How it Works
Philips
Loading...
AZALIS 288
Service Manual
48 pgs1.9 Mb0
User manual
62 pgs1.12 Mb0

Philips AZALIS 288 Service Manual

Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
VY-V-640-203
Page : 1 Langue : EN Date : 2001-09-11
SERVICE MANUAL
Repair for Cellular Telephone
AZALIS 288
LEVEL 1 / LEVEL 2
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Last updates :
Service Repair Support
SERVICE Manual
VY-V-640-203
Page : 2 Langue : EN Date : 2001-09-11
DATE MODIFICATION PAGE
02/05/2001
REVISION 2 : 23/07/2001 REVIEW OF RADIO TEST PLAN PAGE : 18, 19, 20
SPECIFICS COMPONENTS FOR
REVISION 3 : 29/08/2001
REVISION 4 : 11/09/01
OPERATOR ADDED NOMENCLATURE
CHANGE CARACTERE
“eeprom status”
REVISION 1
PAGE : 41, 42
PAGE : 15
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
CONTENTS
VY-V-640-203
Page : 3 Langue : EN Date : 2001-09-11
1.0 PURPOSE--------------------------------------------------------------------------------------------------------------4
2.0 SCOPE-------------------------------------------------------------------------------------------------------------------4
3.0 REFERENCE----------------------------------------------------------------------------------------------------------4
4.0 GLOSSARY/ACRONYM LIST-----------------------------------------------------------------------------------4
5.0 TEST EQUIPMENT AND TOOLS------------------------------------------------------------------------------4
6.0 TEST AND INSPECTION PLAN--------------------------------------------------------------------------------5
1. 5
2. 6.1 USER INTERFACE TEST --------------------------------------------------------------------------------------------------------------------------5
3. 6.2 RF TEST----------------------------------------------------------------------------------------------------------------------------------------------5
7.0 BEFORE STARTING-----------------------------------------------------------------------------------------------7
4. 7.2 DESCRIPTION OF THE TRANSCEIVER-------------------------------------------------------------------------------------------------------7
5. 7.1 DESCRIPTION OF THE DISPLAY----------------------------------------------------------------------------------------------------------------8
6. 7.3 USING THE CAROUSEL----------------------------------------------------------------------------------------------------------------------------9
7. 7.4 INSERTING THE MICRO-SIM CARD---------------------------------------------------------------------------------------------------------10
8. 7.5 INSERTING THE BATTERY---------------------------------------------------------------------------------------------------------------------11
9. 7.6 ATTACH THE BATTERY COVER-------------------------------------------------------------------------------------------------------------11
10. 7.7 REMOVING THE BATTERY -----------------------------------------------------------------------------------------------------------------11
11. 7.8 CHARGING THE BATTERY ------------------------------------------------------------------------------------------------------------------ 12
12. 7.9 W@P INTRODUCTION ----------------------------------------------------------------------------------------------------------------------13
8.0 TEST PROCEDURES--------------------------------------------------------------------------------------------15
8.1 INITIAL FUNCTIONAL CHECK FOR TCD 288AZALIS------------------------------------------------------------------------------------15
8.2 RF TEST---------------------------------------------------------------------------------------------------------------------------------------------18
8.3 BATTERY CHARGING (IGN : IGNITION) / CURRENT CONSUMPTION-----------------------------------------------------------------23
8.4 W@P TEST PROCEDURE ------------------------------------------------------------------------------------------------------------------------25
9.0 ASSEMBLY / DISMANTLEMENT PROCEDURES----------------------------------------------------32
9.1 DISMANTLEMENT-----------------------------------------------------------------------------------------------------------------------------------32
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Service Repair Support
VY-V-640-203
Page : 4
Centre du Mans
Langue : EN Date : 2001-09-11
9.2 ASSEMBLY---------------------------------------------------------------------------------------------------------------------------------------------37
9.3 E XPLODED VIEW OF THE TRANSCEIVER------------------------------------------------------------------------------------------------------42
10.0 SOLUTIONS IN CA SE OF PROBLEMS DURING THE TESTS-----------------------------------44
11.0 RECOMENDED PAR LIST – TCD288 AZALIS ---------------------------------------------------------46
11.1 COMMON PARTS – OUT OF WARRANTY ---------------------------------------------------------------------------------------------------- 46
11.2 SPECIFIC PARTS – OUT OF WARRANTY -------------------------------------------------------------------------------------------------- 46
11.3 COMMON PARTS – IN WARRANTY-----------------------------------------------------------------------------------------------------------47
ANNEX 1----------------------------------------------------------------------------------------------------------------------48
1.0 PURPOSE
This document establishes the functional test and inspection procedures for the second level service repair of the AZALIS 288 transceiver.
2.0 SCOPE
The test plan is applicable to all levels of service repair of the AZALIS 288 transceiver.
3.0 REFERENCE
None.
4.0 GLOSSARY/ACRONYM LIST
Window or Bezzel Protective plastic over the LCD display SW Software PN Hardware Configuration of the Mobile CN Matrix for Types of SW used on the different hardware HW Hardware ASC Authorized Service Center NSC National Service Center Test SIM Card Used for functionality of PHILIPS Mobile Phones Test SIM Card « SP » SIM Card used to simulate the user interface and enable radio tests
5.0 TEST EQUIPMENT AND TOOLS
Equipment / Tools
- Production Test SIM Card - Part No. : 4311 255 00781
- Test SIM Card « SP » - Part No. : 4311 255 00782
- Digital Multimeter - Recommended Model : Fluke Specification with current reading in mA.
- Digital Radiocommunication Tester.
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Service Repair Support
Communications
Centre du Mans
- Coupling system with shielded chamber.
- RF connector - Part No. : 619052 (AMP)
or - RF Cable SMA 3Ghz 0.5m - Part No. : 168-4968 (RADIOSPARES)
- Modified battery cover
6.0 TEST AND INSPECTION PLAN
The test plan is derived from the Product Test Reference of AZALIS 288.
6.1 User Interface Test
VY-V-640-203
Page : 5 Langue : EN Date : 2001-09-11
Use the Test SIM Card « SP »/ Production to test the transceivers as follows :
♦ On/Off button ♦ LCD Backlight ♦ Keyboard Test ♦ Buzzer Test ♦ Vibrator Test ♦ Audio Test ♦ Antenna Test ♦ LCD ♦ IMEI ♦ Tester Status/Eeprom Status
With a fast Charger connected with the PRODUCT’s bottom connector , check the full scrolling from one mode to the next when charging IGN (Ignition) – Battery.
6.2 RF Test
The radio test must be performed with a Digital Radio Test Set connected to the RF connector with the specific RF cable.
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
VY-V-640-203
Page : 6 Langue : EN Date : 2001-09-11
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
7.0 BEFORE STARTING
7.2 Description of the transceiver
Service Repair Support
VY-V-640-203
Page : 7 Langue : EN Date : 2001-09-11
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
7.1 Description of the display
Service Repair Support
VY-V-640-203
Page : 8 Langue : EN Date : 2001-09-11
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Service Repair Support
VY-V-640-203
Page : 9
Centre du Mans
Langue : EN Date : 2001-09-11
7.3 Using the carousel
The carousel is a circular loop of icons displayed on the screen. These icons provide access to the different menus and sub menus used to operate your phone.
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
7.4 Inserting the MICRO-SIM Card
Service Repair Support
VY-V-640-203
Page : 10 Langue : EN Date : 2001-09-11
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
7.5 Inserting the Battery
Service Repair Support
VY-V-640-203
Page : 11 Langue : EN Date : 2001-09-11
7.6 Attach the battery cover
7.7 Removing the battery
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
7.8 Charging the battery
Service Repair Support
VY-V-640-203
Page : 12 Langue : EN Date : 2001-09-11
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
Decoder
PHILIPS Consumer
Communications
Service Repair Support
VY-V-640-203
Page : 13
Centre du Mans
Langue : EN Date : 2001-09-11
If the battery is totally discharged, the battery icon will show and start scrolling 2 or 3 minutes only after connecting the charger.
7.9 W@P Introduction
The purpose of W@p (Wireless Application Protocol) is to enable easy and fast delivery of relevant information and services to mobile users. However, mobile Internet does not mean navigating on the Internet with a wireless device but rather to access to some services in a mobile context.
The W@P architecture was designed to enable standard Internet servers to provide services to wireless devices. The W@P wireless protocol is based on Internet standards such as HTTP and TLS but has been optimized according to the constraints of the wireless terminals: low memory capacity, small screen size and of the network: limited bandwidth.
The W@P architecture is made up of 4 technological parts which are necessary for accessing W@P services on a mobile phone. These are:
W@P navigator or browser Mobile operator network W@P gateway / W@P server Web server
Customer Gateway Server
4. Encoded
Request
1. Encoded
Answer
Encoder/
3. Request
Content
Generation
2. Answer
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Service Repair Support
VY-V-640-203
Page : 14
Centre du Mans
Langue : EN Date : 2001-09-11
* Subscription
The customer has to contact his Network Operator to inquire about his subscription and the options he can subscribe to. Generally the customer just have to request his W@P access to his provider and he will not be charged for that.
* W@P parameters
Parameters have to be set in the mobile phone in order to access W@P services . However, there are two
cases depending on the commercial offer:
* Transceiver sold via an operator package(with subscription included):
- Parameters cannot be accessed from the W@P settings menu of the mobile phone: The transceiver is W@P locked. The W@P connections will always be made from the operator W@P homepage and search engines will be available. The customer will have to ask for a password from his/her operator to unlock the W@P settings.
- Parameters can be accessed from the W@P settings menu of the mobile phone: The customer changes the W@P parameters according to his/her own convenience.
* Retail transceiver(without subscription included):
- Phones are configured by the manufacturer with no W@P parameter. The end user has to ensure that the W@P functionalities and a data/fax options have been subscribed.
The end user has also to set the W@P parameters by asking for them from his/her operator or by using parameters of another company (available on Internet, newspaper etc.)
Detailed parameters
Phone Number (or dial-up number) : to establish a connection with the Internet Service Provider Login (or User Name) : if requested by your ISP The password : if requested by your ISP IP address for the Gateway : for communications between Internet Service Provider and Gateway
& Port Number (for a secure or non secure connection) Home page address(or URL address): for communications between Gateway and Web server
Please note that it is important to respect small and capital letters according to your operator instructions. It is also possible that your provider does not require the Login and/or Password.
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Départ. Technical support- CM640 PROCEDURE COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
8.0 TEST PROCEDURES
Service Repair Support
VY-V-640-203
Page : 15 Langue : EN Date : 2001-09-11
8.1 Initial Functional check for TCD 288AZALIS
8.1.1 Insert the Test Production Card into the SIM Reader at the back of the cellular phone and clip a charged battery on the phone.
8.1.2 Press the «ON» button for 2 seconds at least and the LCD will show a message which contains information of FA (Final Adjustment) status and 12NC.
8.1.3 Follow the instructions as mentioned below :
Step Procedure Observation
Press Key 1
1
2
3
4
Press Key 1 again.
Press key 2 (Audio loop local effect)
Press key 2 again
Press key 3 Audio loop test (Speak to Mic and listen echo from Speaker)
Press key 3 again
Press key 4 Check for the Backlight function in the same time.
Continue Buzzer signal Left corner displays 1
00 "LocalEffect" " XX XX XX“ “ XX XX” Left corner displays 2 01 "AUDIO xx xx xx xx” "EEP xx xx xxxx ”
Left corner displays 3 02 Backlight must be on
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
Loading...
+ 33 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use