Philips 32PHT4509-12, 40PFT4509-12, 42PFT6309-12, 47PFT6309-12, 50PFT4509-12 Instruction manual

...

www.philips.com/welcome

User Manual

1 My new TV 4

1.1 Smart TV 4

1.2 App gallery 4

1.3 Rental videos 4

1.4 Social networks 4

1.5 Ambilight+hue 4

1.6 Skype 5

1.7 Smartphones and tablets 5

1.8 Pause TV and recordings 5

1.9 Gaming 5

1.10 EasyLink 6

2 Setting up 7

2.1 Read safety 7

2.2 TV stand and wall mounting 7

2.3 Tips on placement 7

2.4 Power cable 7

2.5 Antenna cable 8

2.6 Satellite dish 8

3 Network 9

3.1 Wireless network 9

3.2 Wired network 10

3.3 Network settings 10

4 Connections 12

4.1 Tips on connections 12

4.2 EasyLink HDMI CEC 13

4.3 Common interface - CAM 14

4.4 Set-top box - STB 15

4.5 Satellite receiver 15

4.6 Home Theatre System - HTS 15

4.7 Blu-ray Disc player 17

4.8 DVD player 17

4.9 Game console 17

4.10 USB Hard Drive 18

4.11 USB keyboard or mouse 19

4.12 USB flash drive 20

4.13 Photo camera 20

4.14 Camcorder 20

4.15 Computer 21

4.16 Headphones 21

5 Switch on 23

5.1 On or Standby 23

5.2 Keys on TV 23

5.3 Word mark brightness 23

6 Remote control 24

6.1 Key overview for 5500, 5610, 5700, 6100, 6200, 6400, 6700, 6800 series 24

6.2 IR sensor for non-RF remote control 25

6.3 Batteries 25

6.4 Cleaning 25

7 TV channels 26

7.1 Watching TV channels 26

7.2 Channel installation 31

8 Satellite channels 35

8.1 Satellite channels 35

8.2 Watching satellite channels 35

8.3 Satellite channel list 35

8.4 Favourite satellite channels 35

8.5 Lock satellite channels 36

8.6 Satellite installation 37

8.7 Problems with satellites 40

9 Home menu 42 10 TV guide 43

10.1 What you need 43

10.2 Using the TV guide 43

10.3 Recordings 43

11 Sources 44

11.1 Sources list 44

11.2 From standby 44

11.3 EasyLink 44

12 Timers and clock 45

12.1 Sleeptimer 45

12.2 Clock 45

12.3 Switch off timer 45

13 3D 46

13.1 3D 46

13.2 What you need 46

13.3 The 3D glasses 46

13.4 Care of the 3D glasses 47

13.5 Watch 3D 47

13.6 Optimal 3D viewing 48

13.7 Health warning 48

14 Games 49

14.1 Play a game 49

14.2 Two-player games 49

15 Your photos, videos and music 51

15.1 From a USB connection or network computer 51

15.2 Wi-Fi Miracast 52

16 Pause TV 54 17 Recording 55

17.1 What you need 55

17.2 Record a programme 55

17.3 Watch a recording 55

18 Skype 57

18.1 About Skype 57

18.2 What you need 57

18.3 Start with Skype 57

18.4 Skype menu 58

18.5 My profile 58

18.6 People 59

18.7 Calling on Skype 60

18.8 Skype credit 61

18.9 Skype settings 61

18.10 Sign out 63

18.11 Quit Skype 63

18.12 Terms of use & Privacy Policy 63

19 Smart TV 64

19.1 About Smart TV 64

19.2 What you need 64

19.3 Setup Smart TV 64

19.4 Smart TV Apps 64

19.5 Reset Smart TV 66

20 Multi room 67

20.1 About Multi room 67

20.2 What you need 67

20.3 Using Multi room 67

21 MyRemote App 69

21.1 About MyRemote App 69

21.2 What you need 69

21.3 App download 70

21.4 App menu 70

21.5 App functions 70

22 Settings 73

22.1 Setup menu 73

22.2 Picture 74

22.3 Sound 77

22.4 Ambilight 79

22.5 Universal access 81

23 Specifications 83

23.1 Environmental 83

23.2 Reception for non-satellite TVs 83

23.3 Reception for satellite TVs 84

23.4 Display 84

23.5 Power 84

23.6 Dimensions and weights (6300 series) 84

23.7 Dimensions and weights (6100 series) 85

23.8 Dimensions and weights (5700 series) 85

23.9 Dimensions and weights (5600 series) 85

23.10 Dimensions and weights (5500 series) 85

23.11 Dimensions and weights (4500 series) 86

23.12 Connectivity for two side connector 86

23.13 Multimedia 86

24 Software 88

24.1 Software update 88

24.2 Software version 88

24.3 Open source software 88

24.4 Open source license 88

25 Troubleshooting and support 94

25.1 Troubleshooting 94

25.2 Register 95

25.3 Help 95

25.4 Online help 95

25.5 Consumer Care / Repair 96

26 Safety and care 97

26.1 Safety 97

26.2 Screen care 98

27 Terms of use, copyrights and licenses 99

27.1 Terms of use 99

27.2 Copyrights and licenses 99

Index 102

Start Smart TV and add the video store App to the Smart TV start page.

My new TV

1.1

Smart TV

Connect this a new world of television. You can make a wired connection to your router or you can link up wirelessly with Wi-Fi.

With the TV connected to your home network, a smartphone can show a photo on TV, you can play videos stored on your computer or control the TV with your tablet.

With your TV connected to the Internet, you can watch a rental video from an online video store, read the online TV guide or record your favourite TV show on a USB Hard Drive.

The Smart TV Apps add to the fun with all sorts of entertainment and convenient services.

Help

information.

1.2

Philips Smart LED TV

, press 

Keywords

to the Internet and discover

and look up

Smart TV

for more

Open the video store App, create your personal account, select the movie and press play. No fuss with downloading, you can watch the movie immediately*.

, press 

Help

more information. * Depending on the video streaming service of the selected

video store.

1.4

Keywords

and look up

Rental videos

for

Social networks

No need to get up to check your friend's messages on your computer. Open Smart TV, select your message back from your couch.

social network

page and send a

App gallery

Open the collection of tailored websites for TV.

Find the App for YouTube videos, a national newspaper, an online photo album, Facebook, Twitter, etc.

There are Apps to rent a video from an online video store and Apps for watching programmes you missed.

If the App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV.

Help

information.

1.3

App gallery

, press 

in Smart TV to browse the Apps, the

Keywords

and look up

App gallery

for more

Rental videos

To watch a Simply rent the latest movie from your regional online video store.

rental video

, you don't need to leave your home.

Smart TV supports the popular social networks Facebook and Twitter.

In information.

1.5

Help

, press 

Keywords

and look up

App gallery

for more

Ambilight+hue

With

Ambilight+hue

follow the Ambilight colours of the TV. The Philips hue lamps will expand the Ambilight effect across the

room. If you don’t have any Philips hue lamps yet, buy the

Philips hue Starter Kit

and install the bulbs and bridge. You can buy extra Philips hue bulbs separately.

, you can set up your

(includes a hue bridge and 3 hue bulbs)

Philips hue

lamps to

• Only for TVs with Ambilight.

1.6

Skype

from your computer to your TV. And with MyRemote app on a tablet, you can call up the TV guide, read about the programmes and switch the TV to a channel with a simple tap of your finger. The MyRemote app is available for iOS and Android.

, press 

Help

more information.

1.8

Keywords

and look up

MyRemote app

for

Pause TV and recordings

If you connect a broadcast from a digital TV channel.

USB Hard Drive

, you can pause and record a

With

Skype™

You can call and see your friends from anywhere in the world. To make a video call, you need a camera with a built-in microphone and a good connection to the Internet. Some Philips TVs have a camera and microphone built in.

Help

information.

1.7

you can make video calls on your TV for free.

, press 

Keywords

and look up

Skype

for more

Smartphones and tablets

To use your smartphone or tablet as a TV remote control or as your media controller, download the from your smartphone or tablet app store.

Philips MyRemote

app

Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later. With a USB Hard Drive connected, you can also record digital broadcasts. You can record while you are watching a programme or schedule a recording of an upcoming programme.

, press 

Help

Recording

1.9

Keywords

for more information.

and look up

Pause TV

Gaming

If you select your game console in the Home menu, the TV switches to the settings ideal for gaming automatically.

If you play a multi-player game with split screens, you can set the TV to show each screen as a full screen simultaneously. Each player can focus on his own game to play.

Operate your TV from your smartphone or tablet, switch channels or change the volume. With the MyRemote app, you can use your phone or tablet to send photos, music or videos

The TV uses 3D technology to show both screens. To play a two-player game with two different full screen pictures, you need a pair of 3D glasses for each player.

Two player games

1.10

Help

, press 

EasyLink

Keywords

for more information.

and look up

Game console or

With

EasyLink

Disc player, with the remote control of the TV. EasyLink uses HDMI CEC to communicate with the connected

devices.

Help

information.

you can operate a connected device, like a Bluray

, press 

Keywords

and look up

EasyLink

for more

Setting up

2.1

Read safety

Read the safety instructions first before you use the TV. In Help, go to

2.2

Safety and care

TV stand and wall mounting

TV stand

You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.

Use the product type number of the TV to look for the Quick Start Guide to download.

Wall mounting

Safety

VESA MIS-F 400x200, M6

• For 56X9 series 55-inch TV VESA MIS-F 400x400, M6

• For 56X9 series 47-inch TV VESA MIS-F 400x200, M6

• For 56X9 series 42-inch VESA MIS-F 200x200, M6

• For 5619 series 24-inch TV VESA MIS-F 75x75, M4

• For 5500 series 55-inch TV VESA MIS-F 400x400, M6 For 5500 series 32-inch/40-inch/48-inch TV VESA MIS-F 400x200, M6 For 4500 series 50-inch TV VESA MIS-F 400x200, M6 For 4500 series 40-inch TV VESA MIS-F 200x200, M6 For 4500 series 32-inch TV VESA MIS-F 100x100, M6

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .

To fix the bracket securely, use screws with a length indicated in the drawing.

• For 6569 series 55-inch TV VESA MIS-F 400x400, M6

• For 6549/6559/6569 series 32-inch/42-inch/47-inch TV VESA MIS-F 400x200, M6

• For 6309 series 47-inch/55-inch TV VESA MIS-F 400x400, M6

• For 6309 series 42-inch TV VESA MIS-F 200x200, M6

• For 6109 series 55-inch TV VESA MIS-F 400x400, M6

• For 6109 series 42-inch/47-inch TV

2.3

Tips on placement

• Position the TV where light does not shine directly on the screen.

• Dim lighting conditions in the room for best Ambilight effect.*

• Position the TV up to 15 cm away from the wall.

• The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.

* Ambilight function is only for TVs with Ambilight.

2.4

Power cable

• Insert the power cable into the back of the TV.

• Make sure the power cable is securely inserted in the

POWER

connector on the

connector.

• Make sure that the power plug, in the wall socket, is accessible at all times.

• When you unplug the power cable, always pull the plug, never pull the cable.

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

, press 

Help

information on switching the TV on or off.

Keywords

and look up Switching on for more

2.5

Antenna cable

Insert the antenna plug firmly into the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

ANTENNA

socket at the

2.6

Satellite dish

Attach the satellite F-type connector to the satellite connection

at the back of the TV.

SAT

• Only for TVs with a built-in satellite tuner.

Network

3.1

Wireless network

What you need

To connect the TV wirelessly to the Internet, you need a wireless router. Use a high-speed (broadband) connection to the Internet.

Network devices

The TV can connect to other devices in your wireless network, like your computer or smartphone. You can use a computer with Microsoft Windows or Apple OS X.

File sharing

On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*, Windows Media Player 11, Twonky™ or similar.

Install the media server software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from the Philips support site www.philips.com/support

Make the connection

Follow steps 1 to 5.

- Make sure that the router of your wireless network is

Step 1

switched on.

- Press and select

Step 2

- Select

Step 3

- Select

Step 4

- Select

Step 5

- Select

Step 6

have a router with WPS (Wi-Fi Protected Setup), you can select

. Select your choice and press OK.

WPS

Connect to network

Connect

Wireless Scan

and press OK.

to scan for your wireless network. If you

and press OK.

Setup

and press OK.

•

Scan

Select router). The TV might find several wireless networks in your proximity.

•

WPS

If your router has WPS, you can directly connect to the router without scanning. Go to the router, press the WPS button and return to the TV within 2 minutes. Then press the connection. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. If you must use the instead of WPS.

Step 7

network and press OK. If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select

Step 8

your encryption key (WEP, WPA or WPA2). If you entered the encryption key for this network before, you can select make the connection immediately. If your router supports WPS or WPS PIN, you select

WPS PIN

•

Standard

Select passphrase or security key) manually.You can use the keyboard on the RC to enter the encryption key. Once you have entered the key, press

•

WPS PIN

To make a secured WPS connection with a PIN code, select

WPS PIN

shown and enter it in the router software on your PC. Return to the TV and press to enter the PIN code in the router software.

Step 9

successful.

Network configuration

If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On. Alternatively, if you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. To set the TV to Static IP, press and select

OK configuration

you can set the IP address and other necessary settings in

IP configuration

to scan for your wireless network (your wireless

Scan

Connect

WPS PIN code

- In the list of networks found, select your wireless

Manual entry

- Depending on the type of router, you can now enter

Standard

and press OK. Write down the 8-digit PIN code

- A message will be shown when the connection is

to enter the network name yourself.

Standard

Connect

. Select your choice and press OK.

to enter the encryption key (password,

Connect

. Consult the router manual on where

to connect, select

Scan

WPS

and press

Setup

. Select

Network settings

Static IP

in the same menu.

Network settings

. With Static IP selected in the menu,

Network

to make

Static

Network problems

Connect the router

Wireless network not found or distorted

• Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n devices in your proximity might disturb the wireless network.

• Make sure that the firewalls in your network allow access to the TV's wireless connection.

• If the wireless network does not work properly in your home, try the wired network installation.

Internet does not work

• If the connection to the router is OK, check the router connection to the Internet.

The PC and Internet connection are slow

• Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.

• Use a high-speed (broadband) Internet connection for your router.

3.2

Wired network

What you need

To connect and setup the router follow steps 1 to 5. 1 - Connect the router to the TV with a network cable

(Ethernet cable**).

2 - Make sure that the router is switched on. 3 - Press and select 4 - Select 5 - Select

The TV constantly searches for the network connection. A message will be shown when the connection is successful.

Network configuration

If the connection fails, you can check the DHCP setting of the router. DHCP should be set to On. Alternatively, if you are an advanced user and want to install your network with static IP addressing, set the TV to Static IP. To set the TV to Static IP, press and select press OK. Select

configuration

you can set the IP address and other necessary settings in

IP configuration

**To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable.

Connect to network

and press OK.

Wired

Network settings

Static IP

in the same menu.

and press OK.

Setup

and press OK.

and

Setup

Network settings

. With Static IP selected in the menu,

Network

Static

You need a network Use a router with a high-speed (broadband) connection to the Internet.

File sharing

On this TV, you can open photos, music and videos stored on your computer. Use a recent version of media server software like Philips MediaManager*, Windows Media Player 11, Twonky™ or similar. Install the media server software on your computer and set it up to share your media files with the TV. Read the manual of the media server software for more information. This software must be running on your computer to view or play your files on TV. * You can download the Philips MediaManager software from the Philips support site www.philips.com/support

Help

software, supported

software.

, press



Keywords

to connect the TV to the Internet.

router

and look up

for an overview of supported media server

Media server

3.3

Network settings

To open the Network settings . . .

1 - Press and select 2 - Select

•

View network settings

All current network settings are shown here. The IP and MAC address, signal strength, speed, encryption method, etc.

•

Network settings

- Network type

Sets the network to Wired or Wireless.

- Network configuration

Sets the network configuration to DHCP or Static IP.

•

Wi-Fi media playback

To receive multimedia files from smartphones or tablets, set the DMR to On.

•

Static IP configuration

If Static IP is selected in Network Settings menu, you can set all necessary static IP settings here.

•

Wi-Fi Miracast

Network settings

and press OK.

Setup

and press OK.

For more information on Wi-Fi Miracast, press



Keywords

•

Reset Wi-Fi direct group

and look up

Wi-Fi Miracast™

Clear the list of connected and blocked devices that are used with Miracast.

•

Wi-Fi smart screen

For more information on Wi-Fi smart screen, press



Keywords

screen

•

MyRemote recording

and look up

MyRemote App, Wi-Fi smart

Manage TV recordings remotely with a smartphone or tablet..

•

TV network name

If you have more than one TV in your network, you can rename the TVs here.

•

Netflix Settings

Adjust Netflix settings.

•

Clear Internet memory

With Clear Internet memory, you can clear all Internet files stored on your TV. You clear your Philips Smart TV registration and parental rating settings, your video store app logins, all Smart TV app favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.

Connections

4.1

Tips on connections

If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device. For more information on using EasyLink, press and look up

EasyLink CEC



Keywords

Connectivity guide

Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.

If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.

Go to

www.connectivityguide.philips.com

Antenna

If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.

DVI to HDMI

Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to AUDIO IN for sound, on the back of the TV.

Copy protection

DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).

HDMI ARC

All of the HDMI connections on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theatre Sysytem (HTS), also has the HDMI ARC connection, connect it to any of the HDMI connections on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals. You can use any HDMI connection on this TV to connect the HTS but ARC is only available for 1 device/connection at a time.

HDMI

HDMI CEC

An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) or Ultra HD (UHD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.

EasyLink HDMI CEC

In case you prefer to switch off ARC on the HDMI connections, press and select Select

TV settings

Setup

Sound

and press OK.

Advanced

HDMI ARC

Y Pb Pr - Audio L R

Y Pb Pr - Component Video is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right signals for sound.

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

• Only for TVs with component connectors.

CVBS - Audio L R

CVBS - Composite Video is a high quality connection. The CVBS connection can be used for High Definition (HD) TV signals. Next to the CVBS signal adds the Audio Left and Right signals for sound.

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

Audio Out - Optical

Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.

You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System. For more information, press

Out settings



Keywords

and look up

Audio

• Only for TVs with component/composite connectors.

Scart

SCART is a good quality connection. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals.

Use the SCART adapter cable to connect your device.

If the sound does not match the video on screen, you can adjust the audio to video synchronisation. For more information, press

to video sync

4.2



Keywords

and look up

Audio

EasyLink HDMI CEC

EasyLink

With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.

EasyLink setup

The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre

Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.

Example HDMI CEC branding names are property of their respective owners.

caused by interference with the TV processing, the picture processing of these devices should be disabled. The TV comes with Pixel Plus Link switched on and disables the picture quality processing of recent Philips devices connected to the TV. To switch off Pixel Plus Link, in the EasyLink settings menu, select

Pixel Plus Link

and select

Off

Operate devices

To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press an HDMI connection and press OK.

Once the device is selected, the TV remote control can control the device. However and  other TV keys are not forwarded to the device. If the key you need is not on the TV remote control, you can select the key in the Options menu. Press  the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu.

Note: Only devices that support function will respond to the TV remote control.

OPTIONS



SOURCES

and select

, select a device connected to

OPTIONS

Controls

EasyLink remote control

keys and some

in the menu bar. On

EasyLink settings

The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently.

EasyLink

To switch off EasyLink completely . . .

1 - Press and select 2 - Select

OK.

3 - Select 4 - Press , repeatedly if necessary, to close the menu.

EasyLink Remote Control

TV settings

and press OK.

Off

and press OK.

Setup

General settings

EasyLink, and press

Auto subtitle shift

If you play a DVD or Blu-ray Disc on a Philips disc player that supports subtitles, the TV can move the subtitles upwards. Subtitles will be visible whatever Picture format you select. The TV comes with Auto subtitle shift switched on. To switch off Auto subtitle shift, in the EasyLink settings menu, select

Auto subtitle shift

Auto switch off devices

You can set the TV to switch off the connecting HDMI-CEC compliant devices if they are not the active source. The TV switches the connected device to standby after 10 minutes of inactivity.

4.3

and select

Off

Common interface - CAM

CI+

This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes, like movies

and sports, offered by digital TV broadcasters in your region. These programmes are scrambled by the TV broadcaster and descrambled with a prepaid CI+ module. Digital TV broadcasters provide this CI+ module (Conditional Access Module - CAM) when you subscribe to their premium programmes. These programmes have a high level of copy protection.

Contact a digital TV broadcaster for more information on terms & conditions.

For more information on connecting a CAM module, press



Keywords

and look up

Common Interface CAM

If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. In the EasyLink settings menu, select and select

Pixel Plus Link

Some devices, a DVD or Blu-ray Disc player, might have their own picture quality processing. To avoid bad picture quality

Off

EasyLink remote control

CAM

Insert a CAM module

Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.

Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.

Use the Common Interface slot on the TV to insert the CAM card. With the front of the card facing towards you, gently insert the CAM as far as it will go. Leave the card in the slot permanently.

It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV. If a CAM is inserted and subscription fees are paid, (connection methods can differ), you can watch the TV broadcast. The inserted CAM is exclusively for your TV.

CAM settings

To set passwords or PIN codes for the CAM TV broadcast, press and select Select Select the CAM TV broadcaster and press OK.

4.4

Setup

Channel settings

and press OK.

Common Interface

Set-top box - STB

Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV.

To switch off the Switch off timer, press and select press OK. Select

TV settings

set the slider bar to

4.5

General settings

Off

Switch off timer

Setup

and

Satellite receiver

• Only for TVs with a built-in satellite tuner. Connect the dish antenna cable to the Satellite receiver.

Next to the antenna connection, add an HDMI cable to connect the device to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection.

Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV. Alternatively, you can use a SCART cable if the Set-top box has no HDMI connection.

Switch off timer

To switch off the Switch off timer, press and select press OK. Select

TV settings

set the slider bar to

General settings

Off

Switch off timer

Setup

and

4.6

Home Theatre System - HTS

Audio Out settings

Audio Out delay

Connect HTS

Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection.

HDMI ARC

If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you have connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.

With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised.

Automatic audio to video sync

With recent Philips Home Theatre Systems, the audio to video sync is done automatically synchronised and always correct.

Audio sync delay

For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to the video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio out delay on the TV.

To switch off the Audio Out delay . . .

1 - Press and select 2 - Select 3 - Select 4 - Press , repeatedly if necessary, to close the menu.

TV settings

and press OK.

Off

Setup

and press OK.

Sound

Advanced

Audio out delay

If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System.

Audio to video synchronisation (sync)

If the sound does not match the video on screen, you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video.

For more information, press

to video sync



Keywords

and look up

Audio

Audio Out offset

If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 5ms. Maximum setting is -60ms. The Audio Out delay setting should be switched on.

To synchronise the sound on the TV . . .

1 - Press and select 2 - Select 3 - Use the slider bar to set the sound offset and press OK. 4 - Press , repeatedly if necessary, to close the menu.

Audio Out format

If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.

To set the Audio out format . . .

TV settings

Setup

Sound

and press OK.

Advanced

Audio out offset

1 - Press and select 2 - Select

TV settings

Setup

Sound

and press OK.

Advanced

Audio out

format

3 - Select 4 - Press , repeatedly if necessary, to close the menu.

Audio Out levelling

Use the Audio Out levelling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing.

To level the difference in volume . . .

1 - Press and select 2 - Select

levelling

3 - If the volume difference is large, select difference is small, select 4 - Press , repeatedly if necessary, to close the menu.

Audio Out levelling affects both the Audio Out - Optical and HDMI ARC sound signals.

Multichannel

TV settings

Setup

Stereo

Sound

Less

and press OK.

Advanced

Audio out

. If the volume

Problems with HTS sound

If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.

For more information on EasyLink, press up

EasyLink HDMI CEC

4.8



Keywords

and look

DVD player

Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.

Setup

Stereo

TV settings

setting on the TV is switched On.

TV settings

Sound

HDMI ARC

Audio

Advanced

Sound with loud noise

If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theatre System has no DTS sound processing. You can fix this by setting the

out format

Press and select

Audio out format

No sound

If you cannot hear the sound from the TV on your Home Theatre System, check the following . . .

• Check if you connected the HDMI cable to an connection on the Home Theatre System. All HDMI connections on the TV are HDMI ARC connections.

• Check if the Press and select

HDMI ARC

4.7

of the TV to

HDMI ARC

Blu-ray Disc player

If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control.

For more information on EasyLink, press look up

4.9

EasyLink HDMI CEC



Keywords

and

Game console

HDMI

For best quality, connect the game console with an High speed HDMI cable to the TV

Use a

High speed HDMI

player to the TV.

cable to connect the Blu-ray Disc

Y Pb Pr - Audio L R

CVBS - Audio L R

Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV.

Connect the game console with a component video cable (Y Pb Pr) and an audio L/R cable to the TV.

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

CVBS - Audio L R / Scart

Connect the game console to the TV with a composite cable (CVBS) and an audio L/R cable to the TV.

If your game console only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

4.10

USB Hard Drive

What you need

If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).

To pause

To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 32GB disk space.

To record

To pause and record a broadcast, you need a minimum of 250GB disk space.

Note: the CVBS to SCART Adapter is not provided in the TV set.

TV guide

Before you decide to buy a USB Hard Drive to record, you can check if it is possible to record digital TV channels in your country. Press button on the TV guide page, you can record.

For more information on how to install a USB Hard Drive, press





TV GUIDE

Keywords

on the remote control. If there is a Record

and look up

USB Hard Drive, installation

Installation

Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. If you want to record a broadcast with TV guide data from the Internet, you need to have the Internet connection installed on your TV before you install the USB Hard Drive. Formatting removes all files from the USB Hard Drive.

1 - Connect the USB Hard Drive to one of the connections on the TV. Do not connect another USB device to the other USB ports when formatting.

2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel, press

(Pause). Trying to pause will start the formatting. Follow the instructions on screen. When the USB Hard Drive is formatted, leave it connected

permanently.

Recording



Keywords

Warning

The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.

For more information, press

USB

and look up



Pause

Install the keyboard

To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. If you select a Cyrillic or Greek keyboard lay-out first, you can select a secondary Latin keyboard lay-out.

To change the keyboard lay-out setting when a lay-out was selected…

1 - Press and select 2 - Select

settings Keys for channel renaming

• Enter key = OK

• Backspace = delete character before cursor

• Arrow keys = navigate within a text field

• To switch between keyboard lay-outs, if a secondary lay-out is set, press the

Keys for Smart TV Apps and Internet pages

• Shift + Tab = Next and Previous

• Home = scroll to the top of the page

• End = scroll to the bottom of the page

• Page Up = jump one page up

• Page Down = jump one page down

• + = zoom in one step

• - = zoom out one step

• * = fit the web page to the screen width.

TV settings

and press OK.

Setup

Ctrl + Shift

connections on the TV. When

USB

and press OK.

General settings

keys simultaneously.

USB keyboard

USB mouse

Connect USB mouse

You can connect a USB mouse (USB-HID type) to navigate pages on the Internet.

4.11

USB keyboard or mouse

USB keyboard

Connect a USB keyboard (USB-HID type) to enter text on your TV.

You can connect a keyboard and a mouse to the TV. Use one of the

connections to connect.

USB

On an Internet page, you can select and click on links more easily.

Back



Connect the mouse

Switch the TV on and connect the USB mouse to one of the

connections on the TV. You can also connect the USB

USB

mouse to a connected USB keyboard.

Mouse clicks

• Left click =

• Right click =

You can use the scroll wheel to scroll pages up and down. For more information on how to connect a keyboard,

press



Keywords

Mouse speed

You can adjust the speed of the mouse moving on screen.

and look up

USB keyboard

To adjust the speed . . .

1 - Press and select 2 - Select 3 - Select

press OK. 4 - Press the arrows  (up) or  (down) to increase or lower the speed.

5 - Press OK to store and close the setting. 6 - Press , repeatedly if necessary, to close the menu.

4.12

TV settings General settings

and press OK.

Setup

and press OK.

Pointer / Mouse settings

and

USB flash drive

You can view photos or play your music and videos from a connected USB flash drive.

Insert a USB flash drive in one of the TV while the TV is switched on.

connections on the

USB

If the contents list does not appear automatically, press

SOURCE

Your camera might need to be set to transfer its content with PTP (Picture Transfer Protocol). Read the user manual of the digital photo camera.

For more information on viewing photos, press

Keywords

Ultra HD on USB

You can view photos in Ultra HD resolution from a connected USB device or flash drive. The TV will downscale the resolution to Ultra HD if the resolution of the photo is higher. You cannot play a native Ultra HD video on any of the USB connections.

4.14

, select

and look up

and press OK.

USB

Your photos, videos and music





Camcorder

HDMI

The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press

SOURCE

To stop watching the USB flash drive content, press select another activity. To disconnect the USB flash drive, you can pull out the flash drive anytime.

For more information on watching or playing content from a USB flash drive, press

videos and music

4.13

, select

and press OK.

USB



Keywords

and look up





EXIT

Your photos,

Photo camera

To view photos stored on your digital photo camera, you can connect the camera directly to the TV.

Use one of the on the camera after you made the connection.

connections on the TV to connect. Switch

USB

For best quality, use an HDMI cable to connect the camcorder to the TV.

CVBS - Audio L R / Scart

You can use an HDMI, YPbPr or SCART connection to connect your camcorder. If your camcorder only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection.

Note: the CVBS to Scart Adaptor is not provided in the TV set.

CVBS - Audio L R

Use a Video Audio L/R cable to connect the camcorder to the TV.

the PC to HDMI and an audio L/R cable (mini-jack 3.5mm) to AUDIO IN L/R on the back of the TV.

Settings

• Y shares the same jack with CVBS.

• Component and Composite share audio jacks.

4.15

Computer

Connect

You can connect your computer to the TV and use the TV as a PC monitor.

With HDMI

Use an HDMI cable to connect the computer to the TV.

Ideal monitor setting

If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically.

If you use your computer to watch movies or use it to play games, you might want to set the TV back to the ideal TV watching or gaming setting.

To set the TV to the ideal setting manually . . .

1 - Press and select 2 - Select

style

3 - Select a movie) and press OK. 4 - Press , repeatedly if necessary, to close the menu.

Remember to set the Game or computer setting back to

4.16

TV settings

and press OK.

Game

Computer

when you stop playing the game.

and press

Setup

(for gaming) or select

Picture

Advanced

OK.

Computer

Activity

(for watching

Headphones

With DVI to HDMI

Alternatively, you can use a DVI to HDMI adapter to connect

You can connect a set of headphones to the  connection on the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.

To adjust the volume . . .

1 - Press and select 2 - Select

press OK.

3 - Press  (up) or  (down) to adjust the volume. 4 - Press , repeatedly if necessay, to close the menu.

TV settings > Sound

Setup

and press

OK.

Headphones volume

and

Switch on

5.1

On or Standby

Make sure you plugged in the mains power on the back of the TV before you switch on the TV. If the red indicator light is off, press the Joystick on the right side or on the back of the TV to put the TV in standby - the red indicator will light up.

• Press the Joystick to confirm a selection or setting.

5.3

Word mark brightness

You can switch off or adjust the word mark lighting. To adjust or switch off…

With the TV in standby, press  onon the remote control to switch the TV on.

Switch to standby

To switch the TV to standby, press  on the remote control.

Switch Off

To switch the TV Off, press the Joystick on the right or on the back. The red indicator light is off. The TV is still connected to the mains power but consumes a minimum of energy. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

1 - Press and select 2 - Select

brightness

3 - Select off the lighting of the word mark. 4 - Press , repeatedly if necessary, to close the menu.

• Only available for certain TV models

TV settings

and press OK.

Maximum, Medium, Minimum

and press OK.

Setup

General settings

Word mark

or select

to switch

Off

5.2

Keys on TV

While the on-screen display is on, press the Joystick to display the menu.

• Use the arrow/nevigation keys to nevigate up, down, left or right.

Remote control

6.1

Key overview for 5500, 5610, 5700, 6100, 6200, 6400, 6700, 6800 series

Middle

Top

- 

Standby

To switch the TV On or back to Standby.

Playback and record

• Play , to playback.

• Pause , to pause playback

• Stop , to stop playback

• Rewind , to rewind

• Fast forward , to go fast forward

• Record , to record now



Settings

To open the Settings menu.



TV GUIDE

To open or close the TV guide.



To open the Popular searches page.

keys



SMART TV

To open the Smart TV start page.

Colour keys

Follow on screen instructions. Blue key , opens Help.



INFO

To open or close programme info.



BACK

To switch back to the previous channel you selected. To close a menu without changing a setting. To go back to the previous Smart TV page.

HOME

To open or close the home menu.



EXIT

To switch back to watching TV.



OPTIONS

To open or close the Options menu.

- OK key

To confirm a selection or setting.

Arrow / navigation

To navigate up, down, left or right.



To open an extra small screen.

MULTIVIEW

keys



Picture format

To open or close the Picture format menu.



SOURCES

To open or close the Sources menu - the list of connected devices.



LIST

To open or close the channel list

Bottom



Volume

To adjust the volume level.

Number keys

To select a TV channel directly or to enter text.

and

text keypad

SUBTITLE

To switch subtitles on, off or Automatic.



Mute

To mute the sound or to restore it. 5 -



Channel

To switch to the next or previous channel in the channel list. To open the next or previous page in Text or start the next or previous chapter on a disc.

TEXT

To open or close Text / Teletext.

6.2

IR sensor for non-RF remote control

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

6.4

Cleaning

Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use

substances such as alcohol, chemicals or household cleaners on the remote control.

6.3

Batteries

1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2

type

AAA-LR03-1.5V

the - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks.

Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.

For more information, press

use

alkaline batteries. Make sure the + and



Keywords

and look up

End of

Channel list

TV channels

7.1

Watching TV channels

Switch channels

To watch TV channels, press . The TV tunes to the TV channel you last watched.

Alternatively, press to open the Home menu and select

Watch TV

To switch channels, press  + or  -. If you know the channel number, type in the number with the number keys. Press after you entered the number to switch channels.

To switch back to the previously tuned channel, press .

To switch to a channel from a channel list

While watching a TV channel, press channel lists.

and press OK.



to open the

LIST

Favourite channels

You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels.

Create your favourite channel list

1 - While watching a TV channel, press channel list.

2 - Select All to view all channels. 3 - Select the channel, and press  to mark as favourite. 4 - The selected channel is marked with a . 5 - To finish, press . The channels are added to the Favourites

list. To remove a channel from the favourites list, select the channel

with , then press  again to unmark as favourite.

Reorder

You can reorder — reposition — channels in the Favourite channel list.

1 - In the channel list to reposition.

2 - Press . 3 - Select the channel to reorder and press OK. 4 - Press the

channel to another location and press OK. 5 - Once complete, press  channel list.

You can highlight another channel and do the same.

Favourites

Navigation buttons



, highlight the channel you want

to move the highlighted

to exit from the Favourite

EXIT

to open the

LIST

The channel list can have several pages with channels. To view the next or previous page, press To close the channel lists without switching channels, press

LIST

again.



Radio channels

If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel.



Channel list views

In the channel lists, you can find all installed TV and radio channels.

Next to the channel list you can set up a list of installed channels in

Channel logos

In some countries, the TV can show the channel logos. If you do not want these logos to appear, you can switch them off. To switch off Channel logos . . .

1 - Press and select 2 - Select

press OK.

3 - Select 4 - Press , repeatedly if necessary, to close the menu.

stations separately or discover the newly added

Radio

New

TV settings

and press OK.

Off

, which holds all installed channels,

All

Favourites

Setup

General settings

, view the

and press OK.

Channel logos

and

Rename channels

You can rename channels in the channel list. 1 - Select the channel you want to rename in one of the channel

lists.

2 - Select the channel to rename. 3 - Press .

You can enter text with the remote control keyboard or open the on-screen keyboard.

With the on-screen keyboard

• To open the on-screen keyboard, place the cursor in the name text field and press OK.

• To delete the character in front of the cursor, press

Backspace

• To enter a character, select the character with the arrow keys and press OK.

• To select uppercase characters, press .

• To select numbers or special characters, press .

• When you are ready, press  to close the on-screen keyboard.

• To finish renaming, select

With the remote control keyboard*

• To delete a character, position the cursor behind the character and press .

• To enter a character, press the character on the keyboard.

• When you are ready, press OK to select Press OK again to finish renaming.

For more information on using the keyboard, press * Only for the remote control with keyboard

Lock a channel

To prevent children from watching a channel or a programme, you can lock channels or lock age rated programmes.

Lock a channel

You can lock a channel to prevent children from watching it. To watch a locked channel you need to enter the Child lock code. You cannot lock programmes from connected devices.



Keywords

and look up

and press OK.

Done

Remote control, keyboard



Some digital broadcasters have age rated their programmes. When the age rating of a programme is equal to or higher than the age you have set as age rating for your child, the programme will be locked. To watch a locked programme you must enter the child lock code. The parental age rating is set for all channels.

To set an age rating . . .

1 - Press and select 2 - Select

press 3 - Enter a 4-digit Child lock code and confirm. Now you can set an age rating.

4 - Set the age and press OK. 5 - Press , repeatedly if necessary, to close the menu.

To switch off the parental age rating, select The TV will ask for the code to unlock the programme. For

some broadcasters / operators, the TV only locks programmes with a higher rating.

Set or change the lock code

To set the lock code or to change the current code . . .

1 - Press and select 2 - Select

press OK. 3 - If a code is set already, enter the current Child lock code and then enter the new code twice.

The new code is set. Forgotten your code? If you have forgotten your code to unlock, call Consumer Care

in your country. Find the telephone number on the documentation that came with the TV or go to

www.philips.com/support

Channel settings

OK.

Channel settings

and press OK.

Setup

Child lock

and press OK.

Setup

Child lock

Parental rating

as age setting.

None

Change code

and

Options for channels

While watching a channel, depending on the type of channel (analogue or digital) you are watching or depending on the TV settings you made, some options are available.

To lock a channel . . . 1 - While watching a TV channel, press





OPTIONS

and select Unlock channel. You will need

and select

Channel list

2 - In any list, select the channel you want to lock. 3 - Press

list, a locked channel is marked with a lock . To unlock a channel, select the locked channel in the channel list.

Press to enter the Child lock code.

Parental rating

To prevent children from watching a programme not suitable for their age, you can use an age rating.



Lock channel

to open the

LIST

. In a channel

Open the options menu

While watching a channel, press

Universal access



OPTIONS

With Universal access switched on, you can set some options for hearing impaired and visually impaired people. For more information, press

Universal access

Video selection

Digital TV channels can offer multi video signals (multi-feed broadcast), different camera viewpoints or angles of the same event or different programmes on one TV channel. The TV shows a message if any such TV channels are available.



Keywords

and look up

Picture format

If black bars appear on top and bottom or on both sides of the picture, you can adjust the picture format to a format that fills the screen.

To change the picture format . . . 1 - While watching a TV channel, press  to open the

menu.

format

2 - Select a format from the list and press OK.

Picture

Subtitles

Switch

Automatic



Subtitle language

For digital broadcast, you can select an available subtitle language temporarily if none of your preferred languages are available. For more information, press

Subtitles

Audio languages

For digital broadcast, you can select an available audio language temporarily if none of your preferred languages are available. For more information, press

languages

Dual I-II

If an audio signal contains two audio languages but one language — or both — has no language indication, this option is available.

Common interface

If prepaid premium content is available from a CAM, you can set the provider settings with this option.

Subtitles on

to show subtitles only when the sound is muted with

Subtitles off

with this options. Select



Keywords

and look up



Keywords

and look up

Audio

The following format can be available according the picture on screen . . .

•

Basic

- Fill screen

- Fit to screen

•

Advanced

- Last setting

- Shift

- Zoom

- Stretch

- Native

- Undo

Text / Teletext

Text pages

To open Text (Teletext) while you are watching TV channels, press To close Text, press TEXT again.

TEXT

HbbTV on this channel

You can block the HbbTV pages from a channel that offers HbbTV. For more information, press

MHP applications

Enable or disable the MHP applications. For more information, press

Status

Select analogue or digital) or a connected device you are watching.

Enables the user to communicate his activity with his social networks (such as Twitter, facebook or email).

to view technical information on the channel (if it is

Status



Keywords

and look up

HbbTV



Keywords

and look up

MHP

Select a Text page

To select a page . . .

1 - Enter the page number with the number keys. 2 - Use the arrow keys to navigate. 3 - Press a colour key to select a colour-coded subject at the

bottom of the screen.

Text sub-pages

A Text page number can hold several subpages. The subpage numbers are shown on a bar next to the main page number. To select a subpage, press  or .

T.O.P. Text pages

Some broadcasters offer T.O.P. Text. To open T.O.P. Text pages within Text, press



OPTIONS

and select

T.O.P. overview

4 - Press , repeatedly if necessary, to close the menu.

Audio languages

Text options

In Text, press

•

Freeze page

To stop the automatic rotation of subpages.

•

Dual screen / Full screen

To show the TV channel and Text alongside each other.

•

T.O.P. overview

To open T.O.P. Text.

•

Enlarge

To enlarge the Text page for comfortable reading.

•

Reveal

To unhide hidden information on a page.

•

Cycle subpages

To cycle subpages when these are available

•

Language

To switch the group of characters that Text uses to display correctly.

•

Text 2.5

To activate the Text 2.5 for more colours and better graphics.

Text setup

Text language

Some digital TV broadcasters have several Text languages available. To set your primary and secondary Text language . . .



OPTIONS

to select the following . . .

If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language.

1 - While you watch TV, press 2 - For digital channels, select

channels, select selection. 3 - Select from the available languages, then press OK.

Note:

If you have selected select between:

•

: Primary audio language or

Main

•

: Secondary audio language

SAP

Alternate audio



OPTIONS

Audio language

. Press OK to confirm your

for analogue channels,

. For analogue

Subtitles and languages

Subtitles

Switch subtitles on

To open the Subtitle menu, press You can set subtitles to On, To show subtitles when the broadcasted programme is not in your language — the language you set for the TV, select

Automatic

the sound with . For analogue channels, subtitles must be made available in

. Also, this setting will show subtitles when you mute

Text

Off

SUBTITLE

Automatic

1 - Press and select 2 - Select 3 - Select 4 - Select your preferred Text languages. 5 - Press , repeatedly if necessary, to close the menu.

Text 2.5

If available, Text 2.5 offers more colours and better graphics. Text 2.5 is activated as a standard factory setting. To switch off Text 2.5 . . .

1 - Press 2 - While watching the teletext, press  3 - Select 4 - Press , repeatedly if necessary, to close the menu.

Menu language

To change the language or the TV menus and messages . . .

1 - Press and select 2 - Select

press OK. 3 - Select the language you want and press OK.

Channel settings Primary Teletext

TEXT

Text 2.5

TV settings

and press OK.

Setup

Language

Secondary Teletext

Off

and press OK.

Setup

General settings

OPTIONS

Menu language

and

Subtitles for digital channels

There is no need to set subtitles in Text for digital channels. Digital channels can offer several subtitle languages for a programme. You can set a preferred primary and secondary subtitle language. If subtitles in one of these languages are available, the TV will show them. If none of the preferred subtitle languages are available, you can select another subtitle language which is available.

To set the primary and secondary subtitle language . . .

1 - Press and select 2 - Select

subtitles language OK

Channel settings

and press OK.

Setup

and select

Secondary subtitles language

Languages

Primary

and press

3 - Select a language and press OK. 4 - Press , repeatedly if necessary, to close the menu.

To select a subtitle language when none of your preferred languages are available . . .

1 - Press 2 - Select

temporarily and press OK.

Subtitles for analogue channels

For analogue channels, you need to make the subtitles available for each channel manually.

1 - Switch to a channel and press 2 - Enter the page number for subtitles, usually 3 - Press

If you select On in the Subtitle menu when watching this analogue channel, subtitles will be shown if available. To know if a channel is analogue or digital, switch to the channel and open



OPTIONS

Subtitle language

again, to close Text.

TEXT

Status

in the

and select a language you want

to open Text.

TEXT

888

Options

menu.

Menu language

To change the language or the TV menus and messages . . .

1 - Press and select 2 - Select

press OK.

3 - Select the language you want and press OK. 4 - Press , repeatedly if necessary, to close the menu.

TV settings

and press OK.

Setup

General settings

Menu language

and

Interactive TV

About iTV

With interactive TV, some digital broadcasters combine their normal TV programme with information or entertainment pages. On some pages, you can respond to a programme or vote, do online shopping or pay for a video-on-demand programme.

Audio languages

Digital TV channels can broadcast audio with several spoken languages for a programme. You can set a preferred primary and secondary audio language. If audio in one of these languages is available, the TV will switch to this audio. If none of the preferred audio languages is available, you can select another audio language which is available.

To set the primary and secondary audio language . . .

1 - Press and select 2 - Select

audio language

3 - Select a language and press OK. 4 - Press , repeatedly if necessary, to close the menu.

To select an audio language when none of your preferred audio language is available . . .

1 - Press 2 - Select

temporarily and press OK.

Channel settings

Secondary audio language



OPTIONS

Audio language

and press OK.

Setup

and select

and select an audio language you want

Languages

Primary

and press OK.

HbbTV, MHEG, . . .

Broadcasters use various interactive TV systems : HbbTV (Hybrid Broadcast Broadband TV) or iTV (Interactive TV MHEG). Interactive TV is sometimes referred to as Digital Text or Red button. But each system is distinct.

Visit the broadcaster's Internet website for more information.

What you need

Interactive TV is only available on digital TV channels. To enjoy the full benefits of Interactive TV, you need a high-speed (broadband) Internet connection to the TV.

HbbTV

If a TV channel offers HbbTV pages, you must first switch on HbbTV in the TV settings to view the pages.

1 - Press and select 2 - Select

press OK.

3 - Select On and press OK. 4 - Press , repeatedly if necessary, to close the menu.

TV settings

Setup

and select

and press OK.

General settings

HbbTV

and

Audio languages for the hearing and visually impaired

Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing or visually impaired.

For more information, press 

Universal access.

Keywords

and look up

If you want to avoid access to HbbTV pages on a specific channel, you can block the HbbTV pages for this channel only.

1 - Tune to the channel of which you want to block the HbbTV pages. 2 - Press press OK. 3 - Select

Use iTV

Open iTV pages

Most channels that offer HbbTV or iTV invite you to press the



OPTIONS

and press OK.

Off

and select

HBB TV on this channel

and

+ 75 hidden pages

Philips 32PHT4509-12, 40PFT4509-12, 42PFT6309-12, 47PFT6309-12, 50PFT4509-12 Instruction manual

Contents