Page 1
Register your product and get support at
www.philips.com/welcome
32PFL1409/93
42PFL1609/93
47PFL1609/93
EN User manual
Page 2
Contents
Guide for Preparatory Work
IMPORTANT SAFETY INSTRUCTIONS .................................................. 2
SAFETY PRECAUTION ........................................................................... 3
Panel control and rear terminal control ..................................................... 6
Preparation of remote control ................................................................. 10
Descriptions of remote control function ...................................................11
Connection and preparation of the TV set .............................................. 12
Backboard singal source interfaces ........................................................ 16
Side signal source interfaces .................................................................. 17
Preset and watch TV
Power On/Off .......................................................................................... 18
Auto Standby function ............................................................................. 18
Selecting input signal for TV program ..................................................... 18
Using Menu functions
Menu operation ....................................................................................... 19
Image setting .......................................................................................... 20
Sound setting .......................................................................................... 21
Function setting ...................................................................................... 22
Channel setting ....................................................................................... 23
VGA setting ............................................................................................. 24
Using Remote Control function
Mute setting ............................................................................................ 25
Playback function .................................................................................... 25
Others
Troubleshooting ...................................................................................... 26
Product specications ............................................................................. 27
** Due to the product improvement, the screen display and illustrations may
differ from the actual ones.
1
Page 3
2
IMPORTANT SAFETY INSTRUCTIONS
Explain of Symbol
Dear Philips’ users :
Thanks for using Philips’ color LCD TV. Below is the explain of marking in the
user manual to make it available when you read user manual and use color
LCD TV.
Warning
To reduce the risk of re or electric shock, do not expose this apparatus
to dripping or aplashing.
Do not put any objects filled with liquids, such vases, cup or dressing
cases on the TV set.
Do not put any naked ame sources, such as lighted candles, on the TV
set.
Do not open the TV set for there is dangerous high voltage in the TV set.
For safety reasons it is only allow to be opened by qualied service per-
sonnel.
To reduce the risk of electric shock, do not insert the plug in the AC re-
ceptacles when the AC power cord or plug damaged.
If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. Do not disconnect it by yourself.
Page 4
3
SAFETY PRECAUTION
Install/ Setting
To reduce the risk of re, electric shock , damage and/or personnel hurt , pls.
accord to below instruction when install and use TV set
Install
Install the plat TV set to wall by skilled personnel Incorrect installation is
not safety for you and your TV set.
Install the TV set near the convenience AC power receptacles.Put the TV
set on the stable plane.
Use wall mount or base for your safety
Do not install the TV set near the high heat location, like under sunshine
or near radiator. If near the heat source, the display maybe too hot and
result in the enclosure distortion or others fault.
Do not install the TV set towards the air conditioner directly. If so, the dis-
play panel may dewed and cause fault.
Install on the wall
Keep the min. space marked above around the TV set.
Install with base
Page 5
4
Keep the min. space marked above around the TV set.
Ventilation
Do not block the ventilation opening or insert any object in the enclosure.
Keep spec around the TV set as above illustrate.
Do not install your TV set as below illustrate
Transit
Disconnect all power cord before transit the TV set.
Transit the big size TV set by two or more person.
Grasp the four foreland of TV set and do not press the panel when transit
the TV set.
Hold the bottom when put up or move the TV set.
AC Power Cord
According to below instruction to use AC power cord and receptacles to
reduce the risk of re, electric shock or personnel hurt.
Connect the plug in the AC power receptacle completely.
Use 220V AC power source only
Page 6
5
Keep power cord away from heat source
Withdraw power cord plug and clean it periodical. The insulation may
damage and even cause re if the power cord is covered by dusty and
vapor.
Do not ret power cord
Do not put heavy object against the power cord
Do not pull power cord when withdraw it
Do not connect too many equipment in the same AC power receptacle.
Do not use the incorrect AC receptacle.
Placement
Put the TV set on stable position, otherwise it may drop and damage,
even red.
Do not put TV set near the heat, moisture and dusty place.
Do not put TV set in the position where the hexapod can move in.
Do not put TV set near vibratile objects.
Do not put tinder like candle near the TV set.
Do not put any objects lled with liquids, such as vases on the TV set
Do not put the TV set near water , oil and so on to reduce the risk of re.
Restrict of Using
Do not use TV set outside, such as , under sunlight, seaside or steam-
boat and so on.
Do not use TV set when storm, and disconnect power cord from AC pow-
er source ,also antenna
Page 7
6
Do not use TV set when the surface is damaged. And do not touch TV
set before disconnect from AC power source, otherwise may cause elec-
tric shock.
Disconnect the AC power cord immediately under below situation:
Power cord damaged
AC power receptacle is incorrect
TV set is falling , knocked or bumped caused damaged
Any liquids or solid objects fall into TV set from opening.
Precaution for Safety
It is benet to use this TV set in the weak electromagnetism interference
surroundings. Using near the strong electromagnetism eld or the place
where the signal is covered by electrical noise, will cause the phenom-
ena that picture or sound uctuate or noise interference. Keep the TV set
far away from strong electromagnetism location to avoid equipment dam-
age.
Do not show static picture more than two hours (the lead time depends
on different TV set), otherwise may cause permanent remnant image.
The static picture including symbol, video game, PC image, text le and
picture showed by normal mode.
If display static picture to cause permanent remnant image and inuence
the sight, it is not included in the guarantee to keep it in good repair.
The TV set is not used to displaying image for long time.
Leaving Unused
For environment protect and safety, disconnect the power cord from the
AC power receptacles if not use the TV set for long time.
Page 8
7
For Child
Do not let child climb on the TV set
Put small accessory out of reach by child to avoid child swallow it down
carelessly.
Precaution
Watching TV
Watching TV under proper beam. For watching TV under weak beam or
watching for a long time will damage your sight.
Adjust volume properly to avoid audition hurt by high volume when using
earphone.
Display
The TV set is manufactured by high precision technology and there may
be some light or pixel loss in the display. This is not fault.
Cleaning and maintaining
Disconnect the power cord form AC power receptacle before cleaning
the TV set
Pay attention to below items to avoid material metamorphose or screen
cauterization:
--Use soft cloth clean the dust on screen surface or enclosure. If remain
dusty ,use soft cloth with attenuant soft cleanser.
-- Do not use any hard cushion, alkaline or acidic cleanser, powder or
volatile, such as alcohol, thinner or insecticide etc.
-- When adjust the viewing angle, move the TV set slowly to avoid TV
set shifting or sliding from the desk type base.
Page 9
8
2
3
4
1
5
Panel control and rear terminal control
Explanations:
The following illustration is for your convenience to recognize where all
terminals are located and to connect peripheral equipment; due to the
product improvement, the indications may be different from the actual
one. The actual indications shall prevail.
Side control panel
Side control panel
Explanations on the keys on the side of the TV set and their
functions
1
INPUT: Recall / Close the signal source menu.
2
MENU: Used to recall / Exit menu, etc.
3
VOL+/-:
In TV mode: Increase (+) or decrease (-) volume;
In TV menu: Move right (+) or move levt (-) in the options.
4
CH▲/▼:
In TV mode: Select the next channel (▲) or the previous channel (▼);
In TV menu: Move up (▲) and down (▲) in the options; while in standby
mode, the Channel▲/▼ may be used to turn on the TV set.
5
: Standby On/Off key
Page 10
9
HDMI1
PC IN
AUDIO
TV ANTENNA
CVBS OUT
CVBS IN
76
4
1
2
3
10
9
5 8
CVBS 2/S-VIDEO
S-VIDEO VIDEO
L R
ＳＩＤＥ ＩＯ
Y PR L RPB
HDMI2
9
Y PR L RPB
COMPONENT1
COMPONENT2
HDMI3
VIDEO
L R
VIDEO
L R
Panel control and rear terminal control
Side CVBS and rear terminals
Explanations on the rear terminals and their functions:
1
COMPONENT: Color aberration component (YCbCr, YPbPr) Video/
Audio Input Terminal
AUDIO: VGA audio input terminal
2
3
PC IN: VGA video input terminal
4
CVBS 1 IN: CVBS-1 audio/video input terminal
5
S-VIDEO: Video input terminal (the audio is used the same way as
CVBS-2 IN audio)
6
CVBS OUT: CVBS audio/video output terminal
7
TV ANTENNA: Antenna input terminal
8
Earphone output socket
9
HDMI1/HDMI2/HDMI3 input terminal
10
CVBS
: CVBS audio/video input terminal
2 IN
Page 11
10
Preparation of remote control
3
1
2
Installation of remote control batteries
•• As shown in the following diagram, put the remote control upside down and push open the
battery chamber.
•• Insert 2 AAA batteries as shown in the following diagram.(The positive and negative poles
must correspond to the indication).
•• Put back the battery chamber cover in place.
Never use rechargeable batteries, such as nickel-cadmium batteries.Such
batteries are different in shape and performance, proper operation is therefore
hard to be ensured.
Please properly dispose the waste batteries in a environmentally friendly way.
Precautions for the use of batteries:
Improper use of batteries may cause battery leakage, which may corrode the remote control
or cause battery explosion.The following precautions must be obeyed:
••Always replace batteries in pairs, i.e. replace a pair of old batteries with a pair of new
ones.
••Never use a new batteries together with an old one.
••Never use batteries of different types together, e.g. use a "zinc carbonate" battery together
with an "alkaline" battery.
••Never recharge, short circuit, reassemble, heat or burn used batteries.
••It is necessary to change batteries only when the remote control operates well or bad
occasionally or fails to control the operation of the TV set.
••If you don't use the remote control for a long period, take the batteries out of the remote
control so as not to cause battery leakage thus damaging the remote control.
Precautions while using remote control
Ensure no other objects are between the remote
control and the remote receiver of the TV set.
The remote control can not be kept in hot or
humid environment, otherwise violent impact
may cause the remote control failure.
Sunlight or other strong light may interfere
the signal sent by the remote control.In this
case, please turn the TV set towards the other
direction.
Use two AAA (7#) 1.5V alkaline batteries. Do
not use different types of batteries together.
Mount the batteries as per correct polarity.
Page 12
11
Descriptions of remote control function
Using remote control
Note:Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item
in the list. The list will be removed automatically after three seconds or press OK to remove immediately.
POWER
Press to turn the LCD TV On or off
VIDEO/S-VIDEO BUTTON
Press the button to select CVBS-1,
CVBS-2 and S-VIDEO
HDMI/COMP BUTTON
Press to select YPbPr, HDMI 1, HDMI 2
PC
Press the button to select PC source
TV BUTTON
Press the button to select TV source
NUMBER BUTTON
Press the number buttons for direct
access to the TV channels. For 2 digit
channel, enter the 2nd digit after enter
1st digit
PRE CH
It is only used in TV mode to go back to
the previously watched TV channel.
SLEEP BUTTON
Press to set the LCD TV to turn itself off
within a certain time
SOUND BUTTON
Press this button, you can choose 3
smart mode: personal, speech, music.
When in personal mode, you can
choose Bass, Treble.
NICAM
Press repeatedly to select Mono,
Stereo. Note: The sound mode
selections depend on TV program and
broadcast TV channel of that region.
FREEZE BUTTON
It is used to freeze an instant picture,
and you can return to normal watching
by pressing any key.(Note: It only works
in TV mode. Do not use freezed picture
for long so as not to burn the screen.
WIDE BUTTON
Press this button to display a list of
available display formats. Available
display formats are determined by
the type of signal you are receiving.
To choose the display format you
prefer, press the WIDE button
repeatedly: 4:3, ZOOM 1, ZOOM 2,
1:1(For 720P/1080I).
MUTE BUTTON
Press to eliminate or restore the
LCD TV sound. Mute will appear on
the screen when the sound is muted
DISPLAY BUTTON
Press to see the current channel
information on the TV screen
VOL+/-
Press + or - to adjust the volume
CH +/-
Press to adjust the channel up or
down
MENU
Press menu to activate on screen
menu on/off
SOURCE BUTTON
Press to select the video input
source: TV, CVBS-1, CVBS-2,
S-VIDEO, YPbPr, HDMI1, HDMI2,
VGA.
OK BUTTON
Press the button to con rm your
selection
EXIT BUTTON
Press the button to exit OSD menu
PICTURE BUTTON
Press this button, you can choose
standard, vivid, movie, personal,
enco.
Page 13
12
Connection and preparation of the TV set
Packing lis
If you prepare TV for wall mounting,please call service personnel to
install. Guarantee the safety of TV.
If you need to place the TV unit on the desktop,please buy the
base assembly additional,the installation instruction of base
assembly as follows:
32”/42” base installation
Remote control
Power cord
DFU
Place TV unit face down on a soft and at surface(blanket,foam,cl1.
oth,etc.) to prevent damage to the TV. remove 4 pieces of screws
as indicated in the illustration by cross-shaped screwdriver.
Remove four pieces of screws
Page 14
13
As indicated in the illustration, put the cover_stand 2.
ĸ
ķ
(the screw thread is dense)
(the screw thread is sparse)
on the
a
baseb (the 32” TV overleap this step, turn into the next step
directiy).
Put the base assembly on the right position of rear cover as 3.
indicated in the illustration.
Insert the screws back to the right position as indicated in the 4.
illustration by cross-shaped screwdriver. the 32”TV use the
primary screws, the two long screws in the pe bag for accessory
instead of the two pieces of screws primary in the bottom position
of 42” TV(attention:there are two type of screws as indicated
in the illustration,it must be inserted the right type of screws to
guarantee the safety of TV).
Place the TV unit on a rm and at surface.5.
Page 15
14
47” base installation
Remove six pieces of screws
base
Cover_stand
the two pieces of screws which marked
Place TV unit face down on a soft and at surface(blanket,foam,c1.
loth,etc.) to prevent damage to the TV.remove 6 pieces of screws
as indicated in the illustration by cross-shaped screwdriver.
Take out the base assembly out of the box, and put the cover_2.
stand and base on the table.
Put the base on the right position of monitor and lock it tightly. 3.
Remove the two pieces of screws which mared before Inserting
the screws back to the right position as indicated.
Page 16
15
Insert the screws back to the right position as indicated in the 4.
(the screw thread is dense)
(the screw thread is sparse)
illustration by cross-shaped screwdriver. the two long screws in the
pe bag for accessory instead of the two pieces of screws primary
in the bottom position (attention:there are two type of screws as
indicated in the illustration,it must be inserted the right type of
screws to guarantee the safety of TV).
Place the TV unit on a rm and at surface.5.
Page 17
16
HDMI1
PC IN
AUDIO
TV ANTENNA
CVBS OUT
CVBS IN
Y PR L RPB
HDMI2
Y PR L RPB
COMPONENT1
COMPONENT2
VIDEO L R
VIDEO L R
Backboard singal source interfaces
There are a lot of signal sources that can be connected to your TV set. The
following diagram shows how to connect them.
Friendly tips:
If you want to hang the T V set on a wall, all connecting lines must be inserted
into the ports of the TV set in advance.
Whenever a peripheral equipment is connected to the TV set, be sure the TV
set is powered off.
While connecting peripheral equipment, connect the cable to the terminal with
the same color as its own.
Antenna input:
Insert the antenna terminal into the TV set's antenna socket. This socket is a
75Ω coaxial cable input.
CVBS:
Connect the VIDEO outputs of DVD player, LCD player, video recorder or
video camera, etc. to the VIDEO input of the TV set.
Audio input: Connect the audio signal source (PC, DVD player, LCD player,
video recorder or video camera, etc.) to the audio input port.
CVBS output :
This interface can be used to output the TV signal of the unit to another TV
set.
Component input:
Connect the audio / video of the component signal source (PC, DVD player,
LCD player, video recorder or video camera, etc.) to the component signal
input port.
PC signal and PC audio input:
Connect the PC signal line to the PC and the PC interface of the TV set.
Connect the audio line to the PC audio input interface of a PC or a TV set.
HDMI:
It refers to "high denitiion multimedia interface". It connects the HDMI signal
connecting line to DVD player, etc.
Page 18
17
Side signal source interfaces
CVBS 2/S-VIDEO
S-VIDEO VIDEO L R
SIDE IO
HDMI3
Earphone socket:
The user may use the earphone via the earphone socket.
CVBS-2 /S-VIDEO input:
Connect the VIDEO outputs or S-VIDEO outputs of DVD player,
LCD player, video recorder or video camera, etc. to the VIDEO
input or S-VIDEO input of the TV set. (S-VIDEO is shared with the
CVBS audio)
Audio input:
Connect the audio signal source (PC, DVD player, LCD player,
video recorder or video camera, etc.) to the audio input port.
Page 19
18
Preset and watch TV
The following is how to use the On/Off key ( ) on the TV remote control to turn on/
off the TV set. (Press the key Channel +/- in standby mode may power on the unit,
its the same for the side panel and the remote control.
Power On/Off
1. While switching on the AC power supply, the red indicator lamp stands for standby
mode, while the blue indicator lamp stands for power on.
2. If the TV set is in standby mode, press the On/Off key on the remote control to
power on.
3. Pressing on the On/Off key on the remote control may enter standby mode again.
4. If you don't use the TV set for a long period, unplug the power cord of the TV set
from the socket to save electric energy, because the TV set consumes electricity
even in standby mode.
Auto Standby function
When there is no signal input to the TV set, in order to protect the unit and reduce
power consumption, the TV set may switch to standby mode after 30 minutes if it
is not in PC mode. (It will enter standby mode 30 seconds later if the PC has no
signal.)
Selecting input signal for TV program
If the TV set is not in the TV mode, the
following methods may be used to select
TV program:
1. Press the signal source key on the
remote control to pop out signal source
menu on the TV screen (as shown in the
right diagram).
Press the
/ key to select the option TV,
and then press > key or OK key to con rm
switching to TV input terminal. After such
switching, the signal source selection menu
disappears, and the information on the
current signal source is displayed on the up
right corner of the screen. Repeatedly pressing this key may
exit the signal source menu. If no other operations are made,
the signal source menu will disappear in 5 seconds.
2. Pressing the CH+/- key or up/down / key or number key
may also return to TV mode.
How to select TV program
Selecting TV program
1. Selecting with number key directly
• Press the number key directly to select the desired number
of channel.
2. Selecting with the CH+/- key
• Press CH+ key or up key to select the channel number in
the increasing direction.
• Press CH- key or down key to select the channel number in
the decreasing direction.
Selecting TV volume
Press the VOL+/- key or left/right key to adjust to the desired
volume.
TV
CVBS-1
CVBS-2
S-Video
YPbPr
HDMI-1
HDMI-2
HDMI-3
VGA
Page 20
19
Menu operation
TV
CVBS-1
CVBS-2
S-Video
YPbPr
HDMI-1
HDMI-2
HDMI-3
VGA
Pressing the menu button may display or exit the main menu.1.
In the main menu, you may use the 2. / key to select the
functional options to be adjusted by moving up or down, press the
> to enter the sub-menu adjustment, and press the menu key to
exit the main menu.
In the sub-menu, you may use the <3.
/>
key to make adjustment,
use the / key to select the previous/next option, and press the
menu key to go back to the previous level.
Signal source menu
Press "SOURCE" button to enter the SOURCE menu, including TV,
CVBS-1, CVBS-2, S-Video, YPbPr, HDMI-1, HDMI-2, HDMI-3,VGA.
(with other signal sources, pressing number key or CH +/- key may
switch to the "TV" signal source.)
Pressing the Menu button to enter the main menu
While in TV mode, the adjustable options include picture, sound,
function and channel.
While with CVBS-1, CVBS-2, S-Video, YPbPr, HDMI-1, HDMI-2, the
adjustable options include picture, sound and function.
While in PC mode, the adjustable options include picture, sound,
function and PC.
Page 21
20
Menu operation
I. Image setting
Video preset: Provide five image setting modes including Personal, 1.
Standard, Vivid, Movie, enco. You can adjust the "Contrast, Brightness,
Color and Sharpness" to your taste only in the Personal mode.
Contrast: Make the dark color in the black portion of the image enricher 2.
and make the white color brighter.
Brightness: Adjust the brightness of the image background; it is often 3.
used together with the Contrast, adjustable from 0 to 100.
Color: Adjustable from 0 to 100. Adjustment of this option may change 4.
the color or streak of color of the picture (not available in HDMI mode and
PC mode).
Sharpness: Adjustable from 0 to 100. Adjustment to this option may 5.
change the degree of the clearness and sharpness of the picture (not
available in HDMI mode and PC mode).
Noise reduction: There are four selectable options, i.e. Off, Low, Normal, 6.
High. The user may judge the option according to the actual conditions.
It is selected as "Normal" as default. It is suggested to select "High" in
case of serious noise and close this option in case of minor noise. (not
available in PC mode)
Color temp: Selecting this option in a mode other than PC mode, three 7.
options are available, i.e. Normal, Warm, Cool. In the PC mode, the
"User" option is added for adjusting the RGB color.
Size: In a mode other than PC mode, four options are available, i.e. 4:3, 8.
Zoom 1, Zoom 2 and Wide. When the resolution is 720P or 1080I in the
component/HDMI mode, "1:1" can be selected for the picture size. There
are two size options in PC mode, i.e. 4: 3 and Wide.
Page 22
21
Menu operation
II. Sound setting
Audio preset: Three output sound modes can be set, i.e. Personal, Music 1.
and speech. In the speech and Music modes, it is impossible to adjust
Bass and Treble, while in the Personal mode, you may set the audio
output effect by adjusting the Bass and Treble to your taste.
Bass: Adjustable from 2.
－
10 to ＋10, used to adjust the volume of the low
frequency sound.
Treble: Adjustable from 3.
－
10 to ＋10, used to adjust the volume of the
high frequency sound.
Balance: Adjustable from 4.
－
10 to ＋10; while adjusting from 0～－10, the
volume of the R-CH decreases gradually to zero, while adjusting from 0 to
+10, the volume of the L-CH decreases gradually to zero.
Incredible surround: Switch of surrounding effect, defaulted as off.5.
Automatic volume compensation feature, may control the volume of the 6.
audio output to a certain extent to avoid volume up or down occasionally
which will in uence watching, defaulted as off
Page 23
22
Menu operation
III. Function setting
Menu language: Set the menu language. Defaulted as English. 1.
Menu timeout: Options including 10, 20, 30, 40, 50 and 60 seconds are 2.
available for you to set the menu timeout.
Sleep timer: Set the time interval for the TV set to enter standby mode 3.
automatically. (Not available in PC mode) Timing starts immediately after
the sleep timer is set. Available options of sleep timer include 15, 30, 45,
60, 90 and 120 minutes; select "Off" to cancel the sleep timer setting.
(Note: If the TV set is turned off after timed power on/off is set, the timed
power on/off function cancels automatically) (Pressing the Sleep key in
the Function menu doesn't display the remaining sleep time, but switching
directly to the next sleep time set)
Super contrast: Further enhance the contrast of the TV picture.4.
DCR: Enhance the contrast of dynamic TV picture and give the picture 5.
more feel of layering.
TT language: Set the teletext TV language, available options include 6.
West Europ e, East Eur ope, Slavic, A rabic and Greek. The d efault
language is West Europe.
Reset all: Restore to the preset default value, press the <7.
/> key to
select
and select OK key to execute, return to the main menu option, and the
menu language is restored to “English”. (Note: this operation is somewhat
slower; it will execute in 3 seconds, please wait patiently).
Page 24
23
Menu operation
IV. Channel setting (the following menus only appear in the TV
mode)
Auto search: Search and store program automatically; press the "Menu" 1.
key to exit the Auto search mode.
Update search: Save the stored program and start a new search; Press 2.
the "Menu" key to exit the Update search mode.
Manual search: Press > to enter the sub-menu as shown in the following 3.
diagram
Program NO.: display the number of the current channel.(1)
Program name: allows you to edit the name of the current channel by pressing the (2)
/ key, and you can store the program name after editing it.
Frequency: Display the frequency of the current channel; press a frequency option (3)
once to adjust the frequency by one step length, while pressing and holding it for
3 seconds to search channel manually and the search will stop when a channel is
found; press < to stop the upwards searching and press > to stop the downwards
searching.
Color system: display the color system of the current TV signal, available with Auto, (4)
PAL, NTSC, SECAM and NTSC 443.
Sound system: display the sound system of the current TV signal, available with (5)
DK, I, BG, M and AUTO.
Page 25
24
Menu operation
AFC: It can be set to On and Off. While it is set to On, the TV set will detect the TV (6)
signal automatically, and in case of offset of the signal within a certain range, it can
adjust the channel to the correct position.
Program list: Press > to enter the sub-menu as shown in the following 4.
diagram
It is possible to edit the program list according to the indications at the
bottom of the menu. While selecting a different program with the Up/
Down key in the program list, it will switch to the currently selected
program automatically in 3 seconds.
V. VGA setting (the following menus only appear in the VGA mode)
Auto adjust: Adjust the PC picture to the optimal position1.
H. Position: Adjustable from -50 to 50, adjust the horizontal position of 2.
the picture.
V. Position: Adjustable from -50 to 50, adjust the vertical position of the 3.
picture.
.
Page 26
25
Using Remote Control function
Mute, freezing and playback
■
Mute setting In case an important guest visits you or you receive
an incoming call while watching TV program, you can
simply press the Mute key on the remote control to turn
off the sound of TV program.Pressing the "Mute" key or
the Vol + key again may restore the sound.
Notice:
1. When pressing the Vol- key in the Mute mode, the value of
volume decreases, however it is still in the mute display.
2. After it is muted, any other operations of the TV set can be
carried out in the mute mode.
3. If you press the On/Off to enter the standby mode or disconnect
the AC power supply, the TV set will exit the mute mode after
being turned on again.
4. If no other operations are made, the mute indication is always
displayed.
Playback function
The quick playback fun ction enables you to quickly access the TV
channel you watched the last time.
1. Assuming the number of the TV channel you
watched just now is "8", and the number of
the channel you are watching now is "18" (as
shown in the right diagram).
2. If you want to go back to Channel 8 you
watched just now, simply press the Playback
key.
3. If you want to go back to Channel 18
immediately, simply press the Playback key
again.
Notice:
This function needs to be enabled in TV signal
mode.
Page 27
26
Troubleshooting
Abnormal symptoms Check
image Sound
snow picture Sound noise -Check antenna direction or connections
-If use CATV,Please check if output extent of
CAT V meet N at i on al cri ter ia (60 dB - 74 dB) ,I f
Disturb Sound Noise 1.c hec k if any el ect ronic facility as/ca r/M oto/
natural No sound Check if open mute key 2. Check if control
No picture No sound Ch eck if pow e r cord ins er t t o soc ket .
No color Natural Check if set colo r to lowest one 2.check
Poor picture or distort Sound small or none Re search channel
Natural S o u n d s m a l l o r
distortion
Lost control Pull out power cord plug and reconnect power
Remote controller unuseful Change to new batteries 2.wipe the upside
Unuseful info. on VGA
mode
Need advanced technology to produce LCD or PDP Panel, maybe there are som too bright or dark
pixels. But they will no infect TV functions. It is normal symptoms.
Contact way
If can’t solve the issues you met, please refer the solutions for this product ordinary problems. The
net address is www.Philips.com/support. If still can’t solve issues, please contact the Philips service
center on the country/area list which you stayed. Service hot line:4008 800 008.
Warning:
Don’t try to mend TV by yourself. Or it maybe will result out personal injury or any dam hell and
gone damage on product, also it will be unuseful for product guaranty.
Remark:
Please note the TV Model and SN before contact Philips. These information were printed on TV back
cover and package.
not,pls contact with local TV Station
uorescence disturb 2. Change
power socket to re-insert power cord
1.
Volume to the lowest one.
1.
2.check if Power on 3.check if set image/
Voulme is to lowest one 4. Check if TV in
standby mode.
1.
color pattern if right
1.
Check sound pattern if right 2.adjust the TV
program.
after 10seconds to check if defect disappear.
1.
of remote controller. 3. Check the connection side between battery and remote controller. 4. Check if any influence from ray
like uorescence or neon.
1.
Che ck the large st diffe ren tiate rate and
frequency on adapter 2. Use these date to
compare with date on info. mode.
Page 28
27
Product specications
Function
Item 32PFL1409 42PFL1609 47PFL1609
Viewable size 800mm diagonal
TV function
Video input
Video output CVBS OUT RCA x 1, Audio L / R x 1
PC input
Audio output
Power supply
Operating
environment
Size
PC input function
Support TV, CVBS, S-VIDEO, YPbPr, HDMI inputs
1067mm
diagonal
TV standard
Audio system FM, MONO, STEREO, BILINGUAL
CVBS RCA x 2
S-VIDEO S-VIDEO x 1
Component input
YPbPr/YCbCr
HDMI input HDMI x 3
Recommended resolution 1360*768/60Hz 1920*1080/60Hz
Audio input For stereo earphone mini socket (3.5ø)
Audio output:
L/R
Power supply 200-240V~, 50Hz, 1.5A 200-240V~, 50Hz, 2.5A
Power consumption ≤150W ≤230W ≤270W
Power consumption in standby
mode
Temperature 0°C ~ + 35°C
Storage temperature - 20 °C ~ + 60 °C
Humidity 20% ~ 80%
Wide x Height x Thickness
(including the seat)
Color system: Auto, PAL, NTSC, SECAM,
NTSC 443
Sound system: DK, I, BG, M,
YPbPr/YCbCr x 1
Speaker (built-in): 2 x 5W Speaker (built-in): 2 x 10W
For stereo earphone mini socket (3.5ø)
<1W <1W <1W
782.5x558.6x
209.4(mm)
1009.5x688.1x
262.6(mm)
1194mm diagonal
1124.6x767.9x
313.6(mm)
Page 29
Product specications
Supported display resolutions
Computer formats
HDMI&VGA:
32PFL1409/93
Resolution Refresh Rate(Hz)
640x480 60
800x600 60
1024x768 60
1360x768 60
42PFL1609/93 &47PFL1609/93:
Resolution Refresh Rate(Hz)
640x480 60
800x600 60
1024x768 60
1360x768 60
1440x900 60
1680x1050 60
1920x1080 60
Video formats
32PFL1409/93 & 42PFL1609/93 &47PFL1609/93:
Resolution Refresh Rate(Hz)
640x480P 60
720(1440)x480i 60
720(1440)x576i 60
720x480p 60
720x576p 60
1280x720P 50,60
1920x1080i 50,60
1920x1080p 50,60
Remark:1080P isn't supported by 32PFL1409/93 model.
28
Page 30
Page 31
Q41G32MV813 1A
Manufacturer: Philips(China) Investment Co.,Ltd
Address: 1602-1605 No.218 Tianmu west Road
ShangHai P.R.C
Zip code: 200070 Hot line:4008 80 0008
Published: Sep.200
Loading...