Philips 6915031-PU DATSHEET

Getting started with your LivingColors

Unpacking and Installing

User Manual LivingColors Mini

If you unpack a LivingColors, you only need to plug the cable into the back of the product, connect it to the power system and start the
experience!

=

Step 1: Place your LivingColors in a selected location on a at and stable surface and direct it to the wall.

Step 2: Plug the cable into the back of the product.

Step 3: Plug your LivingColors into the power system.

++

Basic functionality

5 sec

=

Turn the LivingColors “On” or “Off”:

Your LivingColors can be turned “On” and “Off ” by using the “I”- and “0”-button on the back of the product. If you turn the LivingColors
“Off”, it will remember your last setting for the next time you use it.

Colour selection:

To let your LivingColors change to whatever colour you like, simply select the colour on the colour circle by touching it. If you sweep
around the colour circle with your nger (without taking it off) you will be able to ne-tune your selected colour and get the full range of
256 different colour options.

Extended functionality

Automatic Colour Change Mode:

You can also let your LivingColors change colours automatically. Hold the “I”-button on the back of the product for 5 seconds.
The Automatic Colour Change Mode will now start looping through the colours.