Philips 65BDL3050Q/00 User Manual
65BDL3050Q
V1.00
www.philips.com/welcome
User Manual (English)
65BDL3050Q
Safety Instructions
Warnings and Precautions
KNOW THESE SAFETY SYMBOLS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates high voltage is present inside.
It is dangerous to make any kind of contact with any
inside part of this product.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
CAUTION: FCC/CSA regulations state that any unauthorized changes
or modications to this equipment may void the user’s
authority to operate it.
CAUTION: To prevent electric shock, match the wide blade of plug to
the wide slot, and fully insert the plug.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC
SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
The Socket-outlet should be installed near the apparatus and be easily
accessible.
Read and follow these instructions
when connecting and using your Public
Information Display:
• Unplug the display if you are not going to use it for an extensive period
of time.
• Unplug the display if you need to clean it with a slightly damp cloth.
The screen many be wiped with a dry cloth when the power is off.
However, never use alcohol, solvents or ammonia-based liquids.
• Consult a service technician if the display does not operate normally
when you have followed the instructions in this manual.
• The casing cover should be opened only by qualied service personnel.
• Keep the display out of direct sunlight and away from stoves or any
other heat sources.
• Remove any object that could fall into the vents or prevent proper
cooling of the display’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the display dry. To avoid electric shock, do not expose it to rain
or excessive moisture.
• If turning off the display by detaching the power cable, wait for 6
seconds before re-attaching the power cable for normal operation.
• To avoid the risk of shock or permanent damage to the set do not
expose the display to rain or excessive moisture.
• When positioning the display, make sure the power plug and outlet are
easily accessible.
• IMPORTANT: Always activate a screen saver program during your
application. If a still image in high contrast remains on the screen for an
extended period of time, it may leave an ‘after-image’ or ‘ghost image’
on the front of the screen. This is a well-known phenomenon that is
caused by the shortcomings inherent in LCD technology. In most cases
the afterimage will disappear gradually over a period of time after the
power has been switched off. Be aware that the after-image symptom
cannot be repaired and is not covered under warranty.
ii
65BDL3050Q
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. The batteries (batteries installed) shall not be exposed to excessive
heat such as sunshine, re or the like.
16. An all-pole MAINS SWITCH is used as the disconnect device, the
location on the apparatus and the function of the switch shall be
described, and the switch shall remain readily operable
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
WARNING: Apparatus shall not be exposed to dripping or splashing
and no objects lled with liquids, such as vases, shall be
placed on the apparatus.
WARNING: The batteries (batteries installed) shall not be exposed to
excessive heat such as sunshine, re or the like.
WARNING: The mains plug or appliance coupler is used as the
disconnect device,the disconnect device shall remain
readily operable.
WARNING: To prevent the spread of re, keep candles or other open
ames away from this product at all times.
WARNING: To prevent injury, this apparatus must be securely attached
to the oor/wall in accordance with the installation
instructions.
WARNING: The Class I apparatus shall be connected to a mains socket
outlet with a protective earthing connection.
WARNING
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the
television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the
supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the television
set to a suitable support.
• Not placing the television set on cloth or other materials that may be
located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach
the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
CAUTION: These servicing instructions are for use by qualied service
personnel only. To reduce the risk of electric shock,do not
perform any servicing other than that contained in the
operating instructions unless you are qualitied to do so.
CAUTION: Excessive sound pressure from earphones and headphones
can cause hearing loss. Adjustment of the equalizer to
maximum increases the earphone and headphone output
voltage and the sound pressure level. Therefore, to protect
your hearing, adjust the equalizer to an appropriate level.
For UL/CUL application: For use only with UL Listed Wall Mount Bracket
with minimum weight/load: 24.8 Kg
For CB application: Unit without base weight: 24.8 Kg. The equipment and
its associated mounting means still remain secure during the test.(Used
wall mounting kit: 400x400 mm distance by using M6 screws of 10 mm
long plus the thickness of the mounting bracket.
iii
65BDL3050Q
IMPORTANT INFORMATION
Ifatelevisionisnotpositionedinasufcientlystablelocation,itcanbe
potentiallyhazardousduetofalling.Manyinjuries,particularlytochildren,
canbeavoidedbytakingsimpleprecautionssuchas:
• Using cabinets or stands recommended by the manufacturer of the
television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting
furniture.
• Not placing the television on tall furniture(for example, cupboards or
bookcases)without anchoring both the furniture and the television to a
suitable support.
• Not standing the televisions on cloth or other materials placed
between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach
the television or its controls.
EU Declaration of Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive
(2014/35/EU) and RoHS directive (2011/65/EU).
This product has been tested and found to comply with the harmonized
standards for Information Technology Equipment, these harmonized
standards published under Directives of Ofcial Journal of the European
Union.
Warning:
This equipment is compliant with Class A of EN55032/CISPR 32. In a
residential environment this equipment may cause radio interference.
ESD Warnings
When user close to the monitor may cause the equipment discharge and
reboot to the display of main menu.
InformationforEAC
Monthandyearof
manufacturing
Nameandlocationof
manufacturer
Importerandinformation Наименованиеорганизации:ООО
pleasereferinformationinRatinglabel.
ООО“Профтехника”
Адрес:3-йПроездМарьинойрощи,
40/1офис1.Москва,127018,Россия
“Профтехника”
Адрес:3-йПроездМарьинойрощи,
40/1офис1.Москва,127018,Россия
Контактноелицо:НатальяАстафьева,
+74956402020
nat@profdisplays.ru
Federal Communications Commission (FCC)
Notice (U.S. Only)
Note: This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case the
user will be required to correct the interference at his
own expense.
Changes or modications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
Use only an RF shielded cable that was supplied with the display when
connecting this display to a computer device.
To prevent damage which may result in re or shock hazard, do not
expose this appliance to rain or excessive moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Polish Center for Testing and Certication
Notice
The equipment should draw power from a socket with an attached
protection circuit (a three-prong socket). All equipment that works
together (computer, display, printer, and so on) should have the same
power supply source.
The phasing conductor of the room’s electrical installation should have a
reserve short-circuit protection device in the form of a fuse with a nominal
value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be
removed from the power supply socket, which should be located near the
equipment and easily accessible.
A protection mark “B” conrms that the equipment is in compliance with
the protection usage requirements of standards PN-93/T-42107 and PN-
89/E-06251.
iv
Electric, Magnetic and Electronmagnetic Fields
(“EMF”)
1. We manufacture and sell many products targeted at consumers, which,
like any electronic apparatus, in general have the ability to emit and
receive electromagnetic signals.
2. One of our leading Business Principles is to take all necessary health
and safety measures for our products, to comply with all applicable
legal requirements and to stay well within the EMF standards applicable
at the time of producing the products.
3. We are committed to develop, produce and market products that
cause no adverse health effects.
4. We conrm that if its products are handled properly for their intended
use, they are safe to use according to scientic evidence available today.
5. We play an active role in the development of international EMF and
safety standards, enabling us to anticipate further developments in
standardization for early integration in its products.
65BDL3050Q
Information for U.K. only
WARNING – THIS APPLIANCE MUST BE EARTHED.
Important:
(B)
(A)
This apparatus is supplied with an approved moulded 13A plug. To change
a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved
type.
3. Ret the fuse cover.
If the tted plug is not suitable for your socket outlets, it should be cut off
and an appropriate 3-pin plug tted in its place.
If the mains plug contains a fuse, this should have a value of 5A. If a plug
without a fuse is used, the fuse at the distribution board should not be
greater than 5A.
NOTE: The severed plug must be destroyed to avoid a possible shock
hazard should it be inserted into a 13A socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured in accordance with the following
code:
BLUE – “NEUTRAL” (“N”)
BROWN – “LIVE” (“L”)
GREEN & YELLOW – “EARTH” (“E”)
1. The GREEN & YELLOW wire must be connected to the terminal in
the plug which is marked with the letter “E” or by the Earth symbol or
coloured GREEN or GREEN & YELLOW.
2. The BLUE wire must be connected to the terminal which is marked
with the letter “N” or coloured BLACK.
3. The BROWN wire must be connected to the terminal which marked
with the letter “L” or coloured RED.
Before replacing the plug cover, make certain that the cord grip is clamped
over the sheath of the lead – not simply over the three wires.
v
65BDL3050Q
≤200
0
m
China RoHS
根 据 中 国 大 陆《 电子电气产品有害物质限制使用标识要求》，以 下 部 分
列出了本产品中可能包含的有害物质的名称 和含量。
有害物质
零部件名称
塑料外框 O O O O O O
后壳 O O O O O O
LCD
panel
电路板组件* X O O O O O
底座 O O O O O O
电源线 X O O O O O
其他线材 X O O O O O
CCFL X X O O O O
LED X O O O O O
铅
(Pb)汞(Hg)镉(Cd)
六价铬
(Cr
(VI))
多溴
联苯
(PBB)
多溴二
苯醚
(PBDE)
警告
此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。
在这种情况下，可能需要用户对干扰采取切实可行的措施。
仅适用于非热带气候条件下安全使用 :
汉文仅适用于非热带气候条件下安全使用。
蒙古文
藏文
维文
壮文
Dan hab yungh youq gij dienheiq diuzgen mbouj dwg
diegndat haenx ancienz sawjyungh.
仅适用于海拔 2000m 以下地区安全使用 :
汉文仅适用于海拔 2000m 以下地区安全使用。
蒙古文
遥控器 X O O O O O
*：电路板组件包括印刷电路板及其构成的零部件，如电阻、
电容、集成电路、连接器等。
本表格依据SJ/T 11364的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在
GB/T 26572 标准规定的限量要求以下.
X: 表示该有害物质至少在该部件的某一均质材料中的含量超
出 GB/T 26572 标准规定的限量要求.
上表中打“X”的部件中，应功能需要，部分有害物质含量超
出GB/T 26572规定的限量要求，但是符合欧盟RoHS法规要求(
属于豁免部分)。
备注：上表仅做为范例，实际标示时应依照各产品的实际部件及所
含有害物质进行标示。
10
环保使用期限
在产品本体上标示的该标志表示环境保护使用期限为10年。
电子信息产品的环境保护使用期限是指电子信息产品中所含的有害
物质不会向外部泄漏或出现突然变异，并且电子信息产品的用户在
使用该电子信息产品时也不会对环境造成严重污染或对人体、财产
带来严重损害的期限。
在环境保护期限中，请按照使用说明书使用本产品。
本环境保护使用不覆盖易损件：电池。
藏文
维文
壮文Hai dou gaxgonq, wngdang sien duenh denvasen bae.
“注意
汉文
蒙古文
藏文
维文
壮文
汉文
蒙古文
如果电池更换不当会有爆炸危险
只能用同样类型或等效类型的电池来更换”
“Louzsim
Danghnaeuz denyouz vuenh ndaej mbouj habdangq aiq miz
gij yungyiemj fatseng bauqcaq
Cijndaej yungh gij denyouz doengzyiengh loihhingz roxnaeuz
daengjyauq loihl haenx vuenh”
“接入本设备的有线网络天线必须与保护接地隔离 , 不
然可能会引起着火等危险 !”
《废弃电子产品回收处理管理条例》提示性说明
为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终
止时，请遵守国家废弃电器电子产品回收处理相关法律规定，将其
交给当地具有国家认可的回收处理资质的厂商进行回收处理。
藏文
vi
维文
65BDL3050Q
Waste Electrical and Electronie EquipmentWEEE
“Gij mizsienq vangjloz denhsen ciephaeuj bonj sezbi daeuj
壮文
haenx itdingh aeu caeuq gij ciepdieg baujhoh doxliz, mboujne
aiq miz gij yungyiemj dawzfeiz daengj!”
North Europe (Nordic Countries) Information
Placering/Ventilation
VARNING:
FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG
ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING
PÅPLATS.
Placering/Ventilation
ADVARSEL:
SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG
STIKKONTAKT ER NEMT TILGÆNGELIGE.
Paikka/Ilmankierto
VAROITUS:
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN
TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
Plassering/Ventilasjon
ADVARSEL:
NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT
KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ.
End-of-Life Disposal
Attention users in European Union private households
This marking on the product or on its packaging
illustrates that, under European Directive 2012/19/
EU governing used electrical and electronic appliances,
this product may not be disposed of with normal
household waste. You are responsible for disposal of
this equipment through a designated waste electrical
and electronic equipment collection. To determine
the locations for dropping off such waste electrical
and electronic, contact your local government ofce,
the waste disposal organization that serves your
household or the store at which you purchased the
product.
End of Life Directives-Recycling
Your new Public Information Display contains several
materials that can be recycled for new users.
Please dispose of according to all Local, State, and
Federal laws.
As an ENERGY STAR Partner, we have determined
that this product meets the ENERGY STAR guidelines
for energy efciency.
Restriction on Hazardous Substances statement (India)
This product complies with the “E-Waste (Management) Rules, 2016”
CHAPTER V, rule 16, sub-rule (1) . Whereas New Electrical and
Electronic Equipment and their components or consumables or parts or
spares do not contain Lead, Mercury, Cadmium, Hexavalent Chromium,
polybrominated biphenyls and polybrominated diphenyl ethers beyond a
maximum concentration value of 0.1% by weight in homogenous materials
for lead, mercury, hexavalent chromium, polybrominated biphenyls and
polybrominated diphenyl ethers and of 0.01% by weight in homogenous
materials for cadmium. except of exemptions set in Schedule 2 of the Rule.
Your new Public Information Display contains materials that can be
recycled and reused. Specialized companies can recycle your product to
increase the amount of reusable materials and to minimize the amount to
be disposed of.
Please nd out about the local regulations on how to dispose of your old
display from your local philips dealer.
(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance
to local-state and federal regulations. For additional information on
recycling contact www.eia.org (Consumer Education Initiative)
E-Waste Declaration for India
This symbol on the product or on its packaging
indicates that this product must not be disposed of
with your other household waste. Instead it is your
responsibility to dispose of your waste equipment
by handing it over to a designated collection point
for the recycling of waste electrical and electronic
equipment . The separate collection and recycling
of your waste equipment at the time of disposal
will help to conserve natural resources and ensure
that it is recycled in a manner that protects human
health and the environment. For more information
about E -waste please visit http://www.india.philips.
com/about/sustainability/recycling/index.page
and to know where you can drop off your waste
equipment for recycling in India please contact on
below given contact details.
vii
65BDL3050Q
Após o uso, as pilhas
deverão ser entregues ao
estabelecimento comercial
ou
e/ou baterias
rede de assistência técnica
autorizada.
Helpline number: 1800-425-6396 (Monday to Saturday, 9 a.m. to 5:30 pm)
Centralized E-waste collection center
Address: TPV Technology India Private Limited,
59, Maheswari Nagar, 1st Main Road, Mahadevapura Post,
Whiteeld Road
Bangalore, Karnataka, PIN: 560048, Tel: 080-3023-1000
E-mail: india.callcentre@tpv-tech.com
Batteries
ForEU:Thecrossed-outwheeledbinimplies
thatusedbatteriesshouldnotbeputtothe
generalhouseholdwaste!Thereisaseparate
collectionsystemforusedbatteries,toallow
propertreatmentandrecyclinginaccordancewith
legislation.
Pleasecontactyourlocalauthorityfordetailson
thecollectionandrecyclingschemes.
ForSwitzerland:Theusedbatteryistobereturned
to the selling point.
Forothernon-EUcountries:Pleasecontactyour
localauthorityforcorrectmethodofdisposalof
theusedbattery.
AccordingtoEUdirective2006/66/EC,thebattery
can’tbe disposedimproperly.Thebatteryshall be
separatedtocollectbylocalservice.
Turkey RoHS:
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Ukraine RoHS:
Обладнання відповідає вимогам Технічного регламенту щодо
обмеження використання деяких небезпечних речовин в електричному
та електронному обладнанні, затвердженого постановою Кабінету
Міністрів України від 3 грудня 2008 № 1057
viii
65BDL3050Q
Table Of Contents
1. UnpackingandInstallation .......................................................1
1.1. Unpacking ......................................................................................... 1
1.2. Package Contents ........................................................................1
1.3. Installation Notes ......................................................................... 1
1.4. Mounting on a Wall ....................................................................2
2. PartsandFunctions ...................................................................3
2.1. Control Panel .................................................................................3
2.2. Input/Output Terminals .............................................................4
2.3. Remote Control ........................................................................... 6
3. ConnectingExternalEquipment.......................................... 10
3.1. Connecting External Equipment (DVD/VCR/
VCD) ...............................................................................................10
3.2. Connecting a PC ....................................................................... 10
3.3. Connecting Audio Equipment ...........................................11
3.4. Connecting Multiple Displays in a Daisy-chain
Conguration .............................................................................. 11
3.5. IR connection .............................................................................. 12
3.6. IR Pass-through Connection ...............................................13
6. OSD Menu ............................................................................... 39
6.1. Navigating the OSD Menu .................................................. 39
6.2. OSD Menu Overview ........................................................... 39
7. SupportedMediaFormats .................................................... 45
8. InputMode ............................................................................... 47
9. PixelDefectPolicy .................................................................. 48
9.1. Pixels and Sub-Pixels ............................................................... 48
9.2. Types of Pixel Defects + Dot Denition .................... 48
9.3. Bright Dot Defects ...................................................................48
9.4. Dark Dot Defects.....................................................................49
9.5. Proximity of Pixel Defects ...................................................49
9.6. Pixel Defect Tolerances ......................................................... 49
9.7. MURA ............................................................................................. 49
10. CleaningandTroubleshooting .............................................. 50
10.1. Cleaning ..........................................................................................50
10.2. Troubleshooting ......................................................................... 51
11. TechnicalSpecications ......................................................... 53
4. Operation ................................................................................. 14
4.1. Watch the Connected Video Source ............................ 14
4.2. Change Picture Format ......................................................... 14
4.3. Overview.......................................................................................14
4.4. Media Player introduction: ................................................... 15
4.5. Browser manual ......................................................................... 17
4.6. PDF reader play ......................................................................... 20
4.7. CMND & Play .............................................................................22
4.8. Custom App ................................................................................ 22
5. Signagedisplay ......................................................................... 24
5.1. Setting ..............................................................................................24
5.2. Ethernet..........................................................................................24
5.3. Proxy ................................................................................................ 24
5.4. Signage Display ........................................................................... 25
5.5. System Tools ................................................................................33
5.6. Clone Media File ....................................................................... 34
5.7. Display ........................................................................................... 35
5.8. Apps ................................................................................................. 35
5.9. Security ........................................................................................... 35
5.10. Date & time .................................................................................35
5.11. Developer options ................................................................... 35
5.12. About .............................................................................................. 36
5.13. Supplementary ........................................................................... 36
ix
1. Unpacking and Installation
1.1. Unpacking
• This product is packed in a carton, together with the standard accessories.
• Any other optional accessories will be packed separately.
• Due to the size and weight of this display it is recommended for two people to move it.
• After opening the carton, ensure that the contents are complete and in good condition.
1.2. Package Contents
Please verify that you received the following items with your package content:
• LCD display
• Quick start guide
• Remote control with AAA batteries
• Power cord
• RS232 cable
• RS232 daisy chain cable
• IR sensor cable
• HDMI cable
• USB cover and screw x1
* The supplied power cord varies depending on destination.
Quick start guide
65BDL3050Q
NORMAL
ID
FORMAT
SOURCE
INFOLIST
OPTIONSADJUST
VOL
ID SET ENTER
Remote Control
and AAA Batteries
Power Cord
RS232 Cable
HDMI Cable USB Cover x1IR Sensor Cable
RS232 Daisy Chain Cable
* Differences according to regions
Display design and accessories may differ from those illustrated above.
NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and complies with the
safety regulations of the particular country (Type H05W-F, 2G or 3G, 0.75 or 1 mm2 should be used).
• You might like to save the package box and packing material for shipping the display.
1.3. Installation Notes
• Due to the high power consumption, always use the plug exclusively designed for this product. If an extended line is required, please consult your
service agent.
• The product should be installed on a at surface to avoid tipping. The distance between the back of the product and the wall should be maintained
for proper ventilation. Avoid installing the product in the kitchen, bathroom or any other places with high humidity so as not to shorten the service life
of the electronic components.
• The product can normally operate only under 3000m in altitude. In installations at altitudes above 3000m, some abnormalities may be experienced.
1
65BDL3050Q
Table
1.4. Mounting on a Wall
To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface
that complies with TUV-GS and/or UL1678 standard in North America.
Protective Sheet
VESA Grid
1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the
screen face.
2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc).
3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment
or injury to the user or installer. Product warranty does not cover damage caused by improper installation.
4. For the wall-mounting kit, use M6 mounting screws (having a length 10 mm longer than the thickness of the mounting bracket) and tighten them
securely.
5. Unit without base weight= 24.8 kg. The equipment and its associated mounting means still remain secure during the test. For use only with UL Listed
Wall Mount Bracket with minimum weight/load: 24.8 kg.
6. Portrait is not allowed.
1.4.1. VESA Grid
65BDL3050Q
Caution:
To prevent the display from falling:
• For wall or ceiling installation, we recommend installing the display with metal brackets which are commercially available. For detailed installation
instructions, refer to the guide received with the respective bracket.
• To lessen the probability of injury and damage resulting from fall of the display in case of earthquake or other natural disaster, be sure to consult the
bracket manufacturer for installation location.
Ventilation Requirements for enclosure locating
To allow heat to disperse, leave space between surrounding objects as shown in the
diagram below.
400(H) x 400(V) mm
100 mm
100 mm 100 mm
100 mm
2
2. Parts and Functions
MUTE INPUT
MENU
2.1. Control Panel
9
65BDL3050Q
1 2 3 4 5 6 7 8
1
[ ] button
Use this button to turn the display on or put the display to standby.
2
[MUTE] button
Switch the audio mute ON/OFF.
3
[INPUT] button
Choose the input source.
• Used as [ ] button in the On-Screen-Display menu.
4
[ ] button
• Increase the volume
• Enter into submenu while OSD menu is on
5
[ ] button
• Decrease the volume
• Back to previous menu while OSD menu is on
6
[ ] button
• Move the highlight bar up to adjust the selected item while
OSD menu is on
• Increase the adjustment while adjust value.
7
[ ] button
• Move the highlight bar down to adjust the selected item while
OSD menu is on.
• Decrease the adjustment while adjust value.
9
Remote control sensor and power status indicator
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
*UsingIRsensorcableforbetterremotecontrolperformance.
(Please refer to the instructions of 3.5)
8
[MENU] button
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
3
65BDL3050Q
100-240V
50-60Hz 2.5A
HDMI 1 IN HDMI 2 IN
DP IN
RJ45
RS232
OUT
RS232
IN
2.2. Input/Output Terminals
USB 5V/0.5A
MICRO SD
5V/2A
19
18
21
2
1
1
AC IN
AC power input from the wall outlet.
2
MAIN POWER SWITCH
Switch the main power on/off.
3
AC OUT
AC power supply to the AC IN jack of a media player.
4
RJ-45
LAN control function for the use of remote control signal from
control center.
5
RS232C IN / 6 RS232C OUT
RS232C network input / output for the loop-through function.
7
DisplayPort IN
DisplayPort video input.
8
HDMI1 IN / 9 HDMI2 IN / 10 HDMI3 IN /
11
HDMI4 IN
HDMI video/audio input.
12
IR OUT / 13 IR IN
IR signal input / output for the loop-through function.
NOTES:
• This display’s remote control sensor will stop working if the jack
[IR IN] is connected.
• To remotely control your A/V device via this display, refer to page
14 for or IR Pass Through connection.
14
VGA IN (D-Sub)
VGA video input.
15
AUDIO IN
Audio input for VGA source (3.5mm stereo phone).
3
20
5 7
4
6 8 9
16
AUDIO OUT
Audio output to external AV device.
17
USB PORT
Connect your USB storage device
18
USB PORT A
USB
5V/2A
19
MICRO SD CARD
Connect your MICRO SD CARD.
20
OPS SLOT
Slot for installing the optional OPS module.
21
SECURITY LOCK
Used for security and theft prevention.
USB 2.0 5V/0.5A
IR-INIR-OUT
USB 3.0 5V/0.9A
AUDIO OUT
AUDIO IN
D-SUB
HDMI 3 IN HDMI 4 IN
17
16
15
14
13
12
11
10
4
65BDL3050Q
2.2.1. Inserting the batteries in the remote control
The remote control is powered by two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to open it.
2. Align the batteries according to the (+) and (–) indications inside the
battery compar tment.
3. Replace the cover.
Caution:
The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions:
• Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment.
• Do not mix battery types.
• Do not combine new batteries with used ones. It causes shorter life or leakage of batteries.
• Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can
damage your skin.
NOTE: If you do not intend to use the remote control for a long period, remove the batteries.
2.2.2. Handling the remote control
• Do not subject to strong shock.
• Do not allow water or other liquid to splash the remote control. If the remote control gets wet, wipe it dry immediately.
• Avoid exposure to heat and steam.
• Other than to install the batteries, do not open the remote control.
2.2.3. Operating range of the remote control
Point the top of the remote control toward the display’s remote control sensor when pressing a
button.
Use the remote control within a distance of less than 8m/26ft from the display’s sensor, and a
horizontal and vertical angle of less than 30 degrees.
NOTE: The remote control may not function properly when the remote control sensor on the
display is under direct sunlight or strong illumination, or when there is an obstacle in the
path of signal transmission.
3030
5
65BDL3050Q
2.3. Remote Control
2.3.1. General functions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
5
[ ] LIST button
No function.
6
NAVIGATION buttons
[ ]
Root Menu: Go to Smart picture OSD.
Main Menu: Move the highlight bar up to adjust the selected item.
IRDaisyChainMenu: Increase controlled Group ID number.
[ ]
Root Menu: Go to Audio source OSD.
Main Menu: Move the highlight bar down to adjust the selected
item.
IRDaisyChainMenu: Decrease controlled Group ID number.
[ ]
Main Menu: go to previous level menu.
Source Menu: Exit source menu.
VolumeMenu: Decrease Audio Volume.
[ ]
Main Menu: go to next level menu or set selected option.
Source Menu: Go to selected source.
VolumeMenu: Increase Audio Volume.
7
[ ] button
Root Menu: Go to IR daisy chain OSD in Primary/Secondary mode.
Main Menu: Conrm an entry or selection.
8
[ ] ADJUST button
Go to Auto Adjust OSD for VGA only.
9
[ ] MUTE button
Toggle Audio Mute/Unmute.
10
[ ] [ ] [ ] [ ] COLOR buttons
Choose tasks or options.(for Media Input only)
[ ]
Hot key for Window selection function.
1
[ ] POWER button
Power ON/OFF.
2
[PLAY] buttons
Control playback of media les.(for Media Input only)
Freezefeature
Pause: Freeze hot key for all inputs content.
Play: Unfreeze hot key for all input content.
3
[ ] SOURCE button
Root Menu: Go to Video source OSD.
4
[ ] HOME button
Root Menu: Go to Main Menu OSD.
Others: Exit OSD.
11
[Number/ ID SET/ ENTER] button
Enter text for network setting.
Press to set the display ID. Refer to 2.3.2. ID Remote Control
for more detail.
12
[ ] FORMAT button
Change Image Zoom Mode [Full][4:3][Real][21:9][Custom].
13
[ ] BACK button
Return to the previous menu page or exit from the previous
function.
14
[ ] INFO button
Show Information OSD
15
[ ] OPTIONS button
No function.
16
[ ] [ ] VOLUME button
Adjust volume.
6
65BDL3050Q
2.3.2. ID Remote Control
You can set the remote control ID when you want to use this remote
control on one of several different displays.
Press [ID] button. The red LED blinks twice.
1. Press [ID SET] button for more than 1 second to enter the ID
Mode. The red LED lights up.
Press the [ID SET] button again will exit the ID Mode. The red LED
lights off.
Press the digit numbers [0] ~ [9] to select the display you want to
control.
For example: press [0] and [1] for display No.1, press [1] and [1] for
display No.11.
The numbers available are from [01] ~ [255].
2. Not pressing any button within 10 seconds will exit the ID Mode.
3. If an error pressing of buttons other than the digits occured, wait
1 second after the red LED lights off and then lights up again, then
press the correct digits again.
4. Press [ENTER] button to conrm. The red LED blinks twice and
then lights off.
NOTE:
• Press [NORMAL] button. The green LED blinks twice, indicating the
display is in normal operation.
• It is necessary to set up the ID number for each display before
selecting its ID number.
7
65BDL3050Q
2.3.3. Remote Control buttons on Android
source
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
3)Media Player -> Play -> choose non-empty play list -> press
to play all the media les in the play list.
4) Set media playlist in Boot on Source or Schedule by OSD
menu.
2. Play PDF le
There are 3 ways to play media les.
1) File Manager
Find the pdf le from the File Manager and select it to play.
2) PDF Player -> Play -> choose non-empty play list -> press
to play all the PDF les in the play list.
3) Set pdf playlist in Boot on Source or Schedule by OSD menu.
3. When playing PDF, video or music, press to stop playing.
Then if pressing again, playing will be started from the
beginning of the le.
4. When playing PDF, video or music, press button to pause
playing.
5. All media or pdf les should be put at the folder, which is named
“philips” with sub-folder, under the root directory of the specied
storage (internal/USB/SD Card). All sub-folders (video/photo/music/
pdf) are named by media types and shouldn’t be changed.
videos: {root dir of storage}/philips/video/
photos: {root dir of storage}/philips/photo/
music : {root dir of storage}/philips/music/
pdfs : {root dir of storage}/philips/pdf/
Note that the root directories of three storages are
Internal storage: /sdcard
USB storage: /mnt/usb_storage
SD card : /mnt/external_sd
3
4
] SOURCE button
[
Choose input source.
The button is only controlled by Scalar.
[ ] HOME button
1
[ ] POWER button
Turn the display on or put the display to standby.
The button is only controlled by Scalar.
2
[PLAY] buttons
1. Control playback of media(video/audio/picture) les.
There are 4 ways to play media les.
1) File Manager
Find the media le from the File Manager and select it to play.
2) Media Player -> Compose -> edit or new add playlist ->
choose any media les -> press to play the media le
directly.
Access OSD menu.
The button is only controlled by Scalar.
5
[ ] LIST button
1. In the content of the web page, move the focus up to the next
clickable items.
2. Move the focus up to the next control or widget such as buttons.
6
NAVIGATION buttons
1. Navigate through menus and choose items.
2. In the content of the web page, these buttons are to control the
scroll bar of the screen. Press or is for moving vertical scroll
bar up or down. Press or is for moving horizontal
scroll bar left or right.
3. For PDF les,
»when zoom in/out has been performed,
Press , , or to adjust the position of the
screen.
8
65BDL3050Q
»when zoom in/out has been not performed,
Press to go to the next page.
Press to go to the previous page.
7
[ ] button
Conrm an entry or selection.
8
[ ] ADJUST button
1. In the content of the web page, move the focus down to the next
clickable items.
2. Move the focus down to the next control or widget such as
buttons.
9
[ ] MUTE button
Press to turn the mute function on/off.
The button is only controlled by Scalar.
10
[ ] [ ] [ ] [ ] COLOR buttons
1. : No function on Android source. These two buttons
are only controlled by Scalar.
2. For PDF les,
press button to perform zoom-in;
16
[ ] [ ] VOLUME button
Adjust volume. The buttons are only controlled by Scalar.
press button to perform zoom-out.
After zoom-in or zoom-out, press button to revert the pdf le
to the original size.
11
[Number/ ID SET/ ENTER] button
1. No functions for ID SET and ENTER on Android
source. These buttons are only controlled by Scalar.
2. For PDF le, enter the page number by pressing number buttons
and then press button to jump to the specic page.
12
[ ] FORMAT button
Change picture format. The button is only controlled by Scalar.
13
[ ] BACK button
Return to the previous page or exit from the previous function.
14
[ ] INFO button
1. Display information about current input signal. It is shown by
Scalar.
2. Media Player -> Compose -> edit or new add playlist -> choose
any media les -> press to show the information of the
chosen media le.
15
[ ] OPTIONS button
Open toolbox in Media Player or PDF Player.
1. Media Player ->Compose -> Edit or new add playlist -> press
to open toolbox. Toolbox will be slide from the left side of
the screen.
2. PDF Player ->Compose -> Edit or new add playlist -> press
to open toolbox. Toolbox will be slide from the left side of
the screen.
9
65BDL3050Q
IR-INIR-OUT
HDMI 1 IN HDMI 2 IN
AUDIO OUT
IR-OUT
HDMI 1 IN HDMI 2 IN
3. Connecting External Equipment
3.1. Connecting External Equipment (DVD/VCR/VCD)
3.1.1. Using HDMI video input
DVD / VCR / VCD
HDMI Out
3.2. Connecting a PC
3.2.1. Using VGA input
3.2.2. Using HDMI input
[VGA AUDIO IN]
AUDIO IN
D-SUB
[VGA IN]
HDMI 3 IN HDMI 4 IN
[HDMI IN]
Audio Out
VGA Out
D-Sub 15 pin
PC
HDMI 3 IN HDMI 4 IN
PC
[HDMI IN]
HDMI Out
10
3.2.3. Using DisplayPort input
HDMI 1 IN HDMI 2 IN
DP IN
[DisplayPort IN]
3.3. Connecting Audio Equipment
3.3.1. Connecting an external audio device
65BDL3050Q
PC
DisplayPort Out
[AUDIO OUT] Audio In
AUDIO OUT
Stereo Amplifier
3.4. Connecting Multiple Displays in a Daisy-chain Configuration
You can interconnect multiple displays to create a daisy-chain conguration for applications such as a menu board.
3.4.1. Display control connection
Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2.
DISPLAY 1
PC
[RS-232C]
[RS-232C IN]
[RS-232C OUT] [RS-232C IN]
DISPLAY 2
11
Loading...