Philips 32PFL6704D, 32PFL7704D, 42PFL5603D, 42PFL6704D, 42PFL7704D User Manual

...

Regist:e__you__p_oduct and get st_ppo_t at

www_p _ilipSocolira/weIco lirae

52PFL7704D 47PFL7704D

42PFL7704D 32PFL7704D 52PFL6704D 47PFL6704D 42PFL6704D

32PFL6704D

EN User manual

For further assistance, call the customer support service in your country

" To obtain assistance in the US.A,, Puerto Rico, or the US.Virgin islands, contact Philips

Customer Care Center at 1 866 771 4018

" To obtain assistance in Canada, contact Philips Customer Care Center at:

" 1 800 661 6162 (French spealdn£) " 1 866 771 4018 (English speaking)

Enter bdow the model and serial nurnbers Ioca±ed on the back and right side oftheTV cabinet,

Model: Serial:

Contents

1 Notice 4

9 Connect devices

Connection overview Select your connection quality

Label your connections Connect your devices

28 28 29 29 3O

2 Important

Product information

Screen care

Environmental care

3 Your TV

Side controls and indicators Remote control

Get started Position the Tg

Insert the remote control batteries

Connect the antenna or cane Connect the power cord

Manage cables

Switch on and set up theTV

Use your TV Switch yourTV on/off or to standby

Switch channels Adjust volume

Watch channels from a set-top box Watch connected devices

Watch a DVD

1I 1I 1I 1I 12 12 12

5 5 5 5

6 6

10 Troubleshooting

11 Notes for the use of USB devices

12 Product information

13 Warranty

14 Index

8 8 8 9 9

Use more of yourTV Use the quid< access menu

Change picture and sound settings Use Auto Mode

Create and use lists of favorite channels Set the dod<

Use child control and rating locks View closed captions (subtitles) View photos, play music, and watch videos on a USB device

Watch videos on a USB device

Use yourTV in HD mode

Use yourTV as a PC monitor

Use Philips EasyLink

Use the demo mode

Install channels

Select your menu language

Set your location to home

Automatically install channels

Optimize the signal quality from your antenna

Uninstall and reinstall channels

Return your settings to default values

Show emergency alerts (EAS)

Update your TV software

Check your current software version

Prepare for the software upgrade

Upgrade software

13 13 13 15 15 15 16 19

20 22 22

25 25 25 25 25

EN 1

Registering your model with PHlUPS makes you eligible for all of the valuable benefits listed below, so don't miss out.

Complete and return your Product Registration Card at once, or register online at www.philips.comlwelcome to ensure:

Know these

PHILIPS

Congratulations on your purchase, and welcome to the "family!"

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You've selected one of the best-built, best-backed products available today.We'll do every-

thing in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS "family," you're entitled to protection by one of the most comprehensive warranties and outstanding

service networks in the industry.What's more, your purchase guar- antees you'll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

Host importantly, you can count on our uncompromising commit- ment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in a PHILIPS product.

safetysymbols

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REHOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This "bolt of lightning" indicates unin-

sulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The "exclamation point" calls atten- tion to features for which you should

read the enclosed literature closely to pre- vent operating and maintenance problems.

WARNING: To reduce the risk of fire or electric shock, this apparatus should not be

exposed to rain or moisture and objects filled with liquids, such as vases, should not

be placed on this apparatus. CAUTION: To prevent electric shod<,

match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour 6viter les choc 61ec- triques, introduire la lame la plus large de la

fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

2 EN

P.S. To get the most from your PHILIPS purchase, be

sure to complete and return your Product Registration

Card at once, or register online at:

ww_.philips.com/welcome

For Customer Use

Enter below the model and serial numbers located on the back and right side of the TV cabinet. Retain

this information for future reference.

Model No. Serial No.

iMPORTANT SAFETY iNSTRUCTiONS

Read before operating equipment

#ii:ili_i!!!!!!!!!!!!!!!!!!!!iiiiii

:::ii_!!!!!!!!!!!!!!!!!i!!iiiiil

I. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide

blade or third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus combination

to avoid injury from tO-over.

13. Unplug this apparatus during lightning storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. This product may contain lead or mercury. Disposal of these materials

may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the

Electronic Industries Alhance:www.eiae.org.

16. Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance; or

C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended international global safety standards for tilt and stability properties of its

cabinets design.

• Do not compromise these design standards by applying excessive pull

force to the front, or top, of the cabinet which could ultimately overturn the product.

• Also,do not endanger yourself, or children, by placing electronic equipment/toys on the top of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product damage

and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

19. Power Lines - An outdoor antenna should be located away from power lines.

20. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to provide

some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mats and supporting structure grounding of the lead-in wire to an antenna-

discharge unit, size of grounding connectors, location of antenna- discharge unit, connection to grounding electrodes and requirements for

the grounding electrode. See Figure below.

21. Objects and Liquid Entry - Care should be taken so that obiects do not fall and liquids are not spilled into the enclosure through openings.

a) Warning: To reduce the risk of fire or electric shock, this apparatus

should not be exposed to rain or moisture and objects filled with liquids, such as vases should not be placed on this apparatus.

22. Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - alignment as marked on the

unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.)

• Remove batteries when the unit is not used for a long time.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 81 0-21)

GROUND CLAMPS

ELECTRICSERVICEEQUIPMENT

POWER SERVICEGROUNDING ELECTRODE SYSTEM

(NEC ART 2S0, PARTFI)

Note to the CATV system installer." this reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

EN 3

1 Notice

2009 © Koninldijke Philips Electronics N.V.AII rights reserved. Specifications are subject to change without notice.Trademarks are

the property of Koninldijke Philips Electronics N.V. or their respective

owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are

used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Philips warrants that the

material itself does not infringe any United States patents. No further warranty is expressed or implied.

Philips cannot be held responsible neither for any errors in the content

of this document nor for any problems as a result of the content in this

document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.

Pixel characteristics This LCD product has a high number of color pixeis.AIthough it has

effective pixels of 99.999% or more, black dots or bright points of light

(red, green or blue) may appear constantly on the screen.This is a

structural property of the display (within common industry standards)

and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips

Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this manual, any adjustments, or

assembly procedures not recommended or authorized in this manual

shall void the warranty.

Cables Connections to this device must be made with shielded cables with

metallic RFI/EMI connector hoods to maintain compliance with FCC

Rules and Regulations.

Canadian notice This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

DOLBY

DIGITAL J

Manufactured under license from Dolby Laboratories."Dolby" and the

double-D symbol are trademarks of Dolby Laboratories.

Federal Communications Commission Notice This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiven

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

Modifications

The FCC requires the user to be notified that any changes or

modifications made to this device that are not expressly approved by Philips Consumer Electronics may void the user's authority to operate

the equipment.

VESA, FDll and theVESA Mounting Compliant logo are trademarks of theVideo Electronics Standards Association.

® Kensin_on and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in

other countries throughout the world.

DivX® isa registered trademark of DivX, Inc., and is used under license.

freetype.org).

4 EN

2 Important

Registering your model with Phifips makes you eligible for all of the

valuable benefits listed below, so don't miss out.

Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure:

• Proof of Purchase Returning the enclosed card guarantees that your date of

purchase is on file, so no additional paperwork is required from

you to obtain warranty service.

• Product Safety Notification By registering your product you receive notification - directly

from the manufacturer - in the rare case of a product recall or

safety defect.

• Additional Benefits of Product Ownership

Registering your product guarantees that you receive all of the privileges

to which you're entitled, including special money-saving offers.

Environmental care

The packaging of this product is intended to be recycled. Contact your

local authorities for information about how to recycle the packaging, End of life directives

ij3iiiiiiii!!!iiii

iliili{;i:i:i_122222211@i!

:::ii_!!!!!!!!!!!!!!!!!{i!!iiiiil

_####################/_

For further assistance

For further assistance, call the customer support service in your country.

• To obtain assistance inthe U.S.A., Puerto Rico, or the U.S. Virgin Islands, contact Philips Customer Care Center at 1-866-771-

40I 8

• To obtain assistance in Canada, contact Philfps Customer Care Center at:

• 1-800-661-6162 (French speaking)

• 1-866-771-4018 (English speaking)

Product information

ThisTY consumes minimal energy in standby mode to minimize environmental impact.The active power consumption is given on the type plate at the back oftheTV.The model and serial number of your TV can be found on the bad< and right side oftheTV as well as on the

packaging,

Screen care

• Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

• Unplug the TV before cleaning.

• Clean the TV screen and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners

on the TV screen.

• Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object.

• To avoid deformations and color fading, wipe off water drops as soon as possible.

Like all LCD products, this set contains a lamp with mercury; please dispose of according to all local, state and federal laws. Philfps pays a lot of attention to produce environment-friendly products in green focal areas.Your newTV contains materials which can be recycled and reused. At the end of its life, specialized companies can

dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you

dispose of your oldTV according to local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and

cadmium. Nevertheless, in many areas, batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.

EN 5

3 YourTV Remote control

Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at

www, philips,com/wefcome,

Side controls and indicators

VOLUME

Q-

AUTO

ACTIVE

SOU_ OPTIONS

@ @

(_) Standby indicator / remote control sensor (location may vary)

(_ POWER: Switches the TV on or off. The TV is not powered off

completely unless it is physically unplugged.

CHANNEL +/-: Switches to the next or previous channel.

(_) MENU: Toggles the main menu on or off.

VOLUME +/-: Increases or decreases volume.

® ®

BACK l

EXF

_ @

NFO

..J

--@ @

--@ ®

6 EN

PHILlPS

TELEVISION

(_) (5 (Standby-On)

Switches the TV on or off. The TV is not powered off completely

unless it is physically unplugged,

(_) FAV

Displays a list of all channels marked as favorite,

(_) TV

Switches back to the antenna source from EasyLink mode.

@ Color buttons

Selects tasks or options.

(_ SOURCE

Selects connected devices.

(_ OPTIONS

Activates the quick access menu (see 'Use the quick access menu' on page 13).

(_) OK

Activates a selection or accesses the menu.

(_ AT_ (Navigation buttons)

Navigates through the menus.

(_) INFO

Displays information about the TV channel or accessory device.

The quality and accuracy of the information depends on the

broadcaster. You might see a difference in broadcast time if the broadcast is from a different time zone.

(_ _ (Fast Forward)

Searches forward on your EasyLink device.

(_ O (Record)

Starts or stops video recording on your EasyLink device.

(_ MUTE

Nutes or restores audio output.

(_ CH+/-

Switches to the next or previous channel.

(_ FORMAT

Selects a picture format.

(_ Number buttons

Select a channel, page or setting.

1_ . (Dot)

Press the dot (.) for digital channels.

(_ PREV CH

Returns to the previously viewed channel.

(_ VOL +/-

Increases or decreases volume,

(_ ACTIVE CONTROL

The TV continuously measures and corrects incoming signals to

provide the best picture quality.

iliili{;i:i:i_122222211@i!

:::ii_!!!!!!!!!!!!!!!!!{i!!iiiiil

_####################:_

[]

Stops playback on your EasyLink device.

(@ "

Searches backward on your EasyLink device.

Starts, pauses or resumes playback on your EasyLink device. MENU/EXIT

Turns the menu on or off.

(_ BACK

Returns to a previous screen.

1_ AUTO MODE

Cycles through the preset picture and sound settings (see 'Use Auto Node' on page 15).

(_) DEMO

Toggles the demo menu on or off.

(_ SLEEP

Sets a delay after which the TV switches to standby.

EN 7

4 Get started Insert the remote control batteries

This section supplements information in the Quick Start. For

information about how to mount and install yourT_, refer to the Quick Start.

Position the TV

Warning

" Do not insert the power plug into the wall socket before all the connections are

made,

" Large screen TVs are hea£y. Two people are required to carry and handle a large

screen TV.

• Before you move the TV, disconnect the cables to prevent breakage.

In addition to reading and understanding the safety instructions, consider the following before positioning yourTV;

• Ensure that you always have easy access to the power cord or plug to disconnect the TV from the power.

• If the TV is mounted on a swivel base, ensure that no strain is placed on the power cord when the TV is swiveled. Strain on the

power cord can loosen connections.

• The ideal viewing distance for watching TV is three times its

screen SiZe.

• Position the TV where light does not fall on the screen,

• Connect your devices before you position the TV.

1 Slide the battery cover off the back of the remote control.

2 Insert the 2_supplied batteries (AAA). Be sure the + and - ends

of the batteries line up with the markings inside the case.

3 Slide the cover back into position.

" Remove the batteries if not using the remote control for an extended period of

time,

Connect the antenna or cable

Use a Kensington lock

There is a Kensington security slot on the back of the TV. Prevent theft by looping a Kensington loci< between the slot and a permanent

object, such as a heavy table.

f o o

o o

Connect to an antenna Any DTV programs that are broadcast in your area can be received for

free through an antenna connection. Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.

Broadcasters are transitioning from analog to digital TV.This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time. The TV produces stereo sound only if a stereo signal is broadcast.

Connect to a cable When yourTV is connected to the cable socket, you might receive free

digital and high definition programs (depending on your cable provider). The channel number for digital and high definition channels includes a dot "." For example, 11.1,46.30, 108.20I. Contact your cable provider

formore information.

Cable

8 EN

Connect to a Direct Broadcast Satellite (DBS) There are two main DBS systems: DirecTV and DishNetwork,These

systems requirea separate, proprietaryset-top box to decode signals and send them to the TV.The set-top box contains a digital TV tuner for receiving off-air digital broadcasts.

Contact your local DBS provider for more information about the connections and theTV channels.

Connect to a set-top box A cable box or satellite set-top box can be connected to theTV through the following connections:

• ANT

• A/V (Composite Video and Audio) S-Video

• YPbPr (Component Video Input)

• HDNI

For information about how to connect a set-top box, see the Quick Start provided.

Connect a set-top box through RF IN/OUT IftheTV is connected to a cable box or satellite set-top box via a

coaxial connection, set theTV to channel 3 or 4, or to the channel

specified by the service provider.

Cable

3 Connect the power cord plug to the power outlet. Ensure that

the cord istightly secured at both ends.

o -- o o

Disconnect the TV from the power

H Caution

" Pull the power- cord by the plug; do not pull on the power- cord,

1 Unplug the power cord from the power outlet. 2 Unplug the power cord from the power connector at the back of

the TV.

iiiiiiiiiii_i!!!!!!!!!!!!!!!!!!!!@i!

:::ii_!!!!!!!!!!!!!!!!!{iiiiiiill

_####################:_

O Sll

Connect a set-top box through component video input or HDMI

_<_.,................

Connect the power cord

Warning

Manage cables

" A cable holder is available in selected models only.

Route your power cord, antenna cable and all other cables through the cable holder at the back oftheTV.The holder helps keep your cables

tidy and easily manageable.

• Verify that your mains voltage corresponds with the voltage printed at the back of the TV, Do not insert the power cord if the voltage is different,

Locate the power connector at the back of the TV.

The location of the power connector varies according to TV

model.

Insert the power cord fully into the TV power connector.

EN 9

Switch on and set up the TV

TheTV turns on automatically after the power cord is inserted into the

power connector.The following screen appears;

@ Next

Press the GREEN button on your remote control to proceed.

Follow the on-screen instructions to select your language and complete

yourTV setup, Insta%tion takes approximately 10 minutes,

" If you connect your- TV to a cable box or- satellite set top box, you do not need to

install channeB,

Finish the setup by selecting your location:

• If you choose [Retail store] your settings are erased each time you turn off the TV, Use this mode for retail store displays only.

• If you choose [Home] you are guided through a choice of picture display options. Press the left or right cursor buttons to select your preferred screen.

10 EN

5 Use yourTV

This section helps you perform basicTV operations,

Switch your TV on/off or to standby

x:ii_!!!!!!!!!!!!!!!!!{i!!iiiiil

_####################?_

• Press CHANNEL +I - on the side of the TV.

• For digital channels, press a number (I to 999) followed by a dot "." and then the corresponding sub channel number (1 to 999).

Ex. 108.30.

• Press CH +/- or enter a number on the remote control.

• Press PREV CH to return to the previously viewed channel.

Adjust volume

To switch on

• Press (5 POWER at the side of the TV, Press d) on the remote control,

To switch to standby

Press O on the remote control,

To switch off

• Press d) POWER at the side of the TV,

Switch channels

To increase or decrease volume

Press VOL +/- on the remote control or press VOLUME +/- on

the side of the TV.

To mute or unmute sound

• Press MUTE on the remote control to mute the sound.

• Press MUTE again to restore the sound. To adjust headphone volume

• Press VOL +/- on the remote control or press VOLUME +/- on

the side of the TV. When headphones are plugged into the TV, the loud speakers are automatically muted.

EN 11

+ 27 hidden pages