Philips 65PUS6262, 6262, 55PUS6262, 49PUS6262, 43PUS6262 User Manual

...
Register your product and get support at
www.philips.com/welcome
6262 series
User Manual
43PUS6262 49PUS6262
50PUS6262
55PUS6262

Contents

1 Get Support 3
1.1 Identify and Register your TV 3
1.2 TV Help and User Manual 3
1.3 On-line Help and User Manual 3
1.4 Consumer Care / Repair 3
2 Software 4
2.1 Update Software 4
2.2 Software Version 4
3 Quick Guide 5
3.1 Remote Control 5
3.2 IR sensor 6
3.3 Joysticker - Local Control 6
4 Setting Up 8
4.1 Read Safety 8
4.2 TV Placement 8
4.3 Turn on TV 8
5 Connections 10
5.1 Connectivity guide 10
5.2 Antenna 10
5.3 Satellite 10
5.4 Video Device 10
5.5 Audio Device 11
5.6 Mobile Device 12
5.7 Other Device 13
6 Switch Source 16
6.1 Source List 16
6.2 Rename Device 16
6.3 Re-scan Connections 16
7 Channels 17
7.1 About Channels and Switch Channels 17
7.2 Install Channel 17
7.3 Channel List 22
7.4 Favourite Channels 23
7.5 Text / Teletext 24
8 TV Guide 25
8.1 What You Need 25
8.2 Using the TV Guide 25
8.3 Freeview Play 26
9 Recording and Pause TV 27
9.1 Recording 27
9.2 Pause TV 28
10 Videos, Photos and Music 29
10.1 From a USB Connection 29
10.2 Photos 29
10.3 Videos 29
10.4 Music 30
11 Open TV Setting Menus 31
11.1 Home Menu Overview 31
11.2 Utilities Menu 31
11.3 Quick Settings and All Settings 31
11.4 All Settings 31
12 Network 40
12.1 Home Network 40
12.2 Connect to Network 40
12.3 Network Settings 41
13 Smart TV 42
13.1 Setup Smart TV 42
13.2 Smart TV Start Page 42
13.3 App Gallery 42
13.4 Multi View 42
14 Ambilight 43
14.1 Ambilight Style 43
14.2 Ambilight Brightness, Saturation 43
14.3 Ambilight+hue 43
14.4 Advanced Ambilight Settings 44
15 Netflix 46 16 Environmental 47
16.1 European Energy Label 47
16.2 Product Fiche 47
16.3 End of Use 47
17 Specifications 49
17.1 Power 49
17.2 Reception 49
17.3 Display Resolution 49
17.4 Supported Input Resolution - Video 49
17.5 Supported Input Resolution - Computer 49
17.6 Sound 50
17.7 Multimedia 50
17.8 Connectivity 50
18 Troubleshooting 51
18.1 Tips 51
18.2 Switch On 51
18.3 Remote Control 51
18.4 Channels 51
18.5 Satellite 52
18.6 Picture 52
18.7 Sound 53
18.8 HDMI - UHD 53
18.9 USB 54
18.10 Wi-Fi and Internet 54
18.11 Wrong Menu Language 54
19 Safety and Care 55
19.1 Safety 55
19.2 Screen Care 56
20 Terms of Use 57 21 Copyrights 58
21.1 MHL 58
21.2 Ultra HD 58
21.3 HDMI 58
21.4 Dolby Audio 58
21.5 DTS 2.0 + Digital Out ™ 58
21.6 Wi-Fi Alliance 58
21.7 Other Trademarks 58
22 Open Source 59
22.1 Open Source Software 59
22.2 Open Source License 59
23 Disclaimer regarding services and/or software offered by third parties 63
Index 64
2
1
1.3
Get Support
1.1
Identify and Register your TV
Identify your TV - TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Register your TV
Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.
Go to www.philips.com/welcome
On-line Help and User Manual
To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.
Go to www.philips.com/support. On the support site you can find your country's
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer.
For more TV troubleshooting and frequently asked questions (FAQs)...
Go to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
1.2
TV Help and User Manual
Settings > Help
You can use Help function to diagnose and get more information about your TV.
Check the TV - You can check if the picture, sound, Ambilight* are working fine during playing a short video clip.
Check the network - Check the network connection.
Update software - Check available software updates.
User manual - Read the user manual for TV information.
Troubleshooting - Find a solution for frequent ask questions.
Factory settings - Reset all settings to factory settings.
Reinstall TV - Reinstall and redo the complete TV installation.
Contact info - Show the telephone number or web address for your country or region.
* Ambilight is only for xxPUS6272, xxPUS6262, xxPUT6262 TV models.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/support
1.4
Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary.
Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support and select your country if needed.
TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may cause severe injury, irrepairable damage to your TV or void your warranty.
3
2
Software
2.1
Update Software
Search for Updates
Update from Internet
(Home) > Settings > Update software > Search
for updates > Internet Look for a software update yourself.
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
• press  twice
• press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait.
The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device.
• If the TV is connected to the Internet, you may receive a message to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you to carry out the update.
• During the software update, there is no picture and the TV will switch off and on again. This might happen several times. The update can take a few minutes.
• Wait until the TV picture comes back up. Do not press the power switch  on the TV or on the remote control during the software update.
Update from USB
(Home) > Settings > Update
software > Search for updates > USB
• You need a computer with an high-speed Internet connection and a USB memory device to upload the software on the TV.
• Use a USB memory device with 512MB free space. Make sure that write protection is switched off.
1 - Start the update on TV
Select Update software > Search for updates > USB, then press OK. 2 - Identify the TV
Insert the USB memory into one of the USB connections of the TV. Select Start and press OK. An identification file is written on the USB memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the file update.html and double click it.
- Click on Send ID.
- If new software is available, download the .zip file.
- After the download, unzip the file and copy the file autorun.upg onto the USB memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update starts automatically. The TV switches itself off for 10 seconds and then
Local Updates
(Home) > Settings > Update software > Local
updates. For dealers and expert users.
Look for OAD updates (Over-the-air Download)
(Home) > Settings > Update software > Look
for OAD updates. Scan to search for an Over-the-air software update.
2.2
Software Version
(Home) > Settings > Update
software > Current software Info To view the current TV software version.
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote control, the batteries might be empty.
To replace the batteries, open the battery compartment on the back of the remote control.
1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until it clicks.
• Remove the batteries if you are not using the remote control for a long time.
• Safely dispose of your old batteries according to the end of use directions.
Cleaning
1 -  Standby / On
To switch the TV on or back to Standby. 2 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to start recording 3 -
To select one of the Ambilight style or switch off Ambilight.
4 -  TV GUIDE To open or close the TV Guide.
5 -  Search To open the Smart TV searches page.
6 - Settings To open the Quick settings menu.
7 - SOURCES To open the Sources menu.
8 -  LIST To open or close the channel list.
Ambilight
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
Key Overview
Top
Middle
1 -  Home
To open the Home menu.
5
2 -  SMART TV To open the Smart TV start page.
4 - SUBTITLE To switch subtitles on, off or to show automatically.
3 -
Direct selection of options. Blue key , opens Help. 4 -  INFO
To open or close programme info. 5 -  BACK
To close a menu without changing a setting.
6 -  - EXIT
To switch back to watch TV. To stop an interactive TV application.
7 -  OPTIONS To open or close the Options menu.
8 - OK key To confirm a selection or setting. To open the channel list while watching TV.
9 - Arrow / navigation keys To navigate up, down, left or right.
10 -  MULTIVIEW To open an extra small screen.
Colour keys
5 -  Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. To start the next or previous chapter on a disc.
6 ­To mute the sound or to restore it.
7 - TEXT To open or close Text/Teletext.
3.2
Mute
IR sensor
The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
Bottom
1 -
To open the Netflix App directly. With the TV switched on or from standby.
• If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet.
• To open Netflix, press App. You can open Netflix immediately from a TV in standby. www.netflix.com
to open the Netflix
Warning
Do not put any objects in front of IR sensor of the TV, it may block the IR signal.
3.3
Joysticker - Local Control
Keys on TV If you lost the remote control or its batteries are
empty, you can still do some basic TV operations. To open the basic menu…
2 ­To adjust the volume level.
3 - Number keys To select a channel directly.
Volume
1 - With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu. 2 - Press left or right to select  Volume,  Channel or  Sources. Select  Demo, to start a demo movie.
6
3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection.
The menu will disappear automatically.
7
4
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the TV.
To read the instructions, in Help > User manual, press the colour key  Keywords and look up Safety and Care.
4.2
TV Placement
Tips on Placement
• Position the TV where light does not shine directly on the screen.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch Ultra HD TV is 2 to 5 times of its screen height. When seated, your eyes should be level with the centre of the screen.
• 43PUx6262
VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 14 mm)
• 49PUx6262
VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 14 mm)
• 50PUx6262
VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 14 mm)
• 55PUx6262
VESA MIS-F 300x200, M6 (Minimum 10 mm, Maximum 14 mm)
• 65PUx6262
VESA MIS-F 400x200, M6 (Minimum 10 mm, Maximum 16 mm)
Preparation
First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
TV Stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.
Use the model number of the TV to look for the Quick Start Guide to download.
Wall Mounting
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
4.3
Turn on TV
Connect Power Cable
• Insert the power cable into the POWER connector on the back of the TV.
• Make sure the power cable is securely inserted in the connector.
• Make sure that the power plug, in the wall socket, is accessible at all times.
• When you unplug the power cable, always pull the plug, never pull the cable.
8
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
On or Standby
Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Switch On
• Press the small joystick key on the back of the TV.
Switch to standby
To switch the TV to standby, press  on the remote control. You can also press the small joystick key on the back of the TV.
In standby mode, the TV is still connected to the mains power but consumes very little energy.
To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
9
5
5.3
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.
If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
Go to www.connectivityguide.philips.com
Satellite
Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
5.4
Video Device
5.2
Antenna
Insert the antenna plug firmly into the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C input signals.
HDMI
An HDMI connection has the best picture and sound quality.
For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m, and also connect devices supporting HDR on HDMI 2 or HDMI 3.
Copy protection
HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu­ray Disc. Also referred to as DRM (Digital Rights Management).
10
Component
Y Pb Pr - Component Video is a high quality
connection. The YPbPr connection can be used for High Definition
(HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound.
5.5
Audio Device
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel).
Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use an Audio L/R cinch cable if your device also has sound.
Composite
CVBS - Composite Video is a standard quality connection. Next to the CVBS signal adds the Audio Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
Digital Audio Out - Optical
Audio Out - Optical is a high quality sound connection.
This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
11
Headphones
Using Miracast
You can connect a set of headphones to the  connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.
5.6
Mobile Device
Wi-Fi Direct / Miracast
Switch on Miracast
Press  SOURCES > Miracast
Share a Screen on TV
1 - Activate Miracast (Screen mirroring) on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast.
Stop Sharing
You can stop sharing a screen from the TV or from the mobile device.
From the device
With the application you use to start Miracast, you can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected programme.
About Wi-Fi Miracast
You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room.
Check if your mobile device is ready for Miracast. Your TV is a Wi-Fi CERTIFIED Miracast™ device.
With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), share photos or anything else that's on screen of the device. No need to connect the device to your home network. Both the TV and the device must be Wi-Fi CERTIFIED Miracast™ devices and have Miracast switched on.
Miracast on this TV is subject to the HDCP protocol and cannot display copy-protected premium content sent by a device. The maximum video resolution supported is 720p for 2.4GHz Wi-Fi or 1080p for 5GHz Wi-Fi.
For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance.
From the TV
To stop watching the screen of the device on TV, you can . . .
• press  EXIT to watch a TV broadcast
• press  (Home) to start another activity on TV
• press  SOURCES to open the Sources menu and select a connected device.
Reset Wi-Fi Miracast connection
All previously connected devices are stored in the Wi­Fi Miracast list of connections.
To clear all connected Miracast devices…
(Home) > Settings > All
settings > Network > Reset Wi-Fi Miracast connection.
Screen Delay
The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices with less processing power.
12
MHL
This TV is MHL™ compliant.
5.7
Other Device
If your mobile device is also MHL compliant, you can connect your mobile device with a MHL cable to the TV. With the MHL cable connected you can share what's on your mobile device on the TV screen. Your mobile device charges its battery at the same time. The MHL connection is ideal for watching movies or playing games from your mobile device on TV for a longer time.
Charging
With the MHL cable connected, your device will charge while the TV is switched on (not in standby).
MHL Cable
You need a passive MHL cable (HDMI to Micro USB) to connect your mobile device to the TV. You might need an extra adapter to connect to your mobile device. To connect the MHL cable to the TV use the HDMI 3 MHL connection.
CAM with Smart Card - CI+
About CI+
This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module. Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection.
Contact a digital TV operator for more information on terms & conditions.
MHL, Mobile High-Definition Link and the MHL Logo are trademarks or registered trademarks of the MHL, LLC.
Apps - Philips TV Remote App
With the TV Remote App, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. Look up what you want to watch on the TV Guide and watch it on your phone or TV. With the TV Remote App you can use your phone as a remote control*.
Download the Philips TV Remote App from your favourite app store today.
The Philips TV Remote App is available for iOS and Android and is free of charge.
* When use your phone as a remote control, TV cannot be switched on or off via your phone.
Smart Card
Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.
Insert the smart card into the CAM module. See the instruction you received from the operator.
To insert the CAM in the TV…
1. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.
2. While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE.
3. Push the CAM in as far as it will go. Leave it in the slot permanently.
When you switch on the TV, it may take a few minutes before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If you remove the CAM, you will no longer be able to watch the scrambled channels supported by the
13
CAM.
USB Flash Drive
You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on.
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press  SOURCES and select USB.
Hard Drive with a minimum of 4GB disk space.
To Record
To pause and record a broadcast, you need a minimum of 250GB disk space. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive.
1 - Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel,
press  (Pause). Trying to pause will start the formatting.
Follow the instructions on screen. When the USB Hard Drive is formatted, leave it
connected permanently.
For more information on watching or playing content from a USB flash drive, in Help, press the colour key  Keywords and look up Photos, Videos and
Music.
USB Hard Drive
Installation
If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB compatible
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
To read the instructions, in Help, press the colour key  Keywords and look up USB Hard Drive.
Formatting
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive. If you want to record broadcasts with TV Guide data from the Internet, you must setup the Internet connection first before you install the USB Hard Drive.
Warning
The USB Hard Drive is formatted exclusively for this
14
TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
To format a USB Hard Drive… 1 - Connect the USB Hard Drive to one of
the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel,
press  (Pause). Trying to pause will start the formatting. Follow the instructions on screen. 4 - The TV will ask if you want to use the USB Hard Drive to store apps, agree to the question if you do. 5 - When the USB Hard Drive is formatted, leave it connected permanently.
15
6
Switch Source
6.1
Source List
• To open the sources menu, press  SOURCES .
• To switch to a connected device, select the device with the arrows  (up) or  (down) and press OK.
• To close the source menu without switching to a device, press  SOURCES again.
6.2
Rename Device
• Only CVBS, YPbPr, HDMI sources can be renamed or replace device icon. 1 - Press  SOURCES , and select CVBS, YPbPr or HDMI.
2 - Press Edit and press OK. 3 - Select one of the device icons and press OK,
the preset name appears in the typing field. 4 - In the typing field, press OK, then enter new name using on-screen keyboard.
- Press  (red) key to enter with lower-case
- Press  (green) key to enter with upper-case
- Press  (yellow) key to enter number and symbol
- Press  (blue) key to delete a character 5 - Select Done when complete the editing.
6.3
Re-scan Connections
You can rescan all TV connections to update the sources menu with recently connected devices.
To rescan the connections…
1 - Press  SOURCES to open the Sources menu. 2 - Press  (up) to select the
right of the sources menu. 3 - Press OK to start scanning the connections.
icon at the top
16
7
Channels
7.1
About Channels and Switch Channels
To watch TV channels
• Press . The TV tunes to the TV channel you last watched.
• Press  (Home) > Channels and press OK.
• Press  + or  - to switch channels.
• If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels.
• To switch back to the previously tuned channel, press  BACK .
To switch to a channel from a channel list
• While watching a TV channel, press  LIST to open the channel lists.
• The channel list can have several pages with channels. To view the next or previous page, press  + or  -.
• To close the channel lists without switching channels, press  LIST again.
Channel icons
After an Automatic channel update of the channel list, newly found channels are marked with a  (star). If you lock a channel, it will be marked with a  (lock).
Radio channels
If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.
This TV can receive digital television standard DVB. TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full.
Re-install all channels
(Home) > Settings > Antenna/cable
installlation > Search for channels > Reinstall channels
1 - Select the country where you are now and press OK. 2 - Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install.
3 - Select Digital and analogue channels, Only digital channels, or Only analogue channels.
4 - Select Start and press OK to update channels. This can take a few minutes.
Channel Settings
(Home) > Settings > Antenna/cable
installlation > Search for channels > Reinstall channels
1 - Select the country where you are now and press OK. 2 - Select Antenna (DVB-T) or Cable (DVB-C) , and select one item you need to re-install.
3 - Select Digital and analogue channels, Only digital channels, or Only analogue channels.
4 - Select Settings and press OK. 5 - Press Reset to reset, or press  Done when
complete the settings.
Frequency scan
Select the method of searching for channels.
Quick: select the faster method and use the predefined settings used by most cable providers in your country.
Full: If this results in having no channels installed or if some channels are missing, you can select the extended Full method. This method will take more time to search for and install channels.
Advanced: If you received a specific network frequency value to search for channels, select Advanced.
7.2
Install Channel
Antenna and Cable
Manually Search for Channels and Channel Settings
Search for Channels Update existing channel list
(Home) > Settings > Antenna/cable
installlation > Search for channels > Update channels
Frequency step size
The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if some channels are missing, you can search in smaller steps of 1MHz. Using the 1MHz steps will take more time to search for and install channels.
Network frequency mode
If you intend to use the fast Quick method in Frequency scan to search for channels, select Automatic. The TV will use 1 of the predefined network frequencies (or HC - homing channel) as used by most cable providers in your country. If you received a specific network frequency value to search for channels, select Manual.
17
Network frequency
With the Network frequency mode set to Manual, you can enter the network frequency value received from your cable provider here. To enter the value, use the number keys.
Network ID
Enter the network ID supplied by your cable provider.
Symbol rate mode
If your cable provider did not give you a specific symbol rate value to install the TV channels, leave the Symbol rate mode setting on Automatic. If you received a specific symbol rate value, select Manual.
Symbol rate
With the Symbol rate mode set to Manual, you can enter the symbol rate value by using the number keys.
Free / Scrambled
If you have a subscription and a CAM - Conditional Access Module for pay TV services, select Free + scrambled. If you did not subscribe to pay TV channels or services, you can select Free
channels only .
Digital: Reception Test
(Home) > Settings > Antenna/cable
installlation > Digital: reception test The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK. To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number with  and  and change the number with  and . To check the frequency, select Search and press OK.
Analogue: Manual Installation
(Home) > Settings > Antenna/cable
installlation > Analogue: manual installation Analogue TV channels can be manually installed,
channel by channel.
System To set up the TV system, select System. Select your country or the part of the world where you are now and press OK.
Automatically Search for Channels
(Home) > Settings > Antenna/cable
installlation > Automatic channel update If you receive digital channels, you can set the TV to
automatically update the list with new channels. Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels.
Channel Update Message
(Home) > Settings > Antenna/cable
installlation > Channel update message When new channels are found or if channels are
updated or removed, a message is shown at TV start up. To avoid this message to appear after every channel update, you can switch it off.
Search Channel To find a channel, select Search Channel and press OK. You can enter a frequency yourself to find a channel or let the TV search for a channel. Press OK, select Search and press OK to search for a channel automatically. The found channel is shown on screen and if the reception is poor, press Search again. If you want to store the channel, select Done and press OK.
Fine tune To fine tune a channel, select Fine tune and press OK. You can fine tune the channel with  or . If you want to store the channel found, select Done and press OK.
Store You can store the channel on the current channel number or as a new channel number. Select Store and press OK. The new channel number is shown briefly.
You can redo these steps until you have found all available analogue TV channels.
18
Satellite
Search for Satellite and Satellite Settings
Search for Satellite Channel
(Home) > Settings > Satellite
installlation > Search for satellite Update existing channel list
(Home) > Settings > Satellite
installlation > Search for satellite > Update channels
Re-install all channels
(Home) > Settings > Satellite
installlation > Search for satellite > Reinstall channels
• Select the group of channels you want to install.
• Satellite operators can offer channel packages that bundle free channels (free-to-air) and offer a sorting that suits a country. Some satellites offer subscription packages - a collection of channels you pay for.
Satellite Settings
(Home) > Settings > Satellite
installlation > Search for satellite > Reinstall channels
1 - Select From a sorted package or All channels unsorted.
2 - Select Settings and press OK. 3 - Press Reset to reset, or
press  Done when complete the settings. Connection type
Select the number of satellites you want to install. The TV sets the appropriate connection type automatically.
Up to 4 Satellites - You can install up to 4 satellites (4 LNBs) on this TV. Select the exact number of satellites you wish to install at the start of the installation. This will speed up the installation.
Unicable - You can use a Unicable system to connect the antenna dish to the TV. You can select Unicable for 1 or for 2 satellites at the start of the installation.
LNB settings
In some countries, you can adjust the expert settings for homing transponder and each LNB. Only use or change these settings when a normal installation fails. If you have non-standard satellite equipment, you can use these settings to overrule the standard settings. Some providers might give you some
transponder or LNB valeus which you can enter here.
• LNB Power - By default, LNB Power is set to On.
• 22 kHz Tone - By default, the Tone is set to Auto.
• Low LO Frequency / High LO Frequency - The local oscillator frequencies are set to standard values. Adjust the values only in case of exceptional equipment that needs different values.
Add Satellite or Remove Satellite
(Home) > Settings > Satellite
installlation > Search for satellite > Add satellite, Remove satellite
(Home) > Settings > Satellite
installlation > Search for satellite > Add satellite
• You can add an additional satellite to your current satellite installation. The installed satellites and their channels remain untouched. Some satellite operators do not allow adding a satellite.
• The additional satellite should be seen as an extra, it is not your main satellite subscription or not the main satellite of which you use its channel package. Typically, you would add a 4th satellite when you have 3 satellites already installed. If you have 4 satellites installed, you might consider removing one first to be able to add a new satellite.
• If you currently have only 1 or 2 satellites installed, the current installation settings might not allow adding an extra satellite. If you need to change the installation settings, you must redo the complete satellite installation. You cannot use Add satellite if a change of settings is needed.
(Home) > Settings > Satellite
installlation > Search for satellite > Remove satellite
You can remove one or more satellites from your current satellite installation. You remove the satellite and its channels. Some satellite operators do not allow removing a satellite.
Automatically Search for Channels
(Home) > Settings > Satellite
installlation > Automatic channel update If you receive digital channels, you can set the TV to
automatically update the list with new channels. Alternatively, you can start a channel update yourself.
Automatic channel update
19
Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All channels list but also in the New channels list. Empty channels are removed. If new channels are found or if channels are updated or removed, a message is shown at TV start up. The TV must be in standby to automatically update channels.
channels of the package only or select All channel unsorted to install the package and all other available channels too. We recommend a Quick installation for subscription packages. If you have additional satellites that are not part of your subscription package, we recommend a full installation. All installed channels are put in the channels list.
* Only available when Satellite channel list is set to
From a sorted package
Channel Update Message
(Home) > Settings > Satellite
installlation > Channel update message When new channels are found or if channels are
updated or removed, a message is shown at TV start up. To avoid this message to appear after every channel update, you can switch it off.
Automatic Update Option
(Home) > Settings > Satellite
installlation > Automatic update option Unselect a satellite if you do not want to update
automatically. * Only available when Satellite channel list is set to
From a sorted package
Satellite CAMs
If you use a CAM – a Conditional Access Module with a smart card – to watch satellite channels, we recommend to do the satellite installation with the CAM inserted in the TV.
Most CAMs are used to descramble channels. CAMs (CI+ 1.3 with Operator Profile) can install all the
satellite channels by themselves on your TV. The CAM will invite you to install its satellite(s) and channels. These CAMs not only install and descramble the channels but also handle regular channel updates.
Channel List copy
Introduction
Channel list copy is intended for dealers and expert
users.
Manual Installation
(Home) > Settings > Satellite
installlation > Manual installtion Manually install satellite.
• LNB - Select the LNB for which you want to add new channels.
• Polarisation - Select the polarisation you need.
• Symbol rate mode - Select Manual to enter symbol rate.
• Frequency - Enter the frequency for the transponer.
• Search - Search for transponder.
Channel Packages
(Home) > Settings > Satellite
installlation > Satellite channel list Satellites can offer channel packages that bundle free
channels (free-to-air) and offer a sorting that suits a country. Some satellites offer subscription packages ­a collection of channels you pay for.
Select From a sorted channel package to install the
With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the same range. With Channel list copy, you avoid the time-consuming channel search by uploading a predefined channel list on a TV. Use a USB flash drive of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware type on the TV type plate on the back of the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Copy a Channel List, Check Channel List Version
Copy a channel list
(Home) > Settings > General
settings > Channel list copy > Copy to USB
Check channel list version
(Home) > Settings > All settings > General
settings > Channel list copy > Current version
20
Loading...
+ 46 hidden pages