SOFTWARE HISTORY
EJ30U_0.101.0.0
• Remove “Subtitle language” from Quick Access menu which can be activated
by “option” button in Remote control.
EJ30U_0.99.0.0
The following issues are solved.
• The set is switched OFF/shut down by itself after a few hours turning ON.
• Plasma TV screen is still glowing for long hours after set is turned OFF.
EJ30U_0.98.0.0
• To add run time option for picture quality controlled by different video
processor IC (design update only)
EJ30U_0.94.0.0
• No picture on one of HDMI input when two HDMI inputs are connected from
separate sources.
EJ30U_0.92.0.0
The following issues are solved.
• Impossible to switch OFF Ambi light when exit from Setting Assistant DEMO mode.
• Dots are visible in certain brightness and contrast level in the sets with Ambi light
feature (regardless of Ambi light turn ON or OFF).
• Preferred location “Shop” mode (TV Menu under Installation/Preferences/Location) is
renamed as “Retail Store“.
• Improvement on “no picture but sound OK “when the set turn ON. (Picture comes
back after hard reset.)
EJ30U_0.81.10.0
To solve the HDMI picture-freeze & image retention issue.
EJ30U_0.81.8.1
To solve the red vertical bars across the screen
.
EJ30U_0.81.8.0
To solve the HDMI picture-freeze issue.
EJ30U_0.81.6.0
To put the HDMI sources to Natural Mode settings if the users set the TV to Shop Mode.
EJ30U_0.81.5.0
To resolve buzz sound on HDMI inputs when Set-Top Box (STB) channels are changed (not
when the FTV channel is changed); or during fast forward or rewind searches with Digital
Video Recorders (DVRs) in STBs with built-in DVR.
EJ30U_0.81.1.0
To resolve the intermittent set hang during power up.
To resolve the dropping of analog channels w/ network ID from the channel map.
EJ30U_0.77.2.0
To resolve the ambilight slow in turning OFF & sometimes doesn’t turn OFF at all.
EJ30U_0.77.1.0
First Production Release
Loading...