■ Disconnect from the electric outlet before cleaning. Do not use
liquid or aerosol cleaners. Clean only with a slightly damp cloth.
■ Do not block any of the ventilation openings. Install in accordance
with the manufacturers instructions.
■ Do not install in direct sunlight, near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
■ Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
■ Do not remove cover, to prevent electric shock. Refer servicing to
qualified service personel only.
■ Unauthorized modification of this equipment or usage of an
unshielded connecting cable may cause excessive interference.
■ Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls can result in
damage which often requires extensive work by a qualified technician
to restore the unit to normal operation.
■ Use in well-ventilated area and do not block any of the ventilation
openings. Install in accordance with the manufacturer’s instructions.
■ The unit must be operated from the type of power source indicated
on the label. If the type of available power is unknown, consult your
dealer or local power company.
■ Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician. Do not alter the plug; this will defeat the safety feature.
■ Do not overload wall outlets and extension cords as this can result
in a risk of fire or electric shock.
■ If the picture displayed looks abnormal, turn off the unit and
disconnect it from the electric outlet. Verify your signal wire
connections and reconnect the display to the electric outlet.
■ Only use attachments/accessories specified by the manufacturer.
3
User Manual BDS4622V/R and BDS4624R
■ Use only with a cart, stand, tripod, bracket, or table specified by the
■ Unplug this apparatus during lightning storms or when unused for
■ Refer all servicing to qualified service personnel. Servicing is required
■ This product may contain lead and mercury. Disposal of these
■ Damage Requiring Service:
■ Tilt/Stability:
■ Do not place the unit on a bed, soffa, rug, or similar surfaces.
■ Wall or Ceiling Mounting:
■ Power Lines:
manufacturer, or sold with apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
long periods of time.
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org
The appliance should be serviced by qualified service personnel
when:
● The power supply cord or the plug has been damaged or frayed.
● Objects have fallen, or liquid has been spilled into the appliance.
● The appliance has been exposed to rain.
● The appliance does not appear to operate normally or exhibits a
marked change in perfomance.
● The appliance has been dropped, or the enclosure damaged.
● Unit does not operate normally when the operating instructions
are followed.
● All displays must comply with recommended international global
safety standards for tilt and stability properties of its cabinet
design.
● Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet which could
ultimately overturn the product.
● Do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the set and cause product damage
and/or personal injury.
● Do not place the unit on an unstable cart, stand or table. Or the
product may fall, causing serious damage.
The appliance should be mounted to a wall or ceiling only as
recommended by the manufacturer.
An outdoor antenna should be located away from power lines.
4
User Manual BDS4622V/R and BDS4624R
■ Outdoor Antenna Grounding:
● If an outside antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide some protection
against voltage surges and built up static charges.
● Section 810 of the National Electric Code, ANSI/NFPA
No. 70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding
connectors, location of antenna-discharge unit, connection
grounding electrodes, and requirements for the grounding
electrode.
■ Object and Liquid Entry:
Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
■ Battery Usage:
CAUTION: To prevent battery leakage that may result in bodily
injury, property damage, or damage to the unit.
● Install all batteries correctly, with + and - aligned as marked on
the unit.
● Do not mix batteries (old and new or carbon and alkaline, etc.).
● Remove batteries when the unit is not used for a long time.
5
User Manual BDS4622V/R and BDS4624R
1.2WARNINGS AND PRECAUTIONS
1.2.1NOTE TO THE CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground must be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONEL. a
■ This lightning flash with arrow-head within a triangle indicates
■ For the safety of everyone in your household, do not remove
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
uninsulated material within your unit, which can cause an electric
shock. For the safety of everyone in your household, do not remove
product cover.
product cover. The exclamation point within a triangle calls
attention to features for which you mustread the enclosed literature
closely to prevent operating and maintenance problems.
WARNING
To reduce the risk of fire or electric shock, this appliance must not be
exposed to rain or moisture, and objects filled with liquids, such as
vases, must not be placed upon this apparatus.
CAUTION
To prevent electric shock, match wide plug blade to wide slot, and fully
insert.
ATTENTION
Pour éviter les chocs électriques, introduire la lame la plus large de la
fiche dans la bome correspondante de la prise et pousser jusqu’au fond.
6
User Manual BDS4622V/R and BDS4624R
1.3CLEANING & CARE
■ To avoid possible shock hazard, please be sure that the television is
unplugged from the electrical outlet before cleaning.
■ When cleaning the television screen, take care not to scratch or
damage the screen surface (avoid wearing jewelry or using anything
abrasive).
■ Wipe the front of the screen with a clean cloth dampened with
water. Use even, easy, vertical strokes when cleaning.
■ Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool clear water. Use a clean dry cloth to
dry the wiped surfaces.
■ Occasionally vacuum the ventilation holes or slots in the cabinet
back.
■ Never use thinners, insecticide sprays, or other chemicals on or near
the cabinet, as they might cause permanent marring of the cabinet
finish.
■ Do not allow a still image to be displayed for an extended period of
time as this can cause a permanent after-image to remain.
1.4END-OF-LIFE DISPOSAL
■ This Philips product and its packaging contain materials that can be
recycled and re-used. Specialized companies can recycle your
product to increase the amount of reusable materials and minimize
the amounts which need to be properly disposed.
■ This product might also use batteries, which should not be thrown
away when depleted, but should be handed in and disposed of as
small chemical waste.
■ Please find out about the local regulations regarding the disposal of
the television, batteries, and packaging materials whenever you
replace existing equipment.
7
User Manual BDS4622V/R and BDS4624R
8
User Manual BDS4622V/R and BDS4624R
2. REGULATORY NOTICE (FOR USA AND CANADA ONLY)
FCC Statement
The Federal Communications Commission Radio Frequency
Interference Statement includes the following warning:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
receptions, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
Warning
User must use shielded signal interface cables to maintain FCC
compliance for the product. Provided with this display is a detachable
power supply cord with IEC320 style terminations. It may be suitable for
connection to any UL Listed personal computer with similar
configuration. Before making the connection, make sure the voltage
rating of the computer convenience outlet is the same as the monitor
and that the ampere rating of the computer convenience outlet is equal
to or exceeds the monitor voltage rating. For 120 Volt applications,
use only UL Listed detachable power cord with NEMA configuration
5-15P type (parallel blades) plug cap. For 240 Volt applications use only
UL Listed Detachable power supply cord with NEMA configuration
6015P type (tandem blades) plug cap.
IC Compliance Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations of ICES-003.
Cet appareil Numerique de classe B respecte toutes les exigences du
Reglemont NMB-03 sur les equipements produisant des interferences au
Canada.
Notice de Conformit IC
Cet appareil numerique de classe B respecte toutes les exigences du
Reglement ICES-003 sur les equipements produisant des interferences
au Canada.
9
User Manual BDS4622V/R and BDS4624R
10
3. PRODUCT FEATURES
User Manual BDS4622V/R and BDS4624R
This monitor uses a slim design at only 9.8cm thick. Its excellent picture
quality is perfect for multimedia applications.
■ Multiple inputs modules :
● PC module: RGB (D-sub 15-pin), DVI, and RS-232 (D-sub 9-pin
male) inputs.
● VIDEO module: Scart(CVBS) x 1, Scart(S-Video ) x1,
Component (RCA) input x 1, and composite (RCA) inputs x 1;
audio (R/L) x 1 outputs.
● Resolution for PC module: SXGA (1280X1024), 60Hz.
■ Power management: Equipped with energy saving function.
■ Fan-free design: This monitor has been design to reduce energy
consumption, so there is no cooling fan inside. As a result, you will
not be disturbed by the noise of cooling fans.
■ Miscellaneous:
● PIP/POP function: It allows you to display pictures from different
sources in six different Picture-In-Picture (PIP) or
Picture-Of-Picture (POP) mode.
● A pair of high-definition built-in speakers (5W+5W or 7W+7W).
You can purchase a pair of external speakers (15W+15W) to
enjoy a better sound effect.
● Three EQ options allows you to adjust the best sound effect.
● This product has been licensed to use the SRS technology
product by the SRS Labs, Inc.
Is the trademark of SRS Labs, Inc
11
User Manual BDS4622V/R and BDS4624R
12
4. UNPACKING AND INSTALLATION
4.1UNPACKING
■ The monitor is packed in a carton, together with the standard
accessories. Any other optional accessories will be packed
separately.
■ The weight of the monitor is approx 37 kg. Due to the size and
weight it is recommended to move it by 2 people.
■ The protective glass and the glass substrate are installed on the front
of the product. Since both glasses can be broken and scraped easily
the product has to be handled with care. Never place the monitor
with the glass faced down unless it is protected with pads.
■ After opening the carton ensure that the content is in good
condition and complete.
■ When possible use the handles on the back of the monitor for
transport.
User Manual BDS4622V/R and BDS4624R
13
User Manual BDS4622V/R and BDS4624R
4.2PACKAGE CONTENTS
Please verify that you received the following items with your package
content:
1 Monitor
2 Remote Control
3 CD-ROM with User Manual (For BDS 4624R printed version only)
4 Power cable
5Batteries
6 AV cable
7 D-sub cable
14
User Manual BDS4622V/R and BDS4624R
4.3INSTALLATION NOTES
■ Read this manual carefully before you start to install this monitor.
■ Due to the high power consumption, always use the plug exclusively
designed for this product. If an extended line is required, please
consult your service agent.
■ Installed on a flat surface to avoid tipping.
Keep a distance of at least 10 cm between the back of the product
and the wall or any funiture for a good ventilation.
■ Do not install this monitor in the kitchen, bathroom or any other
places with high humidity, to avoid shorter service life of the
electronic components.
■ Please ensure the monitor is installed horizontally.
Any 90 degrees clockwise or counter-clockwise installation may
induce poor ventilation and subsequent component damage.
■ To protect the screen and avoid screen damage, do not display a still
picture for a long time.
15
User Manual BDS4622V/R and BDS4624R
16
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.