Philips 8P4841C199 User Manual

о и

U и

>м

Return your Warranty Registration card today to ensure you receive

all the benefits you’re entitled to.

Once your PHILIPS MAGNAVOXpurchase is registered, you’re eligible to receive ail the privileges of

owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card

enciosed with your purchase at once. And take advantage of these important benefits.

■ Warranty i

Verification

Registering your product within

10 days confirms your r^ht to maximum protection under the terms and condions of your

PHILIPS MAGNAVOX warranty.

. Owrier i

Confirmation

Your completed Warranty Registration Card senres as verification of owiBrshIp in the event of product theft or loss.

.Model I Registration

Returning your Warranty Registration Card right away

gi^rantees you’ll receive all

the information and fecial

offers which you qual% lor as the owner of your model.

Congratulations on your purchase,

and welcome to the “family!”

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, bestbacked products available today. And we’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction. All of this is our way of saying welcome-and thanks for investing in a PHILIPS MAGNAVOX product. Sincerely,

PHILIPS

MAGNAVOX

Robert Minkhorst President and Chief Executive Officer

Know these

SQÎQXy symbols

CAUTIOIM

RISK OF ELECTRIC SHOCK

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK]. NO USER^ERVICEABLE PARTS

INSIDE. REFER SERVICING TO OUALIRED SERVICE PERSONNEL.

DO NOT OPEN

PHILIPS

MAGNAVOX

P.S. Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your Warranty Registration Card within 10 days. So please mall it to us right now!

This “bolt of lightning” indicates uninsulated material within your unit which may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert. ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

Visit our World Wide Web Site at http://www.philipsmagnavox.com

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.

Read Instructions - All the safety and operating instructions should

be read before the appliance is operated.

Retain Instructions - The safety and operating instructions should

be retained for future reference.

Heed Warnings - All warnings on the appliance and in the operating

instructions should be adhered to.

Follow Instructions - All operating and use instructions should be

followed.

Water and Moisture - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub, In a wet basement or near a swimming pool, etc.

Carts and Stands - The appliance should be used only with a cart or

stand that is recommended by the manufacturer.

6A.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

Ventilation - The appliance should be situated so that Its location or

position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat - The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (Including amplifiers) that produce heat.

10.

Power Sources - The appliance should be connected to a power

supply only of the type described in the operating instructions or as marked on the appliance.

11.

Power-Cord Protection - Power supply cords should be routed so

that they are not likely to be walked on or pinched by Items placed upon or against them, paying particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning - The appliance should be cleaned only as recommended

by the manufacturer.

13. Power Lines - An outdoor antenna should be located away from

power lines.

14. Outdoor Antenna Grounding - if an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides Information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Fig. below.

15. Non-use Periods - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of time.

16. Object and Liquid Entry - Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through openings.

17. Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:

A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits

a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other

servicing should be referred to qualified service personnel.

Note to the CATV system installer: This reminder is provided to call the

CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

i Getting Started

Welcome/Product Registration Safety/Precautions Table of Contents Features, Model and Cabinet Information

...................................................

.....................................................

.................

...............

[ I On-Screen Features

PICTURE MENU

"v"Adjusting Color, Brightness, Sharpness,

Tint, and Picture Controls

fusing the Clearview Control ^Adjusting the TV's Convergence Control fusing the Flesh Correction Control

FEATURES MENU

Selecting a Picture Source...............................10

^Setting the TV for Closed Captioning

"^Setting the TV for Cable or Antenna Signals.... 12

^Adding Channels in Memory (Automatically) .13

^Adding Channels in Memory (Manually).........14

^Setting the TV Clock "v^Tum-On Timer "v^Using the Sleep Timer Control

Adjusting the Channel Display Control "fusing the Time/Channel Reminder Control

-------------------------------

.................................

...............................

..........

.....................

-----------------------------

..............

........................................

..............................................

.....................

..........

.....

15 16 17 18 18

Q Remote Control Operation

2 3 4 5

6 7

8 9

Using the Smart Surf Control Setting the Remote to Work VCRs Setting the Remote to Work

Cable TV Converters........................................38-39

Setting the Remote to Work VCRs or Cable Converters - "Search Method"

Using the Remote's VCR buttons

Picture-In-Picture (PIPÌ

Selecting the Picture Source for PIP......................45

Adjusting Picture-in-Picture Color and Tint More PIP Connections (Cable Converter)

Setting the Smart Picture Control........32-33

Using Smart Sound Control

How to Use PIP (Connections) How to Use PIP with the TV Remote

......................

................................

..................

...............................

..........................

...........

..........

.............

36-37

42-43

........

34 35

46 47

General Information

TV Help Menu

Tips if Something Isn’t Working Glossary of TV Terms

Index......................................................................51

Factory Service Locations Warranty

................................................................

.........................................

.............

...........................................

................................

52-53

48 49 50

fusing Parental Control to Censor Channels 19-20 "Causing the Channel Label Control "v^Using the Language Selection Control

SOUND MENU

Adjusting Bass, Treble, and Balance Sound

Controls...........................................................23

Setting the Bass Boost Control

Setting the TV for Stereo and SAP Programs ..24 "fusing the Incredible Stereo Control "v^Using the Volume Display Control fusing the TV Speaker On/Off Control with

the Audio Output jacks "v^Surround Sound Speaker Connections and

Variable Audio Output Control "fusing the TV's Audio/Video Input and

Output Jacks .............................................28-31

Because of continuous product improvements, the information mentioned in the documents accompanying your product are subject to change without notice.

--------------------------------

...................................

.................

.........

......................

.................

..............

......................

25 25

Set-up and Quick Use Guide

Use the simple Set-Up Guide (supplied with your TV information packet) for details on:

• Antenna Hook-ups

• First Time Set-Up (Automatic Settings)

• Basic TV and Remote Control Operation

• On-Screen Menu Use

NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting

Features

First Time Set Up - automatically sets the TV for local channels, the correct picture signal (antenna or cable), and assists in the setting of TV’s Smart Clock feature.

Infrared Remote Control - operates your TV set and a variety of wireless remote control VCRs and Cable TV Converters.

Standard TV broadcast (VHF/UHF) or Cable TV (CATV) channel capability.

Closed Captioning - allows the viewer to read TV

program dialogue or voice conversations as on-screen text.

Automatic Programming of channels - for quick and easy selection of favorite stations available in your area.

Picture-In-Picture (PIP) - can show a TV program and the direct video output from an accessory (VCR, etc.) onto the TV screen at the same time.

Parental Control for ‘‘Censoring” - this feature can block out channels to keep children from watching imdesirable programming.

Stereo-TV - with a built-in audio amplifier and a twin speaker system, reception of TV programs in both broadcast stereo sound or (SAP) bilingual broadcast are available.

Twin Antenna (A/B) Inputs - for easy displaying of two separate signal sources on the TV. An A/B button on the remote control switches the TV’s Main screen between the two Antenna (A & B) Input options.

AudioA^ideo Jacks - for direct connections with VCRs (and other accessories) for quality TV picture and sound playback.

Surround Sound - this TV set contains external audio speaker connections for a more dynamic sound effect.

Sleep-Timer - automatically turns the TV OFF at preset time intervals.

Smart Button - for the control of TV Sound and the Picture levels. Use the Smart Button on the remote to quickly adjust Smart Sound (to set TV Volume levels during program changes or commercial breaks); Smart Picture (for programmed video video level adjustments on a variety of program sources); and Smart Surf (for quick one button channel selection of up to 10 of your favorite channels).

As you unpack your TV please note that the following items have been included with your set:

• Owner's Manual

- Safety Tip Information

- Factory Service Center Locations

• Warranty Registration Card

• Remote Control Transmitter

• Batteries for Remote Control Use Please take a few minutes to complete your

registration card. The serial number for the TV is on the back of the set.

Refer to the back of this manual for instructions on the cleaning and care of the TV.

End-of-Life disposal

Your new projection television and its packaging contain materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and minimize the amounts which need to be properly disposed.

Your product also uses batteries which should not be thrown away when depleted, but should be handed in and disposed of as small chemical waste.

Please find out about the local regulations on how to dispose of your old television, batteries, and packaging materials whenever you replace existing equipment.

Optional Accessory Storage

Shelf and Screen Eilter

An accessory storage shelf compartment has been designed into some Projection TV Cabinets for the placement of such items as VCRs, CD-i (Compact Disc Interactive) Players, or other pieces of audio/video equipment. If your Projection TV is so equipped, use the connection tunnel (located on the rear wall of the storage compartment) to route Antenna, Cable, or other signal supply wires from the accessories to the TV’s rear cabinet Jackpanel.

Note: A Projection TV Screen Enhancement Filter may also be present on certain select models. Refer to the Cleaning and Care Instructions provided for directions on how to remove the framed filter if it should ever be necessary.

Picture Menu Control Adjustments

COLOR, BRIGHTNESS,

SHARPNESS, TINT, PICTURE

^0 adjust your TV color and

picture controls, select a TV

channel and follow the steps shown below:

Select BRIGHTNESS, PICTURE, COLOR, TINT, or SHARPNESS picture control.

With the PICTURE MENU on screen, move the REDJiighlight with the MENU (M) ^ ► buttons.

Then press the MENU button.

Press the (+) or (-) buttons to adjust the selected control.

Press the STATUS button to

clear the screen.

BEGIN)

^ MENU '

IwTi

jj CLEARVIEW1

Smart Hki.p

Remember. When the bar

^ scale is centered, control settings are at normal mid-range levels.

BRIGHTNESS Press (-) or (+) until dark parts of the picture show good detail.

PICTURE Press (-) or (+) until whitest parts of the picture are as bright as you prefer.

COLOR Press (-) or (+) to add or eliminate color.

TINT Press (-) or (+) to obtain natural skin tones. (Also see Flesh Correction on page 9 for more information).

SHARPNESS Press (-) or (+) to improve detail in the picture.

Select and then press MENU (M) button to view an explanation of the selected feature.

HOW TO SELECT FEATURES

(WITH BUTTONS ON THE REMOTE)

Select and then press MENU (M) button to view additional controls grouped under same feature heading. For Example: Tint, Brightness, Picture, etc.

Press MENU (M)^ ^

to move from Side-to-

Side within the Menu.

the Menu.

Picture Menu Controls (continued)

CLEARVIEW

learview is a sharpness feature which smoothes out

background snow (or picture noise) without losing picture image detail or crispness.

(BEGIN)

<1> Select CLEARVIEW control.

With the PICTURE MENU on screen, move the RED highlight with the MENU (M)<•> buttons.

Then press the MENU button.

Press the MENU

<i>

to move the RED highlight. Press the MENU button to select {u^) the

ENHANCED mode.

Press the STATUS button to

clear the screen.

1^^

buttons

i -X-

rHELPl

I next j

RED/BLUE CONVERGENCE

onvergence is the correct lining up of the red and blue

light paths on the TV screen.

NOTE: If no color fringing (see

Smart Help) shows^ then no Convergence adjustments are

necessary for your TV.

(BEGIN)

<1> Select CONVERGENCE

control.

Picture Menu Controls (continued)

’ MAIN MENU

^ PICTURE MENU ■

With PICTURE MENU (2 of 2) on

screen, move the REI^highlight with the MENU (M)^*^ buttons.

Then press the MENU button.

<l>

If there is RED or BLUE color

fringing on the White cross, press the MENU button to continue.

<l>

Press the MENU buttons

to move the red or blue cross directly over the white cross on the TV screen.

The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).

Press the STATUS button to

clear the screen when convergence adjustments are complete.

PICTURE

CLEARVIEW

MORE..

^ PICTURE MENU '

CONVERGENCE

FLESH CORRECTION

If there is RED or BLUE

fringe on the WHITE cross,

use this adjustment to

improve the picture.

Smart Hi;lr

Remember. Convergence

^ has been set at the factory for best viewing, but if one or more of the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.

Press "M" to Continue

- or -

Press to Return

Use the^.^^keys to merge the

RED fringe into the WHITE

cross. Press "M" to Continue.

FLESH CORRECTION

T Tse the Flesh Correction

Cy control to keep skin tone hues

(or facial tint) from varying from TV channel to TV channel.

(BEGIN)

<|> Select FLESH

CORRECTION control.

With PICTURE MENU (2 of 2) on screen, move the RED highlight

with the MENU (M) ^ ► buttons. Then press the MENU button.

Press the MENU AT buttons

<l>

to move the RED highlight. Press the MENU button to turn (u^) the FLESH CORRECTION control ON.

Picture Menu Controls (continued)

Press the STATUS button to

clear the screen.

PICTURE SOURCE

^he picture for the TV can come through either the ANTENNA

plug or the AUDIOIVIDEO IN put jacks (on the rear of the TV). The Picture Source control simply tells

the TV which one of these picture

sources it is to show on the TV screen. [begin)

Select PICTURE SOURCE

SELECT control.

With the FEATURES MENU on

screen, move the REDJiighlight with the MENU (M) buttons.

Then press the MENU button.

<|> Press the MENU

to move the RED highlight. Press the MENU button to turn the desired PICTURE SOURCE control ON

ANT A or B- for a picture signal coming from either the ANT(enna) A or B Input plugs on the TV.

AUX 1- for a picture signal coming from the AUX 1 Video

Input jack on the rear of the TV.

AUX 2- for a picture signal coming from the AUX 2 Video

Input jack on the rear of the TV. AUX 3- for a picture signal

coming from the Video Input jack on the front of the TV.

Press the STATUS button to

clear the screen.

Feature Menu Control Adjustments

buttons

Note: A “S-VIDEO 1” (or 2) Input will appear as a PICTURE SOURCE SELECT(ion) in place of the AUX 1 (or AUX 2) position when the SVIDEO plugs (on the rear of the TV) are connected. See page 30 for operating details on S-VIDEO.

Smart Hi:lp

Remember, the AUX 1,

i AUX 2, and AUX 3 modes must have a video signal source connected (to their INPUT plug) or the TV screen will be blank. (See page 28 for connection details).

Feature Menu Controls (continued

CLOSED CAPTION

'losed Captioning (CC) allows you to read the voice content of

television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations while the TV program is in progress.

t BEGINS

Select CLOSED

<x>

CAPTIONING control.

With the FEATURES MENU on screen, move the REDJiighlight with the MENU (M) ^ ► buttons.

Then press the MENU button.

NOTE: Not all TV programs and product commercials are made for broadcast with Closed Caption (CC) information included. Neither are all Closed Caption modes (CAPTION 1-4; or TEXT 1-4) necessarily being used by a broadcast station during the transmission of a closed caption program. Usually ’’CAPTION 1” is the most used mode to view captioned material. Refer to your area's TV program listings for the stations and times of Closed Caption shows.

Press the MENU

<l>

to move the RED highlight. Press the MENU button to select {u^) the desired Closed Caption mode - For Example: ’’ALWAYS ON” and ’’CAPTION 1”.

CAPTION 1, 2, 3, 4.

dialogue (and descriptions) for the action on the captioned TV program shows on-screen. (See Important Note on this page.)

TEXT 1, 2,3,4:

often used for channel guide, schedules, or bulletin board information for CC programs.

After making your Caption mode

selection, press the STATUS button

to clear the TV screen. The selected Closed Caption mode will be active.

To cancel, set the Closed Captioned feature to OFF when finished.

buttons

rOW/OfFH POS SWAP n FRKZn

PIPCZZZZIHD

NOTE: The ON DURING MUTE ONLY control can be used to set the TV to turn the Closed Caption mode "ON" whenever the

MUTE button on the

remote is pressed.

CAPTION 1 mode

Example Screen Display

Smart Help

Remember. Broadcast

S stations will often use spelling abbreviations, symbols, dropouts and other grammatical shortcuts in order to keep pace with the on-screen action. These type factors vary upon the source of the captioned text material and do not indicate a need for service on the part of the TV.

Closed Caption information will usually appear in black and white (although some broadcasters or networks may occasionally use color to highlight or draw attention to certain areas.)

FULL SCREEN TEXT

will block TV screen from viewing

Feature Menu Controus (continued)

CABLE TUNING

ou need to make sure the TV is

set to pick up either Cable TV

or Antenna signals. In other words, the TV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA

plug. NOTE: If you went through First

Time Setup (in your Quick Use Guide), this task has already been completed for you.

CbeginJ

Select CABLE CHANNEL

TUNING control.

With the FEATURES MENU on

screen, move the REI^highlight with the MENU (M)^*^ buttons.

Then press the MENU button.

FEATURE MENU

CLOSED i

captions!

<|> Press the MENU

buttons

to move the RED highlight. Press the MENU button to select (u^) the desired mode - For Example: CABLE.

CABLE- If you DO have

Cable TV connected

to the TV. Channels

1-125 available.

NORMAL- If you have an

Antenna connected

to the TV. Channels 2-69 available.

Press the STATUS button to

<S>

clear the screen.

s Q

(5Z5EH POS HsWAP H FREEZE I

PIPI

2TUNI^IP^__^

Note: Both ANT(enna) A and ANT B inputs on the rear of the TV can be set for the correct connected signal (either an Antenna or Cable TV source).

Feature Menu Controls (continued)

CHANNEL MEMORY

AUTO-PROGRAMMING

'XZour TV can automatically set itself X for local area (or Cable TV)

channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL A W

buttons are pressed. NOTE: If you went through First

Time Setup (in your Quick Use Guide), this task has already been completed for you.

(begin)

<|> Select CHANNEL MEMORY

(START AUTO-PROGRAMMING)

control.

With the FEATURES MENU on screen, move theJ^ED highlight with the MENU (M)^*^ buttons. Then

press the MENU button.

!□

Press the MENU button to turn

<l>

AUTO-PROGRAMMING ON . The TV shows which channel

numbers are ’’SAVED” (i/^) as they are added into memory.

”Auto-programming CHANNEL MEMORY is finished” shows when the TV is through adding channels.

Press the STATUS or Menu (M)

button to clear the screen.

Smari Help

Try it out. Press the

g CHANNELAT buttons

and see which channels you can

select.

Remember, an Antenna or Cable TV signal must first be connected to your TV so that channels can be saved.

If you want to delete any unwanted channels from the TV’s memory, see ’’ADD/DELETE CHANNELS” on the next page.

□

ADD/DELETE CHANNELS

uto-Programming (see previous page) adds all the

channels it can find (on your

Antenna or Cable TV system) into

the TV's memory. AddIDelete Channels makes it easy for you to

add other channels, or drop

unwanted channels, from the list of channels in the TV's memory.

C begin]

Select CHANNEL MEMORY

<i>

(ADD/DELETE CHANNELS) control.

With the FEATURES MENU on

screen, move the RED highlight

with the MENU (M) ◄•►buttons. Then press the MENU button.

Feature Menu Controls (continued)

Press the CHANNEL

number buttons to select the

channel you want to add or delete.

Press the MENU ► button to

ADD the channel into the TV's memory.

Press the MENU ^ button to DELETE the channel from memory.

Repeat steps 2 and 3 for each

channel you wish to add or delete.

<4> Press the STATUS or MENU

button to clear the screen when

through.

Smart Hki.p

Remember. You can also

S add the AUX 1, AUX 2, or AUX 3 modes just like a channel. Then by pressing the CHANNEL

buttons the AUX(iliary)

mode can quickly be selected to use the desired set of Input jacks on the TV (see page 28).

Note: AUX 1, AUX 2, and AUX 3 modes are located between the lowest and highest channel numbers within the ADD/DELETE CHANNEL control screen.

NOTE: A separate ADD/DELETE CHANNEL memory may also be created for the ANT(enna) B Input on the rear of the set (if an Antenna or Cable TV signal has been connected). Just press the button on the remote, while in the ADD/DELETE CHANNEL mode, to switch between the ANT A and ANT B channel memory lists. Then follow steps 2 and 3 as shown to the left to add or delete the desired channels.

Feature Menu Controls (continued)

SET CLOCK

our TV comes with an on

screen clock. During normal

operation the clock appears on the screen with every channel change (and when the STATUS button is

pressed).

NOTE: If you went through First Time Setup (in your Quick Use Guide), this task has already been completed for you.

Cbegiw]

Select SET CLOCK control.

<x>

With FEATURES MENU (2 of 5) on screen, move the RED highlight with the MENU (M)^*^ buttons.

Then press the MENU button.

Press the remote's number

<l>

buttons to set the time clock.

- FEATURE MENU -

CLOSED

CAPTIONS

= FEATURE MENU ■=

MORE..

1 'ci^'s'^

CHANNEL

DISPLAY

Press the STATUS button to

set the clock in operation and clear the screen.

Smart

Remember, be sure to

press "0" first and then the hour number for single digit entries.

The remote's MENU (M) buttons can also be used to set the hours, minutes and AM/PM portions of the clock.

TV Clock settings may be lost when the TV is unplugged (or AC power to the set is interrupted.)

■ 2 OF 5-

= SET CLOCK & ON TIMER -

SET

Qg]: 19 AM

PLEASE ENTER THE

CURRENT HOUR

SET ON TIMER

Tust like an alarm clock you can

U set the TV to turn itself on at the

same time everyday.

( begin!

<1^ Select SET ON TIMER

control. With FEATURES MENU (2 of 5)

on screen, move the RED highlight with the MENU (M) <•> buttons.

Then press the MENU button.

Feature Menu Controls (continued)

<|> Press the MENU

MENU (M) buttons to highlight

and select ’•ON” (/>).

Press the MENU AT and

<l>

then the MENU (M) buttons to

select "SET ON TIME".

Press the remote's number

<$>

buttons to set the "TURN ON"

time for the TV. (Press MENU

for AM or PM.)

<5> Press the STATUS button to

set the "ON TIME" and clear the

screen.

and

Feature Menu Controls (continued)

SLEEP TIMER

T Tave you ever fallen asleep in

JlJL front of the TV only to have it

wake you up at two in the morning

with a test pattern screeching in your ears? Well, your TV can save you all that trouble by

automatically turning itself off.

[BEGIN)

Press the SLEEP button on the

<$>

remote control.

Note: you can also select the

SLEEP control with the TV’s on

screen FEATURES MENU (2 of 5).

Move the RED highlight with the

MENU (M) ◄•►buttons. Then press

the MENU button.

Press the SLEEP button

<l>

repeatedly to pick the amount of

time (15 minutes to 2 hours ahead)

before the TV will turn itself off.

The (+), (-) buttons can also be used

to set the amount of time.

Press the STATUS or MENU

(M) button to clear the screen after

you have set the time for the TV to

turn off.

Smart Hklp

Remember, to see how

g many minutes are left before

the TV shuts itself off, reselect the

SLEEP TIMER control screen.

To stop a SLEEP TIMER setting,

reset the timer back to OFF.

(Turning the TV off and on, or

pressing a button during the last

minute of a timer setting, will also

cancel a setting.)

A few seconds before the TV is to shut off a message will come on the screen telling you GOOD NIGHT.

+ 37 hidden pages