3 Using the air purier ��������������������������������������������������������� 4
Air quality light �������������������������������������������������������������������������������������������������4
Turning On and O ����������������������������������������������������������������������������������������5
Changing the mode setting ���������������������������������������������������������������������6
Switching the display indicator �������������������������������������������������������������� 7
Using the light on/o function ��������������������������������������������������������������� 7
Checking the lter status ���������������������������������������������������������������������������8
4 Cleaning and maintenance ��������������������������������������������8
Cleaning the body of the air purier ���������������������������������������������������8
Cleaning the particle sensor ��������������������������������������������������������������������8
Cleaning the surface of the lter �����������������������������������������������������������9
Replacing the lter ��������������������������������������������������������������������������������������10
Filter reset ���������������������������������������������������������������������������������������������������������� 11
Note: Make sure the air purier is unplugged from the electrical outlet before installing the lter�
12345
1 Pull the back cover and remove it from the appliance�
2 Pull the lter from the appliance�
3 Remove all packaging materials of the air purication lter�
4 Put the lter back into the appliance�
5 Reattach the back cover�
3EN
Wi-Fi indicator
Wi-Fi icon statusWi-Fi connection status
Blink in orange Connecting to the smartphone
Blink in whiteConnecting to the router
Stable in white Connected to the router
OWi-Fi function disabled
Wi-Fi connection
First time connection
1 Download and install the Philips “Clean Home+” app from the
App Store or Google Play�
2 Connect your smartphone or tablet to your Wi-Fi network�
3 Launch the “Clean Home+” app and click on “Connect a New
Device” or press the “+” button on the top of the screen� Follow
the onscreen instructions to connect the air purier to your network�
Reset the Wi-Fi connection
1 Touch and for 3 seconds until you hear a beep�
» The Wi-Fi indicator blinks orange�
2 Follow the steps 3 in “First time connection” section�
Note: Please check www�philips�com/cleanhome for the latest update of supported Operation
System and devices�
3 Using the air purifier
Air quality light
After approximately 30 seconds, the particle sensor selects the color that
corresponds to the surrounding air quality of airborne particles�
Note: The color of the air quality light is determined by the highest risk index among PM2�5, IAI
and readings�
4EN
IAI refers to the level of indoor air allergen�
IAI levelAir quality light colorAir quality level
1-3BlueGood
4-6Blue-purpleFair
7-9Purple-redPoor
10-12RedVery poor
PM2�5 refers to airborne particle pollutants smaller than 2�5 micrometers.