Philips 42PFL7409D-30 User Manual

www.philips.com/welcome

42PFL7409D/30

47PFL7409D/30

32PFL5609D/30

42PFL5609D/30

47PFL5609D/30

*non-contractual image

NE User manual

Contents

1 Notice 2

2 Important

7 Connect devices 25

Back connectors 25 Side connectors 26 Connect a computer 26 Assign devices 27 Use Philips EasyLink 28 Use a Kensington lock

English

3 Your product

Side controls and indicators 5 Remote control 5

4 Use your product 7

Switch your TV on/off or to standby 7 Switch channels 7 Watch connected devices 8 Adjust TV volume

5 Use your product in digital mode 9

Understand the information banner 9 Install channels 9 Test digital reception 10 Change the order of stored channels 11 Set your preferences 11 Control access to digital channels 12 Set up your favourite channels 14 Use the Electronic Programme Guide 14

8 Product information 30

9 Troubleshooting 32

10 Index 34

6 Use your product in analogue mode 15

Access TV menus 15 Change picture and sound settings 15 Create and use lists of favourite channels 18 Use timers 19 Use child control 19 Use subtitles 20 Use the TV clock 20 View photos, play music and watch video

from a USB storage device 21

Use Scenea to display a picture as TV

wallpaper 22 Update the TV software 23 Change TV preferences 24 Start a TV demo 24 Reset the TV to factory settings 24

1 Notice

2009 © Koninklijke Philips Electronics N.V. All rights reserved. Speci cations are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those speci ed herein, con rmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Philips cannot be held responsible either for any errors in the content of this document or for any problems as a result of the content in this document. Errors reported to Philips will be corrected and published on the Philips support website as soon as possible.

Pixel characteristics This LCD product has a high number of colour pixels. Although it has effective pixels of

99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

procedures not recommended or authorised in this manual, shall void the warranty.

Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips con rms that if its products are handled properly for their intended use, they are safe to use according to scienti c evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

Copyright All other registered and unregistered trademarks are the property of their respective owners. ® Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world.

Warranty No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips Service Centres and of cial repair shops. Failure to do so shall void any warranty, stated or implied. Any operation expressly prohibited in this manual, any adjustments, or assembly

2 Important

Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety

•

Risk of electric shock or  re!

•

Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. Never place the TV, remote control

• or batteries near naked  ames or other heat sources, including direct sunlight. To prevent the spread of  re, keep candles or other  ames away from the TV, remote control and batteries at all times.

•

Never inser t objects into the ventilation slots or other openings on the TV.

•

When the TV is swivelled ensure that no strain is exer ted on the power cord. Strain on the power cord can loosen connections and cause arcing.

Risk of shor t circuit or  re!

• Never expose the remote control or

• batteries to rain, water or excessive heat.

•

Avoid force coming onto power plugs. Loose power plugs can cause arcing or  re.

•

Risk of injury or damage to the TV!

•

Two people are required to lift and carry a TV that weighs more than 25 kg.

•

When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a  at, level surface that can support the combined weight of the TV and the stand.

•

When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage.

•

Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children:

•

Never place the TV on a surface covered by a cloth or other material that can be pulled away.

•

Ensure that no par t of the TV hangs over the edge of the surface.

•

Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the wall or a suitable support.

•

Educate children about the dangers of climbing on furniture to reach the TV.

•

Risk of overheating! Never install the TV in a con ned space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Risk of damage to the TV! Before you

• connect the TV to the power outlet, ensure that the power voltage matches

English

the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.

•

Risk of injury,  re or power cord damage! Never place the TV or any objects on the power cord.

•

To easily disconnect the TV power cord from the power outlet, ensure that you have full access to the power cord at all times.

•

When you disconnect the power cord, always pull the plug, never the cable.

•

Disconnect the TV from the power outlet and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable.

•

Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time. If the TV is transported in temperatures

• below 5°C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.

Recycling

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheeled bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC:

Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences for the environment and human health.

Screen care

•

Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage.

•

Unplug the TV before cleaning.

•

Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV.

•

Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. To avoid deformations and colour fading,

•

wipe off water drops as soon as possible.

3 Your product

Remote control

Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips offers; register your product at www.philips.com/welcome.

Side controls and indicators

English

4 5 6 7

10 11

12 13

14 15

a POWER : Switches the product on

or off. The product is not powered off completely unless it is physically unplugged.

b P/CH +/- : Switches to the next or

previous channel.

c d VOLUME +/- : Increases or decreases

SOURCE : Selects connected devices.

volume.

a ( Standby-On )

Switches the TV to standby if it is on.

• Switches on the TV if it is in standby.

•

b DIGITAL MENU

Accesses or exits the digital menu.

s 0-9 ( Numeric buttons )

Selects a channel or setting.

SOURCE

Selects connected devices.

d SUBTITLE

Enables or disables subtitles.

e DUAL

Switches Stereo and Nicam Stereo to Mono. Selects  rst language (Dual I) or second language (Dual II) in bilingual programmes.

( Home )

Toggles the home menu on or off.

OPTIONS

Accesses options relating to the current activity or selection.

h OK

Con rms an entry or selection.

( Navigation buttons )

Navigates through the menus.

INFO

Displays programme information, if available.

( Backward )

Searches backward.

( Forward )

Searches forward.

PICTURE ( Smart picture )

Launches the picture menu.

SOUND ( Smart Sound )

Launches the sound menu.

+/- ( Volume +/- )

Increases or decreases volume.

BACK A/CH

Returns to a previous screen. Toggles between the current channel and the last viewed channel.

GUIDE

Toggles the Electronic Programme Guide (EPG) on or off. Enabled on digital channels only.

y SCENEA ( Wallpaper )

Displays wallpaper on your TV screen.

z DEMO

Toggles the demonstration menu on or off.

{ TV

Switches back to the antenna source from EasyLink mode.

| ANALOG/DIGITAL

Selects between analog or digital mode.

( Play/Pause )

Starts, pauses or resumes disc play.

( Record )

Starts or stops video recording.

( Stop )

Stops disc play.

( Mute )

Mutes or restores audio output.

q CH +/- ( Channel +/- )

Switches to the next or previous channel.

FORMAT

Selects a picture format.

4 Use your product

Switch channels

This section helps you perform basic operations .

Switch your TV on/off or to standby

To switch on

If the standby indicator is off, press

• POWER at the side of the TV.

•

If the standby indicator is red, press ( Standby-On ) on the remote control.

To switch to standby

Press

• control.

To switch off

•

Press

( Standby-On ) on the remote

The standby indicator switches to red.

POWER at the side of the TV.

The standby indicator switches off.

Press BACK A/CH on the remote

• control to return to the previously viewed channel. Press CH +/- on the remote control or

• P/CH +/- on the side of the TV. Press OK to use the channel matrix.

• Enter a channel number using the

• Numeric buttons .

Note

When you use a favourite list, you can only

•

select those channels in the list (see ‘Select a favourite list’ on page 18 ) .

English

Tip

Though your TV consumes very little power

•

when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.

Watch connected devices

Note

For easy access, add new devices to the home

•

menu before selecting them.

Adjust TV volume

Use the source button

1 Press SOURCE .

The source list appears.

2 Press or to select the connected

device.

3 Press OK to watch the connected device.

Use the home menu

To increase or decrease volume

Press

•

Press VOLUME +/- on the side of the TV.

To mute or unmute sound

•

Press

•

Press

+/- .

to mute the sound. again to restore the sound.

Note

You can add new devices to the home menu

•

for easy access .

1 Press ( Home ).

The home menu appears.

2 Press to select the device. 3 Press OK to watch the connected device

on your TV.

5 Use your product

Install channels

in digital mode

Understand the information

banner

When you select a digital channel, an information banner is displayed at the top of the screen. The banner disappears after a few seconds. The information banner provides useful information on the current programme on the screen such as channel name, program title, start time of programme, and so on.

16:35 16:50 16:48NewsCCTV-20001080p

1 2 3 4 5 6 8 97

The  rst time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available).

Check for TV channels or radio

stations

You can check for the availability of TV channels or radio stations that have been launched by the broadcaster after you have installed the TV.

Note

If you are not in the digital mode, press

•

ANALOG/DIGITAL .

1 Press DIGITAL MENU . 2 Select [Installation] > [Service List] and

press

3 Press or to select [View TV

Channels] or [Listen to Radio Stations].

English

a Resolution : Indicates resolution type, for

example: 1080p.

b Favourite list indication : Indicated by a tick

if you have added this programme to your favourite list setting.

c Channel number : In the format “###”. d Channel name e Programme name f Programme star t time g Programme time progress bar : Displays

time left indicator bar.

h Programme end time i Clock : Current time

4 If new services are available, press to

enter into the list of services and press or

to move through the list.

5 Press the to return to the previous

menu or press DIGITAL MENU to exit.

Add new channels or stations to your

list

You can search for new TV channels or radio stations that have been launched by the broadcaster after the initial installation.

Note

If you are not in the digital mode, press

•

ANALOG/DIGITAL .

1 Press DIGITAL MENU . 2 Select [Installation] > [Service Setup]

and press

3 Press to Add new services and press

OK to activate the installation.

A search begins. Any new channels are added to the channel list menu. The percentage of the installation that has been completed and the number of channels found is displayed.

Note

To cancel installation, press OK .•

4 When the search is complete, press OK

to accept the new services.

5 Press to return to the previous menu

or press DIGITAL MENU to exit.

Reinstall all channels

4 Press OK to store the services. 5 Press to return to the previous menu

or press DIGITAL MENU to exit.

Install digital channels manually

You can manually install digital services by keying the channel number.

Note

If you are not in the digital mode, press

•

ANALOG/DIGITAL .

1 Press DIGITAL MENU . 2 Select [Installation] > [Service Setup] >

[Manually install services] and press

3 Press and to select the channel

number and

to select [Start Scan].

This option lets you reinstall all the digital TV channels and radio stations.

Note

If you are not in the digital mode, press

•

ANALOG/DIGITAL .

Caution

Reinstalling services will overwrite all your

•

previously stored channels.

1 Press DIGITAL MENU . 2 Select [Installation] > [Service Setup] >

[Reinstall services] and press

3 Press OK to start the installation.

A search is for digital services is started. The services are stored automatically.

4 Press OK to star t the search. 5 Press to return to the previous menu

or press the blue button to exit.

Test digital reception

If using digital broadcasts, you can check the signal quality and strength of digital channels. This allows you to reposition and test your antenna or satellite dish.

1 Press the numeric buttons (0-9) or CH

+/- to switch to the digital channel you

wish to test the signal of.

2 Press DIGITAL MENU 3 Select [Installation] > [Test Reception] >

[Frequency].

The frequency of the current channel

is displayed.

Note

To cancel installation, press OK .•

When the search is complete, the menu indicates the number of digital services found. You should see a list of stored channels on the left panel.

4 Press to select [Network Name] .

The name of the broadcast network is

displayed.

5 Press to select [Signal Quality] .

An indicator bar displays the quality

level of the TV signal.

+ 26 hidden pages