Philips AC4558/31 user manual [zh]

Download

3000 059 82471

AC4558

1 2

EN User manual 1 ZH-T 使用手冊 21

27 28 29

2119

2220

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product Overview (g. a) 5 Controls overview (g. b) 5

3 Getting started 6

Installing the lter 6 Wi-Fi connection 6

4 Using the appliance 8

Understanding the air

quality light 8 Turning on and o 9 Changing the Auto mode

setting 10 Changing the fan speed 10 Using the light on/o function 11 Setting the child lock 11

5 Cleaning 12

Cleaning schedule 12 Cleaning the body of the

appliance 12 Cleaning the air quality sensor 12 Cleaning the pre-lter 13

7 Storage 15

8 Troubleshooting 16

9 Guarantee and service 19

Order parts or accessories 19

10 Notices 19

Electromagnetic elds (EMF) 19 Recycling 20 Notice 20

6 Replacing the air

purication lter 14

Understanding the healthy

air protect lock 14 Replacing the lter 14

1 Important

Safety

Read this user manual carefully before you use the appliance, and save it for future reference.

Danger

• Do not let water or any other liquid or ammable detergent enter the appliance to avoid electric shock and/or a re hazard.

• Do not clean the appliance with water, any other liquid, or a (ammable) detergent to avoid electric shock and/ or a re hazard.

• Do not spray any ammable materials such as insecticides or fragrance around the appliance.

Warning

• Check if the voltage indicated on the appliance corresponds to the local power voltage before you connect the appliance.

• If the power cord is damaged, you must have

it replaced by Philips, a service center authorized by Philips, or similarly qualied persons in order to avoid a hazard.

• Do not use the appliance if the plug, the power cord, or the appliance itself is damaged.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Child shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision.

• Do not block the air inlet and outlet, e.g. by placing items on the air outlet or in front of the air inlet.

• Make sure that foreign objects do not fall into the appliance through the air outlet.

English

• Standard WiFi interface based on 802.11b/g/n at

2.4 GHz with a maximum output power of 31.62 mW EIRP.

Caution

• This appliance is not a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking.

• If the power socket used to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure that you plug the appliance into a properly connected power socket.

• Always place and use the appliance on a dry, stable, level, and horizontal surface.

• Leave at least 20cm free space behind and on both sides of the appliance and leave at least 30cm free space above the appliance.

• Do not place anything on top of the appliance.

• Do not sit or stand on the appliance. Sitting or

standing on the appliance may lead to potential injuiry.

• Do not place the appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.

• Make sure all lters are properly installed before you switch on the appliance.

• Only use the original Philips lters specially intended for this appliance. Do not use any other lters.

• Combustion of the lter may cause inreversible human hazard and/or jeopardize other lives. Do not use the lter as fuel or for similar purpose.

• Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.

• Always lift or move the appliance by the handle on back side of the appliance.

• Do not insert your ngers or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance.

• Do not use this appliance when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes.

• Do not use the appliance near gas appliances, heating devices or replaces.

• Always unplug the appliance after use and before cleaning, or carrying out other maintenance or replacing the lters.

• Do not use the appliance in a room with major temperature changes, as this may cause condensation inside the appliance.

• To prevent interference, place the appliance at least 2 meters away from electrical appliances that use airborne radio waves

such as TVs, radios, and radio-controlled clocks.

• The appliance is only intended for household use under normal operating conditions.

• Do not use the appliance in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet, or kitchen.

• The appliance does not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.

• If you need to move the appliance, disconnect the appliance from the power supply rst.

• Do not move the appliance by pulling its power cord.

• Always cleanse your hands after changing the lters.

English

2 Your air purifier

Congratulations on your purchase, and welcome to Philips!

To fully benet from the support that Philips oers, register your product at www.philips.com/ welcome.

This appliance works with an air ltration system. Read this user manual carefully before you use the appliance, and save it for future reference.

Product Overview (g. a)

A Display panel

B Air quality light

NanoProtect lter Pro S3*

(FY4152)

D Pre-lter

E Front cover

F Air quality sensor

G Control buttons

Controls overview (g. b)

Control buttons

Power on/o button

Light on/o button

Auto mode button

Fan speed button

Reset button

Display panel:

Wi-Fi indicator

Gas display

PM2.5 display

Indoor Allergen Index

Filter replacement alert

Sleep mode

Pre-lter cleaning alert

Child lock indicator**

*Hereinafter referred to as "air purication lter".

**You can enable the child lock function through the Clean Home+ App.

3 Getting started

Installing the lter

7 To reattach the front cover,

mount the cover onto the bottom of the appliance rst (1). Then, gently push the top of the cover against the body of the appliance (2) (g. i).

Remove all packaging of the lter before using the appliance. Unpack them and place them into the appliance described as follows:

Note

• Make sure that you place the air purication lter in the appliance rst and then the prelter.

• Make sure that the side with the tag is pointing towards you when installing the lter.

1 Pull the top part of the front

cover to remove it from the appliance (g. c).

2 Press the two clips down and

pull the pre-lter towards you (g. d).

3 Remove the lter (g. e). 4 Remove all packaging materials

of the air purication lter (g. f).

5 Put the unpacked air

purication lter into the appliance (g. g).

6 Put the pre-lter back into the

appliance (g. h).

Note

Wi-Fi connection

Setting up the Wi-Fi connection for the rst time

1 Download and install the Philips

"Clean Home+" app from the App Store or Google Play.

2 Put the plug of the air purier in

the power socket and touch to turn on the air purier.

» The Wi-Fi indicator blinks

orange for the rst time.

3 Make sure that your smartphone

or tablet is successfully connected to your Wi-Fi network.

4 Launch the "Clean Home+" app

and click on "Connect a New Device" or press the "+" button

on the top of the screen. Follow the onscreen instructions to connect the air purier to your network.

• Make sure that all hooks of the pre-lte is properly attached to the purier.

English

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the troubleshooting section, or the help section in the "Clean Home+" App for extensive and up-to-date troubleshooting tips.

Note

• This instruction is only valid when the air purier is being set up for the rst time. If the network has changed or the setup needs to be performed again, consult section "Reset the Wi-Fi connection" on page 7.

• If you want to connect more than one air purier to your smartphone or tablet, you have to do this one by one. Complete the set up of one air purier before you turn on the other air purier.

• Make sure that the distance between your smartphone or tablet and the air purier is less than 10 m without any obstructions.

• This App supports the latest versions of Android and iOS. Please check www.philips.com/cleanhome for the latest update of supported operating systems and devices.

Reset the Wi-Fi connection

Note

• This applies when the default network to which your purier is connected has changed.

• Reset the Wi-Fi connection when your default network has changed.

1 Put the plug of the air purier in

the power socket and touch to turn on the air purier.

2 Touch and simultaneously

for 3 seconds until you hear a beep.

» The air purier goes to

pairing mode.

» The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting

up the Wi-Fi connection for the rst time" section.

4 Using the

appliance

Understanding the air quality light

Air quality light color

Blue Good

Blue-purple Fair

Purple-red Poor

Red Very poor

The air quality light automatically goes on when the air purier is switched on, and lights up all colors in sequence. After approximately 30 seconds, the air quality sensors select the color that corresponds to the surrounding air quality of airborne particles.

The color of the air quality light is determined by the highest level among PM2.5, Gas and IAI readings.

Air quality level

PM2.5

AeraSense sensing technology

accurately detects and quickly responds to even the slightest particle change in the air. It provides you with reassurance with real-time PM2.5 feedback.

Most of the indoor air pollutants fall under PM2.5 – which refers to airborne particle pollutants smaller than 2.5 micrometers. Common indoor sources of ne particles are tobacco smoke, cooking, burning candles. Some airborne bacteria and the smallest mold spores, pet allergen and dust mite allergen particles also fall under PM2.5.

PM2.5 level Air quality light

color

≤12 Blue

13-35 Blue-purple

36-55 Purple-red

>55 Red

GAS

With an advanced gas sensor, a display ranging from L1 to L4 shows the level change of potential harmful gases (incl. VOC, odor, etc.) detected. L1 indicates best air quality.

Gas level Air quality light

color

L1 Blue

L2 Blue-purple

L3 Purple-red

L4 Red

English

IAI

The professional-grade AeraSense sensor detects the level of indoor air allergen and with numerical feedback from 1 to 12 the potential risk level of indoor air allergens can be displayed. 1 indicates best air quality.

IAI level Air quality light

color

1-3 Blue

4-6 Blue-purple

7-9 Purple-red

10-12 Red

Turning on and o

Note

• Always place the air purier on a stable, horizontal, and level surface with the front of the unit facing away from walls or furniture.

• For optimum purication performance, close doors and windows.

• Keep curtains away from the air inlet or air outlet.

• Do not block the inlet or air outlet with clothing.

2 Touch the button to switch on

the appliance (g. j).

» The air purier operates

under the general mode by default.

» When the air purier is

warming up, " " displays on the screen.

» After 30 seconds, the air

purier shows the highest level among PM2.5/Gas/ IAI on the screen. The air quality sensor automatically selects the appropriate air quality light color (g. k).

3 Touch and hold the button for

3 seconds to switch o the air purier.

Note

• If the air purier stays connected to the electrical outlet after turning OFF, the air purier will operate under the previous settings when turned ON again.

1 Put the plug of the air purier in

the wall outlet.

» The air purier beeps. » All lights go on once and

then go out again.

Changing the Auto mode setting

You can choose 4 auto modes: the general mode, the Pollution mode, the Gas mode or the Allergen mode.

Auto general mode

The Auto general mode is designed to fast respond to even the slightest change in the air that automatically adjust fan speed to ensure optimal performance.

• Touch the Auto mode button to select Auto general mode (g. l).

» Auto ( ) displays on the

screen for 3 seconds.

» Then the screen shows the

hightest level among PM2.5/ Gas/IAI.

Auto pollution mode

The specially designed auto pollution mode responds to real time particle level and eectively remove airborne pollutants such as PM2.5 (g. m).

• Touch the Auto mode button

to select the Auto pollution

mode.

» Then the PM2.5 level

displays on the screen.

Auto Gas mode

The specially designed Auto Gas mode is designed to quickly remove indoor harmful gases such as formaldehyde, toluene, and maintain it at safe level (g. n).

• Touch the Auto mode button to select the Auto Gas mode.

» The Gas level displays on

the screen.

Auto allergen mode

The extra-sensitive Auto allergen mode is designed to react to even a small change in allergen levels in the surrounding air (g. o).

• Touch the Auto mode button to select the Auto allergen mode.

» The IAI level displays on the

screen.

Changing the fan speed

There are several fan speeds available.

When using the manual fan speed settings, the purier will still monitor the air quality, but it will not automatically adjust the fan speed if it detects changes in the air quality.

Sleep mode ( )

In sleep mode, the air purier operates quietly at a very low speed.

• Touch the fan speed button to select the sleep mode (g. p).

» The " " displays on the

screen for 3 seconds and then disappears.

» The sleep mode indicator

goes on.

» After 30 seconds, all the

icons are o, only the sleep mode indicator goes on.

+ 26 hidden pages

Philips AC4558/31 user manual [zh]

Specifications and Main Features

Frequently Asked Questions

User Manual