Philips 43PFL5703, 43PFL5603 User Manual

Download

Page 1

Telev is ion s

5000 series

43PFL5703 43

PFL5603

www.philips.com/welcome

EN User manual

To obtain a more detailed electronic copy of this manual or to access live chat support, go to

www.philips.com/support

ES Manual del usuario

Para obtener una copia electrónica más detallada de este manual de usuario o para tener acceso al soporte de chat en vivo, vaya a www.philips.com/support

FR Manuel d’utilisation

Pour obtenir une copie électronique plus détaillée de ce guide ou accéder au soutien par clavardage en direct, visitez le www.philips.com/support

EN For further assistance, call the customer support service

in your country.

• To obtain assistance, contact Philips customer care center;

In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands

1 866 202 5960

México D.F. and área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89

ES Para obtener más información, llame al servicio de

soporte al cliente de su país.

• Para obtener asistencia, comuníquese con centro de

atención al cliente de Philips; En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los Estados Unidos; 1 866 202 5960 México D.F. y área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89

FR Pour obtenir de l’aide supplémentaire, communiquez

avec le centre de service à la clientèle de votre pays.

• Pour obtenir de l’aide, communiquez avec le centre de

service à la clientèle Philips au; Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 202 5960 México D.F. et área metropolitana; 58 87 97 36 Interior de la republica; 01 800 839 19 89

Page 2

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

to get the most benets from your purchase.

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out. Register Online at www.philips.com/welcome to ensure:

*Product safety notication *Additional benets

By registering your product, you'll receive notication - directly from the manufacturer - in the rare case of a product recall or safety defect.

Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving oers.

Know these safety symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the apparatus.

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

For fastest support visit us online for chat and self service solutions at www.philips.com/support

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

• As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

• ALWAYS read and follow all instructions for proper use of your television.

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certication by an independent laboratory (such as UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the television and mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the purchase of a at-panel television. Special care should be made in the placement of older CRT televisions.

• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.

• NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.

• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

Page 3

Important safety instructions

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or

10.

pinched particularly at plugs, convenience receptacles, and the point where they exit from

Unplug this apparatus during lightning storms or

13.

when unused for long periods of time. Refer all servicing to qualied service personnel.

14.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, species that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example of antenna grounding as per NEC National Electric Code

GROUND CLAMP

ANTENNA LEAD IN WIRE

the apparatus. Only use attachments / accessories specied by

1 1.

the manufacturer. Use only with the cart, stand,

12.

tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination

ELECTRIC SERVICE EQUIPMENT

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H )

to avoid injury from tip-over.

English

Wall mount bracket kit

Brand Model # Screw dimension

43PFL5703 43PFL5603

Your TV meets the VESA standard for wall mounting. Consult with your local dealer for a wall mount bracket which is compatible with your TV model.

The recommended wall mount bracket kit (sold separately) allows the mounting of the TV on the wall.

For detailed information on installing the wall mount, refer to the wall mount Instruction book.

P&F USA is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV wall mount bracket or mount the TV onto the bracket on your own.

The wall mount bracket must be installed by experts.

SANUS 25BB M4 x 1.377” (35mm)

P&F USA is not liable for these types of accidents or injuries noted below.

Install the wall mount bracket on a sturdy vertical wall.

If installed onto a ceiling or slanted wall, the TV and wall mount bracket may fall which could result in a severe injury.

Do not use screws that are longer or shorter than their specified length. If screws too long are used this may cause mechanical or electrical damage inside the TV set. If screws too short are used this may cause the TV set to fall.

Do not fasten the screws by excessive force. This may damage the product or cause the product to fall, leading to an injury.

For safety reasons use 2 people to mount the TV onto a wall mounting bracket.

Do not mount the TV onto the wall mounting bracket while your TV is plugged in or turned on. It may result in an electrical shock injury.

When installing the unit on the wall, allow this much space.

Top

Left and right side:5.9 inches (15cm)

Bottom

1 1.8 inches (30cm)

3.9 inches (10cm)

Page 4

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

1 Notice

Trademarks are the property of Koninklijke Philips N.V. or their respective owners.

P&F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. P&F USA warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. P&F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to P&F USA will be adapted and published on the P&F USA support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by service centers and official repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this manual, any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty.

Federal communications commission notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio or television technician for help.

Declaration of conformity

Trade name Responsible party:P&F USA, Inc. Model Address

Telephone number:1 866 202 5960

PHILIPS

43PFL5703, 43PFL5603

1880 Braselton Hwy, Suite 118 #5012 Lawrenceville, GA 30043 U.S.A.

Modifications

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference.

Any modifications to the apparatus must be approved by P&F USA.

The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and regulations.

Canadian notice

CAN ICES-3 (B) / NMB-3 (B) Analog and digital television receiving apparatus, Canada BETS-7 / NTMR-7.

The following FCC/IC RSS applies to the wireless LAN adapter included in this product.

FCC caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Country code statement

For product available in the USA market, only channel 1a1 1 can be operated. Selection of other channels is not possible.

To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that do not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

5150-5250 MHz band is restricted to indoor operations only.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Compliance with IC requirement RSS-210 A9.4.4

Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure.

Page 5

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Positioning the TV

Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.

Make sure to hold the upper and bottom frames of the unit firmly as illustrated.

Install the unit in a horizontal and stable position.

Do not install the unit in direct sunlight or in a place subject to dust or strong vibration.

Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

When installing this unit in a temperate environment, avoid a place with rapid temperature changes.

–

Operating temperature: 41°F (5°C) to 104°F (40°C)

This unit should not be used in a tropical environment as it has not been evaluated under such conditions.

No objects should be placed directly on or under this unit, especially lighted candles or other flaming objects.

Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

Do not insert the AC power cord into the power socket outlet before all the connections are made.

Ensure that you always have easy access to the AC power cord and outlet to disconnect the TV from the AC outlet.

Before you move the TV, disconnect attached cables to prevent damage to connectors, especially the TV tuner.

Be sure to unplug the AC power plug from the AC outlet before moving or carrying the unit.

When moving the TV and then setting it down, please be careful not to pinch the AC power cord under the unit.

Regulatory notices

WARNING:To prevent injury, this apparatus must be securely

WARNING:Never place a TV in an unstable location. A TV may fall,

If your existing TV is being retained and relocated, the same considerations as above should be applied.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

In order to avoid interruption of ventilation, this unit should not be placed in built-in equipment such as a book cabinet, rack, etc., and the vents of this unit should not be covered with anything such as a tablecloth, curtain, newspaper, etc. Make sure that there is enough ventilation space (4inches / 10cm or more) around this unit.

attached to the furniture / wall in accordance with the instructions. Tipping, shaking or rocking the unit may cause injury / death.

causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

–

Using cabinets or stands recommended by the manufacturer of the TV.

–

Only using furniture that can safely support the TV.

–

Ensuring the TV is not overhanging the edge of the supporting furniture.

–

Not placing the TV on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a suitable support.

–

Not placing the TV on cloth or other materials that may be located between the TV and supporting furniture.

–

Educating the children about the dangers of climbing on furniture to reach the TV or its controls.

Press  to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power plug from the AC power outlet. Disconnect the AC power plug to shut the unit off when trouble is found or not in use. The AC plug shall remain readily available.

AC power plug

Never use a gas duster on this TV. The gas trapped inside of this unit may cause ignition and explosion.

Environmental care

The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging.

For product recycling information, please visit -

www.recycle.philips.com

English

End of life directives

Philips pays a lot of attention to produce environmentalfriendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

 Batteries usage

CAUTION:Danger of explosion if battery is incorrectly replaced.

WARNING:Batteries (battery pack or battery installed) should not

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh,Li-ion, etc.) batteries.

Replace only with the same or equivalent type.

be exposed to excessive heat such as sunshine, fire or the like.

Disposal of used batteries

The batteries included do not contain the heavy metals mercury and cadmium, however in certain localities, disposing batteries with household waste is not permitted. Please ensure you dispose of batteries according to local regulations.

Page 6

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Downloading an electronic copy

To obtain a more detailed electronic copy of this manual:

Point your browser to : www.philips.com/support

Choose your country of location with language.

Enter the product name or number in the search field.

Alternatively, you can browse the catalog. Click the description or model.

Under product support, click “User manual”.

Preparing to move / ship the unit

Please pack the unit properly by following the diagram on the carton (as noted below).

To avoid damage to the screen, do not pack the stand on the same side as the TV screen, refer to the illustration above.

All other registered and unregistered trademarks are the property of their respective owners.

The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

The American Academy of Pediatrics discourages television viewing for children younger than two years of age.

Some features may require an always-on broadband internet connection, firmware update and/or a minimum bandwidth. Internet services vary by location.

P&F USA Inc. / P&F MEXICANA, S.A.de C.V. do not warrant access to the portal or to any of the services, content, software and advertising. P&F USA Inc. / P&F MEXICANA, S.A. de C.V. or third party content/service providers may, in their sole discretion, add or remove access to any specific services, content, software and advertising at any time. Although P&F USA Inc. / P&F MEXICANA, S.A. de C.V. will strive to provide a good selection of services, content or software, P&F USA Inc. / P&F MEXICANA, S.A. de C.V. do not warrant continued access to any specific services, and content or software.

P&F USA Inc. / P&F MEXICANA S.A. de C.V. do not warrant wireless screencasting compatibility with all source devices such as smartphones, tablets, laptops, etc. Due to large variability in hardware, firmware, drivers, software and implementation of wireless casting applications on these source devices. Although P&F USA Inc. / P&F MEXICANA S.A. de C.V. will strive to enhance compatibility and performance across a range of source devices, P&F USA Inc. / P&F MEXICANA S.A. de C.V. do not warrant compatibility with specific source devices.

YouTube and the YouTube logo are trademarks of Google Inc.

PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.

Sonic Emotion and the Sonic Emotion logo symbol are registered trademarks of sonic emotion ag.

Netflix is available in certain countries. Streaming membership required. More information at www.netflix.com.

VUDU™ is a trademark of VUDU, Inc.

Page 7

OUT

RF cable

Antenna

Cable

HDMI cable

Video + Audio (L/R)

cables

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Contents

1 Notice ............................................................ 4

2 Getting started ........................................ 7

Connecting antenna or Cable / Satellite / IPTV set-top box

3 Use your TV .............................................. 8

Watching channels from an external device Displaying setup using Home menu Network Home network Wireless screencasting Net TV Changing picture and sound settings Changing picture format Caption settings Child and ratings lock Channel lock Setting your location to home Voice guide HDMI mode Viewing photos, playing music and

watching videos on a USB memory stick

4 Install channels .................................... 15

Reinstall channels

5 Troubleshooting tips ........................ 16

6 Specifications ....................................... 17

License

7 Warranty .................................................. 18

2 Getting started

Connecting antenna or Cable / Satellite / IPTV set-top box

Be sure your antenna or another device is connected properly before plugging in the AC power cord.

If connecting to an antenna through an RF cable

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

8 8

Antenna

8 9

If connecting a set-top box through an HDMI

cable

If the TV is connected to a cable / satellite set-top box

via an HDMI cable, make sure you select the correct

source by using SOURCE.

Antenna

RF cable

13 13

HDMI cable

14 14 14

Note(s)



If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try

switching the HDMI mode. (Refer to HDMI mode  p. )

It is recommended to use an HDMI-certified High-Speed HDMI® cable. If you do not use an HDMI-certified cable, you might have display issues as a result of connection errors.

Connecting Cable / Satellite / IPTV settop box, Blu-ray Disc™ / DVD recorder via composite connectors and analog audio

Do not place your recorder too close to the screen because some recorders can be susceptible to harmful

interference from the TV.

OUTOUT

RF cable

Video + Audio (L/R)

Note(s)



If there is no input signal and no operation for 15 minutes, the unit will go into standby mode automatically.

cables

OUT

RF cable

OUT

Set-top box

Video +

Audio (L/R)

cables

OUT

Blu-ray Disc™ / DVD recorder

Cable

Satellite

Cable

OUT

English

Page 8

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

3 Use your TV

Watching channels from an external device

Turn on the set-top box or the connected device.

The picture from the set-top box or the connected device might appear automatically on the TV screen.

If the picture does not appear

Press SOURCE and use  to select the settop box or the connected device, then press OK.

Use the remote control for the set-top box or the

connected device to select channels to view.

Displaying setup using Home menu

Press  to display Home menu.

Wireless

Home Network

Source

Use  to select Setup, then press OK.

Screencasting

Guide to Home menu screen

Home menu start screen

abcde

SetupNet TV

Network

Setup network connection settings in order to use Net TV or network upgrade functions.

Display Setup using Home menu and use  to select Connect to network, then press OK.

Connect to network

Before you proceed to Connection test or other settings in Network section, run the network settings assistant to

connect the TV to your network.

Wireless setting

Select to use a wireless LAN to connect to the internet by a wireless connection.

Use  to select Wireless, then press OK.

Use  to select the desired setting, then press OK, and follow the On-screen instructions.

Select this setting if your router has an easy connect button. Start scanning for wireless

Easy Connect

Scan

Manual entry

Wired setting

Select to use an Ethernet cable to connect to the internet by a wired connection. Please purchase shielded Ethernet cables at your local store and use it when you connect to network equipment.

Use  to select Wired, then press OK.

Connection test will start automatically. (Refer to Connection test  p. .)

networks on the TV after pressing the easy connect button on your router. If connection test fails, refer to the router’s manual for more details.

Search for wireless networks automatically and select the wireless network name (SSID) from the list.

Set up the connection to the wireless LAN Access Point (AP) (e.g. wireless router) manually by entering the wireless network name (SSID).

Wireless

Home Network

Source

Source : To select TV source or



Home Network : Accesses home network



Net TV : Accesses Net TV menus.



Wireless Screencasting : Accesses wireless



Setup : Accesses menus that allow



Please read the detailed version of this User manual on www.philips.com/support for more information on menu features.

Screencasting

connected devices.

menus.

screencasting menus.

you to change picture, sound and other TV settings.

SetupNet TV

Connection test

Perform the following steps to test your internet connection after you have connected an Ethernet cable or entered network settings such as IP address, DNS settings, etc. manually.

Display Setup using Home menu and use  to select Network settings, then press OK.

Use  to select Connection test, then press OK.

Connection test will start automatically and the test result for home network and internet will appear right after the connection test finishes.

“Testing…” is displayed while the connection test is in progress.

Continued on next page.

Page 9

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Home

network

Pass Pass

Fail -

Pass Fail

Press OK to go to the list on network status

confirmation screen.

Internet Description

Connection test is successfully completed.

Connection test for home network failed. Check the connection settings.

Connection test for internet failed. Check the connection settings.

If the connection test for internet passes, speed test will start automatically.

Wireless screencasting

You can wirelessly cast or mirror the screen of your Smartphone, Tablet or PC to the TV directly using wireless screencasting.

Using wireless screencasting

For wireless connection

Network connection test

IP address

Subnet mask

Default gateway

Primary DNS

Secondary DNS

SSID

Authentication Done

192, 168, 1, 1

255, 255, 255, 0

192, 168, 1, 254

0, 0, 0, 0

AP Name

Back

For wired connection

Network connection test

IP address

Subnet mask

Default gateway

Primary DNS

Secondary DNS

192, 168, 1, 1

255, 255, 255, 0

192, 168, 1, 254

0, 0, 0, 0

Back

Using wireless screencasting device list

Note(s)



If the connection test for both home network and internet pass, you are ready to use Net TV or network upgrade functions using the internet without making any additional settings.

If the connection test fails, check if the Ethernet cable is connected to this TV properly or if you have entered all the required details for the wireless LAN connection properly.

In wireless screencasting device list, you can find the connected devices.

Home network

You can turn your TV into a Digital Media Renderer (DMR), which can play video, music and photo files stored on certified home media servers connected to your home network.

Press  and use  to select Setup, then press OK.

Use  to select Network settings, then press OK.

Use  to select Home network, then press OK.

Use  to select the item you want to adjust, then press OK.

Renderer

Renderer name

Off Disable DMR.

Enable this unit to play files using

Change the display name of this TV to other devices on the home network.

DMC.



Press  and use  to select Wireless Screencasting, then press OK.

Wireless screencasting mode screen appears.

The TV is now ready to accept a connection from your source device.

PHILIPS_Smart_TV

If you want to exit, please press "BACK" key. If you want to manage connected device history, please press "OPTIONS".

Your TV name

Activate wireless screencasting feature on your device.

For the operation of your device, please check the instruction manual of the device.

Select Your TV name on your device if needed.

If PIN code is required on your device, please enter the 8-digit code appearing in the left-hand side of the TV screen.

Once connected, the screen of your device will appear on your TV screen.

Press INFO to display your device name at the bottom of TV screen.

Press . or OK to pause playback. Press . or OK again to resume playback.

Press OPTIONS on remote when wireless screencasting mode is on the TV screen.

Only the connected device names are listed.

It will be sorted from newest connection to oldest connection. A maximum of 64 connections can be recognized.

If you would like to delete a listed connection, press  to select the device name, then press OK first. Once the confirmation message appears, please use  to select

Yes, then press OK.

Note(s)

English



Continued on next page.

Page 10

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Net TV

Net TV offers internet services for your TV. Use the TV remote control to browse the Net TV pages. You can play movies, listen to music and much more, all from your TV screen.

–

Because Net TV is an online system, it can be modified over time to better serve its purpose.

–

Some Net TV services can be added, changed or stopped after some time.

–

You cannot download and save files or install plug-ins.

Before using Net TV

Follow the procedure below before using Net TV.

Connect this unit to the internet.

Set up the necessary network connection settings.

(Refer to Network  p. .)

Using Net TV

Press NETTV.

Net TV screen will appear, then use  to select service icon.

For the first time only, Terms of Use screen will appear. After confirming the content, use  to select Agree, then press OK.

Guide to Net TV menu screen

Net TV start screen

Featured AppsNow on TV

 Now on TV

 Featured Apps  Selected Apps  Country  Terms of Use App Gallery

! Option

Displays the image of the input under present tuning.

Displays fixed net service icons.

Displays movable net service icons.

Selects what country you live in.

Displays a copy of net service.

Displays unregistered net service icons.

Remove or move App.

Terms of UseApp GalleryOption

Information on network services

For detailed information on 3rd party internet services, please visit the service providers website:

Netflix

VUDU

For additional help, refer to the Frequently Asked Questions FAQs at www.philips.com/support. Select TV and enter your model number.

http://www.netflix.com

http://www.vudu.com

Country: USA

Changing picture and sound settings

You must set Home in Location.  p.  Otherwise, personalized picture and sound settings

will not be memorized after the unit goes into standby mode.

Changing picture settings

Press  and use  to select Setup, then press OK.

Use  to select TV settings, then press OK.

Use  to select Picture, then press OK.

Auto picture Backlight Contrast Brightness Color Tint Sharpness Pixel Plus Ultra HD Advanced settings Picture format Mode selection Horizontal position Vertical position

To select the desired setting, then press OK (Personal, Standard, Natural, Vivid, Sports,

Movie, Game, Energy saving and Internet video)

Cursor

To reduce power consumption and brightness

To decrease color intensity

Enters sub-menus to adjust the following settings: (Dynamic contrast, Color enhancement, Black

stretch, 120 PMR, 4K UHD Upscaling, Macro Dimming, Noise reduction and MPEG artifact reduction)

Enters sub-menus to adjust the following settings: (Color alignment, Custom color management,

Gamma, Blue stretch and Film mode)

Movie expand 14:9

Movie expand 16:9



Automatic

Super zoom

4:3

Wide screen

Full

Manual Zoom

Unscaled

HDTV

Cursor

To increase power consumption and brightness

To increase color intensity

Changing picture format  p. 

To turn off image enhancement features which makes the TV to act purely as a monitor

To enable image enhancement features to improve picture quality

5 6

Picture

Sound Features Installation Accessibility

Use  to select the item you want to adjust, then press OK.

Auto picture

Backlight

Contrast To decrease contrast To increase contrast

Brightness To decrease brightness To increase brightness

Color

Tint To add green To add red

Sharpness To soften To sharpen

Pixel Plus Ultra HD

Advanced settings

Picture format

Mode selection



Continued on next page.

Page 11

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Horizontal position To move PC screen left

Vertical position

To move PC screen down

Cursor



To move PC screen right

To move PC screen up

Cursor

Changing sound settings

Press  and use  to select Setup, then press OK.

Use  to select TV settings, then press OK.

Use  to select Sound, then press OK.

Picture

Sound

Features Installation Accessibility

Use  to select the item you want to adjust, then press OK.

The following sound settings can be configured. Depending on the sound source, some sound settings are not available.

Auto sound

Equalizer

Balance

Emotion

Enhancement

Sonic

Emotion

Premium

Enhancement

Absolute

3D Sound

Auto volume leveling

TV speakers

Headphone volume Adjusts headphone volume

Auto sound Equalizer Balance Sonic Emotion Premium Auto volume leveling TV speakers Headphone volume Digital output format Delta volume

To select the desired setting, then press OK (Personal, Standard, Vivid, Sports, Movie, Music and News)

To select the specific frequency using and use  to adjust the level, then press OK

Adjusts the balance of the right and left speakers to best suit your listening position

Sonic

Dialog

Bass

Off To set Sonic Emotion to off On To set Sonic Emotion to on

To set Dialog Enhancement to

Off

off To set Dialog Enhancement to

Off To set Bass Enhancement to off On To set Bass Enhancement to on Off To set Absolute 3D Sound to off On To set Absolute 3D Sound to on

To remove the Auto volume

Off

leveling To reduce volume differences

between the TV commercials and the programs

No output sound from the unit’s

Off

speakers To output sound from the unit’s

speakers

Speakers EasyLink

To control audio output from your connected HDMI link devices



Digital output format

Delta volume

PCM To output PCM format

Bitstream

Provides the ability to set a custom volume level for the current channel or input source.

If the source volume is too loud, set a negative value (-1 to -12)

If the source volume is too soft, set a positive value (+1 to +12)

To output audio in its native format as Bitstream to connected audio receiver

Changing picture format

Display modes can be selected when your TV receives a 16:9 or 4:3 video signal.

Three types of display modes can be selected for a PC input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal (2160p)

English



Full Unscaled

For 16:9 video signal (not 2160p)

Manual Zoom

Other than DTV and HDMI connected devices,

Automatic

4:3

Wide screen

Unscaled Displays a 16:9 picture at its original size.

Full

Manual Zoom

enlarges the picture to best fit the screen. DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible.

Displays a 16:9 picture at a 4:3 size; the picture is shortened horizontally. Sidebars appear on both edges of the screen.

Displays a 16:9 picture that is stretched horizontally and vertically.

Displays a scaled 16:9 picture. Bars appear on both the upper and lower portions of the screen depending on the type of video signal.

Allows step by step vertical and horizontal stretching of the picture size to suit your viewing preferences. Manual zoom can distort the aspect ratio of the image, to switch back to a normal mode select Automatic / Normal.

Full

Manual Zoom

4:3Automatic

Wide screen

Continued on next page.

Page 12

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

For 4:3 video signal

4:3Super zoomAutomatic

Manual Zoom

Automatic

Super zoom

4:3

Movie expand

14:9

Movie expand

16:9

Wide screen

Manual Zoom

Wide screen

Movie expand 16:9

Other than DTV and HDMI connected devices, enlarges the picture to best fit the screen. DTV and HDMI connected devices display the picture at its original size. The subtitles may remain visible.

Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically and its left and right edges are enlarged. This crops out some of the top and bottom of the picture.

Displays a 4:3 picture at its original size. Sidebars appear on both edges of the screen.

Displays a 4:3 picture at a 14:9 size; the picture is stretched horizontally and vertically. This crops out some of the top and bottom of the picture. Sidebars appear on both edges of the screen.

Displays a 4:3 picture at a 16:9 size; the picture is stretched horizontally and vertically. This crops out some of the top and bottom of the picture.

Displays a picture that is stretched out of proportion to fill the screen.

Movie expand 14:9

For PC input signal

UnscaledWide screen4:3

This unit can also be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this video connection and it requires stereo mini 3.5mm plug audio cable for analog audio signal as well.

Refer to 16:9 video signal on this page if the PC has HDMI output.

4:3

Wide screen

Unscaled Displays a picture in its original size.

If the signal source has side or top-bottom bars inserted into the picture, the picture format function will not eliminate them.

Displays a proportionately stretched picture. Sidebars appear on both edges of the screen.

Displays a picture that is stretched out of proportion to fill the screen.

Caption settings

Closed captions displays the audio portion of the program as superimposed text over the video.

Press  and use  to select Setup, then press OK.

Use  to select TV settings, then press OK.

Use  to select Accessibility, then press OK.

Use  to select Caption settings, then press OK.

Closed captions

You can choose the closed caption display.

Use  to select Closed captions, then press OK.

Use  to select On, Off or CC w/mute, then press OK.

Cable / NTSC (Analog) TV operation

Caption service

Use  to select Caption service, then press OK.

Use  to select the desired Caption service, then press OK.

CC-1 and

CC-3 and

CC-4, T-2

and T-4

Digital caption service

CS-1 to

Digital caption options

You can choose the size, font, color, background and other characteristics for the captioned text.

The primary closed captions and text services. The closed captions or text is displayed in the

T-1

same language as the program’s dialog (up to 4 lines of script on the TV screen).

Serve as the preferred data channels. The closed

T-3

captions or text is often a secondary language. Rarely available and broadcasters use them only

in special conditions, such as when CC-1 and CC-3 or T-1 and T-3 are not available.

There are 3 display modes according to programs:

CC-2,

Use  to select Digital caption service, then press OK.

Use  to select the desired Digital caption

service, then press OK.

CS-6

Use  to select Digital caption options, then press OK.

Paint-on

Pop-on

Roll-up

Select one of these before changing any other item in Caption settings menu. Choose CS-1 under normal conditions.

Displays characters on the TV screen immediately.

Once characters are stored in memory, they are displayed all at once.

Displays the characters continuously by scrolling (max. 4 lines).

Digital TV operation

Use  to select an item and press OK, then use  to Select the desired Setting and press OK.

Continued on next page.

Page 13

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Note(s)



Closed captions service may not be controlled by this unit’s menu options if you are watching television through a set-top box. In which case you will need to use the menu options on the external set-top box to control closed captions.

The captions do not always use correct spelling and grammar. Not all TV programs and product commercials include closed captions information. Refer to your area TV program listings for the TV channels and times of closed captions shows. The closed captions programs are usually noted in the TV listings with a service mark such as CC.

Not all closed captions services are used by a TV broadcaster during the transmission of a closed caption program.

The EUT (Equipment Under Test) setting that satisfies

§ 79.102 (e) is as follows:

–

Font: Mono-font

–

Character size: Large

Child and ratings lock

You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings.

Press  and use  to select Setup, then press OK.

Use  to select Channel settings, then press OK.

Use  to select Child lock, then press OK. Use the NUMBER buttons to enter the 4-digit

numbers for your PIN code.

When you have not set up your PIN code, enter 0, 0, 0, 0.

When the PIN code is correct, Child lock menu is displayed.

Setting TV and movie ratings

TV ratings lock has controlled access to individual programs based on their age and content rating. Movie ratings lock is the rating system created by MPAA.

Use  to select TV ratings lock or Movie ratings lock, then press OK.

Use  to select the desired rating, then press OK repeatedly to switch between block and view.

For US TV ratings, you can further set the sub ratings to block specific elements within programs.

or  indicates that the rating is locked (Blocked).

indicates that the rating is not locked (Viewable).



Movie

ratings

PG-13 – Unsuitable for children under 13

NC-17 – No one under 17 admitted

TV ratings Description

All All ratings locked including no rating

NR None No rating

– TV-Y Appropriate for all children

– TV-Y7

G TV-G General audience

PG TV-PG Parental guidance suggested

– TV-14 Unsuitable for children under 14

R –

X TV-MA Mature audience only

Appropriate for all children 7 and older

Restricted under 17 requires accompanying parent or adult guardian

Canadian English or Canadian French ratings

You can select the rating for Canadian English or Canadian French broadcasting.

Use  to select Canadian English rating or Canadian French rating, then press OK.

Use  to select the desired rating, then press OK repeatedly to switch between block and view.

indicates that the rating is locked (Blocked).

indicates that the rating is not locked (Viewable).



Canadian

English

rating



The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to block NR, None or E programs are used in Movie ratings lock, TV ratings lock, Canadian English rating or Canadian French rating accordingly “unusual results may occur and the unit may not receive emergency bulletins or other types of programming”: / Emergency bulletins (Such as EAS messages, weather warnings and others) / Locally originated programming / News / Political / Public service announcements / Religious / Sports / Weather.

Canadian

French

rating

All Locked all ratings

E Exempt program

C – For all children

C8+ – For all children 8 and older

G General audience

– 8 ans+ Unsuitable for ages under 8

PG – Parental guidance suggested

– 13 ans+ Unsuitable for ages under 13

14+ – Unsuitable for ages under 14

– 16 ans+ Unsuitable for ages under 16

18+ 18 ans+ Adult audience only

Description

Note(s)

Channel lock

Set it to restrict access on particular channels.

Press OK while viewing a TV program.

Channel list will be displayed.

Use  to select a channel, then press red key.

Use the NUMBER buttons to enter the 4-digit

numbers for your child lock code.

The channel will be marked with icon.

To unlock channels, select a channel to unlock at step 2.

Set it to restrict access on external inputs.

Press SOURCE and use  to select an input.

Press OPTIONS and use  to select Lock or Unlock, then press OK.

Use the NUMBER buttons to enter the 4-digit

numbers for your child lock code.

English

Continued on next page.

Page 14

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Setting your location to home

You can set the Location on your TV to Home or Retail. Choosing Home gives you full flexibility to

change predefined settings for picture and sound.

Press  and use  to select Setup, then press OK.

Use  to select TV settings, then press OK.

Use  to select Installation, then press OK.

Picture Sound Features

Installation

Accessibility

Use  to select Preferences, then press OK.

Use  to select Location, then press OK.

Use  to select Home, then press OK.

Note(s)



You must set Home in the menu. Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode.

Language Preferences Restore default settings

Voice guide

Lets you configure voice guide and its settings.

Press  and use  to select Setup, then press OK.

Use  to select TV settings, then press OK.

Use  to select Accessibility, then press OK.

Use  to select Voice guide, then press OK.

Voice guide

toggle

Speed

Pitch

Verbosity

Volume level

Off To set Voice guide off On To set Voice guide on

Fast

Normal

Verbose Set voice guide explanation

Succinct

Normal

Set voice guide speed based on your preference

Slow

High

Set voice guide pitch based on your preference

Low

verbosity based on your preference

Loud

Set voice guide volume based on your preference

Soft

HDMI mode

If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try switching the HDMI mode following the instructions below.

Press  and use  to select Setup, then press OK.

Use  to select TV settings, then press OK.

Use  to select Installation, then press OK.

Use  to select Preferences, then press OK.

Use  to select HDMI mode, then press OK.

Use  to select HDMI1, HDMI2 or HDMI3, then press OK.

Use  to select 4K mode or 2K mode (Compatibility) depending on the output capabilities of the external device, then press OK.

When switching the HDMI configuration, the screen will black out for a moment, then come back on.

Note(s)



The HDMI connector with HDMI mode set to 2K mode (Compatibility) supports up to UHD 30P, while The HDMI

connector with HDMI mode set to 4K mode supports up to UHD 60P with HDR signal.

Switching the HDMI mode may cause loss of HDMI CEC functionality in certain cases.

Continued on next page.

Page 15

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

Note(s)

Viewing photos, playing music and watching videos on a USB memory stick

Your TV is fitted with a USB connection that enables you to view photos, listen to music or watch video files stored on a USB memory stick.

Press SOURCE and use  to select USB, then press OK.

Use  to select the desired file, then press

OK.

Photo

These recorded files must meet specifications shown below:

Picture (JPEG / Progressive JPEG)

JPEG Upper limit 4000x4000 pixels

Progressive JPEG Upper limit 1024x768 pixels

Music (MP3 / WAV / AAC)

MP3

WAV

AAC

Video (MPEG / VOB / AVI / MP4)

Maximum

video

Extension .avi

Audio codec

Dolby Digital YES YES YES YES YES YES

MPEG1/2

audio layer

1/2/3

LPCM YES YES YES YES YES YES

AAC-LC YES YES YES YES YES YES

Photo

USB DISK 2016_12_24 folder_A folder_B folder_C

Sampling frequency 16 kHz - 48 kHz

Constant bit rate 8 kbps - 320 kbps

Sampling frequency 8 kHz - 48 kHz

Constant bit rate 64 kbps - 1.5 Mbps

Sampling frequency 8 kHz - 48 kHz

Constant bit rate -

H.264, H.265/HEVC: 3840x2160@30fps,

MPEG: 1920x1080@60fps

.ts,

.mpg,

.trp,

.mpeg

Video

MPEG1,

codec

MPEG1,

MPEG2,

MPEG4,

MPEG4

H.264

YES YES YES YES NO YES

.vob .mp4 .mkv

.tp

MPEG1, MPEG2,

MPEG1,

H.264,

MPEG2

H.265/

HEVC

MPEG1, MPEG2, MPEG4,

H.264, H.265/ HEVC

MPEG1, MPEG2, MPEG4,

H.264, H.265/ HEVC



This unit accepts USB memory stick only. Other storage devices such as external HDD by USB bus power will not work.

Do not use an extension cord and/or USB hub to connect devices to this unit. Always directly insert the USB flash memory stick to this unit directly.

We cannot be held responsible if your USB memory stick is not supported, nor will we accept any liability for damage or loss of stored data.

The USB memory stick is not included with this TV.

A maximum of 1,023 folders or files can be recognized.

A file name exceeding 256 characters or contains a dot character is not supported on this TV.

A USB memory stick that required its own driver or the device with a special system such as fingerprint recognition are not supported.

Be sure to keep a backup copy of the original files on your USB device before you play them back on this unit. We have no responsibilities for damage or loss of your USB stored data.

To avoid damaging the USB memory stick and the unit always turn off the unit before you remove the USB memory stick.

This unit is not allowed to use the USB memory stick which requires external power supply (500 mA or more).

This unit does not support MTP (Media Transfer Protocol) or the file other than FAT16 and FAT32 file system. If the file is not supported, an error message appears.

When the unit does not recognize the USB memory stick, try reconnecting it.

Playing the files recorded with high bit rates, the images can be interrupted in some occasions.

This unit does not support external subtitles.

This unit cannot play back a file which goes over the limit of file restriction limit.

4 Install channels

Reinstall channels

Be sure the RF cable is correctly connected to this unit and you are registered with your cable TV provider when you install cable channels.

Press  and use  to select Setup, then press OK.

Use  to select Search for channels, then press OK.

Use  to select Start, then press OK.

Use  to select Antenna or Cable, then press OK.

Select Start, then press OK.

Channel search will start automatically.

Channel settings

System searching. Please wait...

Auto programming may take more than 20 minutes to complete.

Stop

12 3 4

Press OK on Finish to complete.

Digital channels found: Analog channels found:

Total progress:

0 0

English

Page 16

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

5 Troubleshooting tips

If the unit does not perform properly when operated as instructed in this manual,

Please check the following Troubleshooting tips and all connections once before calling for service.

Power

No power

Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC outlet operates normally.

If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.

Remote

Remote control buttons or remote itself does not work.

Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote control battery area.

When there is an infrared-equipped device near this unit, it may interrupt the remote control signal from this unit.

Make sure that nothing is blocking the unit's remote control sensor and the remote control is pointed at this remote control sensor.

Press and hold any key on remote control toward a digital or cell phone camera. The remote control is working if you confirm a flashing infrared light through the camera. Some dual camera cell phones may have an IR filter in one or both of the cell phone cameras.

Universal remote control does not work properly.

Refer to the User manual of the universal remote control for the Philips code.

Picture

Power is on but no screen image.

Check whether the connection for the antenna, cable or settop box is connected correctly.

Check whether all the cables to the unit are connected to the correct output jack on your separate device like Blu-ray Disc™ / DVD recorder.

Check if your computer is NOT in sleep mode when the input mode on this unit is in PC mode. Tap any key on the computer keyboard to wake it up.

Check if the correct input mode is selected by pressing

SOURCE.



No color

Adjust Color in Picture settings.  p. 

Picture poor, sound OK

Electrical interference from nearby appliances may affect picture quality.

Adjust Contrast and Brightness in Picture settings.  p. 

For the best picture quality, watch “High Definition” wide screen programs. If the HD content is not available, watch “Standard Definition” programs instead.

You see noise or trash on the screen.

When the capabilities on the unit exceed the capabilities of the digital broadcasting, the signal will be increased to match the capabilities of the display on the unit. This may cause noise or trash.

Unusual picture appears and the TV does not operate.

Press the power button first. If it does not solve, follow the procedure below.

Press the buttons on the remote control in the order shown below.





Unplug the AC power cord, then wait for 1 minute, and then



plug it in again.

Picture & Sound

No picture or sound

View other TV channels. The problem might be limited to the broadcasting station or weak signal strength.

Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn on the unit again.

Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast.

The selected channel cannot be viewed by the Child and ratings lock setting.  p. 

The unit requires some kind of input signal. A digital indoor antenna (VHF / UHF), a digital external antenna (VHF / UHF) or an RF coaxial cable from your wall or set-top box signal (HDMI, Component+Audio or Composite [Video+Audio]) needs to be connected to the unit.

If there are issues with picture/color and/or sound when connecting an external device using the HDMI port, please try

switching the HDMI mode. (Refer to HDMI mode  p. )

Adjusted picture or sound settings are not effective every time the unit is turned on.

You must set to Home in Location.  p.  (Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.)

You see a distorted picture or hear an unusual sound.

You may be getting NTSC (Analog) TV signal (not HDTV signal) interference from electrical appliances, automobiles, motorcycles or fluorescent lights.

Try moving the unit to another location to see if this is the cause of the problem.

Sound

No sound, distorted sound or incorrect audio sound is heard when using the HDMI-DVI connections.

Make sure that the analog audio signals from the HDMI-DVI device are connected to the analog audio input L/R jacks.

Sound poor, picture OK

Check if the audio cable is connected into the unit correctly.

You switch to a different input and the volume changes.

This unit will memorize the volume level from the last time you adjusted it.

If the volume of the sound from another device is higher or lower, then the loudness will change.

Child and rating lock

Forgotten PIN code.

Enter “07 1 1” to clear your password.

Screen

You switch to a different input and the screen size changes.

This unit will memorize the viewing mode from the last time you used those particular input modes.

The display image does not cover the entire screen.

If you are using the unit as a PC monitor, make sure that Horizontal position and Vertical position in PC settings are set correctly.

If you are watching TV or using the Composite video, Component video or HDMI with 480i input, press repeatedly to switch to various screen modes.

Closed captions

Closed captions are displayed as a white box. No closed captions are displayed in the closed captions-supported program.

Interference from buildings or weather conditions may cause closed captions to be incomplete if watching analog TV signals.

Broadcasting station may shorten the program to insert advertisements.

The closed captions decoder cannot read the information of a shortened program.

Closed captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to insure that the closed captions remain up-to date with the current TV screen dialog.

Black box is displayed on the TV screen.

The text mode is selected. For closed captions, select CC-1, CC-2, CC-3 or CC-4.

Network

Cannot connect to the network.

Check if the Ethernet cable connection is properly made. Turn on the broadband router and/or modem.

Check the network settings.

Check if the broadband router and/or modem is correctly connected.

Note(s)



The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on correct operations.

For additional troubleshooting, refer to the Frequently Asked Questions or FAQs on www.philips.com/support.

FORMAT



Page 17

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

6 Specifications

Picture Type UHD (Ultra HD) (3840 x 2160 pixels 60Hz) Diagonal screen size / Aspect ratio 43”/ 16:9 Viewing angles 178° (V) by 178° (H) Built-in digital / analog tuner ATSC (digital) / NTSC (analog)

Sound Mono / Stereo Mono, Stereo, Sonic Emotion Premium Power output (RMS watts) 8W x 2 Equalizer 5 band

Ease of use

Picture format

Photo slide show JPEG, Progressive JPEG Music playback MP3, WAV, AAC Video playback MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC

Channel

Channel coverage

CATV (Analog NTSC)

Tuning system Channel frequency synthesized tuning system

Channel access

Connectivity

Component video input (Y/Pb/Pr)

Composite video input (Shared Y green terminal with component video)

HDMI input

Analog audio L/R input 1 (L audio / R audio) PC input Via HDMI and HDMI-DVI + Analog audio L/R USB 1 Wireless LAN Supporting wireless standards : IEEE 802.1 1a/b/g/n/ac (2.4GHz/5GHz) Ethernet port 1

Digital audio output

Headphone output

Power Power requirements 120Va+/– 10%, 60Hz +/– 0.5%

Temperature Operating temperature 41 °F (5 °C) to 104 °F (40 °C)

Specifications are subject to change without prior notice.

Model # 43PFL5703 / 43PFL5603

SD (4:3 source) HD (16:9 source) Automatic / 4:3 / Wide screen / Full / Unscaled / Manual Zoom UHD Full / Unscaled / Manual Zoom

Over-the-Air DTV (ATSC)

Over-the-Air Analog (NTSC)

Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen / Manual Zoom

VHF: 2ӳ13 UHF: 14ӳ69 (Each channel may have e.g. 2.1ӳ2.9, 3.1ӳ3.9, etc)

VHF: 2ӳ13 UHF: 14ӳ69

2ӳ13, AӳW W+1ӳW+94 (Analog W+1ӳW+84), A-5ӳA-1, 5A

Direct access number keyboard, Programmable scan, Channel + (up) / - (down) and PREV. CH (Previous channel)

1 Supporting video signals : 480i/p, 720p, 1080i/p @60Hz

3 (selectable HDMI modes) Supporting HDMI video signals : 480i/p, 720p, 1080i @60Hz, 1080p, 2160p @24/30/60Hz Supporting HDMI digital audio signals : LPCM, AC3, DD+ Supporting PC-input video signal up to 4096 x 2160

1 Supporting Dolby Audio (Dolby Digital and Dolby Digital Plus)

1 1/8 inch (3.5mm)

License

P&F USA, Inc. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source code packages, on an “AS IS” basis, used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after the product purchase to anyone in receipt of this information. To obtain source code, please contact P&F USA, Inc. You should write to Funai Service Corporation OSS Request, 1880 Braselton Hwy, Suite 118 #5012 Lawrenceville, GA 30043. P&F USA, Inc. disclaims any and all warranties and representations with respect to such software and related source code including quality, reliability, usability, and accuracy, and further disclaim all express, implied, statutory or otherwise, including without limitation, any implied warranties of title, noninfringement, merchantability, or fitness for a particular purpose. P&F USA, Inc. shall not be liable to make any corrections to the open source software or source code or to provide any support or assistance with respect to it. P&F USA, Inc. disclaims any and all liability arising out of or in connection with the use of this software and/or source code.

English

Page 18

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

7 Warranty

LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

This warranty obligation is limited to the terms as set forth below.

WHO IS COVERED:

This product warranty is issued to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

This warranty covers new products if a defect in material or workmanship occurs and a valid claim is received within the warranty period. At its option, the company will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in current inventory, or (3) refund the original purchase price of the product. Replacement products or parts provided under this warranty are covered against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes company property. When a refund is given, your product becomes company property. Note: Any product sold and identied as refurbished or renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:

This limited warranty applies only to new company manufactured products that can be identied by the trademark, trade name, or logo axed to it. This limited warranty does not apply to any hardware product or any software, even if packaged or sold with the product, as manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

The company is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or other additional product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this limited warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-supplied product, (b) to damage caused by service performed by anyone other than company approved Authorized Service Location, (c) to a product or a part that has been modied without written company permission, or (d) if any serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished product sold “AS IS” by some retailers.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Funai Service Corporation Support, 1880 Braselton Hwy, Suite 118 #5012, Lawrenceville, GA 30043

This limited warranty does not cover:

• Shipping charges to return defective product.

• Labor charges for installation or setup of the product, adjustment

of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing xed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of the company.

• Damage or claims for products not being available for use, or for lost data or lost software.

• Damage from mishandled shipments or transit accidents when returning product.

• A product that requires modication or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modications.

• A product used for commercial or institutional purposes (including but not limited to rental purposes).

• Product lost in shipment and no signature verication receipt can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE… Contact the Customer Care Center at: 1-866-202-5960

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

Page 19

To obtain a more detailed electronic copy of this User manual or to access live chat support, go to www.philips.com/support

English

Page 20

Model Number(s):

43PFL5703/F7, 43PFL5603/F7

To obtain assistance, please contact

customer care at:

1 866 202 5960

P&F USA, Inc. 1880 Braselton Hwy, Suite 118 #5012 Lawrenceville, GA 30043 U.S.A.

P&F Mexicana, S.A. de C.V. Av. La Palma No. 6, Col. San Fernando La Herradura. Huixquilucan, Edo. de México. C.P. 52787

This product has been manufactured by and is sold under the responsibility of P&F USA, Inc., and P&F USA, Inc. is the warrantor in relation to this product.

The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.

Printed in Thailand AB7VCUT-43UL / AB7VBUT-43UL / AB7VAUT-43UL / AB7V0UT-43UL 2EMN00773

䖩䖩䖩䖩䖩