Philips AC4076/80 user manual
Always there to help you
Question?
Contact
Philips
Register your product and get support at
www.philips.com/welcome
AC4076
EN
User Manual 2
ZH-TW 使用手冊
20
1
清潔濾網
清潔濾網
更換濾網
更換濾網
4 ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
With this air purier with advanced highly effective German ltration
technology, you breathe cleaner air in your home. For the best result, place
the air purier in a room where you spend most of your time, e.g. your
bedroom, living room, or children’s room.
There are many pollution sources. In a home, there can be high
condensation of formaldehyde and other harmful gases coming from
furniture, paints and smoking, and .etc. Because these harmful pollutants
can be invisible and odorless, they can affect your health. The Philips air
purier lters off these harmful gases quickly and effectively. Furthermore,
it can also lter out pollutants such as pollens pm2.5 and bacteria, airborne
particles that can affect your well-being. With our air purier, it improves
the air quality and ensures you and your family members breathe cleaner
air at your home.
Filtration in a professional and credible way
The air purier has all-in-one formaldehyde removal lter that ensures the
best air quality in your home:
- Stage 1: The pre-lter has been treated with antibacterial substances. It
catches big particles like human hair, pet hair .etc.
- Stage 2: The formaldehyde removal lter effectively removes
formaldehyde, odors, pm2.5, pollen, bacteria, and other volatile organic
compounds (VOCs).
General description (Fig. 1)
A Air quality light ring
B Fan speed indicator
C Air quality sensor outlet
D Air quality sensor
E Air quality sensor inlet
F Handle
G Air outlet
H Air inlet
I Cord storage facility
J Mains cord
K Control panel
1 Light sensor for night mode
2 AIR QUALITY on/off button with light
3 Power on/off button
4 SILENT button with light
5 Power-on button with light
6 FAN SPEED button with light
7 AUTO button with light
8 Fan speed lights (1, 2, 3 and boost power)/lter replacement lights
9 FAN SPEED indications
10 REPLACE FILTER indications
L Filter 2: Formaldehyde removal lter AC4147
M Filter 1: pre-lter
N Front panel
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Do not let water or any other liquid or ammable detergent enter the
appliance to avoid electric shock and/or a re hazard.
- Do not clean the appliance with water or any other liquid or a
(ammable) detergent to avoid electric shock and/or a re hazard.
Warning
- Check if the voltage indicated on the bottom of the appliance
corresponds to the local mains voltage before you connect the
appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged.
- This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and maintenance shall not be made by children
without supervision.
- Do not block the air inlet and outlet, e.g. by placing items on the air
outlet or in front of the air inlet.
Caution
- This appliance is not a substitute for proper ventilation, regular vacuum
cleaning or use of an extractor hood or fan while cooking.
- If the wall socket used to power the appliance has poor connections,
the plug of the appliance becomes hot. Make sure you plug the
appliance into a properly connected wall socket.
- Always place and use the appliance on a dry, stable, level and horizontal
surface.
- Leave at least 20cm free space behind and on both sides of the
appliance and leave at least 30cm free space above the appliance.
- Do not place anything on top of the appliance and do not sit on the
appliance.
- Do not place the appliance directly below an air conditioner to prevent
condensation from dripping onto the appliance.
- Make sure all lters are properly installed before you switch on the
appliance.
5English
6 English
- Only use the original Philips lters specially intended for this appliance.
Do not use any other lters.
- Avoid knocking against the appliance (the air inlet and outlet in
particular) with hard objects.
- Always lift or move the appliance by the handle at the back of the
appliance.
- Do not insert your ngers or objects into the air outlet.
- Do not use this appliance when you have used indoor smoke-type
insect repellents or in places with oily residues, burning incense or
chemical fumes.
- Do not use the appliance near gas appliances, heating devices or
replaces.
- Always unplug the appliance after use and before you clean it.
- Do not use the appliance in a room with major temperature changes,
as this may cause condensation inside the appliance.
- The appliance is only intended for household use under normal
operating conditions.
- Do not use the appliance in wet surroundings or in surroundings with
high ambient temperatures, such as the bathroom, toilet or kitchen.
- The appliance does not remove carbon monoxide (CO) or radon
(Rn). It cannot be used as a safety device in case of accidents with
combustion processes and hazardous chemicals.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
Before rst use
Placing the lters
The appliance comes with all lters tted inside, but you have to remove
the packaging of the lters before you can use the appliance. Remove all
lters, unpack them and place them back into the appliance as described
below.
Tip: Place the appliance against a wall for more stability when you remove or
insert lters.
Note: Make sure you insert the lters in the correct position.
1 Place your ngers in the recesses of the side panels and gently pull
the top part of the front panel towards you. Then lift the hooks at the
bottom of the panel out of the bottom of the appliance.
2 Take out the new lter from the packaging material.
3 Put lter 2 (Formaldehyde removal lter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
4 Place lter 1 (pre-lter) in the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
7English
5 To reattach the front panel, insert the bottom hooks into the bottom
2
1
of the appliance rst (1). Then push the panel against the body of the
appliance (2).
Using the appliance
1 Put the plug in the wall socket
All lights go on twice and you hear a beep. Then the lights go out again.
2 Press the on/off button to switch on the appliance.
8 English
The power-on light, the AUTO light, and the AIR QUALITY light on the
control panel go on.
ᴪᨑ☴㏨
▊☴㏨
The air quality light ring shows the quality of the air.
Air quality indication
Colour Air quality
Blue Very good
Deep purple Good
Purple Fair
Red Bad
▊☴㏨
To switch off the air quality light ring, press the AIR QUALITY button.
Note: The air quality light ring automatically goes on when the appliance is
switched on.
The appliance automatically star ts operating in the AUTO mode.
To switch off the appliance, press the on/off button again and unplug the
appliance.
Note: When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the AIR QUALITY
light on the control panel and the air quality light ring may indicate that the
air quality is bad even though the air quality is good. In this case, the auto
mode causes the appliance to run at high fan speed. You can solve this by
cleaning the air quality sensor. If condensation develops frequently during
periods of high humidity, we advise you to use one of the manual speed
settings.
Fan speed lights/lter replacement lights
- The lights on the right-hand side of the control panel have a dual
function: they either indicate the fan speed or they indicate that the
ᴪᨑ☴㏨
lters should be replaced or cleaned.
- When lights 1 to 2 light up continuously, they indicate the current fan
speed.
- When light 1 ashes, you have to clean the pre-lter. When lights 2
ashes, you have to replace the formaldehyde removal lter.
- When light 2 and the REPLACE FILTER light are ashing continuously,
the formaldehyde removal lter have to replace, and the appliance is
locked (see chapter ‘Filter replacement lock’ for more information).
Adjusting the air quality sensor sensitivity
People with certain health problems (e.g. allergies or asthma) have a
greater need for healthy air. For this reason, the appliance allows you to
adjust the sensitivity of the air quality sensor. If you set it to higher sensitivity
level, the appliance star ts cleaning the air at lower pollution level.
There are 3 sensitivity levels:
- standard
- sensitive
- extra sensitive
The pollution sensor is set to standard sensitivity by default. You can adjust
the sensitivity of the air quality sensor in the following way:
1 If the appliance is already plugged in, unplug the appliance and wait for
a few minutes.
2 Press the AIR QUALITY button and simultaneously put the mains plug
in the wall socket.
The appliance beeps twice and one of the fan speed lights ashes to
show the current sensitivity level of the air quality sensor.
9English
Sensitivity level:
Fan speed light Sensitivity level
Extra sensitive
Sensitive
Standard
3 Press the FAN SPEED button to adjust the sensitivity level of the air
quality sensor.
One of the fan speed lights ashes to show the set sensitivity level of
the air quality sensor.
ᴪᨑ☴㏨
▊☴㏨
4 Press the on/off button to switch off the appliance.
Note: When you change the sensitivity level, the appliance automatically starts
operating at the set sensitivity level whenever you switch on the appliance.
Auto mode
When the appliance is switched on, the built-in air quality sensor
automatically measures the ambient air quality. When the auto mode is
10 English
▊☴㏨
▊☴㏨
ᴪᨑ☴㏨
ᴪᨑ☴㏨
activated, the appliance selects the most appropriate fan speed for the
measured air quality.
1 Press the on/off button to switch on the appliance.
2 Press the AUTO button to activate the auto mode.
Note: When the appliance is operating in another mode and you want to
activate the auto mode, simply press the AUTO button.
The AUTO light goes on.
The FAN SPEED light indicates at which fan speed the appliance is
operating.
Note: When the air quality is very good and the appliance operates at a very
low fan speed, the FAN SPEED light for the lowest speed setting does not go
on. In this case only the power-on light and the AUTO light are on.
Note: The built-in air quality sensor measures the air quality and automatically
selects the appropriate speed setting to ensure the best possible air quality in
your room. When the air is clean, the appliance stops running. When the air
quality deteriorates, the appliance starts running at a low fan speed and noise
level so that the energy consumption is minimised.
Night mode
The appliance works in harmony with its surroundings. In auto mode, the
appliance automatically switches to night mode when the room in
which it is operating becomes dark. When the room has been dark for
3 minutes, the lights of the appliance go out, the fan speed and noise
level are reduced and the energy consumption is minimised. If the room
becomes bright again for 5 minutes or longer, the appliance resumes
normal operation.
In night mode, the automatic control is still active. If the air is clean, the
lights and the fan are off. If the air quality deteriorates, the appliance is
activated and the lights and the fan come on again.
Note: The night mode only works when the appliance is operating in the auto
mode.
▊☴㏨
Fan speed
If you do not use the auto mode, you can select the desired fan speed
yourself.
1 Press the on/off button to switch on the appliance.
2 Press the FAN SPEED button one or more times to select the desired
ᴪᨑ☴㏨
fan speed.
The corresponding fan speed light and the indications above the lights
show the set fan speed (
, , or ).
The corresponding fan speed light in the fan speed indicator goes on.
11English
▊☴㏨
▊☴㏨
ᴪᨑ☴㏨
ᴪᨑ☴㏨
Note: Select boost power (
) if you need an extra strong airow when the air
in the room is very dirty. Lights to light go on.
Silent mode
When you use the appliance in silent mode, it operates very quietly.
1 Press the on/off button to switch on the appliance.
2 Press the SILENT button to activate the silent mode.
The SILENT light goes on.
If you want to go back to the FAN SPEED mode or AUTO mode, simply
press the FAN SPEED or AUTO button.
Cleaning
Always unplug the appliance before you clean it.
Never immerse the appliance in water or any other liquid.
Never use aggressive or ammable cleaning agents such as bleach or
alcohol to clean any part of the appliance.
Only the pre-lter is washable.
Body of the appliance
Regularly clean the inside and outside of the body to prevent dust from
collecting on the inside and outside.
1 Wipe away dust with a soft dry cloth from the body of the appliance.
2 Clean the air inlet and the air outlet with a soft dry cloth.
Loading...