Philips 52PFL7403D/F7, 52PFL7403D/27, 52PFL5603D/F7, 52PFL5603D/27, 52PFL3603D/F7 Hook Up Guide

Register your product and get support at

Addendum for the use of VESA wall mounts

ENGLISH

There are many styles and manufacturers of VESA wall mounts. The type of wall mount you choose will determine whether spacers are required, and
what length bolts are required for secure mounting. Ensure that there is enough of a gap between the wall and the back of the TV set, so that the
cables (power cord, audio cables, and video cables) are not pinched, stressed, or strained. If the wall mount you choose has a slim profile and places
the TV very close to the wall, you may need to purchase spacers to ensure sufficient gap between the TV and the wall.

The bolt length should be 15mm. If you use a spacer, the bolt length should be spacer length plus 15mm. For example, if you determine you need to
use a 40mm spacer to have enough gap for the cables, the bolt length you should use would be 55mm (40mm + 15mm).

Wall mount the TV

WARNING: Wall mounting of the TV should only be performed by qualifi ed installers. Koninklijke Philips Electronics N.V. B

bears no responsibility for improper mounting that results in accident or injury.

Step 1 Purchase a VESA-compatible wall bracket

Depending on the size of your TV screen, purchase a wall bracket, bolts and, optionally, spacers.

TV screen size
(inches)

32 Adjustable 300 x 300 4 of M6x10mm steel bolt

42 or larger Fixed 400 x 400 4 of M8x15mm steel bolt

VESA-compatible wall bracket
(millimeters)

Bolt and spacer type (not supplied) Special instructions

or

4 of M6x50mm steel bolt with 40mm
spacer

or

4 of M8x55mm steel bolt with 40mm
spacer

Note: You can purchase a VESA-compatible wall bracket from D www.shopping.philips.com/wallmounts.

Step 2 Remove the TV stand

Note: Stand may differ according to TV model. These instructions are only applicable to TV models with installed stands. If your TV stand is not D
installed, skip to Step 3 Connect cables.

Adjust bracket to 200 x 300 before securing to
the TV.

None

12NC 3139 125 40422

Carefully place the TV face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to protect your screen.1.

Using a cross-head (Phillips) screwdriver (not supplied), unscrew the four screws that secure the stand to the TV.2.

Firmly pull the stand from the bottom of the TV, being careful because the stand is heavy. Place both the stand and screws in a secure location for 3.
future reinstallation.

Step 3 Connect cables

Connect the antenna or cable, the power cord and all other devices to the back of the TV as described in the following sections and in Connect your
devices on page 32 .

Step 4 Secure the VESA-compliant wall bracket to the TV

WARNING: Only use the specifi ed bolts (M6 for 32 inch models, M8 for all other models) to secure the VESA-compliant wall B

bracket to your TV. The specifi ed bolts are designed to match the weight of your TV.

Note: Depending on your VESA-compliant wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. D
Refer to your VESA-compliant wall bracket documentation for instructions.