation during use.
You can attach the skin stretcher cap onto the epilating head. It keeps the skin tight during epilation to reduce pain.
You can attach the delicate area cap onto the epilating head for more comfortable epilation of delicate areas (e.g. the underarms and bikini line).
You can attach the facial cap onto the epilating head for precise epilation of facial hair (e.g. above your upper lip).
Do not use the appliance to epilate eyelashes, eyebrows or scalp hair.
You can use the shaving head to shave your legs and body.
Note: The appliance can be moved in two directions, for easier shaving of underarms.
Note: Always check the foil before use. If it is damaged in any way, replace the cutting unit right away (see 'Replacement').
You can attach the comb onto the shaving head to trim hairs to a length of 3mm.
You can use the trimming head to trim hard-to-reach areas in the bikini zone.
Place the trimming head flat onto the skin to trim (Fig. 16). Place the trimming head perpendicularly onto the skin for styling and shaping (Fig. 17).
You can attach the comb onto the trimming head to trim hairs in the bikini area to a length of 3mm (Fig. 18).
The body massage head rotates firmly to relax your muscles.
Note: You have to put the body massage head on the coupling unit before you can attach it onto the handle (Fig. 19).
You can use the body exfoliation brush to remove dead skin cells.
Do not use the body exfoliation brush on your face.
Note: You have to put the body exfoliation brush on the coupling unit before you can attach it onto the handle (Fig. 20).
Keep the adapter dry.
1To clean the epilating head, hold the appliance upside down, switch it on and rinse it with cold water for 15 seconds after every use (Fig. 21).
2To clean the shaving head (if supplied): Use the cleaning brush to brush away any hairs that have collected under the trimmers. Grab the two trimmers of the cutting unit and pull the cutting unit out of the shaving head (Fig. 22). Clean all parts of the shaving head with the cleaning brush, except the foil.
Note: Lubricate trimmer teeth and foils with a drop of sewing machine oil every six weeks for optimal performance.
3Rinse the cutting unit, heads and accessories under the tap. Shake them firmly to remove water drops.
4Let all parts dry completely.
5Place the cutting unit back into the shaving head ('click').
6Put protection caps or combs on the heads to prevent damage to the heads when you store them.
7Store the appliance, its heads and accessories in the pouch.
Note: Lubricate trimmer teeth and foils with a drop of sewing machine oil every six weeks for optimal performance.
To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details).
Shaving head (if supplied): For optimal performance, we advise you to replace the cutting unit of the shaving head every two years. If you use the shaving head twice or more times a week, replace the cutting unit more often. Always replace the cutting unit with one of the original type (BRL384). Body exfoliation brush (if supplied): If you use the body exfoliation brush 2-3 times a week, it lasts approximately 3 months. Replace the body exfoliation brush every 3 months with one of the original type (BRE351).
This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit www.philips.com/support for a list of frequently asked questions or contact the Consumer Care Centre in your country.
Problem Solution
The appliance |
Make sure you hold the appliance at the correct |
does not work as |
angle (Fig. 12) and move it across the skin slowly, |
well as it should. |
against the direction of hair growth. |
|
|
|
Clean the heads and accessories after every use. |
|
|
After charging, the |
The appliance is still connected to the mains. In this |
battery indicator |
case, the battery indicator flashes to indicate that |
flashes when I |
you should disconnect the appliance from the mains |
press the on/off |
before you can switch it on. |
button, but the |
|
appliance does not |
|
switch on. |
|
|
|
During use, the |
The overheat protection has been activated. The |
appliance |
overheat protection switches off the appliance |
becomes hot and |
automatically if it becomes too hot. To reset the |
suddenly stops |
overheat protection, let the appliance cool down and |
operating. Then the |
then switch it on again. To avoid overheating of the |
speed lights and |
appliance, do not press it too hard onto you skin. |
the battery |
|
indicator flash red |
|
for 30 seconds. |
|
|
|
My skin is irritated |
Slight skin irritation like red skin or red dots may |
after I have used |
occur. This is normal. To avoid irritated skin, make |
the appliance. |
sure that you gently move the appliance against the |
|
direction of hair growth. Do not apply too much |
|
pressure. If the irritation lasts longer than 3 days, we |
|
advise you to consult a doctor. |
|
|
|
Always stretch the skin with your free hand. When |
|
you use the appliance on your underarms, raise your |
|
arm and put your hand on the back of your head to |
|
stretch the skin (Fig. 14). |
Herzlichen Glückwunsch zu Ihrem Kauf und willkommen bei Philips! Um die Unterstützung von Philips optimal nutzen zu können, sollten Sie Ihr Produkt unter www.philips.com/welcome registrieren.
1Griff
2Geschwindigkeitsanzeigen (I und II)
3Ein-/Ausschalter
4Akkuanzeige
5Entriegelungstaste
6Buchse für Gerätestecker
7Epilierkopf
8Integriertes Licht
9Massageaufsatz
10Gesichtsaufsatz
11Aufsatz für empfindliche Hautpartien
12Hautstraffungsaufsatz
13Scherkopf
14Folie
15Schermesser
16Kamm für Scherkopf
17Schneidekopf
18Kamm für Schneidekopf
19Verbindungseinheit
20Körpermassagekopf
21Körper-Peeling-Bürste
22Schutzaufsatz für Körper-Peeling-Bürste
23Reinigungsbürste
24Ladegerät (HQ8505; Eingang: 100-240 V AC; 50/60 Hz; 9 W, Ausgang: 15 V DC; 5,4 W)
25Pinzette mit Licht
Nicht abgebildet: Tasche
Hinweis: Die Köpfe und mitgeliefertes Zubehör kann für verschiedene Typnummern variieren. Werfen Sie einen Blick auf die Übersicht, um zu erfahren, welche Köpfe und welches Zubehör mit Ihrem Gerät geliefert werden.
Hinweis: Laden Sie den Akku voll auf, bevor Sie das Gerät zum ersten Mal benutzen.
Hinweis: Dieses Gerät kann nur ohne Kabel verwendet werden.
Um das Gerät aufzuladen, stecken Sie den kleinen Stecker in die Steckdose an der Geräteunterseite und stecken Sie den Adapter in eine Wandsteckdose.
-Die Ladeanzeige blinkt weiß (Abb. 2): das Gerät wird aufgeladen. Das Laden dauert ca. 1,5 Stunden.
-Die Ladeanzeige leuchtet dauerhaft weiß (Abb. 3): das Gerät ist vollständig aufgeladen und kann bis zu 40 Minuten lang kabellos betrieben werden.
-Die Ladeanzeige leuchtet nicht, wenn das Gerät eingeschaltet ist: Das Gerät weist eine ausreichende Ladung für die Verwendung auf.
-Die Akkuanzeige blinkt orange (Abb. 2): der Akku ist fast leer und muss aufgeladen werden. Laden Sie das Gerät, wenn Sie mit dem Gebrauch fertig sind.
Hinweis: Wenn das Gerät vollständig geladen ist, aber noch an die Stromversorgung angeschlossen ist, blinkt die Akkuanzeige ein paar Mal, wenn Sie den Ein/Ausschalter drücken. Dies bedeutet, dass Sie das Gerät vom Stromnetz trennen sollten, bevor Sie es einschalten.
-Wenn der Akku vollständig leer ist und Sie mit dem Aufladen des Akkus beginnen, blinkt das Akkusymbol schnell weiß.
-Nach etwa 15 Minuten beginnt die Akkuanzeige langsam weiß zu blinken. Zu diesem Zeitpunkt hat der Akku genügend Kapazität für bis zu 10 Minuten an Haarentfernung.
1Um einen Kopf zu befestigen, drücken Sie ihn auf den Griff bis er hörbar einrastet (Abb. 4).
2Um einen Kopf abzunehmen, drücken Sie den Freigabeschalter an der Rückseite des Gerätes (Abb. 5).
1Um ein Zubehörteil aufzusetzen, drücken Sie es einfach auf den Kopf, bis es hörbar einrastet (Abb. 6).
2Um das Zubehör abzunehmen, fassen Sie es an seiner Vorderseite an und ziehen Sie es nach oben weg vom Kopf (Abb. 7). Um den Kamm abzunehmen, ziehen Sie ihn mit dem Fingernagel (Abb. 8) nach hinten und nach oben.
Das Gerät einund ausschalten
1Um das Gerät einzuschalten, drücken Sie einmal den Ein-/Ausschalter. Geschwindigkeitsstufe 2 ist automatisch gewählt und die Geschwindigkeitsanzeige 2 leuchtet auf (Abb. 9).
2Wenn Sie die Geschwindigkeitsstufe 1 auswählen möchten, drücken Sie den Ein-/Ausschalter noch einmal. Geschwindigkeitsanzeige I leuchtet auf (Abb. 10).
3Um das Gerät auszuschalten, drücken Sie den Ein-/Ausschalter noch einmal.
Das integrierte Licht schaltet sich automatisch ein, um Ihnen beim Gebrauch des Epilierkopfes (Abb. 11) eine bessere Sicht zu geben. Wenn Sie das integrierte Licht ausschalten möchten, halten Sie den Ein-/Ausschalter beim Einschalten des Gerätes für 3 Sekunden lang gedrückt.
Das Gerät ist für den Einsatz im Bad oder unter der Dusche geeignet ist, kann aber auch trocken verwendet werden. Wenn Sie Cremes oder Körpermilch verwenden möchten, tragen Sie sie nach dem Gebrauch des Gerätes auf.
Für eine sanfte, weniger schmerzvolle Haarentfernung verwenden Sie das Gerät auf nasser Haut mit oder ohne Ihrem regulären Duschgel.
Eine leichte Hautreizung wie z.B. gerötete Haut oder rote Punkte können nach der Haarentfernung auftreten. Das ist normal. Wir empfehlen das Epilieren vor dem Schlafengehen, da alle Rötungen oder Hautreizungen in der Regel über Nacht abklingen.
Hinweis: Das Gerät kann nur ohne Kabel verwendet werden.
1Wenn Sie epilieren (mit oder ohne Zubehör auf dem Epilierkopf), platzieren Sie das Gerät in dem Winkel auf der Haut, wie es in der Abbildung gezeigt wird (Abb. 12).
2Wenn Sie das Gerät mit anderen Köpfen oder Zubehörteilen als dem Epilierkopf verwenden, achten Sie darauf, dass Sie die Köpfe und Zubehörteile flach auf der Haut platzieren (Abb. 13).
3Wenn Sie das Gerät in empfindlichen Bereichen verwenden, straffen Sie die Haut mit Ihrer freien Hand. Wenn Sie das Gerät in den Achselhöhlen verwenden, heben Sie Ihren Arm und legen Sie die Hand auf den Hinterkopf, um die Haut zu straffen (Abb. 14).
4Führen Sie das Gerät langsam gegen die Haarwuchsrichtung (Abb. 15).
Hinweis: Wenn Sie das Gerät zu schnell über Ihre Haut führen, erzielen Sie möglicherweise kein glattes Ergebnis.
Hinweis: Falls Ihre Haare länger als 3-4 mm sind, kürzen Sie sie, um die Haarentfernung leichter und angenehmer zu gestalten.
Sie können den Epilierkopf zum Epilieren Ihrer Beine, Achseln und der Bikinizone verwenden.
Wählen Sie Geschwindigkeitsstufe 2 für die gründlichste Epilation. Wählen Sie Geschwindigkeitsstufe 1 für Hautpartien mit geringer Behaarung und für schwer erreichbare Zonen, wie z. B. Knie und Knöchel.
Sie können den Massageaufsatz auf den Epilierkopf aufsetzen, um die Haut zu massieren und das Zupfgefühl während des Epilierens zu lindern.
Sie können den Skin Stretcher-Aufsatz auf den Epilierkopf aufsetzen. Dadurch wird die Haut während des Epilierens gestrafft, um den Schmerz zu lindern.
Sie können den Aufsatz für empfindliche Hautpartien auf den Epilierkopf aufsetzen, um sensible Bereichen (z.B. Achselhöhlen und Bikinibereich) angenehmer epilieren zu können.
Sie können den Gesichtsaufsatz auf den Epilierkopf aufsetzen, um Gesichtsbehaarung Bereichen (z.B. Oberlippe) präzise epilieren zu können.
Verwenden Sie das Gerät nicht zum Epilieren von Wimpern, Augenbrauen oder Kopfhauthaaren.
Sie können den Scherkopf zum Rasieren Ihrer Beine, Achseln und der Körperbehaarung verwenden.
Hinweis: Das Gerät kann in zwei Richtungen bewegt werden, um die Achselhöhlen leichter zu rasieren.
Hinweis: Überprüfen Sie die Folie vor jedem Gebrauch. Falls sie in irgendeiner Weise beschädigt ist, sollten Sie die Schneideeinheit unverzüglich ersetzen (siehe „Ersatz“).
Sie können den Kamm auf den Scherkopf aufsetzen, um Haare auf eine Länge von 3 mm zu trimmen.
Sie können den Schneidekopf zum Trimmen von schwer erreichbaren Bereichen in der Bikinizone verwenden.
Setzen Sie den Schneidekopf zum Trimmen (Abb. 16)flach auf die Haut auf. Setzen Sie den Schneidekopf senkrecht zur Gestaltung und Formgebung (Abb. 17) auf die Haut auf.
Sie können den Kamm auf den Schneidekopf aufsetzen, um Haare auf eine Länge von 3 mm (Abb. 18) zu trimmen.
Der Körpermassagekopf rotiert kräftig, um Ihre Muskeln zu entspannen.
Hinweis: Sie müssen den Körpermassagekopf auf das Verbindungsteil aufsetzen, bevor Sie ihn an dem Griff (Abb. 19) befestigen können.
Sie können die Körper-Peeling-Bürste zur Entfernung abgestorbener Hautzellen verwenden.
Verwenden Sie die Körper-Peeling-Bürste nicht im Gesicht.
Hinweis: Sie müssen die Körper-Peeling-Bürste auf das Verbindungsteil aufsetzen, bevor Sie sie an dem Griff (Abb. 20) befestigen können.
Halten Sie das Ladegerät trocken.
1Zum Reinigen des Epilierkopfes halten Sie das Gerät auf den Kopf gedreht, schalten Sie es ein und spülen es nach jedem Gebrauch (Abb.
21)für 15 Sekunden lang mit kaltem Wasser ab.
2So reinigen Sie den Scherkopf (falls mitgeliefert): Verwenden Sie die Reinigungsbürste, um die Härchen zu entfernen, die sich möglicherweise unter den Messern angesammelt haben. Greifen Sie die zwei Messer des Schneideteils und ziehen Sie das Schneideteil aus dem Scherkopf (Abb.
22).Reinigen Sie alle Teile des Scherkopfes mit der Reinigungsbürste unter Aussparung der Folie.
Hinweis: Ölen Sie die Zähne und Folien des Langhaarschneiders alle sechs Wochen mit einem Tropfen Nähmaschinenöl, um eine optimale Leistung zu gewährleisten.
3Spülen Sie das Schneideteil, Köpfe und Zubehörteile unter fließendem Wasser ab. Schütteln Sie sie kräftig, um die Wassertropfen zu entfernen.
4Lassen alle Teile vollständig trocknen.
5Setzen Sie die Schneideeinheit wieder in den Scherkopf, bis sie hörbar einrastet.
6Setzen Sie die Schutzaufsätze oder Kämme nach Gebrauch auf die Köpfe, um Beschädigungen der Scherköpfen bei der Lagerung zu vermeiden.
7Verwahren Sie das Gerät mit den Köpfen und Zubehörteilen in dem Beutel.
Hinweis: Ölen Sie die Zähne und Folien des Langhaarschneiders alle sechs Wochen mit einem Tropfen Nähmaschinenöl, um eine optimale Leistung zu gewährleisten.
Um Zubehör oder Ersatzteile zu kaufen, gehen Sie auf www.shop.philips.com/service, oder suchen Sie Ihren Philips Händler auf. Sie können sich auch an ein Philips Service-Center in Ihrem Land wenden. Die Kontaktdaten finden Sie in der internationalen Garantieschrift. Scherkopf (falls mitgeliefert): Für eine optimale Leistung empfehlen wir, das Schneideteil des Scherkopfes alle 2 Jahre auszuwechseln. Wenn Sie den Scherkopf zweimal wöchentlich oder häufiger verwenden, sollten Sie die Schneideeinheit nach ein bis zwei Jahren, oder wenn sie beschädigt ist, auswechseln. Ersetzen Sie die Schneideeinheit nur durch ein Originalteil (BRL384).
Körper-Peeling-Bürste (falls mitgeliefert): Wenn Sie die Köper-Peeling- Bürste 2-3 Mal in der Woche verwenden, reicht sie etwa 3 Monate. Ersetzen Sie die Köper-Peeling-Bürste alle 3 Monate nur durch ein Originalteil (BRE351).
Dieses Kapitel fasst die häufigsten Probleme zusammen, die beim Gebrauch des Geräts auftreten können. Sollten Sie ein Problem mithilfe der nachstehenden Informationen nicht beheben können, besuchen Sie unsere Website unter: www.philips.com/support und schauen Sie in der Liste „Häufig gestellte Fragen“ nach oder wenden Sie sich an das Philips Consumer Care-Center in Ihrem Land.