Philips AC4550-10 operation manual

I J K L M N

4241 211 04981

AC4550

1 2

EN User manual 1

FR Mode d’emploi 105

C D E

DA Brugervejledning 21

DE Benutzerhandbuch 40

ES Manual del usuario 63

FI Käyttöopas 85

IT Manuale utente 127

NL Gebruiksaanwijzing 149

NO Brukerhåndbok 172

SV Användarhandbok 192

27 28 29

2119

2220

English

Contents

1 Important 2

Safety 2

2 Your air purier 5

Product Overview (g. a) 5 Controls overview (g. b) 5

3 Getting started 6

Installing lters 6 Wi-Fi connection 6

4 Using the appliance 8

Understanding the air

quality light 8 Turning on and o 9 Changing the Auto mode

setting 9 Changing the fan speed 10 Using the light on/o function 11 Setting the child lock 11

5 Cleaning 12

Cleaning schedule 12 Cleaning the body of the

appliance 12 Cleaning the air quality sensor 12 Cleaning the pre-lter 13

8 Troubleshooting 16

9 Guarantee and service 19

Order parts or accessories 19

10 Notices 19

Electromagnetic elds (EMF) 19 Recycling 20 Notice 20 Simplied EU declaration of

conformity 20

6 Replacing the air

purication lters 14

Understanding the healthy

air protect lock 14 Replacing the lters 14

7 Storage 15

1EN

1 Important

Safety

Read this user manual carefully before you use the appliance, and save it for future reference.

Danger

• Do not let water or any

other liquid or ammable detergent enter the appliance to avoid electric shock and/or a re hazard.

• Do not clean the

appliance with water, any other liquid, or a (ammable) detergent to avoid electric shock and/ or a re hazard.

• Do not spray any

ammable materials such as insecticides or fragrance around the appliance.

Warning

• Check if the voltage

indicated on the appliance corresponds to the local power voltage before you connect the appliance.

• If the power cord is

damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualied persons in order to avoid a hazard.

• Do not use the appliance

if the plug, the power cord, or the appliance itself is damaged.

• This appliance can be

used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Child shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision.

• Do not block the air inlet

and outlet, e.g. by placing items on the air outlet or in front of the air inlet.

2 EN

English

• Make sure that foreign

objects do not fall into the appliance through the air outlet.

• Standard WiFi interface

based on 802.11b/g/n at

2.4 GHz with a maximum output power of 31.62 mW EIRP.

Caution

• This appliance is not

a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking.

• If the power socket used

to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure that you plug the appliance into a properly connected power socket.

• Always place and use the

appliance on a dry, stable, level, and horizontal surface.

• Leave at least 20cm free

space behind and on both sides of the appliance and leave at least 30cm free space above the appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or standing on the appliance may lead to potential injuiry.

• Do not place the

appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.

• Make sure all lters

are properly installed before you switch on the appliance.

• Only use the original

Philips lters specially intended for this appliance. Do not use any other lters.

• Combustion of the lter

may cause inreversible human hazard and/or jeopardize other lives. Do not use the lter as fuel or for similar purpose.

• Avoid knocking against

the appliance (the air inlet and outlet in particular) with hard objects.

3EN

• Always lift or move the

appliance by the handle on back side of the appliance.

• Do not insert your ngers

or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance.

• Do not use this appliance

when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes.

• Do not use the appliance

near gas appliances, heating devices or replaces.

• Always unplug the

appliance after use and before cleaning, or carrying out other maintenance or replacing the lters.

• Do not use the appliance

in a room with major temperature changes, as this may cause condensation inside the appliance.

• To prevent interference,

place the appliance at least 2 meters away from electrical appliances that use airborne radio waves such as TVs, radios, and radio-controlled clocks.

• The appliance is only

intended for household use under normal operating conditions.

• Do not use the appliance

in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet, or kitchen.

• The appliance does

not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.

• If you need to move the

appliance, disconnect the appliance from the power supply rst.

• Do not move the

appliance by pulling its power cord.

• Always cleanse your

hands after changing the lters.

4 EN

English

2 Your air purifier

Congratulations on your purchase, and welcome to Philips!

To fully benet from the support that Philips oers, register your product at www.philips.com/welcome.

Controls overview (g. b)

Control buttons

I Power on/o button

J Light on/o button

This appliance works with an air ltration system. Read this user manual carefully before you use the appliance, and save it for future reference.

Product Overview (g. a)

A Display panel

B Air quality light

NanoProtect lter Series 3*

(FY3433) NanoProtect lter Active

Carbon* (FY3432)

E Pre-lter

F Front cover

G Air quality sensor

H Control buttons

*Hereinafter referred to as "air purication lter".

K Auto mode button

L Fan speed button

M Child lock button

N Reset button

Display panel:

Wi-Fi indicator

Gas display

PM2.5 display

Indoor Allergen Index

Filter replacement alert

Sleep mode

Pre-lter cleaning alert

Child lock indicator

5EN

3 Getting started

Installing lters

7 To reattach the front cover,

mount the cover onto the bottom of the appliance rst (1). Then, gently push the top of the cover against the body of the appliance (2) (g. i).

Remove all packaging of the lters before using the appliance. Unpack them and place them into the appliance described as follows:

Note

• Make sure that you place the air purication lter in the appliance rst and then the prelter.

• Make sure that the side with the tag is pointing towards you when installing the lter.

1 Pull the top part of the front

cover to remove it from the appliance (g. c).

2 Press the two clips down and

pull the pre-lter towards you (g. d).

3 Remove all lters (g. e). 4 Remove all packaging materials

of the air purication lter (g. f).

5 Put the unpacked air purication

lter into the appliance (g. g).

6 Put the pre-lter back into the

appliance (g. h).

Note

• Make sure that all hooks of the pre-lte is properly attached to the purier.

Wi-Fi connection

Setting up the Wi-Fi connection for the rst time

1 Download and install the

"Air Matters" app from the App Store or Google play.

2 Put the plug of the air purier in

the power socket and touch to turn on the air purier.

» The Wi-Fi indicator blinks

orange for the rst time.

3 Make sure that your smartphone

or tablet is successfully connected to your Wi-Fi network.

4 Launch the "Air Matters" app

and click on "Connect an Air Purier or Monitor" on the top of the screen. Follow the onscreen instructions to connect the air purier to your network.

5 After the successful pairing and

connection, the Wi-Fi indicator

will light up white. If pairing

is not successful, consult the troubleshooting section, or the help section in the "Air Matters" App for extensive and up-todate troubleshooting tips.

6 EN

English

Note

• This instruction is only valid when the air purier is being set up for the rst time. If the network has changed or the setup needs to be performed again, consult section "Reset the Wi-Fi connection" on page 7.

• If you want to connect more than one air purier to your smartphone or tablet, you have to do this one by one. Complete the set up of one air purier before you turn on the other air purier.

• Make sure that the distance between your smartphone or tablet and the air purier is less than 10 m without any obstructions.

• This App supports the latest versions of Android and iOS. Please check www.philips.com/ purier-compatibility for the latest update of supported operating systems and devices.

Reset the Wi-Fi connection

Note

• This applies when the default network to which your purier is connected has changed.

• Reset the Wi-Fi connection when your default network has changed.

1 Put the plug of the air purier in

the power socket and touch to turn on the air purier.

2 Touch and simultaneously

for 3 seconds until you hear a beep.

» The air purier goes to

pairing mode.

» The Wi-Fi indicator blinks

orange.

3 Follow the steps 4-5 in "Setting

up the Wi-Fi connection for the rst time" section.

7EN

4 Using the

appliance

Understanding the air quality light

Air quality light color

Blue Good Blue-purple Fair Purple-red Poor Red Very poor

The air quality light automatically goes on when the air purier is switched on, and lights up all colors in sequence. After approximately 30 seconds, the air quality sensors select the color that corresponds to the surrounding air quality of airborne particles.

The color of the air quality light is determined by the highest level among PM2.5, Gas and IAI readings.

IAI

The professional-grade AeraSense sensor detects the level of indoor air allergen and with numerical feedback from 1 to 12 the potential risk level of indoor air allergens can be displayed. 1 indicates best air quality.

Air quality level

IAI level Air quality light

color

1-3 Blue 4-6 Blue-purple 7-9 Purple-red

10-12 Red

GAS

With an advanced gas sensor, a display ranging from L1 to L4 shows the level change of potential harmful gases (incl. VOC, odor, etc.) detected. L1 indicates best air quality.

Gas level Air quality light

color

L1 Blue L2 Blue-purple L3 Purple-red L4 Red

PM2.5

AeraSense sensing technology

accurately detects and quickly responds to even the slightest particle change in the air. It provides you with reassurance with real-time PM2.5 feedback.

Most of the indoor air pollutants fall under PM2.5 – which refers to airborne particle pollutants smaller than 2.5 micrometers. Common indoor sources of ne particles are tobacco smoke, cooking, burning candles. Some airborne bacteria and the smallest mold spores, pet allergen and dust mite allergen particles also fall under PM2.5.

8 EN

English

PM2.5 level Air quality light

color

≤12 Blue 13-35 Blue-purple 36-55 Purple-red >55 Red

Turning on and o

» After 30 seconds, the air

purier shows the highest level among IAI/Gas/PM2.5 on the screen. The air quality sensor automatically selects the appropriate air quality light color (g. k).

3 Touch and hold the button for

3 seconds to switch o the air purier.

Note

• Always place the air purier on a stable, horizontal, and level surface with the front of the unit facing away from walls or furniture.

• For optimum purication performance, close doors and windows.

• Keep curtains away from the air inlet or air outlet.

• Do not block the inlet or air outlet with clothing.

1 Put the plug of the air purier in

the wall outlet.

» The air purier beeps. » All lights go on once and

then go out again.

2 Touch the button to switch on

the appliance (g. j).

» The air purier operates

under the general mode by default.

» When the air purier is

warming up, " " displays on the screen.

Note

• If the air purier stays connected to the electrical outlet after turning OFF, the air purier will operate under the previous settings when turned ON again.

Changing the Auto mode setting

You can choose 4 auto modes: the general mode, the Allergen mode, the Gas mode or the Pollution mode.

Auto general mode

The Auto general mode is designed to fast respond to even the slightest change in the air that automatically adjust fan speed to ensure optimal performance.

• Touch the Auto mode button

to select Auto general mode (g. l).

» Auto ( ) displays on the

screen for 3 seconds.

» Then the screen shows the

hightest level among PM2.5/ Gas/IAI.

9EN

Auto allergen mode

The extra-sensitive Auto allergen mode is designed to react to even a small change in allergen levels in the surrounding air (g. m).

• Touch the Auto mode button

to select the Auto allergen mode.

» The IAI level displays on the

screen.

Auto Gas mode

The specially designed Auto Gas mode is designed to quickly remove indoor harmful gases such as formaldehyde (normally found in plywood), toluene (normally found in painting), carpet, natural gas, burning, cooking, air refresher, perfume and hair spray, cleaning agents, smoking, pesticide etc. and maintain it at safe level (g. n).

• Touch the Auto mode button

to select the Auto Gas mode.

» The Gas level displays on

the screen.

Changing the fan speed

There are several fan speeds available.

When using the manual fan speed settings, the purier will still monitor the air quality, but it will not automatically adjust the fan speed if it detects changes in the air quality.

Sleep mode ( )

In sleep mode, the air purier operates quietly at a very low speed.

• Touch the fan speed button to

select the sleep mode (g. p).

» The " " displays on the

screen for 3 seconds and then disappears.

» The sleep mode indicator

goes on.

» After 3 seconds, all the icons

are o, only the sleep mode indicator goes on.

Auto pollution mode

The specially designed auto pollution mode responds to real time particle level and eectively remove airborne pollutants such as PM2.5 (g. o).

• Touch the Auto mode button

to select the Auto pollution

mode.

» Then the PM2.5 level

displays on the screen.

10 EN

Manual

• Touch the fan speed button

repeatedly to select the fan speed you need (speed 1 or speed 2) (g. q):

» After 3 seconds, the display

shows the previous mode.

English

Tip

• If the air quality light lights up blue, it indicates that the air quality is good, and you can select a lower fan speed. On the other hand, if the air quality light lights up red-purple or red, it indicates that the air quality is unhealthy, and you can select a higher fan speed to purify the air more quickly.

Turbo(t)

In Turbo mode, the air purier operates on the highest speed.

• Touch the fan speed button to

select the Turbo mode ( ) (g. r).

» The " " displays on the

screen.

» After 3 seconds, the display

shows the previous mode.

Setting the child lock 1 Touch and hold the child lock

button for 3 seconds to activate child lock (g. u).

» The child lock icon

displays on the screen.

» When the child lock is on,

all the other buttons are not responsive.

2 Touch and hold the child lock

button for 3 seconds again to deactivate child lock.

» The child lock icon

disappears.

Note

• You can still control the appliance through the App even child lock is activated.

Using the light on/o function

With the light on/o button, you can switch on or o the air quality light, the display screen and the function indicator if desired.

1 Touch the light on/o button

once, the air quality light and all buttons will go o and the screen be dimmed (g. s).

2 Touch the light on/o button

again, all lights will be on again (g. t).

11EN

5 Cleaning

Cleaning the body of the appliance

Note

• Always unplug the appliance before you clean it.

• Never immerse the appliance in water or any other liquid.

• Never use abrasive, aggressive, or ammable cleaning agents such as bleach or alcohol to clean any part of the appliance.

• Only the pre-lter is washable. The air purier lter is not washable nor vacuum cleanable.

Cleaning schedule

Frequency Cleaning method

Wipe the surface of the appliance

When necessary

Every two months

When the prelter cleaning indicator lights up and F0 displays on the screen

with a soft dry cloth

Clean the air outlet cover

Clean the air quality sensor with a dry cotton swab

Clean the prelter

Regularly clean the inside and outside of the appliance to prevent dusts from collecting.

1 Wipe away dust with a soft

dry cloth from the body of the appliance.

Cleaning the air quality sensor

Clean the air quality sensor every two months for optimal functioning of the appliance. Clean it more frequently if you use the appliance in a dusty environment.

Note

• If the air purier is used in a dusty environment, it may need to be cleaned more often.

• If the humidity level in the room is very high, condensation may develop on the air quality sensor and the air quality light may indicate a more poor air quality even though the air quality is actually good. If this occurs, clean the air quality sensor or use the air purier on a manual speed setting.

1 Clean the inlet and outlet of

the air quality sensor with a soft brush (g. v).

12 EN

English

2 Remove the air quality sensor

cover (g. w).

3 Clean the air quality sensor,

the dust inlet and the dust outlet with a damp cotton swab (g. x).

4 Dry all parts thoroughly with a

dry cotton swab.

5 Reattach the air quality sensor

cover (g. y).

Cleaning the pre-lter

Clean the pre-lter when lights up and F0 is displayed on the screen (g. z).

1 Switch o the air purier and

unplug from the wall outlet.

2 Pull the top part of front cover

to remove it from the appliance (g. c).

3 Press the two clips down and

pull the pre-lter towards you (g. d).

4 If the pre-lter is very dirty, use

a soft brush to brush away the dust. Then wash the pre-lter under running tap water (g. {).

5 Allow the pre-lter to air dry

thoroughly before placing back in the air purier.

6 Put the pre-lter back into the

appliance (g. h).

Note

• Make sure that the pre-lters are completely dry before you put them back in the appliance. If they are still wet, bacteria may multiply in them and shorten the lifetime of the pre-lters.

7 To reattach the front cover,

mount the cover onto the bottom of the appliance rst (1). Then, gently push the top of the cover against the body of the appliance (2) (g. i).

8 Put the plug of the air purier in

the wall outlet.

9 Touch the button to switch on

the appliance.

10 Touch and hold the reset button

for 3 seconds to reset the

pre-lter cleaning time.

11 Wash your hands thoroughly

after installing lters.

13EN

6 Replacing the

air purification filters

Understanding the healthy air protect lock

This air purier is equipped with a lter replacement indicator to make sure that the air purication lter is in optimal condition when the air purier is operating. When the lters need to be replaced, the lter code displays on the screen and the lter replacement alert ( ) lights up red.

If the lters are not replaced in time, the air purier will stop operating and automatically lock to protect the air quality in the room. Replace the lters as soon as possible according to the lter code.

Replacing the lters

Note

• The air purication lters are not washable or reusable.

• Always turn o the air purier and unplug from the electrical outlet before replacing the lters.

• Do not clean the lters with a vacuum.

• If the pre-lter is damaged, worn or broken, do not use. Visit www.philips.com/support or contact the Consumer Care Center in your country.

Filter alert chart ( g. |)

Filter alert light status

A5 displays on the screen and the lter replacement alert goes on.

C7 displays on the screen and the lter replacement alert goes on.

A5 and C7 display on the screen alternately and the lter replacement alert

goes on.

Action

Replace the NanoProtect lter Series 3 (FY3433)

Replace the NanoProtect lter Active Carbon (FY3432)

Replace both lters

14 EN

English

1 Turn o the air purier and

unplug from the power socket.

2 Take out the used air lter

according to the lter alert light status displayed on the screen. Discard used lters (g. }).

Note

• Do not touch the pleated lter surface, or smell the lter as it has collected pollutants from the air.

3 Remove all packaging material of

the new lters (g. f).

4 Put the unpacked air

purication lters back into the appliance (g. g).

5 Put the plug of the air purier in

the power socket.

6 Touch the button to switch on

the appliance.

7 Touch and hold the reset button

for 3 seconds to reset the

lter lifetime counter.

7 Storage

1 Turn o the air purier and

unplug from the wall outlet.

2 Clean the air purier, air quality

sensor and pre-lter (see chapter ‘Cleaning’).

3 Let all parts air dry thoroughly

before storing.

4 Wrap the lters and pre-lter

separately in air tight plastic bags.

5 Store the air purier, lters and

pre-lters in a cool, dry location.

6 Always thoroughly wash hands

after handling lters.

Note

• Wash your hands after changing lters.

15EN

8 Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country.

Problem Possible solution

The appliance does not work even though it is plugged in.

The airow that comes out of the air outlet is signicantly weaker than before.

The air quality does not improve, even though the appliance has been operating for a long time.

The color of the air quality light always stays the same.

• Check if the top cover is properly installed.

• The lter replacement light has been on continuously

but you have not replaced the corresponding lter. As a result, the appliance is now locked. In this case, replace the lter and reset the lter lifetime counter.

• The pre-lter is dirty. Clean the pre-lter (see the

chapter "Cleaning").

• Check if the packing material is removed from the

lters.

• One of the lters has not been placed in the appliance.

Make sure that all lters are properly installed in the following order, starting with the innermost lter:

1) NanoProtect lter Series 3 (FY3433);

2) NanoProtect lter Active Carbon (FY3432);

3) pre-lter.

• The air quality sensor is wet. The humidity level in your

room is high and causes condensation. Make sure that the air quality sensor is clean and dry (see the chapter "Cleaning").

• The air quality sensor is dirty. Clean the air quality

sensor (see the chapter "Cleaning").

16 EN

English

Problem Possible solution

The appliance produces a strange smell.

The appliance is extra loud.

The appliance still indicates that I need to replace a lter, but I already did.

Error code "E1" displays on the screeen.

Error codes "E2", "E3", "E4" or "E5" displays on the screen.

• The rst few times you use the appliance, it may

produce a plastic smell. This is normal. However, if the appliance produces a burnt smell even if removing lters, contact your Philips dealer or an authorized Philips service center. The lter may produce smell after being used for a while because of the absorption of indoor gases. It’s recommended that you reactivate the lter by putting it in direct sunlight for repeated use. If odor still exists, replace the lter.

• If the appliance is too loud, you can change the fan

speed to a lower fan speed level. When using the appliance in a bedroom at night, choose the silent speed.

• Perhaps you did not reset the lter lifetime counter.

Switch on the appliance. Then touch and hold the reset button ( ) for 3 seconds.

• The motor has malfunctions. Contact the Consumer

Care Center in your country.

• The sensor has malfunctions. Contact the Consumer

Care Center in your country.

17EN

Problem Possible solution

• If the router your purier is connected to is dual –

band and currently it is not connecting to a 2.4GHz network, please switch to another band of the same router (2.4GHz) and try to pair your purier again. 5GHz networks are not supported.

• Web authentication networks are not supported.

• Check if the purier is within range of the Wi-Fi router.

You can try to locate the air purier closer to the Wi-Fi router.

• Check if the network name is correct. The network

name is case-sensitive. The Wi-Fi setup is not successful.

• Check if the Wi-Fi password is correct. The password is

case-sensitive.

• Retry the setup with the instructions in section ‘Set up

the Wi-Fi connection when the network has changed’.

• The Wi-Fi connectivity can be interrupted by

electromagnetic or other interferences. Keep the

appliance away from other electronic devices that may

cause interferences.

• Check if the mobile device is in airplane mode. Make

sure to have the airplane mode deactivated when

connecting to the Wi-Fi network.

• Consult the help section in the App for extensive and

up-to-date troubleshooting tips.

18 EN

English

9 Guarantee and

service

10 Notices

If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Center in your country (you can nd its phone number in the worldwide guarantee leaet). If there is no Consumer Care Center in your country, go to your local Philips dealer.

Order parts or accessories

If you have to replace a part or want to purchase an additional part, go to your Philips dealer or visit www.philips.com/support.

If you have problems obtaining the parts, please contact the Philips Consumer Care Center in your country (you can nd its phone number in the worldwide guarantee leaet).

Electromagnetic elds (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic elds.

Compliance with EMF

Koninklijke Philips N.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.

One of Philips' leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

Philips is committed to develop, produce and market products that cause no adverse health eects. Philips conrms that if its products are handled properly for their intended use, they are safe to use according to scientic evidence available today.

Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.

19EN

Recycling

This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).

Follow your country’s rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Notice

App Store is a service mark of Apple Inc.

Google Play is a trademark of Google Inc.

“Air Matters” app developed by Air Matters Network Pty Ltd.

This Philips appliance and Air Matters app applied multiple open source softwares, Copies of open source software license text used in this product can be derived from website: www.philips.com/puriercompatibility.

Simplied EU declaration of conformity

Hereby, Philips Consumer Lifestyle B.V. declares that the radio equipment type AC4550 is in compliance with Directive 2014/53/ EU.

The full text of the EU declaration of conformity is available at the following internet address: www.philips.com.

20 EN

Dansk

Indhold

1 Vigtigt 22

Sikkerhed 22

2 Din luftrenser 25

Produktoversigt (g. a) 25 Oversigt over knapper

(g. b) 25

3 Kom godt i gang 26

Montering af ltre 26 Wi-Fi-forbindelse 26

4 Sådan bruges apparatet 28

Forklaring af luftkvalitetslyset 28 Sådan tændes og slukkes

apparatet 29

Ændring af indstillingen

Automatisk tilstand 29 Ændring af blæserhastighed 30 Sådan bruger du lampens

tænd/sluk-funktion 31 Indstilling af børnesikring 31

5 Rengøring 32

Rengøringsskema 32 Rengøring af selve apparatet 32 Rengøring af

luftkvalitetssensoren 32 Rengøring af forlteret 33

7 Opbevaring 35

8 Fejlnding 36

9 Garanti og service 38

Bestilling af dele eller tilbehør 38

10 Bemærkninger 38

Elektromagnetiske felter

(EMF) 38 Genbrug 39 Meddelelse 39 Forenklede EU-overenss-

temmelseserklæring 39

6 Udskiftning af

luftrensningsltre 34

Sådan virker

beskyttelseslåsen til sund luft 34

Udskiftning af ltre 34

21DA

1 Vigtigt

Sikkerhed

Læs denne brugsvejledning omhyggeligt igennem, inden apparatet tages i brug, og gem den til eventuelt senere brug.

Fare

• Lad ikke vand eller andre

væsker eller brandbare rengøringsmidler komme i berøring med apparatet for at undgå elektrisk stød og/eller brandfare.

• Undlad at rengøre

apparatet med vand eller andre væsker eller (brandbart) rengøringsmiddel for at undgå elektrisk stød og/ eller brandfare.

• Sprøjt ikke brændbare

materialer som f.eks. insektgift eller parfume omkring apparatet.

Advarsel

• Kontrollér, om den

angivne netspænding på apparatet svarer til den lokale netspænding, før du slutter strøm til apparatet.

• Hvis netledningen

beskadiges, må den kun udskiftes af Philips, et autoriseret Philipsserviceværksted eller en tilsvarende kvaliceret fagmand for at undgå enhver risiko.

• Brug aldrig apparatet,

hvis netstik, netledning eller selve apparatet er beskadiget.

• Dette apparat kan

bruges af børn fra 8 år og opefter og personer med reducerede fysiske, sensoriske eller mentale evner eller manglende erfaring og viden, hvis de er blevet instrueret i sikker brug af apparatet og forstår de medfølgende risici. Lad ikke børn lege med apparatet. Rengøring og vedligeholdelse må ikke foretages af børn uden opsyn.

• Luftindtag og -udtag må

ikke blokeres, f.eks. ved at stille ting på luftudtaget eller foran luftindtaget.

• Sørg for, at

fremmedlegemer ikke

22 DA

Dansk

falder ind i apparatet gennem luftudgangen.

• Standard Wi-Fi-

grænseade baseret på 802.11b/g/n ved 2,4 GHz med en maksimal udgangseekt på 31,62 mW EIRP.

Forsigtig

• Apparatet kan ikke bruges

som erstatning for grundig udluftning, støvsugning eller brug af emhætte eller udsugning under madlavning.

• Hvis den anvendte

stikkontakt er dårlig, vil apparatets stik blive varmt. Sørg for, at du slutter apparatet til en ordentlig tilsluttet stikkontakt.

• Anbring og brug altid

apparatet på et stabilt, plant og vandret underlag.

• Der skal være mindst

20 cm fri plads bag ved og på begge sider af apparatet, og der skal være mindst 30 cm fri plads over apparatet.

• Placer ikke noget ovenpå

apparatet.

• Du må ikke sidde eller

stå på apparatet. Hvis du sidder eller står på apparatet, kan du komme til skade.

• Placer ikke apparatet

direkte under et klimaanlæg for at forhindre, at der drypper kondensvand på apparatet.

• Sørg for, at alle ltre er

installeret korrekt, inden apparatet tændes.

• Brug kun de originale

ltre fra Philips, der er særligt beregnede til dette apparat. Anvend ikke andre ltre.

• Afbrænding af lteret kan

forårsage alvorlig fare for mennesker og/eller bringe andres liv i fare. Brug ikke lteret som brændsel eller lignende formål.

• Undgå at støde mod

apparatet (særligt luftindtag og -udtag) med hårde genstande.

• Løft eller yt altid

apparatet i håndtaget på bagsiden af apparatet.

23DA

• Stik aldrig dine ngre

eller genstande ind i luftudtaget eller luftindtaget for at undgå fysiske skader eller funktionsfejl af apparatet.

• Brug ikke apparatet, når

du har anvendt et indendørs, rygende insektmiddel, eller på steder med olierester, brændende røgelse eller kemiske dampe.

• Brug ikke apparatet

i nærheden af gasapparater, varmeapparater eller brændeovne/ kaminer.

• Tag altid stikket ud af

stikkontakten efter brug og før rengøring eller anden vedligeholdelse eller efter udskiftning af ltrene.

• Brug ikke apparatet

i rum med store temperatursvingninger, da det kan skabe kondens inde i apparatet.

• Undgå interferens ved at

placere apparatet mindst 2 meter fra elektriske apparater med luftbårne

radiobølger, f.eks. TV, radio og radiostyrede ure.

• Apparatet er kun beregnet

til husholdningsbrug under normale driftsforhold.

• Brug ikke apparatet i våde

omgivelser eller ved høje rumtemperaturer, f.eks. bad, toilet eller køkken.

• Apparatet fjerner ikke

kulilte (CO) eller radon (Rn). Det kan ikke bruges som en sikkerhedsenhed i tilfælde af ulykker med forbrændingsprocesser og farlige kemikalier.

• Hvis du skal ytte

apparatet, skal du først frakoble apparatet fra strømforsyningen.

• Flyt ikke apparatet ved at

trække i netledningen.

• Rens altid hænderne efter

udskiftning af ltrene.

24 DA

Dansk

2 Din luftrenser

Tillykke med dit køb, og velkommen til Philips!

For at få fuldt udbytte af den støtte, Philips tilbyder, skal du registrere dit produkt på www.philips.com/ welcome.

Dette apparat er designet til at fungere med et luftltreringssystem. Læs denne brugsvejledning omhyggeligt igennem, inden apparatet tages i brug, og gem den til eventuelt senere brug.

Oversigt over knapper (g. b)

Betjeningsknapper

I On/o-knap

J Knap til lys til/fra

K Knap til automatisk tilstand

L Blæserhastighedsknap

M Børnesikringsknap

N Nulstillingsknap

Produktoversigt (g. a)

A Skærmpanel

B Luftkvalitetslys

NanoProtect-lter i 3-serien*

(FY3433) NanoProtect-lteret Aktivt

kulstof* (FY3432)

E Forlter

F Frontdæksel

G Sensor til luftkvalitet

H Betjeningsknapper

* Herefter kaldet "luftrensningslter".

Skærmpanel:

Wi-Fi-indikator

Gasdisplay

PM2.5-display

Indeks - allergener inde

Advarsel for udskiftning af lter

Sleep-tilstand

Alarm for rengøring af forlter

Børnesikringsindikator

25DA

3 Kom godt i gang

Montering af ltre

7 Når du skal sætte frontdækslet

på igen, skal dækslet først sættes på bunden af apparatet (1). Skub derefter forsigtigt toppen af dækslet ind mod apparatets kabinet (2) (g. i).

Fjern al lterets emballage, før apparatet tages i brug. Pak dem ud, og sæt dem i apparatet som beskrevet efterfølgende:

Bemærk

• Sørg for at placere luftrensningslteret i apparatet først og derefter forlteret.

• Sørg for, at siden med etiketten vender mod dig selv, når lteret monteres.

1 Træk i den nederste del af

frontdækslet for at fjerne det fra apparatet (g. c).

2 Tryk de to klemmer ned, og

træk forlteret ind mod dig selv (g. d).

3 Fjern alle ltre (g. e). 4 Fjern al emballage fra

luftrensningslteret (g. f).

5 Læg de udpakkede

luftrensningsltre tilbage i apparatet (g. g).

6 Sæt forlteret tilbage i apparatet

(g. h).

Bemærk

• Sørg for, at alle kroge på forlteret er placeret korrekt i luftrenseren.

26 DA

Wi-Fi-forbindelse

Opsætning af Wi-Fiforbindelsen første gang

1 Download og installer appen

"Air Matters" fra App Store eller Google Play.

2 Sæt stikket til luftrenseren i

stikkontakten, og tryk på for at tænde for luftrenseren.

» Wi-Fi-indikatoren blinker

orange den første gang.

3 Kontroller, at din smartphone

eller tablet har oprettet forbindelse til dit Wi-Fi-netværk.

4 Åbn appen "Air Matters",

og klik på "Connect an Air Purier or Monitor" øverst på skærmbilledet. Følg instruktionerne på skærmen for at tilslutte luftrenseren til dit netværk.

5 Efter parring og forbindelse er

oprettet, lyser Wi-Fi-indikatoren

hvidt. Hvis parringen ikke

lykkes, skal du se afsnittet om fejlnding eller afsnittet Hjælp i appen "Air Matters" for at nde omfattende og opdaterede tip til fejlnding.

Dansk

Bemærk

• Denne vejledning gælder kun, når luftrenseren opsættes første gang. Hvis netværket er ændret, eller opsætningen skal foretages igen, skal du se afsnittet "Genindstil Wi-Fi-forbindelsen" på side 27.

• Hvis du vil slutte mere end én luftrenser til din smartphone eller tablet, skal du gøre det en ad gangen. Fuldfør opsætningen af én luftrenser, før du tænder den næste luftrenser.

• Sørg for, at afstanden mellem din smartphone/tablet og luftrenseren er mindre end 10 m uden forhindringer.

• Denne app understøtter de nyeste versioner af Android og iOS. Gå til www.philips.com/ purier-compatibility for at få de seneste oplysninger om understøttede operativsystemer og enheder.

Genindstil Wi-Fi-forbindelsen

Bemærk

• Dette gælder, når standardnetværket, som luftrenseren er tilsluttet, er ændret.

• Nulstil Wi-Fi-forbindelsen, når dit standardnetværk er ændret.

1 Sæt stikket til luftrenseren i

stikkontakten, og tryk på for at tænde for luftrenseren.

2 Tryk på og samtidigt i 3

sekunder, indtil der lyder et bip.

» Luftrenseren skifter til

parringstilstand.

» Wi-Fi-indikatoren blinker

orange.

3 Følg trin 4-5 i afsnittet

"Opsætning af Wi-Fiforbindelsen første gang".

27DA

4 Sådan bruges

apparatet

Forklaring af luftkvalitetslyset

IAI-niveau Luftkvalitetsly-

sets farve

1-3 Blå 4-6 Blå-lilla 7-9 Lilla-rød 10-12 Rød

Luftkvalitetslysets farve

Blå God Blå-lilla Middel Lilla-rød Ringe Rød Meget dårlig

Luftkvalitetslyset tænder automatisk, når luftrenseren tændes, og tænder alle farver i rækkefølge. Efter ca. 30 sekunder vælger luftkvalitetssensorerne den farve, som svarer til den omgivende luftkvalitet af luftbårne partikler.

Farven på luftkvalitetslyset bestemmes af det højeste niveau for PM2.5-, gas- and IAIaæsninger.

Luftkvalitetsniveau

IAI

Den professionelle sensor AeraSense registrerer det indendørs luftallergenniveau og kan angive risikograden for indendørs luftallergener på en numerisk skala fra 1 til 12. 1 angiver bedste luftkvalitet.

GAS

Med en avanceret gassensor angiver displayet på en skala fra L1 til L4 niveauet for potentielt skadelige luftarters massefylde (inkl. VOC, lugt osv.). L1 angiver bedste luftkvalitet.

Gasniveau Luftkvalitetsly-

sets farve

L1 Blå L2 Blå-lilla L3 Lilla-rød L4 Rød

PM2.5

AeraSense-detekteringsteknologi registrerer nøjagtigt og reagerer hurtigt på selv den mindste partikelændring i luften. Det giver

dig tryghed med PM2.5-feedback i realtid.

De este indendørs forureningskilder hører ind under PM2.5, som refererer til luftforureningsstoer mindre end 2.5 mikrometer. Almindelige indendørs kilder til ne partikler er tobaksrøg, madlavning, brændende stearinlys. Nogle luftbårne bakterier og de mindste mugsporer, PET-allergener og støvmideallergenpartikler hører også ind under PM2.5.

28 DA

+ 184 hidden pages