Philips AZ1004/05, AZ1004/01 User Manual [no]
AZ 1004
CD Soundmachine
AZ 1004
AZ 1004
CD Soundmachine
AZ 1004
CLASS 1
LASER PRODUCT
6 x R14 • UM-2 • C-CELLS
%
#
$
0 9! 8 7
4
321
5
6@
1
A AB
C
X
prog
prog
Important notes for users in the U.K.
Mains plug
This apparatus is fitted with an approved 13 Amp plug.To change a fuse in this type of
plug proceed as follows:
1.Remove fuse cover and fuse.
2.Fix new fuse which should be a BS1362 5 Amp,A.S.T.A.or BSI approved type.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a
value of 5 Amp. If a plug without a fuse is used, the fuse at the distr ibution board
should not be greater than 5 Amp.
Note: The severed plug must be disposed of to avoid a possible shock hazard should it
be inser ted into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code:blue = neutral (N),
brown = live (L).As these colour s may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured black.
• Connect the brown wire to the terminal marked L or coloured red.
• Do not connect either wire to the earth ter minal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the
sheath of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to 1972.
Loading...