Philips AC3256 User Manual [ru]

AC3256

Question?

Contact

Philips

User manual 3

Қолданушының нұсқасы 24

Руководство пользователя 45

Always there to help you

www.philips.com/welcome

English

Table of contents

1 Important 4

Safety 4

2 Your air purier 7

Product overview 7 Controls overview 8

3 Getting started 9

Install lter 9

4 Using the appliance 10

Understand the air quality

light 10 Switch on and o 10 Change the fan speed 11 Set the timer 12 Set the child lock 12 Use the light on/o function 13

5 Cleaning 13

Cleaning schedule 13 Clean the body of the

appliance 13 Clean the air quality sensor 14 Clean the pre-lter 14

7 Troubleshooting 20

8 Guarantee and service 22

Order parts or accessories 22

9 Notices 22

Electromagnetic elds (EMF) 22 Recycling 23 Noise level 23

6 Replacing the lter 16

Understand the healthy air

protect lock 16 Replace the lter 16 Filter force reset 17 Filter type change 18

3EN

1 Important

Safety

Read this user manual carefully before you use the appliance, and save it for future reference.

Danger

• Do not let water or any

other liquid or flammable detergent enter the appliance to avoid electric shock and/or a fire hazard.

• Do not clean the

appliance with water, any other liquid, or a (flammable) detergent to avoid electric shock and/ or a fire hazard.

• Do not spray any

flammable materials such as insecticides or fragrance around the appliance.

Warning

• Check if the voltage

indicated on the appliance corresponds to the local power voltage before you connect the appliance.

• If the power cord is

damaged, you must have it replaced by Philips, a service center authorized by Philips, or similarly qualified persons in order to avoid a hazard.

• Do not use the appliance

if the plug, the power cord, or the appliance itself is damaged.

• This appliance can be

used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Child shall not play with the appliance. Cleaning and maintenance shall not be made by children without supervision.

• Do not block the air inlet

and outlet, e.g. by placing items on the air outlet or in front of the air inlet.

4 EN

English

• Make sure that foreign

objects do not fall into the appliance through the air outlet.

Caution

• This appliance is not

a substitute for proper ventilation, regular vacuum cleaning, or use of an extractor hood or fan while cooking.

• If the power socket used

to power the appliance has poor connections, the plug of the appliance becomes hot. Make sure that you plug the appliance into a properly connected power socket.

• Always place and use the

appliance on a dry, stable, level, and horizontal surface.

• Leave at least 20cm free

space behind and on both sides of the appliance and leave at least 30cm free space above the appliance.

• Do not place anything on

top of the appliance.

• Do not sit or stand on

the appliance. Sitting or standing on the appliance may lead to potential injuiry.

• Do not place the

appliance directly below an air conditioner to prevent condensation from dripping onto the appliance.

• Make sure all filters

are properly installed before you switch on the appliance.

• Only use the original

Philips filters specially intended for this appliance. Do not use any other filters.

• Combustion of the filter

may cause inreversible human hazard and/or jeopardize other lives . Do not use the filter as fuel or for similar purpose.

• Avoid knocking against

the appliance (the air inlet and outlet in particular) with hard objects.

• Always lift or move the

appliance by the handle on top of the appliance.

5EN

• Do not insert your fingers

or objects into the air outlet or the air inlet to prevent physical injury or malfunctioning of the appliance.

• Do not use this appliance

when you have used indoor smoke-type insect repellents or in places with oily residues, burning incense, or chemical fumes.

• Do not use the appliance

near gas appliances, heating devices or fireplaces.

• Always unplug the

appliance after use and before cleaning or carrying out other maintenance.

• Do not use the appliance

in a room with major temperature changes, as this may cause condensation inside the appliance.

• To prevent interference,

place the appliance at least 2 meters away from electrical appliances that use airborne radio waves

such as TVs, radios, and radio-controlled clocks.

• The appliance is only

intended for household use under normal operating conditions.

• Do not use the appliance

in wet surroundings or in surroundings with high ambient temperatures, such as the bathroom, toilet, or kitchen.

• The appliance does

not remove carbon monoxide (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals.

• If you need to move the

appliance, disconnect the appliance from the power supply first.

• Do not move the

appliance by pulling its power cord.

6 EN

English

2 Your air purifier

FDC

Congratulations on your purchase, and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Product overview

A Control panel

B Air quality light

C Air quality sensors

NanoProtect S3 filter HEPA*

(FY3433)

E NanoProtect AC filter* (FY3432)

F Pre-filter

G Front panel

* Hereinafter referred to as air purification filter

7EN

Controls overview

H On/Off button

I Child lock button

J Light on/off button

K Display screen

L Fan speed button

M Timer button

N Reset button

H J K L M NI

8 EN

English

3 Getting started

3 Press the two clips down and pull

the pre-filter towards you.

Install lter

Before using the appliance, remove all packaging materials of the filters and place the filter into the appliance as described below.

Note

• Make sure that the side with the tag is

pointing towards you.

1 Remove all packaging materials of

the air purification filters.

2 Pull the bottom part of the front

panel to remove it from the appliance.

4 Put the unpacked air purification

filters back into the appliance.

Note

• Put the thick filter in the appliance first,

and then the thinner filter.

5 Put the pre-filter back into the

appliance.

9EN

Note

• Make sure that the side with the two

clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier.

4 Using the

appliance

6 To reattach the front panel, mount

the panel onto the top of the appliance first (1). Then, gently push the panel against the body of the appliance (2).

Understand the air quality light

Air quality light color

Blue Good

Blue-violet Fair

Red-purple Unhealthy

Red Very unhealthy

The air quality light automatically goes on when the appliance is switched on, and lights up all colors in sequence. In a short time the air quality sensors select the color that corresponds to the ambient air quality.

Air quality level

Switch on and o

Put the plug of the appliance in the

power socket.

2 Touch to switch on the

appliance.

» The appliance operates under

the auto mode by default.

10 EN

English

» After measuring the air quality

for a short time, the air quality sensor automatically selects the color of the air quality light.

» After measuring the particle

matters in the air, the appliance shows the PM2.5 level on the screen.

3 Touch and hold for 3 seconds to

switch off the appliance.

Note

• After the appliance is switched off by

the on/off button in the power socket, the appliance will operate under the previous settings when it is switched on again.

, if the plug is still

Allergen mode

The specially designed allergen mode can effectively remove common allergens such as pollen, pet dander and dust mite etc.

• Touch the fan speed button select the allergen mode (AL).

Change the fan speed

There are several fan speeds available. You can choose the auto mode, allergen mode, speed 1, 2, 3, 4 or 5.

Auto (A)

In auto mode, the appliance selects the fan speed according to the ambient air quality.

• Touch the fan speed button select auto (A).

Sleep mode

In sleep mode, the appliance operates quietly under speed 1. One minute after the sleep mode is selected, the power and light on/off indicators are dimmed, and all the other lights are off.

• Touch the fan speed button select the sleep mode (speed 1).

11EN

Manual

• Touch the fan speed button

repeatedly to select the fan speed you need.

Set the timer

Set the child lock

Touch and hold the child lock

button child lock.

» "L" displays on the screen for

» When the child lock is on,

for 3 seconds to activate

3 seconds.

all the other buttons are not responsive.

With the timer, you can let the appliance operate for a set number of hours. When the set time has elapsed, the appliance will automatically switch off.

• Touch the timer button repeatedly to choose the number of hours you want the appliance to operate.

» The timer is available from 1 to

24 hours.

To deactivate the timer, touch the timer button on the screen.

repeatedly until displays

2 Touch and hold the child lock

button deactivate child lock.

» "UL" displays on the screen for

for 3 seconds again to

3 seconds.

12 EN

English

Use the light on/o function

5 Cleaning

With the light on/off button, you can switch on or off the air quality light, the display screen and the function indicators if needed.

1 Touch the light on/off button

once, the air quality light will go out.

2 Touch the light on/off button

again, the display screen and the function indicators will go out. The power on/off

indicators will still be on, but the

lights will be dimmed.

and light on/off

3 Touch the light on/off button for

the third time, all lights will be on again.

Note

• Always unplug the appliance before

cleaning.

• Never immerse the appliance in water

or any other liquid.

• Never use abrasive, aggressive, or

flammable cleaning agents such as bleach or alcohol to clean any part of the appliance.

• Only the pre-filter is washable. The air

purification filter is not washable nor vacuum cleanable.

Cleaning schedule

Frequency Cleaning method

Wipe the surface

When necessary

When F0 displays on the screen

Every two months

of the appliance with a soft dry cloth

Clean the prefilter

Clean the air quality sensors

Clean the body of the appliance

Regularly clean the inside and outside of the appliance to prevent dust from collecting.

1 Wipe away dust with a soft dry cloth

from the body of the appliance.

2 Clean the air outlet with a soft dry

cloth.

13EN

Clean the air quality sensor

Clean the air quality sensor every 2 months for optimal functioning of the purifier. Clean them more frequently if you use the purifier in a dusty environment.

Note

• When the humidity level in the

room is very high, it is possible that condensation develops on the air quality sensor. As a result, the air quality light may indicate that the air quality is bad even though it is good. In this case you have to clean the air quality sensor or use one of the manual speed settings.

1 Clean the air quality sensor inlet

and outlet with a soft brush.

3 Clean the air quality sensor, the

dust inlet and the dust outlet with a lightly moistened cotton swab.

4 Dry them with a dry cotton swab. 5 Reattach the air quality sensor

cover.

2 Remove the air quality sensor cover.

14 EN

Clean the pre-lter

Filter alert light status

F0 displays on the

screen

Follow this

Clean the prefilter

English

1 Pull the bottom part of the front

panel to remove it from the appliance.

2 Press the two clips down and pull

the pre-filter towards you.

Note

• Make sure that the pre-filter is

completely dry. If it is still wet, bacteria may multiply in it and shorten the lifetime of the pre-filter.

5 Put the pre-filter back into the

appliance.

Note

• Make sure that the side with the two

clips is pointing towards you, and that all hooks of the pre-filter are properly attached to the purifier.

3 Wash the pre-filter under a running

tap. If the pre-filter is very dirty, use a soft brush to brush away the dust.

4 Air dry the pre-filter.

6 To reattach the front panel, mount

the panel onto the top of the appliance first (1). Then, gently push the panel against the body of the appliance (2)

15EN

7 Touch and hold the reset button

for 3 seconds to reset the pre-filter cleaning time.

6 Replacing the

filter

Understand the healthy air protect lock

This appliance is equipped with the healthy air protect lock to make sure that the air purification filters are in optimal condition when the appliance is operating. When the filters are almost expired, the filter code displays on the screen to indicate that you need to replace the filters.

If the filters are not replaced in 14 days, the appliance will stop operating and get locked.

Replace the lter

Note

• The air purification filters are not

washable nor vacuum cleanable.

Filter alert light status

A3 displays on the screen

C7 displays on the screen

A3 and C7 display on the screen alternately

Follow this

Replace NanoProtect S3 filter HEPA

Replace the NanoProtect AC filter

Replace both filters

16 EN

English

1 Take out the expired air purification

filter according to the filter code displayed on the screen, and gently put the expired filter into the trash bin.

3 Place the new filter into the

appliance.

4 Touch and hold the reset button

for 3 seconds to reset the filter

lifetime counter.

Note

• Do not touch the pleated filter surface,

or smell the filter as it has collected pollutants from the air.

2 Remove all packaging material of

the new filter.

Note

• Cleanse your hands after changing the

filter.

17EN

Filter force reset 1

Touch and simultaneously for 3 seconds to enter the filter force reset mode.

» Code (A3) of the NanoProtect

S3 filter HEPA displays on the screen.

4 Touch and hold for 3 seconds to

force reset the filter lifetime of the NanoProtect S3 AC filter and exit the filter force reset mode.

2 Touch and hold for 3 seconds to

force reset the filter lifetime of the NanoProtect S3 filter HEPA.

3 Code (C7) of the Nanoprotect AC

filter displays on the screen after the lifetime of the NanoProtect S3 filter HEPA has been reset.

Filter type change

Touch and simultaneously

for 3 seconds to enter the filter type change mode.

» Code (A3) of the NanoProtect

S3 filter HEPA displays on the screen.

2 Touch to select the filter code of

the new filter you will use.

18 EN

English

3 Touch and hold for 3 seconds to

confirm the filter code of the new filter.

Note

• After you have selected the filter code

of the new filter using the if you do not touch any other buttons in 10 seconds, the appliance will automatically confirm the filter code of the new filter.

button,

5 Touch to select the new filter

code of the second filter.

6 Touch and hold for 3 seconds

to confirm the filter code of the second filter and exit the filter type change mode.

4 Code (C7) of the Nanoprotect

AC filter displays on the screen after the first filter type has been changed.

Note

• After you have selected the filter code

of the new filter using the if you do not touch any other buttons in 10 seconds, the appliance will automatically confirm the filter code of the new filter.

Note

button,

• Refer to the separate leaflet that comes

with the filter for more information on different filter combinations for your choice.

19EN

7 Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Center in your country.

Problem Possible solution

The appliance does not work even though it is plugged in..

The appliance does not work even though it is switched on.

The airow that comes out of the air outlet is signicantly weaker than before.

The air quality does not improve, even though the appliance has been operating for a long time.

• The filter replacement code has been displaying on the screen but you have not replaced the corresponding filter yet. The appliance will be locked if you keep using the expired filter. In this case, replace the filter and reset the filter lifetime counter.

• The appliance is working but the buttons are not responsive. Check if the child lock is on.

• The filter replacement code has been on continuously but you have not replaced the corresponding filter, and the appliance is now locked. In this case, replace the filter and reset the filter lifetime counter.

• The pre-filter is dirty. Clean the pre-filter (see chapter "Cleaning").

• One of the filters has not been placed in the appliance. Make sure that all filters are properly installed in the following order, starting with the innermost filter: 1) NanoProtect S3 filter HEPA; 2) NanoProtect AC filter; 3) pre-filter.

• The air quality sensor is wet. The humidity level in your room is high and causes condensation. Make sure that the air quality sensor is clean and dry (see chapter "Cleaning").

The color of the air quality light always stays the same.

20 EN

• The air quality sensor is dirty. Clean the air quality sensor (see chapter "Cleaning").

English

Problem Possible solution

• The first few times you use the appliance, it may produce

The appliance produces a strange smell.

a plastic smell. This is normal. However, if the appliance produces a burnt smell, contact your Philips dealer or an authorized Philips service centre. The appliance may also produce an unpleasant smell when the filter is dirty. In this case, clean or replace the filter concerned.

The appliance is extra loud.

The appliance still indicates that I need to replace a lter, but I already did.

Error code "Er" displays on the screeen.

Error codes "E1", "E2", "E3" or "E4" displays on the screeen.

• If the appliance is too loud, you can change the fan speed to a lower fan speed level. When using the appliance in a bedroom at night, choose the sleep mode.

• Perhaps you did not reset the filter lifetime counter. Plug in the appliance, touch

to switch on the appliance, and

touch and hold the reset button for 3 seconds.

• The hall sensor is not working properly. Remove and then reattach the front panel. If the error code "Er" still exists, contact the Consumer Care Center in your country.

• The appliance has malfunctions. Contact the Consumer Care Center in your country.

21EN

+ 47 hidden pages