Philips 60PP 9352, 55PP 9352 User Manual

3135 035 20532

55PP9352
60PP9352

Product Highlights

• High-definition display—1080i/480p

• High-definition component video/RGB+H/V
and DB15 inputs

• Active Control

™

• Eye Fidelity

•APAC

™

(Automatic Phosphor Aging

Compensation)

Features

• Multipoint digital convergence

• Protective screen filter

• Virtual Dolby

®

Surround

• 3-D Y/C comb filter

• Two-tuner picture-in-picture

• Slim, upscale styling

• Home-cinema universal remote
with backlighting

Rear-projection

Rear-projection

HDTV Monitor

HDTV Monitor

2

Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a
PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to ensure you

receive all the benefits you’re entitled to.

Congratulations

on your

purchase,

and welcome to the

“family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed prod­ucts available today. And we’ll do everything in our power to keep you happy with your purchase
for many years to come.

As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive
warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which
you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction.
All of this is our way of saying welcome–and thanks for investing in a PHILIPS product.

Sincerely,

Lawrence J. Blanford
President and Chief Executive Officer

Know these

safetysymbols

t This “bolt of lightning” indicates uninsulated material within your unit may cause an electri-

cal shock. For the safety of everyone in your household, please do not remove product covering.

s The “exclamation point” calls attention to features for which you should read the enclosed

literature closely to prevent operating and maintenance problems.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty

Verification

Registering your product within
10 days confirms your right to
maximum protection under the
terms and conditions of your
PHILIPS warranty.

Owner

Confirmation

Your completed Warranty
Registration Card serves as
verification of ownership in the
event of product theft or loss.

Model

Registration

Returning your Warranty
Registration Card right away guar­antees you’ll receive all the infor­mation and special offers which
you qualify for as the owner of your
model.

P.S. Remember, to get the most from your PHILIPS

product, you must return your
Warranty Registration Card within 10 days. So
please mail it to us right now!

R

E

G

I

S

T

R

A

T

I

O

N

N

E

E

D

E

D

W

I

T

H

I

N

1

0

D

A

Y

S

Hurry!

Visit our World Wide Web Site at http://www.philips.com

3

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in

accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9. Do not defeat the safety purpose of the polarized or ground­ing-type plug. Apolarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and third grounding prong. The wide blade or third prong
are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.

10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11. Only use attachments/accessories specified by the manu­facturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the app­aratus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when
unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

15. This product may contain lead and mercury. Disposal of
these materials may be regulated due to environmental con­siderations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries

Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged;

or

B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure

damaged.

17. Tilt/Stability - All televisions must comply with recommend­ed international global safety standards for tilt and stability
properties of its cabinet design.

• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.

19. Power Lines - An outdoor antenna should be located away
from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No.
70-1984, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclo­sure through openings.

Example of Antenna Grounding
as per NEC - National Electric Code

Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.

Rev. 8/13/01

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

(NEC SECTION 810-20)

4

CONTENTS

Items Included with This TV

As you unpack your TV, please note that this Directions for Use
manual contains safety-tip information and Factory Service
Center locations, as well as a Warranty Registration Card,
remote control, and batteries for use with the remote control.

Please take a few minutes to complete your registration card. The
serial number for the TV is on the rear of the set.

Refer to the back of this manual for instructions in the cleaning
and care of the TV.

INTRODUCTION

Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . . .2

Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

CONNECTING ACCESSORY DEVICES

TO

YOUR TV

Panel Overviews: Standard Inputs and Outputs . . . . . . . . . .6

Panel Overviews: High-definition Inputs . . . . . . . . . . . . . . .7

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Connecting a VCR and Cable Box . . . . . . . . . . . . . . . . . . . .9

Connecting and Using an Audio Hi-fi System

with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connecting a Standard DVD Player . . . . . . . . . . . . . . . . . .11

Connecting a DVD Player with Progressive-scan

Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Connecting an S-Video Device . . . . . . . . . . . . . . . . . . . . .13

Connecting an HD Receiver to the

HD INPUT-AV 4 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .14

Connecting an HD Receiver to the

HD INPUT-AV 5 Jacks . . . . . . . . . . . . . . . . . . . . . . . . . .15

Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . .16

Connecting and Using Headphones

with Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

USING THE REMOTE CONTROL

Programming the TV Remote to Work

with Accessory Devices . . . . . . . . . . . . . . . . . . . . .18

Using the Code-entry Method to Program Your

TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Using the Search Method to Program Your

TV Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Direct-entry Codes for A/VAccessory Devices . . . . . .21–22

Using the TV Remote with Accessory Devices . . . . . . . . .23

Using the AV and Source Select Buttons . . . . . . . . . . . . . .24

Using AutoSound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Using AutoPicture™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Using AutoSurf™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Using Program List and Alternate Channel (A/CH) . . . . . .28

Using the Sleep Timer Control . . . . . . . . . . . . . . . . . . . . . .29

USING THE ONSCREEN SUBMENUS

PICTURE

Adjusting the Picture Controls . . . . . . . . . . . . . . .30

Setting the Eye Fidelity Control . . . . . . . . . . . . . . . . . . . . .31

Setting the Dynamic Contrast Control . . . . . . . . . . . . . . . .32

SOUND

Adjusting the Treble, Bass, and

Balance Controls . . . . . . . . . . . . . . . . . . . . . . . .33

Using the AVL (Audio Volume Leveler) Control . . . . . . . .34

Selecting the Surround-sound Modes . . . . . . . . . . . . . . . . .35

Selecting the Stereo/Mono Sound Mode . . . . . . . . . . . . . .36

Selecting the SAP (Second Audio Program) Feature . . . . .37

Using the Bass Boost Control . . . . . . . . . . . . . . . . . . . . . .38

FEATURES

The Timer

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Displaying the Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Setting the Timer’s Start Time and Stop Time . . . . . . . . .41

Selecting the Timer’s Channel . . . . . . . . . . . . . . . . . . . . .42

Setting the Timer’s Activate Control . . . . . . . . . . . . . . . .43

AutoLock™

Understanding AutoLock™ . . . . . . . . . . . . . . . . . . . . . . .44

Setting up the AutoLock™Access Code . . . . . . . . . . . . .45

Using AutoLock™ to Block Channels . . . . . . . . . . . . . . .46

Using AutoLock™ to Block by Movie Rating . . . . . . . . .47

Using AutoLock™ to Block by TV Rating . . . . . . . . . . .48

Turning the AutoLock™ Blocking Control

on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Using AutoLock™ to Block Unrated Broadcasts . . . . . . .50

Using AutoLock™ to Block Broadcasts That

Have No Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Reviewing Your Currrent AutoLock™ Settings . . . . . . . .52

Using the Closed Captioning Control . . . . . . . . . . . . . . . . .53

Using the Picture-format Control . . . . . . . . . . . . . . . . .54–55

Using Active Control™ . . . . . . . . . . . . . . . . . . . . . . . . . . .56

APPENDIXES

Appendix A: Compatibility Information

for the TV’s High-definition Inputs . . . . . . . . .57

Appendix B: Model Specifications . . . . . . . . . . . . . . . . . . .58

Appendix C: Setting Color Space for the HD Inputs . . . . . . .59

GENERAL INFORMATION

Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61–62

Glossary of Television Terms . . . . . . . . . . . . . . . . . . . . . . .63

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Factory Service Locations . . . . . . . . . . . . . . . . . . . . . .65–66

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Refer to the simple Quick Use and Setup
Guide (supplied with your TV) for details on

the following:

• Basic TV connections

• Television and remote-control operation

• Onscreen menu controls

• How to use the installation features.

QUICK USE AND SETUP GUIDE

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

MENU/

STATUS/

SELECT

EXIT

ppendixes

BC

A

Quick Use and Setup Guide

Quick Use and Setup Guide

CONTENTS

Important Notice/Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Making Basic TVConnections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1–2

Operating the Television and Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .2–4

Using the Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–6

Using the Picture-in-Picture (PIP) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Adjusting the Manual Converge Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MAKING BASICTV CONNECTIONS

BESTVIEWING

he major benefit of this projection television is its large view-

T

ing screen. To see this large screen at its best, test various

locations in the room to find the optimal spot for viewing.

NOTE:Be sure to allow a free flow of air to and from the per­forated back cover of the set.

CABLESAND CONNECTORS

f you are new to making TVhookups, you may want to read

I

this section. (The cables and connectors discussed are not sup­plied with your set. You can buy them at most stores that sell
audio or video products. Or call our Customer Care Center at
1-800-531-0039.)
This publication provides you with examples of basic connections.
See pages 6–17 in the Directions for Use manual for more infor­mation on connections, along with connection examples.

A75-ohm coaxial cableconnects signals
from an antenna or a cable TVcompany
to the antenna jack on the back of the TV.
Coaxial cables use “F” connectors.
Atwo-way signal splitterenables you to
take a single antenna or cable TVsignal
and supply it to two different inputs.

ANTENNAOR CABLETV

his section shows you how to make a basic TVconnection

using a cable TVor antenna signal.

T

If you have cable TVservice, you’ll simply connect the coaxial
cable lead-in from the cable TVcompany to your TV. If you intend
to connect a VHF/UHF antenna, you may need a 300- to 75-ohm
adapter, which is not supplied with your TV.
NOTE:You should be able to buy optional accessories such as a
VHF/UHF antenna or a 300- to 75-ohm adapter at most stores
that sell electronics. Or you can call our Customer Care Center
at 1-800-531-0039.

Connect the Cable TVorantenna signal to the
ANTENNAIN 75Ωjack on the rear of the TV.

1

NOTE: If you are using an antenna with a round coaxial
cable (75Ω), then you are ready to connect to the back of
the TV. If your antenna has a flat, twin-lead wire (300Ω),
you must first attach the antenna wires on a 300- to 75­ohm adapter. Then push the round end of the adapter onto
the ANTENNAIN 75Ωjack on the rear of the TV.

Insert the TV’s powerplug into the wall power outlet.

2

As an Energy Star®
Partner, Philips
Consumer Electronics
has determined this
product meets the
Energy Star®guidelines
for energy efficiency.
Energy Star®is a U.S.
registered mark. Using
products with the Energy
Star®label can save
energy. Saving energy
reduces air pollution and
lowers utility bills.

To avoid cabinet warping, cabinet color changes,
and increased chance of set failure, do not place

where temperatures can become excessively

the TV
hot—for example, in direct sunlight or near a
heating appliance.

A300- to 75-ohm twin-lead
adapteraccepts the antenna

cables (called twin-lead wires)
from an antenna, allowing you
to connect the antenna signal to
the TV.

Video and audio cables

with standard RCA
(phono) connectors con­nect the video and audio
jacks of accessory
devices such as VCRs
and DVD players to the
jacks on the TV.
To simplify making connections, the connectors
are usually color coded. The jacks on your TVare
likewise color coded to match the colors of the
connectors. The coding is as follows: yellow for
video (composite) and red and white for the right
and left audio channels, respectively. Use an audio
cable with a white connector when making mono,

Coaxial Cable
Lead-in from

Cable TV Company

Coaxial Cable

OR

300- to 75-ohm

Adapter

Twin-lead Wire

Coaxial Cable

Lead-in from Antenna

Rear-projection

Rear-projection

HDTV Monitor

HDTV Monitor

IMPORTANT

NOTE: This owner's manual is used with several
different television models. Not all features (and
drawings) discussed in this manual will necessar­ily match those found with yourtelevision set.
This is normal and does not require that you con­tact yourdealeror request service.
WARNING: TO PREVENTFIRE OR SHOCK
HAZARD DO NOTEXPOSE THIS UNITTO
RAIN OR EXCESSIVE MOISTURE.

Magnetic fields, such as those of external speak­ers, may cause the picture to distort if the speak­ers are placed too close to the television. Move
the magnetic field source away from the TVuntil
there is no picture distortion.

or nonstereo, connections. The connectors of
video cables used to connect component video or
RGB (high-resolution) jacks are often color coded
red, green, and blue. Component video connec­tions provide you with the highest possible color
and picture resolution.
An S-Video cableconnects devices such as DVD
players, VCRs, or camcorders to your TV. S-Video
provides better picture per­formance than regular (com­posite) video connections.
S-Video cables can be used
only with S-Video-compatible accessory devices.
You must also connect the left and right audio
cables along with S-Video because the S-Video
jack carries only the picture signal, not the sound.
ADB15 cablemakes an
RGB connection to the HD
INPUT-AV5 jack on the
rear of the TV.

Cable TV
Company

1

ANTENNA IN 75Ω

Rear of TV

INPUT-AV 1 OUTPUT

Y
VIDEO
S-VIDEO

Pb
L

AUDIO

Pr
R

Outdoor or Indoor Antenna
(Combination VHF/UHF)

The combination antenna receives normal
broadcast channels 2–13 (VHF) and 14–69 (UHF).

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

INPUT-AV 2

B/Pb
VIDEO
S-VIDEO

V

L

L

L

SYNC

AUDIO

AUDIO

AUDIO
H
R

R

R

3135 035 20751

5

FEATURES

Your new projection television and its packaging contain materials
that can be recycled and reused. Specialized companies can recy­cle your product to increase the amount of reusable materials and
minimize the amounts that need to be properly disposed. The bat­teries used by your product should not be thrown away when
depleted but should be handed in and disposed of as small chemi­cal waste. Please find out about the local regulations concerning
how to dispose of your old television, batteries, and packaging
materials whenever it is time to replace them.

End-of-life Disposal

Active Control™ continuously measures and corrects all incoming
signals to provide the best picture settings. This feature provides a
sharp and virtually noise-free picture any time, from any NTSC
source. NTSC is the

National Television Standards Committee for­mat devised in the 1940s for TV broadcast analog video signals
(525 lines: 30 Hz).
Alternate Channel (A/CH) button allows you to switch back and
forth between the currently viewed channel and the previously
viewed channel.
Automatic Phosphor Aging Compensation (APAC) works with
the set’s Automatic Format feature to prevent screen burn left by
nonmoving images. Periodically, APAC automatically shifts your
television picture in very small increments, but in increments large
enough to blur image retention. APAC is like a screen saver for
your TV.
Audio/video jacks allow direct connections with VCRs and other
accessories for quality TV picture and sound playback. Component
video input jacks are provided for high-fidelity color and picture
resolution when using digital video source material, such as a
DVD.
Audio Volume Leveler (AVL) control keeps the TV’s sound at an
even level. Peaks and valleys that occur during program changes
or commercial breaks are reduced, making for a more consistent,
comfortable sound.
AutoChron™ automatically sets the right time of day and main­tains it with digital precision through brownouts, power failures,
and even Daylight Savings Time adjustments.
AutoLock™ protects young children from objectionable program­ming with V-chip technology.
Automatic Format automatically detects the incoming signal’s
format and adjusts it to fill the screen. Also, your remote control
has a Format button that allows you to select the picture format
you want to see.
AutoPicture™ allows you to push a button and adapt your TV’s
picture to various types of programs, such as sports, movies, and
multimedia (games).
AutoSound™ allows you to select from three factory-set controls
and a personal control that you set according to your own prefer­ences through the onscreen Sound submenu. The three factory-set
controls—Voice, Music, and Theatre—enable you to tailor the TV
sound to enhance the particular programming you are watching.
AutoSurf™ allows you to easily switch among only the channels
that are of interest to you. You can program up to 10 channels into
the TV’s AutoSurf™ memory through the onscreen display.
Channel Edit allows you to add or remove channels from the list
of channels stored in the TV’s memory. Channel Edit makes it
easy to limit or expand the number of channels that are available
to you when you press the CH +/– buttons on your remote control.
Closed Captioning allows you to read TV program dialog or
voice conversations as onscreen text.

Virtual Dolby* Surround (referred to as DOLBY VIRTUAL in
the onscreen submenu) uses two speakers to simulate the sur-

round effect produced by a multichannel system.
Dynamic Contrast helps you sharpen the picture quality by mak­ing the contrast between the dark and bright picture areas more
noticeable as the image on screen changes.
Eye Fidelity gives you a choice between two different picture­scanning techniques—progressive and interlaced. Progressive scan
doubles the number of visible picture lines per field by displaying
all picture frame lines at once, eliminating line flicker. The inter­laced mode provides for a double vertical display (interlaced) of
progressive scan, which reduces annoying motion artifacts. The
Interlaced mode also helps smooth out jagged lines sometimes
seen on curved and angled surfaces.

High-definition component video inputs allow you to connect
High-definition signals to the TV (HD INPUT-AV 4 only). The
result is superb color purity, crisp color detail, and reduced color
noise. Your set provides separate HD inputs for YPbPr/RGB, as
well as horizontal and vertical sync.
Hi-fi stereo system, including a built-in audio amplifier and a twin
speaker system. The system enables you to hear stereo sound or
Second Audio Program (SAP) bilingual broadcasts when they are
available.
Home-cinema universal remote control operates your TV set and
other devices that work by infrared remote control, such as VCRs,
cable converter boxes, satellite receivers, and others. Note: You
may need to program the remote to work with devices other than
the TV. See pages 18–23.
Incredible Surround™ enhances stereo programs by making the
sound broader and fuller.
Onscreen menu shows the TV controls and allows you adjust or set
those controls (can be viewed in American English, French, or
Spanish).
Program List displays a list of your favorite channels at the press
of a button. You can scroll through the list, highlight a favorite
channel, and tune to the channel.
Protective screen filter helps prevent accidental damage to the del­icate front lenticular screen. Anyone with children or pets knows
accidents can happen in the home—especially when parents aren’t
watching. The protective screen filter is specifically formulated by
Philips for HD displays to protect your investment while giving the
best possible picture.
Sleep Timer automatically turns the TV off after a set amount of
time of your choice.
Standard broadcast (VHF/UHF) or cable TV (CATV) channel
capability, as well as advanced capability for high-definition video.
3-D Y/C Digital Comb Filter (activated when using the tuner and
composite inputs) processes the video with spatial and temporal fil­tering, virtually eliminating cross-color and cross-luminance inter­ference, improving video resolution. This filter uses extensive mem­ory to analyze complete video fields, significantly reducing “dot
crawl,” “hanging dots,” and “barber pole artifacts” on the image.
Two-tunerPicture-in-picture (PIP) allows you to monitor one
video source while watching another. Access your favorite shows
on the main screen with tuner one while scanning other channels in
the PIP window with tuner two. No VCR is needed for PIP tuning.

As an Energy Star® Partner, Philips Consumer Electronics has
determined this product meets the Energy Star® guidelines for
energy efficiency. Energy Star® is a U.S. registered mark. Using
products with the Energy Star® label can save energy. Saving

energy reduces air pollution and lowers utility bills.
Active Control, APAC, AutoPicture, AutoSound, AutoSurf, and Incredible
Surround are trademarks of Philips Consumer Electronics North America.
Copyright 2002 Philips Consumer Electronics.
*Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.

6

Connecting Accessory Devices to Your TV

Y

ou can connect a wide range of video and

audio devices to your TV, in various ways.
This page and the next one provide an overview
of signal compatibilities and the types of
devices you can connect to the jacks.
Connection examples follow on subsequent
pages. See pages 1 and 2 of the Quick Use and
Setup Guide that came with your set for exam­ples of basic connections. You may also want to
refer to the user instructions that came with
each particular device for information on con­nections.

What You Can Connect to the

Standard Panel Jacks

1

ANTENNA IN 75Ω jack—use to con­nect radio-frequency (RF) signals from
VHF/UHF antennas or a cable system.
These are 480i signals.

2

YPbPr (component video input [CVI]
jacks)—compatible with 480i signals

only. Use to connect accessories having
component video outputs, such as DVD
players, laser-disc players, video-game
players, satellite receivers, or other
devices. Use the INPUT-AV 1 L(eft) and
R(ight) AUDIO jacks for sound connec­tions. CVI cannot be displayed in the PIP
window.

3

S-VIDEO (super video) jacks—com­patible with 480i signals only. Use to
connect accessories having Super VHS
(S-VHS) outputs, such as VCRs, DVD
players, laser-disc players, video-game
players, satellite receivers, or other
devices.

4

VIDEO (composite) jacks (INPUT-AV

1,
INPUT-AV 2, and TV’s side jack panel
[AV3])—compatible with 480i signals

only. Use to connect accessories having
composite video outputs, such as VCRs,
video-game players, or other devices.

5

AUDIO inputs (INPUT-AV 1,
INPUT-AV 2, and TV’s side jack panel
[AV3])—use to connect from the audio

output jacks on VCRs, DVDs, or other
accessories.

6

OUTPUT (VIDEO/AUDIO)—video is
compatible with 480i signals only. Use to
connect to a VCR to record programs
from the TV. Or use the AUDIO outputs
to connect to an audio hi-fi system.

7

n Headphone jack—use to connect
headphones for personal listening.

• Signals connected to the HD INPUT-AV 4
or HD INPUT-AV 5 inputs will provide
you with the best picture. Examples of
sources for such signals are a progressive­scan DVD player (480p) or an HD receiver
(1080i or 480p) with YPbPr or RGB out­puts. The 1080i signals will provide you
with the best picture possible. Devices with
RGB outputs may or may not have H and
V sync outputs to connect to the HD
INPUT-AV 4 H and VSYNC inputs (see
page 57). Instructions for selecting the
HD INPUT-AV 4 and AV 5 color space
(YPbPr or RGB) are on page 59.

• Among the 480i-compatible inputs
(ANTENNA IN 75Ω, INPUT AV-1,
INPUT AV-2, and the side jack panel), you
will get the best picture from the compo­nent video inputs (labeled YPbPr). The
S-Video inputs will provide the next-best
level of picture quality.

HELPFUL HINTS

PANEL OVERVIEWS

:STANDARD INPUTS AND OUTPUTS

The side jack-panel inputs (recognized by the
TV as AV3) are convenient for connecting a
camcorder. See page 16.

cc

C

HECK IT OUT

Summary of signal compatibilities

Input jacks on TV

Compatible output signal

from an external source

or device

ANTENNA IN 75Ω, INPUT AV-1,

INPUT AV-2, and side jack panel (AV3)

480i (480 lines, interlaced)

ANTENNA IN 75Ω

1

Rear of TV

6

4

INPUT-AV 1

VIDEO

S-VIDEO

L

AUDIO

R

3

5

OUTPUT

Y

Pb

Pr

2

4

INPUT-AV 2

VIDEO

S-VIDEO

L

AUDIO

R

3

5

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

L

SYNC

AUDIO

H

R

AUDIO

L

R

Side Jack Panel

3

4

G

5

7

NOTE: The
TV recognizes
the side jack
panel as AV3.

7

Connecting Accessory Devices to Your TV

PANEL OVERVIEWS

:HIGH-DEFINITION INPUTS

T

he HD INPUT-AV 4 and HD INPUT-AV 5
jacks allow you to digital equipment with

1080i or 480p signal output.

What You Can Connect to the

High-definition Input Jacks

1

HD INPUT-AV 4—use to connect digi­tal equipment with a 1080i or a 480p
signal output, such as HD receivers
(1080i or 480p) or DVD players with
progressive-scan capability (480p). You
can connect equipment with YPbPr
component video or RGB outputs to the
HD INPUT-AV 4 jacks. H and VSync
connections may or may not be required
for RGB connections. (See

page 57.)
Dedicated audio input jacks are located
with the HD INPUT-AV 4 video jacks.

NOTE: The Picture-in-Picture (PIP) feature
does not function with AV 4.

2

HD INPUT-AV 5—use to connect digital
equipment with a 1080i or a 480p signal
output, such as HD receivers (1080i or
480p) or DVD players (480p). The
HD INPUT-AV 5 jack accepts a DB15
connector. Dedicated audio input jacks
are located with the HD INPUT-AV 5
video jack.

NOTE: The Picture-in-Picture (PIP) feature
does not function with AV5.

Summary of signal compatibilities

Input jacks on TV

Compatible output signal

from an external source

or device

HD INPUT-AV 4 and HD INPUT-AV 5

1080i (1080 lines, interlaced) or
480p (480 lines, progressive scan)

• The TV’s default color-space setting for
HD INPUT-AV 4 is YPbPr, and for
HD INPUT-AV 5 it is RGB. If the picture
looks grossly incorrect, try changing the
color-space setting on either the digital
equipment or the TV. For more informa­tion on setting the color space on the dig­ital equipment, see the equipment’s direc­tions-for-use manual. To set the TV’s
color space, see page 59 in this manual.

• This television is designed to be compatible
with high-definition signal standards 1080i
and 480p as specified by the Electronic
Industries Association standard EIA770.3.
Because output standards may vary by man­ufacturer, you may encounter some digital
equipment that will not properly display pic­tures on the TV.

• The Picture-in-Picture (PIP) feature does
not function with the HD INPUT-AV 4 or
HD INPUT-AV 5 signal sources. AV4 and
AV5 cannot be displayed in the PIP win­dow, nor can the PIP window be dis­played when either AV4 or AV5 is being
viewed on the main screen.

HELPFUL HINTS

ANTENNA IN 75Ω

Rear of TV

INPUT-AV 1

VIDEO

S-VIDEO

L

AUDIO

R

OUTPUT

Y

Pb

Pr

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

AUDIO

VIDEO

L

R

INPUT-AV 2

S-VIDEO

SYNC

R/Pr

B/Pb

V

L

AUDIO

H

R

1

L

AUDIO

R

2

8

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/ HOME HOME PERSONAL

SLEEP

REC •

VCR

ACC

MENU/
SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

5

AV1

a

T

he TV’s audio/video (AV) input jacks provide

for direct picture and sound connections
between the TV and accessory devices such as
VCRs, DVD players, and others that have AV out­put jacks.

This example, which uses the INPUT-AV 1 jacks,
shows you one way you can connect a VCR to
your TV.

Refer to the directions-for-use manual for your
VCR for further information on connections.

To make the connections shown in this example,
you will need:

• one coaxial cable (75Ω)

• one cable for a video connection (standard

RCA connector)

• two cables for audio connections (standard

RCA connectors) (only one cable is needed for
a nonstereo VCR).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039

1

Connect a cable TV or antenna signal to
the ANT IN jack on the rear of the VCR.

2

Connect from the OUT jack on the rear
of the VCR to the

ANTENNA IN 75Ω

jack on the rear of the TV.

3

Connect the VIDEO OUT jack on the
rear of the VCR to the INPUT AV1
VIDEO jack on the rear of the TV.

4

Connect the audio output R(ight) and
L(eft) jacks on the rear of the VCR to the

INPUT-AV 1 AUDIO jacks on the rear of
the TV.

NOTE: If the VCR is a mono (nonstereo)
unit, connect only the left audio cable,
which usually has a white connector.

5

Press the AV button on the remote con­trol as many times as necessary to select

the AV1 source.

6

Turn the VCR on and press PLAY to
view a videotape on the TV.

Connecting Accessory Devices to Your TV

CONNECTING A VCR

BEGIN

To simplify making connections, audio and
video cables often have color-code connec­tors. The jacks on your TV are likewise
color coded to match the connectors. The
coding is as follows:

• Yellow for video (composite)

• Red for the right audio channel

• White for the left audio channel

NOTE: If your VCR is mono (non­stereo), you will connect only one audio
cable. You must ensure that the TV is set
to MONO for the signal source to which
you’ve connected the VCR (

INPUT-AV

1,
INPUT-AV2, or the side panel inputs
[AV3]). Otherwise, you will receive
sound from only one of the TV’s speakers.
See page 36.

HELPFUL

HINT

Y ou can display the A V1, AV2, or A V3 signal
sources in the PIP window. See page 7 of the
Quick Use and Setup Guide for information on
using the Picture-in-Picture (PIP) feature.

cc

C

HECK IT OUT

ANTENNA IN 75Ω

2

3

INPUT-AV 1

VIDEO

S-VIDEO

L

AUDIO

R

Rear of VCR*

* (Example: Philips VCR
model VR674CAT)

Rear of TV

OUTPUT

4

Y

Pb

Pr

AUDIO

VIDEO

L

R

INPUT-AV 2

S-VIDEO

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

SYNC

AUDIO

H

L

L

Coaxial Cable

AUDIO

R

Lead-in from

R

Cable TV Company

or VHF/UHF Antenn

1

AUDIO

L

ANT

IN

IN

OUT

R

VIDEO

OUT

CH3 CH4

IN

OUT

9

CONNECTING A VCR

AND CABLE BOX

P

resented here is a connection example

involving a VCR and cable box.

Refer to the VCR’s directions-for-use manual
for further information on connections.

To make the connections in this example, you
will need:

• one, two-way signal splitter

• two coaxial cables (75Ω)

• one cable for a video connection (standard
RCA connector)

• two cables for audio connections (standard
RCA connectors) (only one cable is needed
for connection to a nonstereo VCR).

NOTE: The cables are not supplied with your
TV. You should be able to buy them at most
stores that sell electronics. Or you can call
our Customer Care Center at
1-800-531-0039.

1

Connect a cable TV signal to a two­way signal splitter.

2

Connect one of the two-way signal
splitter outputs to the INPUT on the

cable box.

3

Connect the other two-way signal
splitter output to the ANTENNA IN

75Ω on the rear of the TV.

4

Connect from the cable box OUTPUT
jack to the ANT IN jack on the rear of

the VCR.

5

Connect the VIDEO OUT jack on
the VCR to the INPUT-AV 1 VIDEO

jack on the rear of the TV.

6

Connect the AUDIO OUT R(ight)
and L(eft) jacks on the VCR to

INPUT-AV 1 AUDIO jacks on the rear
of the TV.

NOTE: If the VCR is a nonstereo unit,
connect only the left audio cable,
which usually has a white connector.

7

Press the AV button on the remote
control as many times as necessary

to select the AV1 source.

8

Turn the VCR on and push PLAY to
view a videotape.

Connecting Accessory Devices to Your TV

BEGIN

To simplify making connections, the connectors
on audio and video cables are often color
coded. The jacks on your TV are likewise color
coded to match the connectors.
The coding is as follows:

• Yellow for video (composite)

• Red for the right audio channel

• White for the left audio channel

NOTE: If your VCR is mono (nonstereo),
you will connect only one audio cable. You
must ensure that the TV is set to MONO for
the signal source to which you’ve connected
the VCR (INPUT-AV 1, INPUT-AV 2, or the
side panel inputs [AV3]). Otherwise, you will
receive sound from only one of the TV’s
speakers. See page 36.

HELPFUL HINT

Rear of VCR*

* (Example: Philips

VCR model
VR674CAT)

AV1

ANTENNA IN 75Ω

3

Rear of TV

5

INPUT-AV 1

OUTPUT

6

AUDIO

Y

Pb

L

R

Pr

AUDIO

Two-way

Signal

Splitter

S-VIDEO

VIDEO

1

HD INPUT-AV 4

INPUT-AV 2

VIDEO

S-VIDEO

L

R

Coaxial Cable Lead-in from

Cable TV Company

or VHF/UHF Antenna

HD INPUT-AV 5

G/Y

R/Pr

B/Pb

V

SYNC

AUDIO

H

L

L

AUDIO

R

R

4

AUDIO

L

ANT

IN

IN

OUT

R

VIDEO

OUT

CH3 CH4

IN

OUT

Rear of Cable Box

OUTPUT

INPUT

2

7

TV

VCR

SWAP PIP CH

DN

UP

SOUND

STATUS/

EXIT

VOL

MUTE

213
546
879

TV/VCR

A/CH

0

SURF

REC •

FORMAT

SAP

ITR/ HOME HOME PERSONAL

ACTIVE

CONTROL

PIP ON/OFF

SLEEP

POWER

ACC

FREEZE

PICTURE

MENU/
SELECT

CH

SURF

PROG.LISTDOLBY VAV

10

CONNECTING AND U

SING AN AUDIO HI-FI SYSTEM WITH YOUR TV

Y

ou can use your TV’s AUDIO OUTPUT jacks

to connect to an external audio hi-fi system.

Follow the simple steps below.
To make these connections, you will need two

cables for audio connections (standard RCA).
NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the L(eft) and R(ight)
AUDIO OUTPUT jacks on the rear of the

TV to the L(eft) and R(ight) AUX/TV
INPUT jacks on the rear of the hi-fi system.

2

See the section below on using the
AUDIO OUT control.

A

fter connecting the TV’s AUDIO OUTPUT

jacks to the AUDIO INPUT jacks on an
external hi-fi system, set the AUDIO OUT
control in the SOUND submenu to either
VARIABLE or FIXED to determine whether
you adjust the volume at the TV or at the
external hi-fi system. To change the volume at
the TV using the TV’s remote control, you must
select VARIABLE. To adjust the volume at the
stereo using the hi-fi’s controls, you must select
FIXED. You can also use the SPEAKERS
control in the SOUND submenu to turn the
TV’s speakers off.

1

Press the MENU/SELECT button

on the remote control to show the
onscreen menu.

2

Press the CURSOR RING DOWN

once to highlight SOUND.

3

Press the CURSOR RING RIGHT

to enter the SOUND submenu.

4

Press the CURSOR RING DOWN

repeatedly until AUDIO OUT is high­lighted.

5

Press the CURSOR RING LEFT or
RIGHT to set the AUDIO OUT to

either VARIABLE or FIXED.

6

If you want to turn the TV’s internal
speakers off, press the CURSOR
RING DOWN repeatedly until

SPEAKERS is highlighted. Then press
the CURSOR RING LEFT or RIGHT
to turn the speakers off.

7

Press the STATUS/EXIT button to
exit the menu.

Connecting Accessory Devices to Your TV

BEGIN

BEGIN

The sound outputs from the TV to an exter­nal hi-fi system are not affected or tailored
by the TREBLE, BASS, BALANCE, AVL,
INCR. SURROUND, and BASS BOOST
controls in the TV’s SOUND submenu.

HELPFUL HINT

ANTENNA IN 75Ω

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

SYNC

H

L

L

AUDIO

AUDIO

R

R

S-VIDEO

Rear of TV

OUTPUT

INPUT-AV 2

VIDEO

S-VIDEO

L

AUDIO

R

INPUT-AV 1

Y

VIDEO

Pb

L

AUDIO

Pr

R

1

AUX/TV INPUT

L

PICTURE

SOUND

FEATURES
INSTALL

R

PHONO INPUT

TREBLE
BASS
BALANCE
AVL
INCR . SURROUND

POWER

Rear

of Hi-fi

SOUND

TREBLE 30

BASS
BALANCE
AVL
INCR . SURROUND

SOUND

5

7

2,4,

6

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

TV

VCR

ACTIVE

CONTROL

DN

UP

MUTE

213
546
879
0

POSITION

PIP

ACC

FREEZE

PICTURE

SURF

SELECT

INCR . SURROUND
HEADPHONE
STEREO
SAP

AUDIO OUT FIXED

3

OR

MENU/

CH

1

AUDIO OUT VARIABLE

SOUND

HEADPHONE
STEREO
SAP
AUDIO OUT

SPEAKERS OFF

OR

SPEAKERS ON

11

CONNECTING A STANDARD DVD PLAYER

C

omponent video inputs allow the highest pos-

sible color and picture resolution in the play­back of digital signals, such as those of DVD
players. The color difference signals (Pb, Pr) and
the luminance (Y) signal are connected and
received separately. The result is better color
bandwidth information than is possible with com­posite video (labeled VIDEO on your TV’s jack
panel) or S-Video connections.

To make the connections shown in this example,
you will need:

• three cables for video connections (standard

RCA connectors)

• two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect the YPbPr (component)
VIDEO OUT jacks from the DVD player

to the INPUT-AV 1 YPbPr (component
video) jacks on the rear of the TV.

NOTE: The INPUT -AV 1 YPbPr jacks
will accept 480i (interlaced) output sig­nals only.The connection example on this

page assumes the use of a DVD player
with interlaced output. Some DVD play­ers, however, have YPbPr outputs that can
be switched between interlaced and pro­gressive scan. If you are attempting to use
a DVD player with progressive-scan
(480p output) capability to make the con­nection shown in this example, you must
be sure to switch the DVD player to inter­laced. If necessary, refer to the DVD play­er’s directions-for-use manual for help. If
you want to use the DVD player in pro­gressive-scan mode, you must use the
HD INPUT-AV 4 jacks (see page 12).

2

Connect the AUDIOOUT L(eft) and
R(ight) jacks from the DVD player to the

INPUT-AV 1 AUDIO jacks on the rear of
the TV.

3

Press the AV button on the remote con­trol as many times as necessary to select

the CVI (component video input) source
on the TV.

4

Turn the DVD player on and press
PLAY to view the DVD program on
the TV.

Connecting Accessory Devices to Your TV

• T o simplify making connections, the connec­tors on audio and video cables are often color
coded. The jacks on your TV are likewise
color coded to match the connectors.

• The names for the component video jacks
may differ depending on the DVD player or
accessory digital source equipment used. For
example, besides YPbPr, you may see
R-Y/B-Y/Y; or CrCbY. Although abbrevia­tions and terms may vary, the letters Band R
stand for the blue and red color component
signal connectors, respectively, and Yindicates
the luminance signal. If necessary, refer to the
directions-for-use manual for your DVD or
digital accessory for more information.

• You can also connect a satellite receiver to the
TV in a manner similar to the example shown
on this page. If you connect a satellite receiver
to the TV, you will need to use the receiver’s
channel-memorization system to store chan­nels in the receiver’s memory.

• If you experience difficulties receiving sound
with a DVD disc, check the sound settings
through the DVD disc’s menu.

• The CVI source cannot be displayed in the
PIP window. See page 7 in the Quick Use and
Setup Guide for more on the PIP feature.

HELPFUL HINTS

To prevent uneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 60.

WARNING

BEGIN

ANTENNA IN 75Ω

2

S-VIDEO

Rear of DVD Player*

PCM-MPEG2-Dolby Digital-DTS

COAXIAL

*(Example: Philips DVD model DVD712)

CVI

POWER

ACC

VCR

ACTIVE

CONTROL

FREEZE

UP

PICTURE

MENU/

SELECT

MUTE

CH

213
546
879

SURF

0

PIP ON/OFF

SLEEP

FORMAT

PROG.LISTDOLBY VAV

HOME

HOME

PERSONAL

VIDEO

MOVIES

PIPPOSITION

3

TV

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

ITR/

RECORD

DN

SURF

REC •

SAP

INPUT-AV 1

VIDEO

L

AUDIO

R

DIGITAL AUDIO OUT

OPT OUT

Rear of TV

OUTPUT

Y

Pb

Pr

SUB WF OUT

1

VIDEO

L

AUDIO

R

INPUT-AV 2

S-VIDEO

1

2

R

AUDIO OUT

L

(CVBS)

VIDEO OUT

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

L

SYNC

AUDIO

H

1

2

PR/C

R

VIDEO OUT

L

AUDIO

R

R

Y

B/CB

P

(Y/C)

S-VIDEO OUT

T

he following instructions explain how to

connect a DVD player with progressive-scan
capability to the HD INPUT-AV 4 jacks on
your TV.

To make the connections, you will need:

• three cables for video connections (standard

RCA connectors)

• two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the YPrPb jacks on
the

rear of the DVD player to the

HD INPUT-

AV 4 G/Y, R/Pr, B/Pb jacks

on the rear of the TV.

2

Connect from the L(eft) and R(ight)
AUDIO OUT jacks on the rear of the

DVD player to the HD INPUT-AV 4
AUDIO L(eft) and R(ight) jacks on the rear
of the TV

.

3

Make sure the DVD player is in pro­gressive-scan mode. You will not get a
viewable picture through the HD
INPUT-AV 4 jacks if the DVD player is
in interlaced mode.

For more information on placing your
DVD player in progressive-scan mode,
see the DVD player’s directions-for-use
manual. Also, see the Helpful Hints to
the right. The way in which progres­sive-scan mode is selected varies among
DVD players.

4

Press the AV button on your TV remote
control as many times as necessary to

select the

AV4 signal source.

5

Turn the DVD on, insert a disc, and
press play to view a DVD on the TV.

If you experience difficulties receiving
sound with a DVD disc, check the sound
settings through the DVD disc’s menu.

HELPFUL HINT

To prevent uneven picture-tube aging, do not
leave nonmoving images or picture borders on
the screen for an extended period. See page 60.

W

ARNING

12

CONNECTING A DVD P

LAYER WITH PROGRESSIVE-SCAN CAPABILITY

Connecting Accessory Devices to Your TV

BEGIN

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/

RECORD

HOME
VIDEO

HOME

MOVIES

PERSONAL

SLEEP

REC •

PIPPOSITION

VCR

ACC

MENU/
SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

4

AV4

• If after connecting your DVD player your
display is filled with wavy lines, it may be
that your DVD player is not set to progres­sive-scan mode. Some DVD players have an
I/P (interlaced/progressive scan) switch
located on the back or front of the players for
changing from interlaced to progressive-scan
mode. Other DVD players may allow the
mode to be changed by pressing a button on
the DVD player’s remote control or by using
the DVD player’s onscreen menu. If the

interlaced/progressive-scan selection
option is provided only through the DVD
onscreen menu, you will need to connect
the DVD player to another AV input
source in addition to HD INPUT-AV 4 to
see the DVD menu. Select this additional
AV source on screen to see the DVD menu
and choose progressive-scan mode. You
will then be able to see the DVD picture
through the AV4 source.

• Some DVD players have dedicated progres­sive-scan output jacks that are labeled as
such and require no switching to provide a
picture through the HD INPUT-AV 4 jacks.
See your DVD player’s directions-for-use
manual for information.

• The default color-space setting for the
HD INPUT-AV 4 jacks is YPbPr. RGB is
also an option. If the picture’s color looks
grossly incorrect, try changing either the
DVD player’s or TV’s color-space setting.
See the DVD player’s directions-for-use
manual for information on setting its color
space. Or see page 59 in this manual to set
the TV’s color space.

• The Picture-in-Picture (PIP) feature does
not function with AV4 or AV5.

HELPFUL HINTS

ANTENNA IN 75Ω

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

SYNC

H

AUDIO

1

2

L

L

AUDIO

R

R

AC IN ~

INPUT-AV 1

VIDEO

S-VIDEO

L

AUDIO

R

VIDEO OUT

3

Rear of DVD Player with Progressive Scan Capability

Y

VIDEO

B

P

PR

SELECT

I

S

P

Rear of TV

OUTPUT

Y

Pb

Pr

AUDIO

VIDEO

L

R

2CH

INPUT-AV 2

S-VIDEO

AUDIO OUT

L

R

BITSTREAM

/PCM

OPTICAL

COAXIAL

DIGITAL

13

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/

RECORD

HOME
VIDEO

HOME

MOVIES

PERSONAL

SLEEP

REC •

VCR

ACC

MENU/
SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

3

AV2

T

he S(uper)-Video connection on the rear (and

side panel) of the TV can give you better pic­ture detail and clarity for the playback of S-VHS
VCR tapes or DVDs than the normal antenna
(RF signal) or Video (composite) picture connec­tions. The example given connects a DVD/VCR
Combi unit to the INPUT-AV 2 jacks on the rear
of the TV.

NOTE: The accessory device must have an
S-VIDEO output jack to make the connection
explained on this page.

To make the connections, you will need:

• one S-Video cable

• two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect the S-VIDEO OUT jack on the
rear of the accessory device with
S-VIDEO output to the INPUT-AV 2
S-VIDEO jack on the rear of the TV.

2

Connect the DVD/VCR AUDIO OUT
jacks on the rear of the accessory device

to the INPUT-AV 2 AUDIO input jacks on
the rear of the TV.

3

Press the AV button on the remote con­trol as many times as necessary to select

the AV2 source on the TV.

4

Turn the accessory device on and press
play to view the video source material
(DVD or videotape, for example) on
the TV.

Connecting Accessory Devices to Your TV

CONNECTING AN S-V

IDEO DEVICE

BEGIN

• To simplify making connections, audio
cables are often color coded: red for the
right channel, and white for the left chan­nel. The jacks on your TV are likewise
color coded to match the connectors. To
make S-Video connections, you must use
an S-Video cable.

• You can also connect a satellite receiver,
laser-disc player, video-game player, or
other accessory device with S-Video
capability to the TV in a manner similar
to example shown on this page.

• If you connect a satellite receiver to the
TV, you will need to use the receiver’s
channel-memorization system to store
channels in the receiver’s memory.

HELPFUL HINTS

Video sources that show a constant nonmov­ing pattern on the TV screen can cause pic­ture-tube damage. When you are not using
your video accessory devices, turn them off.
Also, regularly alternate the use of accessory
video sources with normal TV viewing. See
page 60.

WARNING

ANTENNA IN 75Ω

Rear of TV

INPUT-AV 1

OUTPUT

AUDIO

Y

Pb

L

Pr

R

VIDEO

S-VIDEO

Rear of Device with
S-VIDEO Output*

DVD/VCR

OUT

CH3 CH4

L
AUDIO
R

VIDEO

IN

DVD/VCR

AUDIO OUT

L

R

ANT-IN

ANT-OUT

*(Example: Philips DVD/VCR Combi model DV910VHS)

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

1

SYNC

R/Pr

B/Pb

V

AUDIO

H

L

R

DIGITALAUDIO OUT
PCM / BITSTREAM

S-VIDEO

OUT

AUDIO

OPTICAL

L

R

COMPONENT

VIDEO OUT

Y

COAXIAL

Cr

Cb

2

INPUT-AV 2

VIDEO

S-VIDEO

L

AUDIO

R

CONNECTING AN HD R

ECEIVER TO THE HD INPUT-AV 4 JACKS

Connecting Accessory Devices to Your TV

• Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv­er’s onscreen menu and a picture (valid signal) from the receiver should
it be switched to SD mode.

• The HD INPUT-AV 4 jacks are for standard RCAconnectors. Your HD
receiver may use RCA or BNC output jacks. If your HD receiver comes
with BNC jacks, you will need to purchase BNC-to-RCA adapters to
connect the receiver to the TV. You should be able to purchase these
adapters at most stores that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

• The HD INPUT-AV 4 jacks are compatible with some digital equipment
having RGB outputs with “sync on green” or RGB with “separate H and V
sync.” Output standards for digital equipment, however, may vary by manu­facturer. No industry standards have been established for HD television RGB
signal systems, timing, synchronization, and signal strengths. If the digital
equipment you want to connect to your TV offers both component video and
RGB outputs, component video is the suggested connection to use.

• The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr.
RGB is also an option. If the picture color looks grossly incorrect, try
changing either the receiver’s or TV’s color space. See the receiver’s
directions-for-use manual for information on setting its color space. Or
see page 59 in this manual for setting the TV’s AV4 color space.

• AV4 and AV5 do not function with the PIP feature. They cannot be dis­played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.

HELPFUL HINTS

BNC-to-

RCA

Adapter

BNC

Connector

Adapter

Fitted to

Connection

OR

RCA

Connector

D

igital equipment with a 1080i or 480p out­put, is compatible with the HD INPUT-AV 4

video jacks.
NOTE: This television is designed to be compati-

ble with high-definition signal standards 1080i
and 480p as specified by the Electronic Industries
Association standard EIA770.3. Because output
standards may vary by manufacturer, you may
encounter some digital equipment that will not
properly display pictures on the TV.

To make the connections shown in this example,
you will need:

• one S-VIDEO cable

• three cables for video connections (standard
RCA connectors)

• four cables for audio connections (standard
RCA connectors)

• one coaxial cable (75Ω).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect S-VIDEO and audio cables.
NOTE: This example uses

INPUT-AV 1. You can use INPUT-AV 2 or
the side input jacks if you want.

• Connect an S-VIDEO cable from the HD
receiver’s S-VIDEO jack to the TV’s
INPUT-AV 1 S-VIDEO jack.

• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s
INPUT-AV 1 L(eft) and R(ight) AUDIO
jacks.

2

Connect component video and audio
cables to the TV’s HD inputs.

• Connect from the YPRPB jacks on
the HD receiver to the TV’s HD
INPUT-AV 4 G/Y, R/Pr, B/Pb jacks.

• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s HD
INPUT-AV 4 L(eft) and R(ight) AUDIO
jacks.

3

Connect coaxial cables.

• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF antenna to the IN FROM
ANT jack on the HD receiver.

• Connect a coaxial cable from the OUT
TO TV jack to the ANTENNA IN 75Ω
jack on the TV.

• Connect the coaxial cable lead-in from a
satellite dish antenna to the SATELLITE
IN jack on the HD receiver.

4

Refer to the directions-for-use manual
that came with the HD receiver for setup
instructions.

BEGIN

14

ANTENNA IN 75Ω

3

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

B/Pb

V

SYNC

H

3

2

2

L

L

AUDIO

AUDIO

R

R

3

1

Rear of HD Receiver
(Example: Philips DSHD800)

Rear of TV

INPUT-AV 1

Y

VIDEO

S-VIDEO

AUDIO

Y

L

PB

RF

PR

REMOTEPHONE JACK

AUDIO

VIDEOVIDEO

Pb

L

AUDIO

Pr

R

L

VCR

CONTROL

RR

S-VIDEO

INPUT-AV 2

OUTPUT

VIDEO

1

S-VIDEO

L

AUDIO

R

DIGITAL

AUDIO OUT

Coaxial Cable Lead-in

from Cable Outlet,

Cable Converter Box,

or VHF/UHF Antenna

OUT TO TV

CH 3
CH 4

IN FROM ANT SATELLITEIN

Coaxial Cable

Lead-in

from

Satellite

Dish Antenna

D

igital equipment with a 1080i or 480p
output

, is compatible with the HD INPUT­AV 5 video input jack. This page presents one
possible connection scenario. See the HD
receiver’s directions-for-use manual for more
information.

To make the connections shown in this example,
you will need:

• one DB15 cable

• an S-VIDEO cable

• four cables for audio connections (standard

RCA connectors)

• one coaxial cable (75Ω).
NOTE: The cables are not supplied with your TV.

You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect S-VIDEO and audio cables.
NOTE: This example uses

INPUT-AV 1. You can use INPUT-AV 2 or
the side input jacks if you would like.

• Connect an S-VIDEO cable from the HD
receiver’s S-VIDEO jack to the TV’s
INPUT-AV 1 S-VIDEO jack.

• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s
INPUT-AV 1 L(eft) and R(ight) AUDIO
jacks.

2

Connect the DB15 video cable and audio
cables to the TV’s HD inputs.

• Connect from the DB15 jack on the
receiver to the TV’s HD INPUT-AV 5
DB15 jack.

• Connect from the HD receiver’s AUDIO
L(eft) and R(ight) jacks to the TV’s
HD INPUT-AV 5 L(eft) and R(ight)
AUDIO jacks.

3

Connect coaxial cables.

• Connect the coaxial cable lead-in from
your cable outlet, cable converter box, or
VHF/UHF antenna to the receiver’s
ANTENNAAIN jack. If desired, con­nect the coaxial cable lead-in from anoth­er RF signal source to the receiver’s
ANTENNA B IN jack.

• Connect a coaxial cable from the OUT
TO TV jack to the ANTENNA IN 75Ω
jack on the TV.

• Connect the coaxial cable lead-in from a
satellite dish antenna to the SATELLITE
IN jack on the receiver.

4

Refer to the directions-for-use manual
that came with the HD receiver for setup
instructions.

15

CONNECTING AN

HD RECEIVER TO THE HD INPUT-AV 5 JACKS

Connecting Accessory Devices to Your TV

• This television is designed to accept high-definition signal standards
1080i and 480p as specified by the Electronic Industries Association
standard EIA770.3. Because output standards may vary by manufactuer,
you may encounter some digital equipment that will not properly dis­play pictures on the TV.

• Making a standard connection along with the HD connection as shown
in the example (S-VIDEO) on this page will allow you to see the receiv­er’s onscreen menu and a picture (valid signal) from the receiver should
it be switched to standard-definition mode.

• You can also connect a 1080i or 480p video source that has component
video, RGB, or RGB+H/V output jacks rather than a DB15 output jack
to the TV’s HD INPUT-AV5. This type of hookup will require a special­ty cable that has a DB15 connector on one end and standard (phono­type) RCA connectors on the other. See page 57 for more information
on HD INPUT-AV5 input compatibility. After making the connections,
also ensure that the TV’s color-space setting matches the output of your
video source, either RGB or YPbPr (see page 59).

• The default color-space setting for the HD INPUT-AV 5 jack is RGB.
YPbPr is also an option. If the picture color looks grossly incorrect, try
changing either the receiver’s or TV’s color space. See the receiver’s
directions-for-use manual for information on setting its color space. See
page 59 in this manual for information on selecting a color-space setting
for the AV5 input.

• AV4 and AV5 do not function with the PIP feature. They cannot be dis­played in the PIP window, nor can the PIP window be displayed when
those signal sources are being viewed on the main screen.

HELPFUL HINTS

BEGIN

Rear of HD Receiver

Coaxial Cable

Lead-in from
Satellite Dish

ANTENNA IN 75Ω

SATELLITE

IN

S-VIDEO

ACCESS CARD

3

Rear of TV

INPUT-AV 1

OUTPUT

Y

1

VIDEO

AUDIO

Pb

L

Pr

R

1

DIGITAL AUDIO

OUTPUT

INPUT-AV 2

VIDEO

S-VIDEO

L

AUDIO

R

R

R

VCR

CONTROL

PHONE JACK

Coaxial Cable Lead-in

from Alternate RF

Signal Source

HD INPUT-AV 5

HD INPUT-AV 4

G/Y

R/Pr

2

B/Pb

V

L

SYNC

AUDIO

H

R

L

L

VIDEOAUDIO

OUT TO TV

2

L

AUDIO

R

S-VIDEO

ANTENNA BINANTENNA A

33

3

IN

Coaxial Cable

Lead-in from Cable Outlet,

Converter Box,

or VHF/UHF Antenna

16

CONNECTING A C

AMCORDER

T

he side panel jacks provide a convenient way

for you to connect a camcorder to your TV.
The side panel jacks are recognized by your TV
as AV3.

You can obtain S-VIDEO quality with an S-VHS,
Hi-8, or digital camcorder by connecting to the
S-VIDEO input instead of the VIDEO (composite)
input.

To make the connections shown in this example,
you will need:

• an S-VIDEO cable

• two cables for audio connections (standard

RCA connectors).

NOTE: The cables are not supplied with your TV.
You should be able to buy them at most stores
that sell electronics. Or you can call our
Customer Care Center at 1-800-531-0039.

1

Connect from the S-VIDEO output on
the camcorder to the S-VIDEO input in
the TV’s side panel.

2

Connect from the AUDIO outputs on
the camcorder to the side panel AUDIO

L(eft) and R(ight) inputs.

3

Press the AV button on the remote con­trol as many times as necessary to select
the AV3 source on the TV.

4

Turn the camcorder on, insert a video­tape and press PLAY to view the tape
on the TV.

Connecting Accessory Devices to Your TV

BEGIN

PIP ON/OFF

213
546
879
0

TV

SWAP PIP CH

DN

UP

ACTIVE

CONTROL

FREEZE

SOUND

MUTE

SURF

A/CH

POWER

PICTURE

STATUS/

EXIT

SURF

ITR/

RECORD

HOME
VIDEO

HOME

MOVIES

PERSONAL

SLEEP

REC •

PIPPOSITION

VCR

ACC

MENU/

SELECT

VOL

CH

TV/VCR

FORMAT

SAP

PROG.LISTDOLBY VAV

3

AV3

To simplify making connections, the con­nectors on audio cables are often color
coded: red for the right channel, and white
for the left channel. The jacks on your TV
are likewise color coded to match the con­nectors. To make S-Video connections, you
must use an S-Video cable.

HELPFUL HINT

Typical

Camcorder




S-VIDEO

DV

1

VIDEO AUDIO

Side Jack Panel

LEFT RIGHT

S-VIDEO

VIDEO

L

AUDIO

R

G

2

17

CONNECTING AND U

SING HEADPHONES WITH YOUR TV

T

he HEADPHONE controls allow you to
adjust the volume and balance of the

sound going to the headphones.

1

Press the MENU/SELECT button

on the remote control to show the
onscreen menu.

2

Press the CURSOR RING DOWN

once to highlight SOUND.

3

Press the CURSOR RING RIGHT

to enter the SOUND submenu.

4

Press the CURSOR RING DOWN

repeatedly until HEADPHONE is
highlighted. Then press the CURSOR
RING RIGHT to enter the
HEADPHONE submenu.

5

Press the CURSOR RING DOWN
or UPto highlight VOLUME or

BALANCE. Then press the CURSOR
RING LEFT or RIGHT to adjust the
control.

6

Press the STATUS/EXIT button to
exit the menu.

T

he TV’s side panel has a headphone jack for

personal listening.

1

Insert the headphone plug into the head­phone jack ; in the TV’s side panel.

2

Turn down the TV’s volume or press
the Mute button

cc

on the remote con-

trol to turn off the TV’s internal speakers.

See the section below for information on
adjusting headphone volume and balance.

NOTE: The headphone impedance must
be between 8 and 4,000 ohms. The head­phone jack is stereo and 3.5 mm in size.

Connecting Accessory Devices to Your TV

The AVL, INCR. SURROUND, and BASS
BOOST controls do not function with the
headphones.

HELPFUL HINT

BEGIN

BEGIN

Side Jack Panel

G

1

PICTURE

MENU/
SELECT

2

MUTE

CH

SOUND

TREBLE 30

BASS
BALANCE
AVL
INCR . SURROUND

PICTURE

SOUND

FEATURES
INSTALL

2

TREBLE
BASS
BALANCE
AVL
INCR . SURROUND

STATUS/

EXIT

VOL

SOUND

6

2,4,

5

TV

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

POWER

ACC

VCR

ACTIVE

FREEZE

CONTROL

DN

UP

PICTURE

MENU/

SELECT

MUTE

213
546
879

SURF

0

POSITION

PIP

CH

3

1

SOUND

TREBLE
BASS
BALANCE
INCR . SURROUND

HEADPHONE

SOUND

HEADPHONE

VOLUME 30

BALANCE

SOUND

HEADPHONE

VOLUME

BALANCE 0

VOLUME
BALANCE

18

PROGRAMMING THE

TV REMOTE TO WORK ACCESSORY DEVICES

Y

our TV remote is capable of working not

only your TV but also other infrared
remote (IR) controlled devices such as VCRs,
cable TV converter boxes, satellite receivers,
DVD players, and laser-disc players.

If you want to use your TV remote to oper­ate a VCR or other accessory device, you
will need to perform this initial check
explained in this section. You may also need
to go to the sections on the “Code-entry
Method” and the “Search Method” in the
pages that follow.

1

Press the VCR orACC(essory)
mode button on the TV remote for

the desired accessory device category.
NOTE: Pressing the VCR mode button

allows access to product codes for
VCRs. Pressing the ACC(essory) mode
button allows access to the product
codes for cable TV converters, satellite
receivers, DVD players, and laser-disc
players.

2

Point the TV remote toward the
desired accessory device and press
the POWER button.

Does the remote turn the accessory
device on?

If yes, and try other function but-

tons on the TV remote. With a VCR,
for example, try the Play, Stop, and
Rewind buttons, for example. (See
page 23 for information on how the
remote buttons correspond with acces­sory device functions.) If they also
work the accessory device, then the
remote is ready and no further steps
are needed.

If not, do the following:
Look up a four-digit remote code

number on pages 21 or 22 for your

brand of accessory device. Then go
through the simple steps for entering a
four-digit code as explained on
page 19.

BEGIN

Using the Remote Control

If more than one four-digit code number is
listed, you may have to try more than the
first number given to locate your device’s
correct code.

HELPFUL HINT

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

Satellite Receiver

Cable Converter Box

DVD Player

VCR

1

TV

VCR

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

ACTIVE

CONTROL

DN

UP

MUTE

213
546
879
0

POWER

ACC

SURF

FREEZE

PICTURE

MENU/

SELECT

2

1

CH

POSITION

PIP

19

USING THE CODE-ENTRY METHOD TO PROGRAM YOUR TV REMOTE

N

ow that you have looked up the four-

digit remote-control Direct-entry Code
for your brand of accessory device, you are
ready to follow the simple steps shown below
to program your TV remote.

Please read through all the steps before
beginning.

1

First, press and hold down the VCR
or ACC (for an accessory device
other than a VCR) mode button on

the TV remote. Then press and hold
down the MENU/SELECT button at
the same time for a brief moment.
Release the buttons. The TV remote
back light will switch on.
NOTE: For correct operation, you
must first press and hold the mode
button and then press and hold the
MENU/SELECT button simultaneously.

2

Within 30 seconds of pressing the
VCR (or ACC) button and
MENU/SELECT button, enter a
four-digit code for the accessory
device (see pages 21 and 22).

If you make a mistake while attempt­ing to enter the four-digit code and
want to start again, press any button
other than one with a number. Then
return to step 1 to begin again.

3

Point the remote at the accessory
device. Then press the POWER button

on the remote to turn the device on.

BEGIN

Using the Remote Control

• If you do not enter a complete code within
30 seconds, you will need to perform step
1 of the Code-entry Method again.

• If you enter more than four digits, the unit
will retain the first four digits entered.

• If the procedure explained above does not

work the first time, repeat the steps using
the same remote code number.

• If after a second try the remote does not

operate your accessory device, and more
code numbers are listed for your brand,
use the next listed code number.

• If after repeated attempts the Entry-code

Method does not allow you to work your
accessory device with your TV remote, try
the Search Method explained on the next
page.

HELPFUL HINTS

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

Satellite Receiver

Cable Converter Box

DVD Player

VCR

1

TV

VCR

SWAP PIP CH

SOUND

STATUS/

EXIT

ACTIVE

CONTROL

DN

UP

POWER

ACC

FREEZE

PICTURE

SELECT

3

1

MENU/

2

VOL

MUTE

213
546
879

TV/VCR

A/CH

0

POSITION

CH

SURF

PIP

20

USING THE S

EARCH METHOD TO PROGRAM YOUR TV REMOTE

Y

our TV remote can be set to work various

accessory devices (VCRs, cable convert­ers, and satellite receivers, for example) by
what is called the Search Method.

NOTE: The Search Method works only with
devices equipped with channel-display indi­cators on the devices themselves or the abili­ty to show channel numbers on the TV
screen. If the Code-entry Method (shown in
the previous section) did not enable your TV
remote to work your accessory device, then
follow the easy steps listed below. Please
read the steps once before performing them.

1

Turn on the desired device. Press
and hold down the VCR orACC
(for an accessory device other than
a VCR) mode button on the TV

remote. Then press and hold down the
SURF button as you hold down the
desired mode (VCR or ACC) button.

NOTE: For correct operation, you
must press and hold down the desired
mode (VCR or ACC) button first and
then press and hold down the SURF
button second.

While holding down the SURF and
the desired mode (VCR orACC)
buttons simultaneously, point the
remote toward the accessory device

and continue holding the buttons
down.

2

Watch the Channel Indicator on
your accessory device. Channel num-

bers will scan up when the TV remote
has identified the correct code for
your accessory device. This may take
several minutes.

3

Release the mode (VCR or ACC)
and SURF buttons as soon as chan­nel numbers start to scan up. The

scanning means that your TV remote
has found the code for your accessory
device.

NOTE:

If no channel change happens

after several minutes, repeat steps 1 and

2. Then if a channel change still does not
occur, the remote will not work with the
desired accessory device.

BEGIN

Using the Remote Control

• The remote’s back light will blink
as the remote moves through its
product code list. After the remote
identifies the product code for
your accessory device and you
release the remote buttons, the
back light will blink twice.

• Your TV remote may locate the
accessory device’s code quickly or
within several minutes.

• Don’t let the accessory device
scan up more than five channels
when the correct code is found—
the remote may pass up the right
code and have to repeat the search
cycle.

HELPFUL HINTS

POWER

ACC

TV

VCR

ACTIVE

SWAP PIP CH

FREEZE

CONTROL

DN

UP

PICTURE

SOUND

Satellite Receiver

Cable Converter Box

06

07

08

1,3

TV

SWAP PIP CH

SOUND

STATUS/

EXIT

VOL

TV/VCR

A/CH

06

09

VCR

06

POWER

ACC

VCR

ACTIVE

FREEZE

CONTROL

DN

UP

PICTURE

MENU/
SELECT

MUTE

213
546
879

SURF

0

POSITION

PIP

07

07

CH

08

09

08

09

1,3

1,3

21

DIRECT-ENTRY

CODES FOR A/V ACCESSORY DEVICES

S

EE THE NEXT PAGE FOR MORE CODES.

Using the Remote Control

VCR

CODE NUMBER

DENON . . . . . . . . . . . . . . . .0859

GE . . . . . . . . . . . . . . . . . . .0862

H

ARMAN/KARDON . . . . . . . .0871

H

ITACHI . . . . . . . . . . . . . . . .0870

JVC . . . . . . . . . . . . . . . . . .0868

KENWOOD . . . . . . . . . . . . .0865

MAGNAVOX . . . . . . . . . . . . .0860

MARANTZ . . . . . . . . . . . . . .0866

MITSUBISHI . . . . . . . . . . . . . .0861

ONKYO . . . . . . . . . . . . . . . .0860

O

PTIMUS . . . . . . . . . . . . . . .0869

P

ANASONIC . . . . . . . . . . . . .0859

PHILIPS . . . . . . . . . . . . . . . . .0866, 0860

PIONEER . . . . . . . . . . . . . . .0869, 0863

PROSCAN . . . . . . . . . . . . . . .0862

RCA . . . . . . . . . . . . . . . . . .0862, 0869

SAMSUNG . . . . . . . . . . . . . . .0870

SONY . . . . . . . . . . . . . . . . .0864

T

ECHNICS . . . . . . . . . . . . . .0859

T

HETA DIGITAL . . . . . . . . . . .0869

TOSHIBA . . . . . . . . . . . . . . .0860

YAMAHA . . . . . . . . . . . . . . .0859, 0867

ZENITH . . . . . . . . . . . . . . . .0872, 0860

DVD PLAYER

CODE NUMBER

ADMIRAL . . . . . . . . . . . . . . .0075, 0236

ADVENTURA . . . . . . . . . . . . .0027

AIKO . . . . . . . . . . . . . . . . . .0305

AIWA . . . . . . . . . . . . . . . . .0334, 0495, 0027, 0064

AKAI . . . . . . . . . . . . . . . . . .0133, 0080, 0068, 0076,

. . . . . . . . . . . . . . . . . . . . .0088, 0183, 0269

AMERICA A

CTION . . . . . . . . .0305

A

MERICAN HIGH . . . . . . . . . .0062

ASHA . . . . . . . . . . . . . . . . .0267

AUDIOVOX

. . . . . . . . . . . . . .0064

B

EAUMARK . . . . . . . . . . . . . .0267

BELL & HOWELL . . . . . . . . . .0131

BROKSONIC . . . . . . . . . . . . .0148, 0211, 0029, 0236,

. . . . . . . . . . . . . . . . . . . . .0238, 0322, 0388, 0506

CCE . . . . . . . . . . . . . . . . . .0099, 0305

CALIX . . . . . . . . . . . . . . . . .0064

CANON . . . . . . . . . . . . . . . .0194, 0062, 0129

CAPEHART . . . . . . . . . . . . . .0047

CARVER . . . . . . . . . . . . . . . .0108

CINERAL . . . . . . . . . . . . . . .0305

CITIZEN . . . . . . . . . . . . . . . .0305, 0064

COLT . . . . . . . . . . . . . . . . .0099

CRAIG . . . . . . . . . . . . . . . . .0064, 0099, 0074, 0267,

. . . . . . . . . . . . . . . . . . . . .0298

CURTIS MATHES . . . . . . . . . .0062, 0068, 0087, 0189

CYBERNEX . . . . . . . . . . . . . .0078, 0267

DAEWOO . . . . . . . . . . . . . . .0305, 0588, 0047, 0072

DAYTRON . . . . . . . . . . . . . .0047

DENON . . . . . . . . . . . . . . . .0069

DYNATECH . . . . . . . . . . . . . .0027

ELECTROHOME . . . . . . . . . . .0064

ELECTROPHONIC . . . . . . . . . .0064

EMEREX . . . . . . . . . . . . . . . .0059

EMERSON . . . . . . . . . . . . . . .0211, 0029, 0236, 0305,

. . . . . . . . . . . . . . . . . . . . .0063, 0148, 0238, 0588,

. . . . . . . . . . . . . . . . . . . . .0235, 0321, 0506, 0088,

. . . . . . . . . . . . . . . . . . . . .0115, 0239, 0027, 0064,

. . . . . . . . . . . . . . . . . . . . .0070, 0095, 0322, 0388,

. . . . . . . . . . . . . . . . . . . . .0537

FISHER . . . . . . . . . . . . . . . . .0074, 0131, 0081, 0093

FUJI . . . . . . . . . . . . . . . . . . .0060, 0062

FUNAI . . . . . . . . . . . . . . . . .0027

GE . . . . . . . . . . . . . . . . . . .0062, 0087, 0075, 0092,

. . . . . . . . . . . . . . . . . . . . .0229, 0267

GARRARD . . . . . . . . . . . . . .0027

GO VIDEO . . . . . . . . . . . . . .0306, 0459, 0553, 0259

GOLDSTAR . . . . . . . . . . . . . .0064, 0045, 0065, 0498,

. . . . . . . . . . . . . . . . . . . . .0507

GRADIENTE . . . . . . . . . . . . .0035, 0027, 0435

GRUNDIG . . . . . . . . . . . . . . .0222

HI-Q . . . . . . . . . . . . . . . . .0074

H

ARLEY DAVIDSON . . . . . . . .0027

H

ARMAN/KARDON . . . . . . . .0065, 0102, 0108

H

ARWOOD . . . . . . . . . . . . .0095, 0099

HEADQUARTER . . . . . . . . . . .0073

H

ITACHI . . . . . . . . . . . . . . . .0069, 0193, 0132, 0092,

. . . . . . . . . . . . . . . . . . . . .0027, 0068, 0109

H

UGHES NETWORK SYSTEMS .0069

JVC . . . . . . . . . . . . . . . . . .0094, 0035, 0233, 0234,

. . . . . . . . . . . . . . . . . . . . .0068, 0411

JENSEN . . . . . . . . . . . . . . . . .0068

KEC . . . . . . . . . . . . . . . . . .0064, 0305

KLH . . . . . . . . . . . . . . . . . .0099

KENWOOD . . . . . . . . . . . . .0068, 0094, 0411, 0065

KODAK . . . . . . . . . . . . . . . .0062, 0064

LXI . . . . . . . . . . . . . . . . . . .0064

LLOYD'S . . . . . . . . . . . . . . . .0027, 0235

LOGIK . . . . . . . . . . . . . . . . .0099

MEI . . . . . . . . . . . . . . . . . .0062

MGA . . . . . . . . . . . . . . . . .0070, 0088, 0267

MGN TECHNOLOGY . . . . . . .0267

MTC . . . . . . . . . . . . . . . . .0027, 0267

MAGNASONIC . . . . . . . . . . . .0305

MAGNAVOX

. . . . . . . . . . . . .0062, 0108, 0137, 0130,

. . . . . . . . . . . . . . . . . . . . .0027, 0066, 0176

M

AGNIN . . . . . . . . . . . . . . .0267

MARANTZ . . . . . . . . . . . . . .0108, 0062

MARTA . . . . . . . . . . . . . . . . .0064

MATSUSHITA . . . . . . . . . . . . .0062, 0189, 0481

MEMOREX . . . . . . . . . . . . . .0131, 0074, 0506, 0027,

. . . . . . . . . . . . . . . . . . . . .0064, 0075, 0062, 0073,

. . . . . . . . . . . . . . . . . . . . .0267, 0334, 0066, 0189,

. . . . . . . . . . . . . . . . . . . . .0236, 0481, 0828, 0829

MINOLTA

. . . . . . . . . . . . . . .0132, 0069

M

ITSUBISHI . . . . . . . . . . . . . .0200, 0088, 0102, 0241,

. . . . . . . . . . . . . . . . . . . . .0269, 0070, 0075, 0094,

. . . . . . . . . . . . . . . . . . . . .0470

MOTORO LA . . . . . . . . . . . . .0062, 0075

MULTITECH . . . . . . . . . . . . .0027, 0099

NAD . . . . . . . . . . . . . . . . .0085

NEC . . . . . . . . . . . . . . . . . .0065, 0067, 0068, 0077,

. . . . . . . . . . . . . . . . . . . . .0094, 0109, 0131

NIKKO . . . . . . . . . . . . . . . . .0064

NIKON . . . . . . . . . . . . . . . .0061, 0280

NOBLEX . . . . . . . . . . . . . . .0267

OLYMPUS . . . . . . . . . . . . . . .0062, 0253

OPTIMUS . . . . . . . . . . . . . . .0189, 0481, 0827, 0828,

. . . . . . . . . . . . . . . . . . . . .0075, 0085, 0829, 0064,

. . . . . . . . . . . . . . . . . . . . .0131, 0459

OPTONICA . . . . . . . . . . . . . .0089

ORION . . . . . . . . . . . . . . . .0506, 0029, 0211, 0236,

. . . . . . . . . . . . . . . . . . . . .0322

PANASONIC . . . . . . . . . . . . .0062, 0189, 0828, 0481,

. . . . . . . . . . . . . . . . . . . . .0253, 0104, 0405, 0829,

. . . . . . . . . . . . . . . . . . . . .0129, 0252, 0254, 0273,

. . . . . . . . . . . . . . . . . . . . .0827

PENNEY . . . . . . . . . . . . . . . .0062, 0267, 0064, 0069,

. . . . . . . . . . . . . . . . . . . . .0065, 0067, 0081

PENTAX . . . . . . . . . . . . . . . .0069, 0092, 0132

PHILCO . . . . . . . . . . . . . . . .0062, 0236, 0506

PHILIPS . . . . . . . . . . . . . . . . .0108, 0062, 0089, 0137,

. . . . . . . . . . . . . . . . . . . . .0830, 0831

P

ILOT . . . . . . . . . . . . . . . . .0064

P

IONEER . . . . . . . . . . . . . . .0085, 0195, 0094

P

OLK AUDIO . . . . . . . . . . . .0108

PORTLAND . . . . . . . . . . . . . .0047

P

ROFITRONIC . . . . . . . . . . . .0267

P

ROSCAN . . . . . . . . . . . . . . .0087, 0229

PROTEC . . . . . . . . . . . . . . . .0099

P

ULSAR . . . . . . . . . . . . . . . .0066, 0078

Q

UARTER . . . . . . . . . . . . . . .0073

QUARTZ . . . . . . . . . . . . . . .0073

QUASAR . . . . . . . . . . . . . . .0062, 0189, 0104, 0481,

. . . . . . . . . . . . . . . . . . . . .0828

RCA . . . . . . . . . . . . . . . . . .0087, 0176, 0229, 0069,

. . . . . . . . . . . . . . . . . . . . .0132, 0085, 0062, 0075,

. . . . . . . . . . . . . . . . . . . . .0092, 0104, 0133, 0267,

. . . . . . . . . . . . . . . . . . . . .0304

RADIO SHACK

. . . . . . . . . . .0027

R

ADIX . . . . . . . . . . . . . . . . .0064

RANDEX . . . . . . . . . . . . . . .0064

REALISTIC . . . . . . . . . . . . . . .0027, 0131, 0074, 0075,

. . . . . . . . . . . . . . . . . . . . .0064, 0062, 0089, 0073,

. . . . . . . . . . . . . . . . . . . . .0093

RICOH . . . . . . . . . . . . . . . . .0061, 0280

RUNCO . . . . . . . . . . . . . . . .0066

STS . . . . . . . . . . . . . . . . . .0069

SALORA . . . . . . . . . . . . . . . .0102

SAMSUNG . . . . . . . . . . . . . . .0072, 0078, 0080, 0267

SANKY . . . . . . . . . . . . . . . . .0066, 0075

SANSUI . . . . . . . . . . . . . . . .0068, 0506, 0027, 0094,

. . . . . . . . . . . . . . . . . . . . .0109, 0236, 0298

SANYO . . . . . . . . . . . . . . . . .0074, 0073, 0131, 0267

SCOTT . . . . . . . . . . . . . . . . .0211, 0238, 0148, 0070,

. . . . . . . . . . . . . . . . . . . . .0072, 0237, 0239

SEARS . . . . . . . . . . . . . . . . .0081, 0132, 0064, 0069,

. . . . . . . . . . . . . . . . . . . . .0027, 0062, 0073, 0074,

. . . . . . . . . . . . . . . . . . . . .0093, 0131

SEMP . . . . . . . . . . . . . . . . . .0072

SHARP . . . . . . . . . . . . . . . . .0075, 0089

SHINTOM . . . . . . . . . . . . . . .0099

SHOGUN . . . . . . . . . . . . . . .0078, 0267

SINGER . . . . . . . . . . . . . . . .0099

SONY . . . . . . . . . . . . . . . . .0060, 0061, 0059, 0280,

. . . . . . . . . . . . . . . . . . . . .0027, 0038, 0062

SUNPAK . . . . . . . . . . . . . . . .0280

SYLVANIA . . . . . . . . . . . . . . .0062, 0108, 0027, 0070,

. . . . . . . . . . . . . . . . . . . . .0130, 0137

SYMPHONIC . . . . . . . . . . . . .0027

TMK . . . . . . . . . . . . . . . . .0063, 0235, 0267

TATUNG . . . . . . . . . . . . . . . .0068

TEAC . . . . . . . . . . . . . . . . . .0027, 0068

TECHNICS . . . . . . . . . . . . . .0062, 0189, 0273

TEKNIKA . . . . . . . . . . . . . . .0027, 0062, 0064, 0079

THOMAS . . . . . . . . . . . . . . .0027

TOSHIBA . . . . . . . . . . . . . . .0072, 0237, 0239, 0070,

. . . . . . . . . . . . . . . . . . . . .0093, 0393

TOTEVISION . . . . . . . . . . . . .0064, 0267

UNITECH . . . . . . . . . . . . . . .0267

VECTOR . . . . . . . . . . . . . . . .0072

VECTOR RESEARCH . . . . . . . .0065, 0067

VIDEO CONCEPTS . . . . . . . . .0067, 0072, 0088, 0248

VIDEOSONIC . . . . . . . . . . . . .0267

W

ARDS . . . . . . . . . . . . . . . .0062, 0087, 0089, 0027,

. . . . . . . . . . . . . . . . . . . . .0074, 0239, 0267, 0069,

. . . . . . . . . . . . . . . . . . . . .0075, 0099, 0108, 0176

W

HITE WESTINGHOUSE . . . . .0099, 0305, 0236

XR-1000 . . . . . . . . . . . . . .0099, 0027, 0062

YAMAHA . . . . . . . . . . . . . . .0065

ZENITH . . . . . . . . . . . . . . . .0066, 0027, 0060, 0061,

. . . . . . . . . . . . . . . . . . . . .0236, 0506

TV

VCR

ACTIVE

SWAP PIP CH

CONTROL

DN

UP

SOUND

POWER

ACC

FREEZE

PICTURE