Philips AJ 3600 Quick Start Guide
Clock Radio
QUICK START
INÍCIO RÁPIDO
AJ3600
Thanks for buying Philips AJ3600 clock radio.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!
3
S
DC 7.5V
A
4XAA/R6/UM3 1.5V
ENGLISH
Quick start as easy as ABC!
Step A
• Connect the supplied mains adapter to the set’s
7.5V DC jack and the plug into a wall outlet or
insert 4 batteries into the batter y compartment.
Step B
How to set the Clock & Alarm times
1. Check the radio is switched off.
2. Press and hold SET TIME/SET ALARM 1/
SET ALARM 2 .
3. Press and hold HOUR+/MINUTE+.
4. Press SET TIME/SET ALARM 1/SET ALARM 2.
Step C
Selecting the Alarm mode
Press briefly:
• AL1 once for radio
or /and
• AL2 once for buzzer
Helpful hints:
– If you have selected AL1 (AL ) , make sure you
have properly tuned to a station before turning off
the set (See TUNING TO RADIO STATIONS in the
user manual).
3 ways to switch off the alarm
• Either press briefly: ALARM RESET/SLEEP or
REPEAT ALARM/
• Press AL1 or AL2.
BRIGHTNESS CONTROL
.
B
S
1
E
T
M
R
A
A
L
L
A
E
T
S
1
-
E
5
R
A
R
P
M
T
E
2
S
1
2
M
I
N
+
U
R
3
5
T
U
E
O
+
H
4
E
S
E
M
I
T
T
C
Special feature:(See S)
Projection (Optimum: Within 2.5m)
With this projection feature, you can conveniently
project the clock time onto a surface e.g. walls,
ceiling.
1. Press PROJECTION ON/OFF to switch on.
2. Tu rn the Projection lens wheel (maximum
180º left or right) and also the set, if necessary, to
find a suitable projection surface.
Helpful hints:
– For longer projection time, please use the supplied
7.5V AC adapter to operate the set.
Loading...