Philips AZ 6808 User Manual
Specifications and Main Features
- A CD player.
- The battery type is SBC 6408 and it is rechargeable.
- The mains adapter type is SBC 6608 or SBC 6619.
- The maximum voltage is 6 volts (6V).
- A stereo systems connection is facilitated by a CD OUT socket.
- A remote socket is meant for SBC 6203 infrared remote controller.
- Action buttons for controlling the volume levels.
- Has four options: JAZZ, POP, CLASSIC, and DBB which stands for Dynamic Bass Boost.
- AMBIENCE enables the user to experience surround sound.
- It is used for suppressing the sound for a limited time.
- Buttons for starting and interrupting a sequence.
- REMOTE controls which when pressed twice erase default memory functions, STOP button.
- Can be used to save up to thirty two tracks two thousand memories are all in one mode.
- The function that will allow the CD to only speak for a short while.
- Playing tracks in the reverse order.
- replaying all tracks of the CD.
- Indicators of the current mode are TRACK, TIME, MEMORY, SCAN, PAUSE, SHUFFLE, REPEAT and its number;
- There is a PHONES socket for stereo headphones or mini loudspeakers.
- If the CD is not operated for 30 seconds, it turns itself off to prevent overheating.
- You do not have to oil self-lubricating bearings anymore.
- Provided are recommendations on how to maintain it.
Frequently Asked Questions
Q: What is the method of charging the battery?
A: Connect the CD players mains adapter to the 6 volt DC socket and insert the battery into the device.
Your charge cycle may range between four hours on the lower end and four hours on the higher end.
Q: The CD player doesn’t read the inserted CD, what am I supposed to do?
A: Double check if the CD was inserted label up, see if the CD is dry and clean and not scratched, and check if the lens is not fogged.
Q: How do I store tracks that I want?
A: Select the track that you want to store, then press MEMORY then use the PREVIOUS or NEXT buttons so you can select such specific track.
Q: Do I have to wait for the CD player to charge or can I use it while charging?
A: This model of the CD player is able to work while plugged in, and therefore there is no need to wait for an entire charge for functioning.
Q: I see indicators on the display, what information do they provide?
A: Such information includes the number of the track currently being played, the duration of the playing time, and numerous other function indicators such as MEMORY, SCAN, PAUSE, SHUFFLE or REPEAT.
Q: Yesterday, I remember the informational stored in the memory for a long time, today I know it has been erased, how can I erase such a memory?
A: You simply need to press the STOP button twice, and that will erase specific memories entirely.
Q: I want to try Jazz music, what settings do I have to adjust?
A: JAZZ, POP, CLASSIC and the DBB setting are all options you can enable.
User Manual
Loading...