Philips 63PF9631D, 63PF9631D-37B User Manual

Return your Product Registration Card or register online at

www.philips.com/usasupport today to get the very most from your purchase.

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once to ensure:

* Proof of Purchase

Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service.

* Product Safety Notification

By registering your product you’ll receive notification directly from the manufacturer - in the rare case of a product recall or safety defect.

* Additional Benefits of Product Ownership

Registering your product guarantees that you’ll receive all of the privileges to which you’re entitled, including special money-saving offers.

Congratulations on your purchase, and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available today.We’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

Most importantly, you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in a PHILIPS product.

P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration Card at once, or register online at:

www.philips.com/usasupport

For Customer Use

Enter below the Serial No., which is located on the rear of the cabinet. Retain this information for future reference.

Model No. __________________________ Serial No. __________________________

Know these

safety symbols

This “bolt of lightning” indicates

uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention

to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING:To reduce the risk of fire or

electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION :Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Visit our World Wide Web Site at http://www.philips.com/usasupport

2572.3 en 22-03-2007 13:16 Pagina 1

Note to the CATV system installer: this reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and,in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong.The wide blade or third prong are provided for your safety.When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. This product may contain lead or mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.

16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design.

• Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 701984, provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure below.

21. Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. a) Warning:To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly,with + and - alignment as marked on the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.)

• Remove batteries when the unit is not used for a long time.

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (

NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

ELECTRIC SERVICE EQUIPMENT

2572.3 en 22-03-2007 13:16 Pagina 2

English

User Manual

Safety warnings . . . . . . . . . . . . . . . . . . . . . . . 2

Getting started . . . . . . . . . . . . . . . . . . . . . . . 3

Use of the remote control RC4405 . . . . . . . . 6

Use of the OPTION button . . . . . . . . . . . . . . 9

Buttons on the right side of the TV . . . . . . . 10

Turn the TV on . . . . . . . . . . . . . . . . . . . . . . 10

First time installation . . . . . . . . . . . . . . . . . . 10

How to navigate through the menus . . . . . . 13

Use of the TV menu settings . . . . . . . . . . . . 15

Adjust picture menu settings . . . . . . . . . 17

Adjust sound menu settings . . . . . . . . . . 20

Adjust feature menu settings . . . . . . . . . 22

How to search for and store TV channels . . 30

Set your preferences . . . . . . . . . . . . . . . . . . 34

Select your connections . . . . . . . . . . . . . . . . 36

Set your clock . . . . . . . . . . . . . . . . . . . . . . . 37

Reset AV settings . . . . . . . . . . . . . . . . . . . . . 38

How to upgrade the TV software . . . . . . . . . 38

Create your favorite list . . . . . . . . . . . . . . . . 39

Electronic Program guide . . . . . . . . . . . . . . . 40

Multimedia Browser . . . . . . . . . . . . . . . . . . . 41

To make video and audio connections . . . . . 44

Side panel overview . . . . . . . . . . . . . . . . . . . 45

Rear panel overview . . . . . . . . . . . . . . . . . . 46

Connect:

a VCR or DVD recorder . . . . . . . . . . . . 47

arecorder and other A/V devices . . . . . .48

a recorder and Cable box with RF output 49 a satellite receiver or Cable box

with A/V outputs . . . . . . . . . . . . . . . . .50

a recorder and satellite receiver or

Cable box with A/V outputs . . . . . . . . 51

a DVD player, or other accessory digital

source devices . . . . . . . . . . . . . . . . . . .52

a device to the HDMI connector . . . . . . 54

a Digital Surround receiver . . . . . . . . . . 55

Record with your recorder . . . . . . . . . . . . . 55

Select connected equipment . . . . . . . . . . . . 55

Audio and video equipment buttons . . . . . . 56

Before calling service . . . . . . . . . . . . . . . . . . 57

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Annex 1 - Philips TV software upgrade

with portable memory . . . . . . . . . . . . . . 59

Annex 2 - Philips TV-Slideshow Format

with background music . . . . . . . . . . . . . 61

Annex 3 - Philips TV - Digital camera

and USB issues . . . . . . . . . . . . . . . . . . . . 63

Annex 4 - Issues referring to connected

peripherals with a HDMI connector . . . . 64

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Product information . . . . . . . . . . . . . . . . . . . 67

Contents

Help?

If this instruction manual does not give an answer or if ‘Before Calling Service’ does not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Serial number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline 1-888-PHILIPS (744-5477)

Model: 63PF9631D/37; 47PF9441D/37 Serial No:

About this User Manual

This manual contains all information you will need to initially install and operate your new TV. Also read the help texts which are being displayed at the bottom of the screen.

2572.3 en 22-03-2007 13:16 Pagina 1

Do not insert the power plug in a wall socket or hang the TV to the wall before all connections are made.

• Place or hang the TV wherever you want, but make sure that air can circulate freely through the ventilation slots. Leave at least 4” to 6” free all around the TV.

• Do not place the TV on a carpet.

• Do not install the TV in a confined space such as a book case or a similar unit.

• To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed in the vicinity.

• Avoid heat, direct sunlight and exposure to rain or water.

• The equipment shall not be exposed to dripping or splashing.

•To prevent damaging the power (AC) cord which could cause a fire or electric shock, do not place the TV on the cord.

Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. And please do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty,please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage. Do not use liquid cleaners or aerosol cleaners.Wipe off saliva or water drops as soon as possible.Their long time contact with the screen causes deformations and color fading.

A characteristic of LCD and Plasma Display Panels is that displaying the same image for a long time can cause a permanent after-image to remain on the screen. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen.

Examples of stationary images (this is not an all-inclusive list, you may encounter others in your viewing):

• TV menus;

• Black bars: when black bars appear at the left and right side of the screen, it is recommended to change to a picture format so that the picture fills the entire screen;

• TV channel logo: present a problem if they are bright and stationary. Moving or low-contrast graphics are less likely to cause uneven aging of the screen;

• Stock market stickers: presented at the bottom of the TV screen;

• Shopping channel logos and pricing displays: bright and shown constantly or repeatedly in the same location on the TV screen. Examples of still pictures also include logos, computer images, time display, teletext and images displayed in 4:3 mode, static images or characters,etc.

Installing the TV requires special skills that should only be performed by qualified personnel.You should not attempt to do the work yourself. Philips bears no responsibility for improper mounting or mounting that results in accident or injury. Make sure that the wall mount is being fixed securely enough so that it meets safety standards.

• Philips Royal Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electro magnetic signals.

• One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

• Philips is committed to develop, produce and market products that cause no adverse health effects.

• Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.

• Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.

Your TV display is made with high-precision technology with a high number of colour pixels.Although it has effective pixels of 99,999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural property of the display (within common industry standards) and is not a malfunction.

General

Care of the screen

Warning concerning stationary images on the TV screen

Caution

Safety warnings

Electric, Magnetic and Electromagnetic Fields (“EMF”)

Notes:

- reduce contrast and brightness when viewing

- once burn-in occurs it will never disappear completely.

Carefully pay attention to these remarks. The warranty does not apply to damage caused by not taking into account the above mentioned warnings on stationary images.

Pixel characteristics

2572.3 en 22-03-2007 13:16 Pagina 2

Getting started

English

User Manual

Before installing your TV or before hanging it on the wall, first connect your accessory devices. See To make video and audio connections, p. 44.

There is a wide range of audio and video devices that can be connected to your TV. See To make audio and video connections, p. 44.

AV1 can handle YPbPr,VIDEO, S-VIDEO, RGB-HV and L/R Audio, AV2 can handle VIDEO, S-VIDEO and L/R Audio, AV3 can handle YPbPr, HDMI 1 and 2 can handle Digital video and audio,

Side can handle VIDEO or S-VIDEO, L/R Audio and USB, Service UART :For use only by authorized service personnel.

Note for installers/integrators : Do not connect RS232 without level shifter.

Supported video formats: 480i, 480p, 720p, 1080i.

Warning: do not insert the power plug into the mains at the bottom of the TV and in a wall socket

before all connections are made.

LPrH

RPbV

PbL

S-VIDEO

AV2

AV3

AV1

VIDEO

DIGITAL AUDIO IN

HDMI 1

UART

SERVICE

HDMI 2 ANTENNA

DIGITAL AUDIO OUT

DISPLAY SYNCHRONIZED

oooo

AUDIO

OUT

DISPLAY SYNCHRONIZED

LPrH

RPbV

PbL

S-VIDEO

AV2

AV3

AV1

VIDEO

DIGITAL AUDIO IN

HDMI 1

UART

SERVICE

HDMI 2 ANTENNA

DIGITAL AUDIO OUT

DISPLAY SYNCHRONIZED

oooo

AUDIO

OUT

DISPLAY SYNCHRONIZED

Warning: disconnect all power sources before making any connections.

Before you start

Overview of the rear connector panel

2572.3 en 22-03-2007 13:16 Pagina 3

Connect to the TV

Getting started (Continued)

Your Philips Digital TV will allow you to enjoy digital programs directly from your cable or off air. Connect directly to the TV or connect via your current cable box or Satellite Receiver box.

• Directly to the TV (you will not be able to receive pay

channels)

1. Connect the cable TV signal or the incoming antenna signal to the

CABLE/ANTENNA 75 Ω x jack at the bottom of

the TV.

2. See page 31 for details on using Autoprogram to store channels in the TV’s memory.

• Via a cable box or Satellite box

1. Maintain the connection of the TV cable of your home into your cable box (or satellite receiver box).

2. Connect your Cable box (or satellite receiver box) to the back of the TV using the best connection options. See to make audio and video connections, p. 44.

3. Select the source using the

AV button on the remote

control.

4. Press the

OK button to confirm your selection.

For more information, please refer to your cable box (or satellite receiver box) manual.

Notes:

-Broadcasters are in the middle of a transition from analog to digital TV. This means that a given broadcaster will have two channels on the air, one analog and one digital.

- This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

ANTENNA

CABLE

LPrH

RPbV

DIGITAL AUDIO IN

S-VIDEO

AV2

AV3

AV1

VIDEO

Cable box / SAT

VIDEO

AV2 :

L + R + VIDEO

ANTENNA

CABLE

OUTIN

SIGNAL

SPLITTER

-To connect a camera, camcorder or game, see To make video and audio connections, p. 44.

-To connect a headphone, see To make video and audio connections, p. 44.

-To connect a USB device, see Multimedia browser, p. 41.

Overview of the side connector panel

2572.3 en 22-03-2007 13:16 Pagina 4

Connect the mains

Getting started (Continued)

English

User Manual

Warning:verify that the power supply voltage corresponds to the voltage printed on the sticker at the back of the TV. Contact your local dealer if your power supply is different.

< Insert the power cord supplied into the mains at the

bottom of the TV and in the wall socket.

Remote control

< Insert the 2 batteries supplied (Type R6-1,5V).

Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.)

For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.

Note:Watching Cable TV programs that don’t require the cable box

Since you’ve connected the cable TV signal directly to the TV’s tuner, you can also watch the unscrambled programs by simply tuning to the desired channel.You must first use Autoprogram, however, to store channels in the TV’s memory. See page 34. This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

2572.3 en 22-03-2007 13:16 Pagina 5

Use of the remote control RC4405

POWER

Press to turn on/off the TV from or to standby mode.

TV Press to select TV mode.

DVD STB VCR AUX

Press to select one of the system modes in which the remote control can be used.

DEMO Demo on/off

See p. 29.

Color buttons

When functions are attached to the color buttons, the color buttons are shown on screen.

OPTION

To open and close the Quick access menu which contains a few frequently used options, like Closed captions, Picture format,...

GUIDE

To open and close the Electronic Program Guide. See EPG (Electronic Program Guide) p. 40.

Cursor buttons

Press the cursor buttons up/down, left/right to navigate through the menus.

OK - to activate a setting

- to display the list of channels stored (according to the selection made in the Installation mode - Antenna or Cable, p. 31.)

- starts playing content in the Multimedia Browser application, p. 41.

MENU Settings menu on/off. See p. 13.

FAV - to display the channel list

- you can create up to four favorite lists.

GUIDEGUIDE

SELECTSELECT

FORMATFORMAT

POWERPOWER

FAVFAV

CHVOL

MUTEMUTE

INFO PIP A/CH

PHILIPS DEVICE CONTROLPHILIPS DEVICE CONTROL

INPUTINPUT

Attention: the TV is never powered off completely unless it is physically unplugged.

Attention: this remote control can not be programmed to work accessory devices.

Note: If necessary (in some cases), you can adjust the

picture position to the center of the screen with the cursor buttons.

2572.3 en 22-03-2007 13:16 Pagina 6

Use of the remote control RC4405 (Continued)

English

User Manual

VOL Volume

Press + or - to adjust the volume.

MUTE

Interrupt the sound or restore it.

CH Channel selection

-To browse through the TV channels or sources stored and marked in the selected Favorite channels list (see p. 39);

-To quickly browse through the list in the menus;

-To select between Antenna or Cable TV channels, first make your selection in the Installation menu, Channels, Installation mode, see p. 33.

Numeric buttons

To select a TV channel.

SELECT AV INPUT Press repeatedly to select AV1 , AV 2,

AV3, HDMI, Side or TV channels when in TV mode,

according to where you connected the accessory devices (p. 44).

- Type the dash (-) for digital channels.

Ò‡π†® Audio and Video equipment buttons

See Audio and Video equipment buttons, p. 56. See Multimedia browser functional buttons, p. 43.

INFO

Display information: Press to display (when available) information about the selected TV channel and program or accessory device.

PIP no function

A/CH

Press to alternate between the currently viewed channel and the previously viewed channel.

SELECTSELECT

PHILIPS DEVICE CONTROLPHILIPS DEVICE CONTROL

INPUTINPUT

GUIDEGUIDE

FORMAT

POWERPOWER

FAVFAV

CHVOL

MUTEMUTE

INFO PIP A/CH

Note:You don’t have to start the installation again once you have searched for and stored the available TV channels.

2572.3 en 22-03-2007 13:16 Pagina 7

Use of the remote control RC4405 (Continued)

FORMAT

Press this button to summon a list of available display formats (depending on the receiving signal).This lets you choose the display format of your preference. Press this button repeatedly to select another picture format:Automatic, Super zoom, 4:3, Movie expand 14:9, Movie expand 16:9 or Wide screen.

Automatic makes the picture fill the screen as much as possible. Super zoom removes the black bars on the sides of 4:3 programs with minimal distortion. When in Movie expand 14:9, Movie expand 16:9 or Super zoom picture format, you can make subtitles visible with the cursor up/down.

SELECTSELECT

PHILIPS DEVICE CONTROLPHILIPS DEVICE CONTROL

INPUTINPUT

GUIDEGUIDE

FORMATFORMAT

POWERPOWER

FAVFAV

CHVOL

MUTEMUTE

INFO PIP A/CH

Automatic

Super zoom

4:3

Movie expand 14:9 Movie expand 16:9

Note:With HD sources not all screen formats will be

available.

Wide screen

2572.3 en 22-03-2007 13:16 Pagina 8

Use of the OPTION button

English

User Manual

The

OPTION button allows you to display the Quick access

menu which will give you direct access to some features and menu options.

1. Press the

OPTION button.

> The Quick access menu appears.

2. Press the cursor up/down to select a menu item.

3. Press the

OK button to jump to the selected menu item in

the TV menu (except for the clock option).

4. Use the cursor buttons to make a selection.

5. Press the

OPTION button to exit.

PHILIPS DEVICE CONTROLPHILIPS DEVICE CONTROL

GUIDEGUIDE

FORMAT

POWER

FAV

. . . .

Note: digital related menu items will only be accessible in case of digital TV broadcasting.

Audio language

See Adjust Sound menu settings, p. 20.

Closed captions

See Adjust Feature menu settings, p. 22.

Picture format

See Adjust Picture menu settings, p. 19, or Use of the remote control, Format button, p. 8.

Equalizer

See Adjust Sound menu settings, p. 20.

Clock

Select to activate/deactivate the clock display on the screen.

Quick access

Audio language

Closed captions

Picture format

Equalizer

Clock

2572.3 en 22-03-2007 13:16 Pagina 9

Turn the TV on

Buttons on the right of the TV

Should your remote be lost or broken you can still change some of the basic settings with the buttons on the right side of your TV. Press the power switch B to switch the TV on.

The

MENU button can be used to summon

the

TV menu without the remote control.

Usethe

VOLUME + and - buttons and the

PROGRAM/CHANNEL + and - buttons to

select menu items.

VOLUME

PROGRAM/CHANNELMENU POWER

Note: if the TV has already been installed before and/or you want to change the First time installation settings, proceed with Use of the TV menu settings, p. 15.

First time installation

The installation procedure consists of a series of screens that will guide you through the installation of your TV. Follow the instructions on screen.

< Press the power switch B at the right side of the TV.

> An indicator on the front of the TV lights up.

< Press the

+CH- button or the POWER button on the

remote control.

Note: the first time (and only the first time) you turn on your TV, you see a Welcome screen followed by the installation procedure. See First time installation below.

2572.3 en 22-03-2007 13:16 Pagina 10

First time installation (continued)

English

User Manual

After the Welcome screen you are asked to select a language of the TV's on-screen menus.The text of the header and the info on screen continuously change language.

1. Press the cursor up/down to highlight your language.

2. Press the

OK button on the remote control.

3. Follow the instructions on screen to proceed.

Step 1: select your on-screen language

1. Press the green color button on your remote control to start the television installation.

2. Select Cable or Antenna in the Installation mode and press the green color button. > When Antenna is selected, the TV will detect antenna

signals and will search for antenna TV (NTSC and ATSC) channels available in your local area.

> When Cable is selected, the TV will detect cable

company supplied signals and will search for cable TV (NTSC, ATSC, QAM modulated) channels available in your area.

3. Press the green color button on your remote control to start the Automatic channel installation. > All available TV channels are searched for and stored

automatically.This will take a few minutes.When the search is complete, the menu will indicate the number of digital and analog channels found.

4. Press the red color button when the search is completed.

Step 2: complete the initial TV installation procedure

PHILIPS DEVICE CONTROLPHILIPS DEVICE CONTROL

GUIDEGUIDE

FORMAT

POWER

FAV

CHVOL

MUTEMUTE

Previous Next Skip Stop

PHILIPS Television installation

System searching: please wait..........

Digital channels found 16

Analog channels found 22

Stop

PHILIPS Installation

This will help you to install the following sections:

Television installation

Settings assistant

Menu language

English

Español

Français

Português

.............

Please select your

language.....

PHILIPS

using cursor up and

down

Note: if you choose to install the channels at a later time, select Autoprogram in the TV menu, Installation, Channels to scan available channels.

2572.3 en 22-03-2007 13:16 Pagina 11

First time installation (Continued)

By means of several split screens/full screens you are prompted to select your preferred picture and sound settings, to finally arrive at a complete setting which satisfies you.

1. Press the green color button on your remote control to enter the Settings assistant menu.

2. Select your Location with the cursor up/down and press the green color button. > If you choose Shop it will skip the Settings assistant.

The TV parameters for Picture and Sound will then be set to predefined fixed settings. Press the green color button again to proceed.

> If you choose Home it will display the Settings

assistant.

3. Use the cursor left/right to each time select your preferred screen.

4. Press the green color button to each time confirm your selection and to jump to the following screen. > The following items will be presented sequentially.

In the header it is mentioned how many screens have been completed and how many screens there are in total.The Settings assistant will step sequentially through the following settings: Picture and Sound.

5. Press the green color button twice to store all the settings and to return to the TV installation menu.

6. Press the red color button to finish the First time installation procedure and to display the first stored TV channel.

Note: when you skip or stop the Settings Assistant, then the Standard settings Philips selected for you will be chosen.

Note:any time you can change or reset your settings or adjust individual settings for Picture and Sound in the TV settings menu. See p. 15, Use of the TV menu settings. To control the settings of special TV functions, features and accessory equipment. See p. 22, Adjust feature menu settings.

Step 3: Settings assistant: select your TV settings

PHILIPS Settings assistant

Please select your location before

continuing:

Home

Shop

2572.3 en 22-03-2007 13:16 Pagina 12

How to navigate through the menus

English

User Manual

A lot of guiding instructions, help texts and messages will be displayed on your TV when you use the menus or when you try to execute an action. Read the help texts which are being displayed on the specific item highlighted. The color button at the bottom of the screen refer to the different actions which may be executed. Press the corresponding color button on the remote control to perform the required or desired action.

1. Press the

MENU button on the remote control.

> The main menu appears on the screen.

- TV menu allows you to access the TV menu. See below.

- Channel list allows you to access the TV channel list and to create up to four favorite lists with your preferred TV channels. See Create your favorite channel list, p. 39.

- Multimedia allows you to access the Multimedia browser application. It lets you display your personal multimedia files. Multimedia is only present when a USB device is connected. See Multimedia browser, p. 41.

2. Use the cursor up/down to highlight and select a menu item.

3. Use the cursor right to enter the highlighted menu item. > The right panel shows the content of the highlighted

menu item.

PHILIPS DEVICE CONTROL

GUIDEGUIDE

FORMATFORMAT

POWER

FAVFAV

CHVOL

MUTEMUTE

Introduction

Television

Multimedia

TV menu

Channel list

Info

TV menu

TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2572.3 en 22-03-2007 13:16 Pagina 13

How to navigate through the menus (continued)

4. Use the cursor up/down to select a menu item.

- TV settings allows you to adjust your preferred picture

and sound settings

- Features allows you to control the settings of special TV

features

- Installation allows you

- to select your menu language;

- to search for and store your TV channels;

- to do a weak ATSC digital channel installation;

- to set or adjust various special functions;

- to select connected peripheral equipment;

- to reset your picture and sound settings to the factory standard settings;

- to upgrade your TV software.

5. Press the cursor right to enter the highlighted menu item.

> The content of the right panel is moved to the left panel

and the right panel now shows the content of the newly highlighted item in the left panel.

6. Press the

MENU button to exit the main menu.

Note: in some cases it is important that the picture can be

watched while you adjust the settings.This means that when the highlight is on the right side panel, the other menu items hide away.When the cursor left is pressed, the hidden menu items reappear and the highlight moves to the left panel.

Info

TV menu

TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2572.3 en 22-03-2007 13:16 Pagina 14

Use of the TV menu settings

English

User Manual

Each time you've made a selection, press the green color button to confirm your selection.

1. Select Settings assistant and press the cursor right.

> By means of several split screens/full screens you are

prompted to select your preferred picture and sound settings to finally arrive at a complete setting which satisfies you. See First time installation, Step 3: Settings assistant: select your TV settings, p. 12.

2. Press the green color button to return to the TV menu again.

A. Change settings in an easy-to-use manner with the

Settings assistant

1. Press the

MENU button on the remote control.

> The main menu appears on the screen.

2. Select TV menu and press the cursor right. > The TV menu is displayed.

3. Select TV settings and press the cursor right. > The TV settings menu is moved to the left.

4. Press the

MENU button to exit the menu.

To make it easier to change the settings of the TV, there are 3 ways of doing it.

Adjust viewing and listening settings

The TV menu allows you to access and change settings and preferences in case you want to change the First time installation settings and/or you want to control the settings of special TV functions, features and peripheral equipment

Television

Multimedia

TV menu

Channel list

Info

TV menu

TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2572.3 en 22-03-2007 13:16 Pagina 15

Use of the TV menu settings (continued)

< Select Picture or Sound and press the cursor right.

> A menu appears which allows you to fine tune the

picture and sound settings.

> To adjust the Picture settings, see Adjust picture menu

settings, p. 17.

> To adjust the Sound settings, see Adjust sound menu

settings, p. 20.

C. Individual settings for picture and sound

This allows you to reset your settings for viewing and listening to predefined factory settings.

1. Select Reset to standard and press the cursor right. > A menu appears which allows you to select one of the

standard settings for viewing and listening.

> Current shows your current settings for viewing and

listening.

> If you select Natural, it allows you to set your picture

and sound settings to the recommended standard values. In most cases this will give the best balanced viewing experience.

> If you select Vivid, it allows you to set your picture and

sound settings to rich values, making use of the TV capabilities to its full extend.

> If you select Subtle, it allows you to set your picture

and sound settings to the purest representation of the original source content.

2. Press the green color button to store the selected setting.

B. Use of the Standard settings

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Reset to standard

Current

Natural

Vivid

Subtle

2572.3 en 22-03-2007 13:16 Pagina 16

Adjust picture menu settings

English

User Manual

The picture menu contains the settings that affect the quality of the picture.

1. Press the MENU button on the remote control.

> The main menu appears.

2. Select TV menu and press the cursor right.

> The TV menu is moved to the left.

3. Select TV settings and press the cursor right.

> The TV settings menu is moved to the left panel.

4. Select Picture and press the cursor right.

> The Picture menu is moved to the left panel.

5. Use the cursor up/down to select the Picture menu items.

6. Press the cursor right to enter the selected Picture menu

item.

7. Use the cursor buttons to adjust the settings.

8. Press the cursor left to return to the Picture menu.

Contrast

Adjusts the intensity of bright parts in the picture but keep the dark parts unchanged.

Brightness

Adjusts the light output of the complete picture, which will mainly affect the darker areas of the picture.

Color

Adjusts the saturation level of the colors to suit your personal preference.

Tint

Allows you to select the color mix (tint) of the picture.

Sharpness

Adjusts the sharpness of fine details in the picture.

Color temperature

Increases or decreases Warm (red) and Cool (blue) colors to suit personal preferences.

< Select Cool to give the white colors a blue, Normal to

give the white colors a neutral, Warm to give the white colors a red tint.

< Select Custom to make a customized setting in the

Custom color temperature menu item.

Info

TV menu

TV settings

Picture

Contrast

Brightness

Color

Tint

Sharpness

Color temperature

..............

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2572.3 en 22-03-2007 13:16 Pagina 17

Adjust picture menu settings (Continued)

Custom color temperature (only when Color

temperature is set to Custom) Fine tunes the white point (

WP) and black level (BL) of

the picture.

1. Select

Custom color temperature and press the

cursor right.

2. Use the cursor buttons to select and adjust the settings of:

R-WP: allows you to customize the color temperature

by adjusting the red whitepoint of the picture.

G-WP: allows you to customize the color temperature

by adjusting the green whitepoint of the picture.

B-WP: allows you to customize the color temperature

by adjusting the blue whitepoint of the picture.

R-BL: allows you to customize the color temperature by

adjusting the red blacklevel of the picture.

G-BL: allows you to customize the color temperature

by adjusting the green blacklevel of the picture.

3. Use the color button to reset to the predefined settings.

4. Press the cursor left to return to the Picture menu.

Pixel Plus

Pixel Plus is the most ideal setting, as it fully processes the image to make every single pixel the best it can be, improving contrast, sharpness, picture depth, and color reproduction and brilliance from every source, including High Definition.

< Select On or Off to activate/de-activate Pixel Plus.

Dynamic contrast

Automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on the screen changes.

< Normally select Medium. It may be preferred to select

Minimum, Maximum or Off.

DNR

DNR automatically filters out and reduces the image

noise.This improves picture quality when receiving weak signals.

< Select Off, Minimum, Medium or Maximum according

to the image noise in the picture.

Info

TV menu

TV settings

Picture

.............

Custom color temp.

Pixel Plus

Dynamic contrast

DNR

.............

Settings assistant

Reset to standard

Picture

Sound

2572.3 en 22-03-2007 13:16 Pagina 18

Adjust picture menu settings (Continued)

English

User Manual

MPEG artifact reduction

MPEG artifact reduction On smoothens the

transitions on digital content.

< Select On or Off.

Color enhancement

Automatically controls green enhancement and blue stretch. It makes the colors more vivid.

< Select Off, Minimum, Medium or Maximum.

Active control

The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.

< Select On or Off to activate/de-activate Active control

Picture format

This allows you to adjust the size of the picture dependent on the broadcasted format and your preferred setting.

How to navigate through the TV settings menu, see p. 12: Use of the TV menu settings. Choose among the following picture formats:Automatic, Super zoom, 4;3, Movie Expand 14:9, Movie Expand 16:9 or Wide screen.

Automatic makes the picture fill the screen as much as possible. In case of subtitles in the bottom black bar,Automatic makes the subtitles visible. In case of a broadcaster logo in the corner of the top black bar, the logo disappears from the screen. Super zoom removes the black bars on the sides of 4:3 programs with minimal distortion. When in Movie Expand 14:9, Movie Expand 16:9 or Super zoom screen format, you can make subtitles visible with the cursor up/down.

Automatic Super zoom

4:3

Movie expand 14:9

Movie expand 16:9 Wide screen

Note: with HD sources not all picture formats will be available.

Tip: this function is also accessible via the OPTION button on the remote control.

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Picture

.............

MPEG artifact red...

Color enhancem..

Active control

Picture format

2572.3 en 22-03-2007 13:16 Pagina 19

+ 49 hidden pages