Philips 42PF7621D-10, 42PF7641D-10 User Manual

Download

Safety warnings . . . . . . . . . . . . . . . . . . . . . . . 2

Getting started . . . . . . . . . . . . . . . . . . . . . . . 3

Use of the remote control RC4350 . . . . . . . . 5

Use of the option key . . . . . . . . . . . . . . . . . . 7

Keys at the right side of the TV . . . . . . . . . . . 8

Introduction: Digital TV . . . . . . . . . . . . . . . . . 8

Switch the TV on . . . . . . . . . . . . . . . . . . . . . . 9

First time installation . . . . . . . . . . . . . . . . . . . 9

How to navigate through the menus . . . . . . 12

Use of the TV menu settings . . . . . . . . . . . . 13

Adjust picture menu settings . . . . . . . . . 15

Adjust sound menu settings . . . . . . . . . . 18

Adjust feature menu settings . . . . . . . . . 20

Search for and store TV channels . . . . . . 24

Rearrange the channel number list . . . . . 28

Set your preferences . . . . . . . . . . . . . . . 29

Select your connections . . . . . . . . . . . . . 30

Select a decoder channel number . . . . . 30

Reset the factory settings . . . . . . . . . . . 31

How to upgrade the TV software . . . . . . 31

Create your favourite list . . . . . . . . . . . . . . . 32

EPG (Electronic Programming Guide) . . . . . 33

Multimedia Browser . . . . . . . . . . . . . . . . . . . 35

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

To make video and audio connections . . . . . 41

Side panel overview . . . . . . . . . . . . . . . . 42

Rear panel overview . . . . . . . . . . . . . . . 43

Connect:

a VCR or DVD recorder . . . . . . . . . . . . 44

two VCRs or VCR and DVD recorder . . .45

a satellite receiver . . . . . . . . . . . . . . . . . 45

a DVD player, HD receiver/game console 46

a DVD player or HD receiver . . . . . . . . 46

a DVD player, sat. receiver

or HD receiver . . . . . . . . . . . . . . . . . . .47

a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

a Home Cinema amplifier . . . . . . . . . . . 49

Use the Common Interface slot . . . . . . . . . . 50

Select connected equipment . . . . . . . . . . . . 51

Record with your recorder . . . . . . . . . . . . . 51

Audio- and video equipment keys . . . . . . . . 52

Tr oubleshooting . . . . . . . . . . . . . . . . . . . . . . 53

Annex 1 - Philips TV software upgrade

with portable memory . . . . . . . . . . . . . . 55

Annex 2 - Philips TV-Slideshow Format

with background music . . . . . . . . . . . . . 58

Annex 3 - Philips TV - Digital camera

and USB issues . . . . . . . . . . . . . . . . . . . . 60

Annex 4 - Issues referring to connected

peripherals with a HDMI connector . . . . 61

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Product information . . . . . . . . . . . . . . . . . . . 63

Contents

If this instruction manual does not give an answer or if ‘Troubleshooting’ does not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied Worldwide guarantee booklet. Please, have the Model and Product number which you can find at the back or the bottom of your television set or on the packaging, ready, before calling the Philips customer support service.

Model: 42PF7621D/10; 37PF7641D/10; 42PF7641D/10

Product No: ....................................

About this User Manual

This manual contains all information you will need to initially install and operate your new TV. Also read the help texts which are being displayed at the bottom of the screen.

2584.3 en.qxd 29-03-2007 10:48 Pagina 1

Safety warnings

Do not insert the power plug in a wall socket or hang the TV to the wall before all connections are made.

• Place or hang the TV wherever you want, but make sure that air can circulate freely through the ventilation slots.

• Do not install the TV in a confined space such as a book case or a similar unit.

• To prevent any unsafe situations, no naked flame sources, such as lighted candles,should be placed in the vicinity.

• Avoid heat, direct sunlight and exposure to rain or water.

• The equipment shall not be exposed to dripping or splashing.

Do not touch, push or rub or strike the screen with anything hard as this may scratch,mar or damage the screen permanently. And please do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage. Do not use liquid cleaners or aerosol cleaners.Wipe off saliva or water drops as soon as possible.Their long time contact with the screen causes deformations and colour fading.

A characteristic of LCD and Plasma Panels is that displaying the same image for a long time can cause a permanent after-image to remain on the screen. Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen. Examples of stationary images (this is not an allinclusive list, you may encounter others in your viewing):

• TV and DVD menus: listings of DVD disk content;

• Black bars: when black bars appear at the left and right side of the screen, it is recommended to change to a picture format so that the picture fills the entire screen;

• TV channel logo: present a problem if they are bright and stationary. Moving or low-contrast graphics are less likely to cause uneven aging of the screen;

• Stock market stickers: presented at the bottom of the TV screen;

• Shopping channel logos and pricing displays: bright and shown constantly or repeatedly in the same location on the TV screen. Examples of still pictures also include logos, computer images, time display, teletext and images displayed in 4:3 mode, static images or characters, etc.

• Philips Royal Electronics manufactures and sells many products targeted at consumers, which,like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.

• One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.

• Philips is committed to develop, produce and market products that cause no adverse health effects.

• Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.

• Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

Your TV display is made with high-precision technology with a high number of colour pixels. Although it has effective pixels of 99,999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural property of the display (within common industry standards) and is not a malfunction.

Tip:reduce contrast and brightness when viewing.

Carefully pay attention to these remarks. The warranty does not apply to damage caused by not taking into account the above mentioned warnings on stationary images.

General

Stationary images on the TV screen

Pixel characteristics

Care of the screen

Electric, Magnetic and Electromagnetic Fields (“EMF”)

2584.3 en.qxd 29-03-2007 10:48 Pagina 2

Before you switch on your TV, connect all your peripheral equipment. See To make video and audio connections, p. 41.

There is a wide range of audio and video equipment that can be connected to your TV. See To make audio and video connections, p. 41.

EXT1 can handle CVBS, RGB and Audio L/R; EXT2 can handle CVBS, S-VIDEO, RGB,Audio L/R; EXT3 can handle YPbPr, RGB H/V and Audio L/R; HDMI 1 and 2.

Supported video formats: 480i, 480p, 576i, 576p, 720p, 1080i.

Getting started

Warning: do not insert the mains cord into the mains at the bottom of the TV and in a wall socket

or hang the TV on the wall before all connections are made.

PrPbY

RBG

AUDIO L/R

EXT3

EXT1EXT2

EXT2 EXT1

EXT3

COMMON INTERFACE HDMI 1

HDMI COMMON INTERFACE ANTENNA

AUDIO OUTDIGITAL

AUDIO

HDMI 2 ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o ROUT AUDIO

o DIGITAL

oooo

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

COMMON INTERFACE HDMI 1 HDMI 2 ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o ROUT AUDIO

o DIGITAL

oooo

Warning: disconnect all power sources before making any connections.

Tip: it is preferable to connect peripherals with RGB output to EXT1 or EXT2 as RGB provides a

better picture quality.

Before you start

Overview of the rear connector panel

2584.3 en.qxd 29-03-2007 10:48 Pagina 3

< Insert the aerial plug firmly into the aerial socket x at the

bottom of the TV.

Getting started (Continued)

-To connect a camera, camcorder or game, see To make video and audio connections, p. 42.

-To connect a headphone, see To make video and audio connections, p. 42.

-To connect a USB device, see Multimedia browser, p. 35.

UK - EIRE

Tip:for best quality use the suppressor cable supplied.

Warning:verify that the mains supply voltage corresponds

to the voltage printed on the sticker at the rear of the TV.

USB

Overview of the side connector panel

Connect the antenna

Connect the mains

< Insert the mains cord supplied into the mains at the bottom

of the TV and in the wall socket.

Remote control

< Insert the 2 batteries supplied (Type R6-1,5V).

Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.)

For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.

2584.3 en.qxd 29-03-2007 10:48 Pagina 4

Use of the remote control RC4350

B Standby

Press to switch the TV from or to standby mode. When switched to standby, a red indicator on the TV lights up.

DVD STB TV VCR AUX

Press the SELECT key repeatedly to select one of the system modes in which the remote control can be used. If no action is being undertaken within 60 seconds, the remote control returns to TV mode. After an action in the selected system mode the remote control will remain in this mode for 60 seconds and will then return to TV mode.

iOn screen information

Press to display (when available) information about the selected TV channel and programme.

b Dual screen

Press the b key to show teletext on the right of the screen.

DEMO Press to switch the Demo menu on or off.

Colour keys

- When functions are attached to the colour keys, the colour keys are shown on screen

-To select a page in Teletext mode

OPTION

-To open and close the Quick access menu which contains a few frequently used options, like Picture format.

- When in teletext, press repeatedly to enlarge the teletext page display. See Teletext, p. 39.

aTo open and close the Electronic Programme Guide.

See EPG (Electronic Programme Guide), p. 33.

Cursor keys

Press the cursor keys up/down, left/right to navigate through the menus.

OK - To activate a setting

- To display the channel list

- Starts playing content in the Multimedia Browser application.

BROWSE/MENU:

To open and close the main menu. See How to navigate through the menus, p. 12.

DVD STB TV VCR AUX

123

456

789

SELECT

DEMO

BROWSE

OPTION

MHEG

CANCEL

†

‡

FAV

Attention: the TV is never powered off completely unless it is physically unplugged.

2584.3 en.qxd 29-03-2007 10:48 Pagina 5

Use of the remote control RC4350 (Continued)

DVD STB TV VCR AUX

123

456

789

SELECT

DEMO

BROWSE

OPTION

MHEG

CANCEL

†

‡

FAV

bTeletext On/Off

Press to switch teletext on. See Teletext, p. 38-40. Only for UK: Digital text/Interactive television.

V Volume

Press + or - to adjust the volume.

¬ Mute key: interrupt the sound or restore it.

+P- Channel selection

- to browse through the TV channels and sources stored and marked in the Favourite channels lists;

- to select a page in Teletext mode;

- to quickly browse through the lists in the menus;

- to switch the TV on from standby mode.

0/9 Digit keys

To select a TV channel between 0 and 999.

Select your peripherals

See Installation menu, Select your connections, p. 30.

0 Previous channel

Press to alternate between the currently viewed and the previously viewed TV channel.

®Ò ‡ π †

See Audio and Video equipment keys, p. 52. See Multimedia browser functional keys, p. 37.

‡

MHEG CANCEL

Only for UK: Digital text/Interactive services. Press this key to cancel those special services (and the function bar at the bottom of the screen).

FAV To display the channels list.

You can create up to four favourite lists.

Attention: not all channels transmit interactive television applications at all times.

2584.3 en.qxd 29-03-2007 10:48 Pagina 6

Use of the OPTION key

DVD STB TV VCR AUX

SELECT

DEMO

BROWSE

OPTION

The OPTION key allows you to display the Quick access menu which will give you direct access to some features and menu options.

1. Press the

OPTION key.

> The Quick access menu appears.

2. Press the cursor up/down to select a menu item.

3. Press the

OK key to jump to the selected menu item in the

TV menu. (Except for the Clock option).

4. Use the cursor keys to make a selection.

5. Press the

OPTION key to exit.

Digital audio language:

See Adjust sound menu settings, p. 18.

Digital subtitle language:

See Adjust feature menu settings, p. 20.

Subtitles:

See Adjust feature menu settings, p. 20.

Picture format:

See Use of the TV menu settings, Adjust picture menu settings, p. 17.

Equalizer:

See Use of the TV menu settings, Adjust sound menu settings, p. 18.

Clock:

< Select to activate/deactivate the clock display on the screen.

Note: digital related menu items will only be accessible in case of digital TV broadcasting.

Quick access

Digital audio language

Digital subtitle language

Subtitles

Picture format

Equalizer

Clock

2584.3 en.qxd 29-03-2007 10:48 Pagina 7

Keys at the right side of the TV

In case your remote is lost or broken, apart from channel selection and volume adjustment, you can still change some of the basic settings with the keys at the side of your TV.

< Press the power switch B to switch the TV on or off.

The

MENU key can be used to summon the TV menu

without the remote control.

< Use the

VOLUME - and + keys and the

PROGRAM/CHANNEL - and + keys to select menu

items.

MENU PROGRAM/CHANNELVOLUME

Introduction: Digital TV

Besides traditional analogue broadcasts, you can also receive digital broadcasts via a roof or loft mounted digital antenna in countries where those signals are available and which are supported by this TV.Verify if the country you are now located and you have selected during the installations (see further), supports digital video broadcasting via antenna. See www.philips.com/support for the list of supported countries or consult your local dealer or see the sticker at the back of your TV.

Note:for digital TV channels via a cable connection, you will need an extra set top box decoder; for digital TV channel via satellite, a satellite tuner and dish mounted outdoors are required.Also certain internet providers offer digital TV channels via broadband internet and a settop box.

2584.3 en.qxd 29-03-2007 10:48 Pagina 8

Note: if the TV has already been installed before and/or you want to change the First time installation settings, proceed with Use of the TV menu settings, p. 13.

Switch the TV on

< Press the power switch B at the side of the TV or the B

key on the remote control.

Note: the first time (and only the first time) you switch on your TV, you see a Welcome screen followed by the installation procedure. See First time installation, p. 10.

First time installation

The installation procedure consists of a series of screens that will guide you through the installation of your TV. Follow the instructions on screen.

2584.3 en.qxd 29-03-2007 10:48 Pagina 9

After the Welcome screen you are asked to select a language of the TV's on-screen menus.The text of the header and the info on screen continuously change language.Also the digital audio and subtitle language will be set to the selected menu language.

1. Press the cursor up/down to highlight your language.

2. Press the

OK key on the remote control.

3. Follow the instructions on screen to proceed.

First time installation (Continued)

Step 1: select your on-screen language

3. Press the green colour key on your remote control to start the Automatic channel installation. > All available digital TV and radio channels and analogue

TV channels are searched for and stored automatically. This will take a few minutes.When the search is complete, the menu will indicate the number of digital and analogue channels found.

4. Press the red colour key again when the search is completed.

Notes:

-reception of digital terrestrial TV channels is applicable dependent on the country selected;

- if you choose to install the channels at a later time, select the Automatic installation in the TV menu, Installation, Channels to scan available channels.

1. Press the green colour key on your remote control when Television is highlighted.

2. Select the country where you are now located.

Step 2: complete the initial TV installation procedure

Notes:

- if you select a wrong country, the channel numbering will not be according to the standard for your country.

- in case the country selected is not DVB-T supported by your TV, digital related menu-items will not be accessible.

Previous Next Skip Stop

PHILIPS Television

System searching: please wait..........

Digital channels found 16

Analogue channels found 22

Stop

PHILIPS Installation

This will help you to install the following sections:

Television

Settings assistant

Menu language

English

Español

Français

Hrvatski

Italiano

Magyar

.............

Please select your

language.....

PHILIPS

using cursor up and

down

DVD STB TV VCR AUX

SELECT

DEMO

BROWSE

OPTION

2584.3 en.qxd 29-03-2007 10:48 Pagina 10

By means of several split screens/full screens you are prompted to select your preferred picture and sound settings, to finally arrive at a complete setting which satisfies you.

1. Press the green colour key on your remote control to enter the Settings assistant menu.

2. Select your Location with the cursor up/down. > If you choose Shop it will skip the Settings assistant.

The TV parameters for Picture and Sound will then be

set to predefined fixed settings. Press the green colour key again to proceed. > If you choose Home it will display the Settings

assistant.

3. Use the cursor left/right to each time select your preferred screen.

4. Press the green colour key to each time confirm your selection and to jump to the following screen. > The following items will be presented sequentially.

In the header it is mentioned how many screens have been completed and how many screens there are in

total. The Settings assistant will step sequentially through the following settings: Picture and Sound.

5. Press the green colour key again to store all the settings and to return to the TV installation menu.

6. Press the green colour key again to finish the First time installation procedure and to display the first stored TV channel.

First time installation (Continued)

Note: when you skip or stop the Settings Assistant, then

the standard settings Philips selected for you will be chosen.

Note:any time you can change or reset your settings or adjust individual settings for Picture and Sound in the TV settings menu. See p. 13, Use of the TV menu settings. To control the settings of special TV functions, features and accessory equipment, see p. 20, Adjust feature menu settings.

Step 3: Settings assistant: select your TV settings

Previous Next Skip Stop

PHILIPS Installation

This will help you to complete the Settings assistant. Television

Settings assistant

PHILIPS Settings assistant

Please select your location before

continuing:

Home

Shop

2584.3 en.qxd 29-03-2007 10:48 Pagina 11

A lot of guiding instructions, help texts and messages will be displayed on your TV when you use the menus or when you try to execute an action. Read the help texts which are being displayed on the specific item highlighted. The colour keys at the bottom of the screen refer to the different actions which may be executed. Press the corresponding colour key on the remote control to perform the required or desired action.

1. Press the

MENU/BROWSE key on the remote control.

> The main menu appears on the screen.

- TV menu allows you to access the TV menu. See below.

- Channel list allows you to access the TV channel list and to create up to four favourite lists with your preferred TV channels and digital radio stations. See Create your favourite channel list, p. 32.

- Programme guide allows you to access detailed information about individual digital TV programmes. According to the type of Electronic Programme Guide, it also allows you to access the table of scheduled Digital TV programmes and easily select and tune to a desired programme. See EPG, Electronic Programme Guide, p. 34.

- Multimedia allows you to access the Multimedia browser application. It lets you display your personal multimedia files. Multimedia is only present when a USB device is connected. See Multimedia browser, p. 35.

2. Use the cursor up/down to highlight and select a menu item.

3. Use the cursor right to enter the highlighted menu item. > The right panel shows the content of the highlighted

menu item.

4. Use the cursor up/down to select a menu item.

- TV settings allows you to adjust your preferred picture

and sound settings

- Features allows you to control the settings of special TV

features

- Installation allows you

- to select your language preferences;

- to search for and store your TV channels;

- to set or adjust various special functions;

- to select connected peripheral equipment;

- to define one or more channel numbers as decoder channel numbers;

- to reset your picture and sound settings to the factory standard settings;

- to upgrade your TV software

How to navigate through the menus

Introduction

Note: digital related menu items will only be accessible in case

of digital TV broadcasting.

Info

TV menu

TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

Television

Multimedia

TV menu

Channel list

Programme guide

DVD STB TV VCR AUX

123

456

SELECT

DEMO

BROWSE

OPTION

BROWSE

2584.3 en.qxd 29-03-2007 10:48 Pagina 12

How to navigate through the menus (continued)

5. Press the cursor right to enter the highlighted menu item. > The content of the right panel is moved to the left panel

and the right panel now shows the content of the newly highlighted item in the left panel.

6. Press the

MENU/BROWSE key to exit the main menu.

Note: in some cases it is important that the picture can be

watched while you adjust the settings.This means that when the highlight is on the right side panel, the other menu items hide away.When the cursor left is pressed, the hidden menu items reappear and the highlight moves to the left panel.

Info

TV menu

TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

Use of the TV menu settings

1. Press the MENU/BROWSE key on the remote control. > The main menu appears on the screen.

2. Select TV menu and press the cursor right. > The TV menu is displayed.

3. Select TV settings and press the cursor right. > The TV settings menu is moved to the left.

4. Press the

MENU/BROWSE key to exit the menu.

To make it easier to change the settings of the TV, there are 3 ways of doing it. See next pages.

Adjust viewing and listening settings

The TV menu allows you to access and change settings and preferences in case you want to change the First time installation settings and/or you want to control the settings of special TV functions, features and peripheral equipment

Television

Multimedia

TV menu

Channel list

Programme guide

Info

TV menu TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2584.3 en.qxd 29-03-2007 10:48 Pagina 13

Use of the TV menu settings (continued)

Each time you've made a selection, press the green key to confirm your selection.

1. Select Settings assistant and press the cursor right. > By means of several split screens/full screens you are

prompted to select your preferred picture and sound settings to finally arrive at a complete setting which satisfies you. See First time installation, Step 3: Settings assistant: select your TV settings, p. 11.

2. Press the green colour key to return to the TV menu again.

A. Change settings in an easy-to-use manner with the

Settings assistant.

Info

TV menu TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

< Select Picture or Sound and press the cursor right.

> A menu appears which allows you to fine tune the

picture and sound settings.

> To adjust the Picture settings, see Adjust picture menu

settings, p. 15.

> To adjust the Sound settings, see Adjust sound menu

settings, p. 18.

C. Individual settings for picture and sound.

This allows you to reset your settings for viewing and listening to predefined factory settings.

1. Select Reset to standard and press the cursor right. > A menu appears which allows you to select one of the

standard settings for viewing and listening.

> Current shows your current settings for viewing and

listening.

> If you select Vivid, it allows you to set your picture and

sound settings to rich values, making use of the TV capabilities to its full extend.

> If you select Natural, it allows you to set your picture

and sound settings to the recommended standard values. In most cases this will give the best balanced viewing experience.

> If you select Subtle, it allows you to set your picture

and sound settings to the purest representation of the original source content.

2. Press the green colour key to store the selected setting.

B. Use of the Standard settings (if present)

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Reset to standard

Current

Natural

Vivid

Subtle

Note: storing a standard setting will overwrite your current settings for viewing and listening.

Note:read the help texts which are being displayed on the specific item highlighted.

Info

TV menu TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2584.3 en.qxd 29-03-2007 10:48 Pagina 14

The picture menu contains the settings that affect the quality of the picture.

1. Press the MENU/BROWSE key on the remote control.

> The main menu appears.

2. Select TV menu and press the cursor right.

> The TV menu is moved to the left.

3. Select TV settings and press the cursor right.

> The TV settings menu is moved to the left panel.

4. Select Picture and press the cursor right.

> The Picture menu is moved to the left panel.

5. Use the cursor up/down to select the Picture menu items.

6. Press the cursor right to enter the selected Picture menu

item.

7. Use the cursor keys to adjust the settings.

8. Press the cursor left to return to the Picture menu.

Contrast

Adjusts the intensity of bright parts in the picture but keep the dark parts unchanged.

Brightness

Adjusts the light output of the complete picture, which will mainly affect the darker areas of the picture.

Colour

Adjusts the saturation level of the colours to suit your personal preference.

Hue

Compensates for the colour variations in NTSC encoded transmissions.

Sharpness

Adjusts the sharpness of fine details in the picture.

Tint

Increases or decreases Warm (red) and Cool (blue) colours to suit personal preferences.

< Select Cool to give the white colours a blue, Normal to

give the white colours a neutral, Warm to give the white colours a red tint.

< Select Custom to make a customised setting in the

Custom tint menu item.

Adjust picture menu settings

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Picture

Contrast

Brightness

Colour

Hue

Sharpness

Tint

..............

Note: all digital related menu items will only be accessible in case of digital TV broadcasting.

Info

TV menu TV settings

Settings assistant

Reset to standard

Picture

Sound

TV settings

Features

Installation

2584.3 en.qxd 29-03-2007 10:48 Pagina 15

Adjust picture menu settings (Continued)

Custom tint (only when Tint is set to Custom)

Fine tunes the white point (

WP) and black level (BL) of

the picture.

1. Select

Custom tint and press the cursor right.

2. Use the cursor keys to select and adjust the settings of:

R-WP: allows you to customise the colour tint by

adjusting the red whitepoint of the picture.

G-WP: allows you to customise the colour tint by

adjusting the green whitepoint of the picture.

B-WP: allows you to customise the colour tint by

adjusting the blue whitepoint of the picture.

R-BL: allows you to customise the colour tint by

adjusting the red blacklevel of the picture.

G-BL: allows you to customise the colour tint by

adjusting the green blacklevel of the picture.

3. Use the colour keys to reset to the predefined settings.

4. Press the cursor left to return to the Picture menu.

Pixel Plus

Pixel Plus is the most ideal setting, as it fully processes the image to make every single pixel the best it can be, improving contrast, sharpness, picture depth, and colour reproduction and brilliance from every source, including High Definition.

< Select On or Off to activate/de-activate Pixel Plus.

Digital Natural Motion

Reduces the field and line flicker and reproduces smooth movement especially in movies.

< Select Off, Minimum or Maximum in order to really

see the difference in picture quality.

Dynamic contrast

Automatically makes the contrast in the darker and the brighter picture areas more noticeable as the image on the screen changes.

< Normally select Medium. It may be preferred to select

Minimum, Maximum or Off.

DNR

DNR automatically filters out and reduces the image

noise.This improves picture quality when receiving weak signals.

< Select Off, Minimum, Medium or Maximum according

to the image noise in the picture.

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Picture

.............

Custom tint

Pixel Plus

Dig. Natural Motion

Dynamic contrast

DNR

.............

2584.3 en.qxd 29-03-2007 10:48 Pagina 16

MPEG artefact reduction

MPEG artefact reduction On smoothens the

transitions on digital content.

< Select On or Off.

Colour enhancement

Automatically controls green enhancement and blue stretch. It makes the colours more vivid.

< Select Off, Minimum, Medium or Maximum.

Active control

The TV continuously measures and corrects all incoming signals in order to provide the best picture possible.

< Select On or Off to activate/de-activate Active control.

Light sensor

Light sensor On automatically adjusts the picture settings for best viewing dependent on the lighting conditions in the room.

< Select On or Off.

Picture format

This allows you to adjust the size of the picture dependant on the broadcasted format and your preferred setting. How to navigate through the TV settings menu, see p. 13: Use of the TV menu settings.

Choose among the following picture formats:Auto format, Super zoom, 4;3, Movie Expand 14:9, Movie Expand 16:9 or Wide screen.

Auto format makes the picture fill the screen as much as possible. In case of subtitles in the bottom black bar, Auto format makes the subtitles visible. In case of a broadcaster logo in the corner of the top black bar, the logo disappears from the screen. Super zoom removes the black bars on the sides of 4:3 programmes with minimal distortion. When in Movie Expand 14:9, Movie Expand 16:9 or Super zoom screen format, you can make subtitles visible with the cursor up/down.

Adjust picture menu settings (Continued)

Auto format Super zoom

4:3

Movie expand 14:9

Movie expand 16:9 Wide screen

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Picture

.............

DNR

MPEG artefact red.

Colour enhancem..

Active control

Light sensor

Picture format

Note: with HD sources not all picture formats will be available.

Tip: this function is also accessible via the

OPTION

key

on the remote control, see p. 7.

2584.3 en.qxd 29-03-2007 10:48 Pagina 17

The sound menu contains the settings that affect the quality of the sound.

1. Press the MENU/BROWSE key on the remote control.

> The main menu appears.

2. Select TV menu and press the cursor right.

> The TV Menu is moved to the left.

3. Select TV settings and press the cursor right.

> The TV settings menu is moved to the left panel.

4. Select Sound and press the cursor right.

> The Sound menu is moved to the left panel.

5. Use the cursor up/down to select the Sound menu items.

6. Press the cursor right to enter the selected Sound menu

item.

7. Use the cursor keys to adjust the settings.

8. Press the cursor left to return to the Sound menu.

Equalizer

Allows you to change the frequency response of the sound to match your personal taste.

Volume

Allows you to adjust the sound output level.

Balance

Allows you to adjust the output of the right and left speakers to obtain the best stereo reproduction for your listening position.

Digital audio language

Allows you to select an audio language out of the list of the available broadcasted languages for the current digital programme.

Adjust sound menu settings

Note: dependent on the input signal, one or more menu

items may not be selectable.

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Sound

Equalizer

Volume

Balance

Digital audio lang..

Dual I/II

Mono/Stereo

.............

Note: if there is more than one variant for an audio language, then select one of the variants. To permanently change the audio language, use the Language menu in the Installation menu.

Tip: this function is also accessible via the OPTION key on the remote control.

2584.3 en.qxd 29-03-2007 10:48 Pagina 18

Adjust sound menu settings (Continued)

Dual I/II

Allows you to select, per channel, Dual I or II, when dual sound transmission is available.

Mono/Stereo

Allows you to select, per TV channel, Mono or Stereo sound when stereo broadcasts are available.

Surround mode

Allows you to select the modes for more spatial or surround sound reproduction dependent on the broadcasted signals or signals from external inputs received.

Headphone volume

Allows you to control the level of sound through the headphones.

AVL (Automatic Volume Leveler)

Automatically reduces the volume differences between channels and programmes, providing a more constant overall level.This will also reduce the dynamics of sound.

Delta volume

Allows you to correct for any permanent volume differences between TV channels or external sources.

Auto surround

When switched On, this allows the TV to automatically switch to the best surround sound mode the broadcaster transmits.

Settings assistant

Reset to standard

Picture

Sound

Info

TV menu

TV settings

Sound

.............

Mono/Stereo

Surround mode

Headphone volume

AVL

Delta volume

Auto surround

2584.3 en.qxd 29-03-2007 10:48 Pagina 19

The Features menu allows you to control the settings of special TV functions, features and accessory equipments.

1. Press the

MENU/BROWSE key on the remote control.

> The main menu appears.

2. Select TV menu and press the cursor right. > The TV Menu is moved to the left.

3. Select Features and press the cursor right. > The Features menu is moved to the left panel.

4. Use the cursor up/down to select the Features menu items.

5. Press the cursor right to enter the selected Features menu item.

6. Use the cursor keys to adjust the settings.

7. Press the cursor left to return to the Features menu.

Subtitle

This displays Teletext and DVB-T subtitles from the selected TV channel.These can be permanently displayed, or only when mute is active.The teletext subtitle page of analogue channels must be stored for each TV channel.

1. Switch on teletext and select the proper subtitle page from the index.

2. Switch off teletext.

3. Select

- Subtitle On to display the subtitles on the selected TV

channels.

- On during mute to automatically display the subtitles

only when the sound has been muted with the ¬ key on the remote control.

Adjust feature menu settings

Digital subtitle language

This allows you to (temporarily) select your preferred subtitle language out of the list of the broadcasted languages for the current programme.

< Use the cursor up/down to temporarily overrule your

permanent language selection and confirm with the

OK key.

Note: to permanently change the subtitle languages, use

the Language menu in the Installation menu.

Info

TV menu Features

Subtitle

Digital subtitle lan..

Sleeptimer

Childlock

Set/Change code

On timer

.............

TV settings

Features

Installation

Tip: this function is also accessible via the OPTION key on the remote control.

2584.3 en.qxd 29-03-2007 10:48 Pagina 20

Sleeptimer

This sets a time period after which the TV automatically switches to standby.

1. Select Sleeptimer.

2. Press the cursor right.

3. Select a value with the cursor up/down. > The list will have values from 0 to 180 minutes.When 0

is selected, the sleeptimer is switched off.

Childlock

With a 4-digit code, you are able to lock TV channels and external sources to prevent children from watching certain programmes.

1. Select Childlock.

2. Press the cursor right to enter the Childlock menu.

3. Enter your 4-digit code.

4. Select one of the menu items of the Childlock menu and press the cursor right:

- Lock to lock all channels and externals:

- Custom lock to lock a certain programme or to lock all

the channels from a certain time.

< Select:

- Lock after to lock all programmes from a certain time onwards.

< Press the cursor right twice. < Select On to set the lock. < Press the cursor left. < Select Time and press the cursor right. < Enter the time with the cursor up/down and right. < Press the MENU/BROWSE key to switch off the

menu.

- Channel lock to lock a certain TV channel or external. < Press the

OK key to activate/deactivate.

- Parental rating to set an age rating to a digital programme if the programme is parental rated.The ratings applied are according the selected country in the initial installation. < Press the cursor right and select an age rating with the

cursor up/down.

- Select Unlock to disable all locks you have set.

Note:you can always switch off your TV earlier or select another time set.

Adjust feature menu settings (Continued)

Info

TV menu Features

.............

Sleeptimer

Childlock

Set/Change code

On timer

Common interface

Demo

TV settings

Features

Installation

Note:you have to re-enter your code each time you enter the Childlock menu.

Important: you have forgotten your code !

1. Select Change code and press the cursor right.

2. Enter the overriding code 8-8-8-8.

3. Enter a new personal 4-digit code.

4. Confirm your new entered code.

The previous code is erased and the new code is stored.

2584.3 en.qxd 29-03-2007 10:48 Pagina 21

Adjust feature menu settings (Continued)

Set code/Change code

This allows you to set or change the personal 4-digit access code that is used in the different lock functions of the TV.

< Select Set or Change code.

> If no PIN-code exists yet, the menu item is set to Set

code.Follow the instructions on screen.

> If a PIN-code has previously been entered, the menu

item is set to Change code.Follow the instructions on screen.

< Enter your code with the digit keys.All number

combinations from 0000 to 9999 are valid numbers. > The Features menu reappears with a message confirming

that your PIN-code has been created or changed.

On timer

From standby, this automatically switches the TV to the specified channel number, at a specified time.

1. Select On timer.

2. Press the cursor right to enter the On timer menu.

3. Select Timer and press the cursor right.

4. Select On.

5. Select Channel and then the TV channel you want your TV to switch to on a selected time and day

6. Select Day and then a day of the week or select Daily.

7. Select Time and enter the time with the digit keys or with the cursor up/down.

8. Press the

OK key to activate.

9. Press the cursor left to return to the Features menu or press the

MENU/BROWSE key to switch off the menu.

Info

TV menu Features

.............

Sleeptimer

Childlock

Set/Change code

On timer

Common interface

Demo

TV settings

Features

Installation

Note:From now on, every week,your TV will automatically switch to the selected channel, on the selected day, at the selected time, until the On timer function is switched off again.

2584.3 en.qxd 29-03-2007 10:48 Pagina 22

Common interface

This allows you to access common interface applications defined by the service provider of the Common Interface (CI) module. The Common Interface (CI) module can contain one or more applications, which are used to communicate with the CI service provider and provide some additional facilities to the user.

See Use the Common Interface slot, p. 50.

Demo

This allows you to get an idea of the features that are part of the television.

1. Select Demo.

2. Press the cursor right.

3. Select a desired demo.

4. Press the

OK key to start the demo.

> The selected demo is played once.

5. Press the red colour key to stop the demo and to return to the demo menu.

6. Press the red colour key to exit the demo menu.

Adjust feature menu settings (Continued)

Note: this menu item and the common interface

applications are only displayed when an authenticated Common Interface card is present and some Common Interface card user interface sessions are listed. The CI service provider is responsible for the messages and texts on screen. In case of failure or strange behaviour, you must call your CI service provider.

Info

TV menu

Features

Demo

Pixel Plus

Settings assistant

Active control

Subtitle

Dig. subtitle langu.

Sleeptimer

Childlock

Set/Change code

On timer

Common interface

Demo

Info

TV menu Features

.............

Sleeptimer

Childlock

Set/Change code

On timer

Common interface

Demo

TV settings

Features

Installation

Note: this functionality is only available in certain countries.

2584.3 en.qxd 29-03-2007 10:48 Pagina 23

This menu allows you to select your preferred language for menu, audio and subtitle.

Menu language

This allows you to select your menu language out of the list of the available languages.

Preferred audio language

This allows you to select your audio language preference in case several languages are broadcasted.

Preferred subtitle language

This allows you to select your subtitle language preference in case several languages are broadcasted.

Hearing impaired

This allows you to select the hearing impaired audio or subtitle language. When set to On, the Hearing impaired version of your preferred audio or subtitle language will, if available, be reproduced. When set to Off, the normal audio and subtitle language behaviour will be applicable.

How to search for and store TV channels

Select your language preferences

This menu will adjust settings related to the installation of the TV channels, language and country and to the initial installation of your TV.

1. Press the

MENU/BROWSE key on the remote control.

> The main menu appears.

2. Select TV menu and press the cursor right. > The TV Menu is moved to the left.

3. Select Installation and press the cursor right. > The Installation menu is moved to the left panel.

4. Use the cursor up/down to select the Installation menu items.

5. Press the cursor right to enter the selected Installation menu item.

6. Use the cursor keys to make a selection.

7. Press the

OK key to activate or to confirm.

8. Press the cursor left to return to the Installation menu or press the

MENU/BROWSE key to switch off the menu.

Installation menu

Tip:you will need this chapter only if you want to change the installation settings.

Info

TV menu Installation

Languages

Country

Time zone

Channels

Preferences

Connections

.............

TV settings

Features

Installation

Info

TV menu

Installation

Languages

Menu language

Preferred audio l...

Preferred subtitle...

Hearing impaired

Languages

Country

Time zone

Channels

Preferences

Connections

Decoder

.............

Television

Multimedia

TV menu

Channel list

Programme guide

2584.3 en.qxd 29-03-2007 10:48 Pagina 24

How to search for and store TV channels (Continued)

After language and country are set correctly, you can now search for and store the TV channels.

< Select Channels in the TV, Installation menu.

Automatic installation

The TV will scan the entire frequency spectrum based on the selected country. > All available digital and analogue TV and digital radio

channels are searched for and stored automatically. This will take a few minutes.

> When the search is complete, the menu will indicate the

number of digital and analogue channels found.

Select your country

Select the time zone

(only with digital TV broadcasting)

Notes:

- if you select a wrong country, the channel numbering will not be according to the standard for your country;

- in case the country selected is not DVB-T supported by your TV, digital related menu-items will not be accessible.

This allows you to select the country where you are now located.

Only applicable for certain countries and dependent on the selected country.

This allows you to select your local time zone so that the clock display shows the correct time.

Store TV and radio channels

Info

TV menu Installation

.............

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

TV settings

Features

Installation

Info

TV menu

Installation

Channels

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

Time zone

Channels

Preferences

Connections

Decoder

.............

2584.3 en.qxd 29-03-2007 10:48 Pagina 25

Digital: test reception (only with digital TV broadcasting)

This allows you to see the quality and the strength of the signal reception for a digital frequency.This enables you to find the antenna position that gives the best reception.

< Select Digital: test reception and press the cursor right.

> You obtain an indication of the actual channel frequency,

the network name, the signal quality and strength.

> If the signal quality and strength is poor, you can try

repositioning the aerial.

How to search for and store TV channels (Continued)

Installation update

This allows you to automatically tune to and update all available digital channels without altering the sorting of existing channels. For example, the name of the channel is not altered.

Notes:

- this will not reinstall uninstalled channels;

-new channels found will not be added to any favourite list;

- already installed channels will not be renumbered.Geen

Tip: it is however advisable to contact a specialised aerial installer in order to achieve the best results. You can also directly enter the frequency of the digital channels you want to test.

Info

TV menu

Installation

Channels

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

Time zone

Channels

Preferences

Connections

Decoder

.............

2584.3 en.qxd 29-03-2007 10:48 Pagina 26

Analogue: manual installation

This gives you the possibility to manually install (tuning-in channel by channel) analogue channels. Manual installation will not find nor store any DVB-T (digital) channels.

1. Select Analogue: manual installation and press the cursor right.

2. Select System.

3. Select your country or part of the world where you are now located.

4. Select Search and press the cursor right.

5. Select the red or green colour key to proceed.

6. Press the cursor left to store the channel found or to search for another channel.

7. Select Fine tune and press the cursor right. Fine tuning can be useful when the frequency has shifted a bit or when interference of another frequency occurs. Adjust the frequency with the cursor up/down in case of poor reception of the channel found.

8. Select Store current channel if you want to store the (fine tuned) frequency under the current channel number. Press the cursor right and confirm with the

OK key.

Select Store as new channel if you want to store the (fine tuned) frequency under a new channel number. Press the cursor right and confirm with the

OK key.

9. Use the rearrange menu to rename or reshuffle the channels. See next page.

How to search for and store TV channels (Continued)

Note: when on a frequency where a DVB signal is

broadcasted, the tuner will try to decode an analogue TV channel, and hence will not show video.

Tip: if you know the frequency, enter the 3 digits of the frequency with the digit keys 0 to 9 (For example, 049).

Info

TV menu

Installation

Channels

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

Time zone

Channels

Preferences

Connections

Decoder

.............

2584.3 en.qxd 29-03-2007 10:48 Pagina 27

This allows you to rename, to reshuffle and to uninstall or reinstall the stored channels.

< Press the corresponding colour keys and follow the on

screen instructions.

Reshuffle

This allows you to change the order of the stored TV channels.

1. Select the channel you want to change place.

2. Press the yellow colour key to move up a single position in the list.

3. Press the blue colour key to move down a single position in the list.

4. Repeat to reshuffle other TV channels.

Rename

This allows you to change the name stored in the memory or to assign a name to a channel or external for which a name has not yet been entered.

1. Select the channel you want to rename.

2. Press the red colour key on your remote control.

3. Select the characters with the cursor up/down. Select the following position with the cursor right.

4. Press the green colour key or the

OK key when finished.

5. Select another channel number and repeat steps 2 to 5.

Uninstall - reinstall

This allows you to uninstall a stored channel so that it is no longer possible to tune to.This also allows you to reinstall an earlier uninstalled channel.

1. Select the channel you want to uninstall.

2. Press the green colour key to uninstall the selected channel. > The uninstalled channel is indicated in the list by an icon

in front of the uninstalled channel.

3. Press the green colour key again to reinstall the uninstalled channel.

Rearrange the channel number list

Notes:

-press the yellow colour key to delete all characters.The cursor is positioned at the beginning again;

-press the blue colour key to delete the character the cursor is positioned. Enter a new character with the cursor up/down;

- a name can be given to the channel numbers 0 to 999;

- space, numbers and other special characters are located between Z and A.

Note: uninstalled channels are not reinstalled during an installation update.

Rearrange

Rename Uninstall

Move up

Move down

Info

TV menu

Installation

Channels

Autom. installation

Installation update

Digital: test recept..

Analogue: manual..

Rearrange

Languages

Country

Time zone

Channels

Preferences

Connections

Decoder

.............

Info

TV menu/Installation

Channels

Rearrange

Automatic instal...

Installation update

Digital: test rec....

Analogue: manual

Rearrange

2584.3 en.qxd 29-03-2007 10:48 Pagina 28

This menu contains items that can set or adjust various special TV functions and that will typically be accessed only occasionally.

Select your location

This allows you to select the location of your TV. If you choose for Shop it will result in fixed settings of picture and sound. The location Home will give full flexibility to change any predefined settings for picture and sound.

Select Teletext 2.5

Some broadcasters offer the opportunity to see more colours, other background colours and nicer pictures in the teletext pages.

< Select Teletext 2.5 On to take advantage of this feature. < Select Teletext 2.5 Off if you like the more neutral

teletext layout. > The selection made is valid for all the channels which

broadcast Teletext 2.5.

Select the On Screen Display (OSD)

This allows you to select the display of the volume bar and a reduced or extended on screen display of programme and channel information.

< Select Minimum to activate the display of reduced channel

information.

< Select Normal to activate the display of extended channel

and programme information. For example, information on the programme, input signal quality of connected peripheral equipment, the screen format and sound mode, selected audio language, subtitle language, ratings, remaining time of the sleeptimer setting,...

Display a Programme title

This allows you, to display the programme title according to the transmitted information. > When selected Ye s , after the selection of a TV

programme or after you press the i key on the remote control, a programme title will be displayed if transmitted.

Set your preferences

Note: it may take a few seconds before teletext broadcast

switches over to Teletext 2.5.

Info

TV menu

Installation

Preferences

Location

Teletext 2.5

OSD

Programme title

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

2584.3 en.qxd 29-03-2007 10:48 Pagina 29

This allows you to select the peripheral equipment you have connected to the audio and video connectors.

1. Select Connections.

2. Press the cursor right.

3. Select the input to which the peripheral equipment is connected. > When you select

EXT1, EXT2, EXT3, HDMI 1,

HDMI 2, Side or DIGITAL AUDIO IN,a list appears

which allows you to identify which type of peripheral equipment is attached to this input.

4. Press the cursor right again to enter the list of types of peripherals connected to the selected input.

5. Select the peripheral equipment with the cursor up/down.

Digital Audio In

< If a peripheral equipment has a digital audio output, you can

connect this with a single cable to the TV’s DIGITAL AUDIO IN connector.

< In the Connections menu, assign the DIGITAL AUDIO IN

to the corresponding external input to which your peripheral equipment is connected.

In addition to accepting audio input via DIGITAL AUDIO IN, the TV can output encoded Dolby Digital audio via the

DIGITAL AUDIO OUT connector to an external amplifier

or receiver. If your amplifier or receiver has a matching connector for DIGITAL AUDIO IN, you can connect it with a single cable to the TV's

DIGITAL AUDIO OUT.

See To make video and audio connections, Connect a Home Cinema amplifier, p. 49.

Select a Decoder channel number

Select your connections

This allows you to define one or more channel numbers as decoder channel numbers when a decoder or a descrambler is connected to

EXT1 or EXT2.

1. Select the channel number under which you have stored the programme that comes from your decoder or descrambler.

2. Select Status.

3. Select the input used to connect your decoder: None,

EXT1 or EXT2.

< Select None if you do not want the selected channel

number being activated as a decoder channel number.

Info

TV menu

Installation

Decoder

Channel

Status

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Info

TV menu

Installation

Connections

EXT1

EXT2

EXT3

HDMI 1

HDMI 2

Side

DIGITAL AUDIO IN

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

2584.3 en.qxd 29-03-2007 10:48 Pagina 30

This allows you to upgrade your TV software using a USB device.

USB device upgrade

It is possible to initiate an upgrade procedure from a USB device before you start up the TV.The memory device must be filled with the appropriate upgrade image (and structure) which can be found on the www. philips.com/support website. How to upload a new software version on your memory device, see Annex 1, Philips TV software upgrade with portable memory, p. 55.

Automatic software announcement (if present)

When you switch on your TV a message may appear that a new software upgrade is available.

< Press the red colour key on your remote control if you

want to be reminded later on.

< Press the green colour key on your remote control to

confirm you have read the message. > Once you have confirmed, the message will not pop up

again. If however, you want to see the last broadcasted announcement again, select Announcement in the Software upgrade menu.

This allows you to reset most of the predefined factory states.

1. Select and press the cursor right.

2. Press the

OK key to erase settings and reset them to their

default values.

How to upgrade the TV software

Reset the Factory settings

Info

TV menu

Installation

Factory settings

Reset

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Info

TV menu

Installation

Software upgrade

Current softw. info

Local upgrades

Announcement

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Note: as long as the software upgrade has not been executed, the message will be available.

2584.3 en.qxd 29-03-2007 10:48 Pagina 31

Create your favourite list

MHEG CANCEL

†

‡

FAV

1. Press the FAV key (or the OK key). > The last selected channel list appears.

2. Use the cursor up/down to select a channel.

3. Press the

OK key to display the selected channel.

1. Press the

FAV key.

> The last selected channel list appears.

2. Press the red colour key to bring up the list of possible favourite channel lists.

3. Use the cursor up/down to select a list.

4. Press the

OK key.

5. Press the

FAV key again to exit.

1. Press the

FAV key.

> The last selected channel list appears.

2. Press the red colour key. > A list with all possible favourite channel lists appears.

3. Use the cursor up/down to select a Favourites (1 to 4) channel list.

4. Press the

OK key.

5. Press the green colour key to enter the Edit mode.

> The selected Favourite list will bring up a full channel

list.

6. Use the cursor up/down to select a channel.

7. Press the

OK key to check or uncheck the highlighted

channel and to add it to or remove it from your selected favourite list.

8a. < Press the green colour key again to leave the Edit mode.

> The modified favourite channel list appears. < Press the

FAV key again to exit.

> With the

–P+ key you will be able to browse through

the TV channels of the selected list.

8b. Press the red colour key to remove the channel list.

Note: when this key is pressed the first time after you have finished the installation, it will bring up the full channel list. In other situations it will bring up the last selected channel list.

Note: with the digit keys you can still select channels which are not marked as favourite.

To select a channel from the displayed favourite list

To select another favourite channel list

To create a favourite list or to modify the list

Favourites 1

EXT1

HDMI

2 Digital channel 1

Digital channel 2

Radio channel 1

5 Data channel 1

Exit

Leave edit

Press the OK key to mark /

All channels

All

TV channels Radio channels Anal

ogue Favourites 1 Favourites 2

Favourites 3

Favourites 4

Change list

All channels

1 Analogue channel 1 2 Digital channel 1 3

Digital channel 2

4 Radio channel 1

5 Data channel 1

Change list

Tune to a channel by pressing OK.

1 Analogue channel 1

HDMI

unmark.

Use -P+ for page up/down.

Use cursor up/down to select and OK to confirm.

This allows you to select up to four favourite channels lists with your preferred TV channels and radio stations. For example, each member of your family can create his/her own favourite list. In addition to the favourite channel lists you may also select a list with only digital TV channels or a list with only the radio channels or a list with only the analogue channels.

2584.3 en.qxd 29-03-2007 10:48 Pagina 32

Create your favourite channels list (Continued)

EPG (Electronic Programme Guide)

(only with Digital TV channels)

The Electronic Programme Guide shows you detailed information about the current programme and also about the next programme (only for TV programmes that provide EPG information).

1. Press the a key. > The EPG screen appears. Dependent on conditions it

may take some time to acquire EPG data.

> The EPG screen updates automatically if the EPG data is

acquired successfully. If not, the EPG screen remains blank.

> Information about the selected programme appears.

< Use the coloured keys to activate the available EPG features

displayed at the bottom of the screen.

2. To quit the Electronic Programme Guide, press the a key again.

When the type of Electronic Programme Guide available, displays a list of TV programmes (for UK only):

1. Use the cursor up/down to select a desired TV programme. > Information about the selected programme appears.

Note: these instructions may differ according to the type of Electronic Programme Guide.

Television

Multimedia

TV menu

Channel list

Programme Guide

Tips:

- press the blue colour key on the remote control to view more information (not currently displayed) about the selected programme.

- to quit the display of detailed information, press the blue colour key again.

DVD STB TV VCR AUX

SELECT

DEMO

BROWSE

OPTION

When the All channels list is displayed or selected you may filter the list and select a list with only the TV channels or a list with only the radio channels.

1. Press the

FAV key.

> The last selected channel list appears.

2. Press the cursor left.

3. Select the All channels list and press the cursor right.

4. Press the red colour key to filter.

5. Select your desired channels list.

6. Press the

FAV key again to exit.

> With the

–P+ key you will be able to browse through

the TV channels of the filtered list.

Note: the filtering will not be remembered after the TV is switched off or set to standby.

To select only TV or only radio channels on the All channels list

2584.3 en.qxd 29-03-2007 10:48 Pagina 33

EPG (Electronic Programme Guide) (Continued)

2. Press the green colour key on the remote control to watch/listen to the selected programme currently on air.

3. Press the red colour key to mark/unmark a reminder on the selected programme. You can set up to a maximum of 10 reminders. > The TV will wake up automatically or display a message

when the programme is about to start. Follow the instructions on screen to watch the programme.

4. Press the yellow colour key to jump to the

Next or the

Previous day or back to Today.

5. Press the

MENU/BROWSE key, while Programme Guide is

active, to activate the Programme Guide main menu.

° Use the cursor up/down to highlight and select a menu

item.

What's on allows you to browse through the

programme guide information of your preferred EPG channels.

Search by genre allows you to search for the

programmes according to a selected genre.

Scheduled reminders allows you to view and change the

reminders you have set.

- Preferred EPG channels are the channels from which the EPG data is currently being acquired.This menu allows you to mark/unmark ( up to 50) preferred EPG channels.

Acquire EPG data allows you to update the information

for the preferred programme guide channels. Follow the instructions on screen.

6. To quit the Electronic Programme Guide, press the a key again.

Tips:

- the EPG screen will not include TV channels which are not in the Preferred channel list or which are uninstalled (See Rearrange menu).

- new added channels ( via reinstallation or installation) will have to be marked in the preferred EPG channel list before you can see EPG data.

Note: the reminder(s) will wake up your TV from standby only if you switched off your TV with the Bkey on your remote control.

Note: after the installation of your channels, by default 40 channels with available EPG data will automatically be marked as preferred EPG channel.

Note: Acquisition of EPG data is done automatically while watching TV.

Programme Guide What’s on

12:00 South today

13:30 Working lunch

12:30 Brainteaser

12:00 This is BBC THREE

.........

Info

DVD STB TV VCR AUX

SELECT

DEMO

BROWSE

OPTION

What’s on

Search by genre

Scheduled reminders

Preferred EPG chann..

Acquire EPG data

2584.3 en.qxd 29-03-2007 10:48 Pagina 34

The Multimedia browser lets you display pictures or play audio files stored on a USB device.The Multimedia browser application is invoked from the main menu.

-Following file formats can be reproduced: for pictures: JPEG for audio: MP3, MP3 Pro, LPCM

- Only FAT/DOS-formatted memory devices are supported.

- Philips can not be held responsible if your USB device is not supported.

To insert a USB device

In case of a USB-memory stick or a digital camera, connect it to the USB connector at the side. See To make video and audio connections, Side panel overview, p. 42. When a USB device is inserted, the Multimedia browser menu is displayed automatically. See further.

To r emove the USB device

1. Press the MENU/BROWSE key on the remote control to

switch off the main menu.

2. Remove the USB device.

Multimedia Browser

To view content from a USB device

Tip: if your USB device does not fit into the USB connector at

the side, use an USB extend cable to connect the USB device to the USB port.Ask your dealer for more information.

Note: USB devices are not supplied with this TV.

DVD STB TV VCR AUX

123

456

SELECT

DEMO

BROWSE

OPTION

BROWSE

2584.3 en.qxd 29-03-2007 10:48 Pagina 35

Following icons may appear:

folder self made playlist/album

pictures

music

Multimedia Browser menu

1. Insert a USB device.

2. Select the USB device under Multimedia with the cursor

up/down. > The Multimedia browser allows you to browse content

stored on the inserted USB device.

> The 2-panel browser will be shown with the left panel

containing the content types (Music, Pictures).

> The right panel will display the content that is available

of the selected content type.

3. Press the cursor right to enter the content.

4. Press the cursor up/down to select a content.

5. Press the cursor right to enter the content.

6. Press the cursor up/down to select a file or a directory.

7. In case a file is selected, press the

OK key to display a

picture file or to play an audio file. In case a directory, album or playlist is selected, press the cursor right to enter the content or press the

OK key

to start a slide show or a loop playback of the files present.

8. Press the cursor left to keep music playing and switch back

to the Multimedia menu.

9. Press one of the colour keys on the remote control to

perform the corresponding function mentioned at the bottom of the screen.

10. To stop playing content, press the ‡ key on the remote

control.

Multimedia Browser (Continued)

Note:press the green colour key to display all the image

files in the current directory as thumbnails when browsing pictures. Press the green key again to display the image files in a list.

Tip: the blue colour key can, if necessary, be used to let the colour keys reappear.

Notes:

-your TV supports slide shows with background music. See Annex 2, Philips TV-slideshow format with background music, p. 58;

- the playback will continue to play even if temporarily switched to browser screens.The audio will be stopped when another song starts playing, or when the end has been reached;

- more technical remarks can be found in Annex 3, Philips TV-Digital camera and USB issues, p. 60.

USBDevice 1

Music

Picture

London 2005

The Beatles

Xmas2004.alb

arnold.jpg

USBDevice 1

Picture

London2005

The Beatles

Xmas2004.alb

arnold.jpg

London 2005

pic001.jpg

pic002.jpg

pic003.jpg

pic004.jpg

USBDevice 1/Picture/London2005

London2005

pic001.jpg

pic002.jpg

pic003.jpg

pic004.jpg

pic001.jpg

USBDevice 1/Picture/London2005

London2005 pic001.jpg

Press OK to play.

Television

Multimedia

TV menu

Channel list

Programme guide

USB device

2584.3 en.qxd 29-03-2007 10:48 Pagina 36

373737

Function keys at the bottom of the screen

Details to display a description of the selected file

or directory

Transitions to select if you like to apply a transition

during a slide show

Slide time to select the duration a picture will be

displayed in a slide show

Rotate to rotate a picture

Repeat one/all to repeat the playback of a music file

Shuffle to shuffle music collections in a random way

Zoom to select one of the zoom magnifications

(x1, x2, x4) with the cursor up/down.

Additionally you can shift the selected zoom window over the screen with the cursor keys.

Full/small screen to toggle between a full or a small screen

Multimedia function keys on the remote control

Ò to fast rewind displaying content ‡ to stop playing content π - to play a single file, start a slide show, playback of a

folder or other collection

- to pause playing content

† to fast forward displaying content

Multimedia Browser (Continued)

MHEG

CANCEL

†

‡

FAV

MHEG

CANCEL

†

‡

Note: to rotate a picture or to select one of the zoom magnifications, first stop the slide show with the

key or

the blue colour key.

2584.3 en.qxd 29-03-2007 10:48 Pagina 37

383838

Teletext

Most TV channels broadcast information via teletext. This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time.After each programme change, the memory is refreshed.

< Press b to switch the teletext on.

> The main index page appears on the screen.

Select a Teletext page

< Enter the desired page number with the digit keys or with

the

-P+ key.

< Select the options at the bottom of the screen with the

colour keys.

Previous selected teletext page

< Press the 0 key.

Select T.O.P. teletext broadcasts

< Press i.

> A T.O.P. overview of the teletext subjects available is

displayed.

< Select with the cursor up/down, left/right the desired

subject and press the

OK key.

Select subpages

When a selected teletext page consists of different subpages, a list of available subpages appears on the screen. Press the cursor left or right to select the next or previous subpage.

Picture/Teletext

1. Press the b key.

2. Press the b key to show Teletext on the right of the screen.

3. Press the b key to return to a full teletext picture.

4. Press the b key to return to a full screen picture.

Note: not all TV channels broadcast T.O.P. teletext.

Note:Teletext is not available via equipment connected to the

HDMI

connector.

DVD STB TV VCR AUX

123

456

789

SELECT

DEMO

BROWSE

OPTION

MHEG

CANCEL

†

‡

FAV

2584.3 en.qxd 29-03-2007 10:48 Pagina 38

393939

Teletext (Continued)

Hypertext

With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page.

1. Press the

OK key to highlight the first word or a number

on the page.

2. Use the cursor up/down, left/right to select any other word or number you want to search for.

3. Press the

OK key to confirm. The search starts.

> A message appears at the bottom of the screen to

indicate the searching, or that the word or page is not found.

4. Use the cursor up until the top of the page to exit hypertext.

Enlarge a Teletext page

< Press the OPTION key on the remote control repeatedly

to display the upper teletext part, the lower teletext part and then to return to the normal teletext page size.

The Teletext menu offers various functions to control teletext.

1. Switch teletext on and press the

MENU/BROWSE key to

activate the menu.

2. Press the cursor up/down to select the menu items.

3. Press the

OK key to activate.

4. Press the

MENU/BROWSE key to leave the teletext

menu.

Reveal

Reveals/conceals hidden information on a page, such as solutions to riddles and puzzles.

Cycle subpages (if subpages are available)

Makes the subpages cycle automatically.

< Press the

OK key to activate and to deactivate again.

Language

If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster, you can change the language group here.

< Select

Gr. I or Gr. II with the OK key.

Reveal Off

Cycle subpages Off

Language Gr. II

Teletext menu

DVD STB TV VCR AUX

SELECT

DEMO

BROWSE

OPTION

2584.3 en.qxd 29-03-2007 10:48 Pagina 39

404040

Teletext (Continued)

DVD STB TV VCR AUX

123

456

789

SELECT

DEMO

BROWSE

OPTION

MHEG

CANCEL

†

‡

FAV

Some digital channels offer dedicated digital text services (for instance BBCi).

1. Press b to switch Digital text on.

2. To use the digital text, follow the instructions on screen.

3. Depending on the service, you may be asked to use the cursor keys, the

OK key, the coloured keys, the teletext key

and sometimes the digit keys.

4. When you have finished watching teletext, select a different channel with the

-P+ keys or follow the instructions on

screen to return to picture.

5. Press ‡

MHEG CANCEL to cancel the digital text or

interactive services.

Te xt info

Some digital channels also offer information on the programme being broadcast. In that case a message may appear at the bottom of the screen for a few seconds. Follow the instructions on screen and use the cursor keys to scroll through the next pages.

Note: UK only: digital text is displayed when programmes are carrying digital text or interactive services.

Note: digital text will not be available when Subtitles are set to On in the Features menu.

Digital text (only for UK)

2584.3 en.qxd 29-03-2007 10:48 Pagina 40

414141

To make video and audio connections

Tip: use the inputs that are available on your equipment that provide the best video or audio

performance, as below.

Note:your TV comes with all types of connectors with the exception of the DVI connector but some of your equipment may be equipped with this type. In this case you'll need a DVI to HDMI adapter or a HDMI to DVI cable and separate audio cables, all available at your local dealer. Warning: be sure to connect the DVI output connector first, then connect to the HDMI input on your TV.

Notes:

- cables are often colour-coded to connectors. Connect red to red, white to white....

- component video (YPbPr) connection is necessary to view video sources, for example digital broadcastings coming from a settop box, in 1080i, 720p, 576i, 576p, 480i or 480p.

L/R

EXT3

AUDIO L / R

L/R

EXT3

AUDIO L / R

S-VIDEO

HDMI

VIDEO

EUROCONNECTOR

PrPbY

RBG

AUDIO L/R

PrPbY

EXT3

Connector cable

HDMI (High-Definition Multimedia interface)

Ye s

RGB H/V

Component video (480p/576p/720p/ 480i/576i/1080i)

Scart

S-Video

Video

RF/Coaxial

Audio connection required

Best video performance

2584.3 en.qxd 29-03-2007 10:48 Pagina 41

424242

Camera, Camcorder, Game

1. Connect your camera, camcorder or game as shown.

2. Connect to

VIDEO 2 and AUDIO L 3 for

mono equipment. For stereo equipment also connect

AUDIO R 3.

S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the

S-VIDEO input 1 and AUDIO inputs

Headphone

1. Insert the plug into the headphone socket L as shown.

2. The headphone impedance must be between 8 and 4000 Ohm.The headphone socket has a

3.5 mm jack. In the Sound menu select Headphone

volume to adjust the headphone volume.

USB

See Multimedia browser, p. 35.

To make video and audio connections - Side panel overview

USB

Warning: do not connect cable 1 and 2 at the same time.This may cause picture distortion !

Tip:Press ¬ on the remote control to switch off the internal loudspeakers of the TV.

2584.3 en.qxd 29-03-2007 10:48 Pagina 42

To make video and audio connections - Rear panel overview

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

DIGITAL AUDIO IN L o AUDIO OUT o R

o DIGITAL

oooo

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

COMMON INTERFACE HDMI 1 HDMI 2 ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o ROUT AUDIO

o DIGITAL

oooo

VGA

DVI

CABLE

VCR

DVD player

Satellite receiver

1 DVD recorder - 1 VCR

2 DVD recorders

2 VCRs

Decoder

PC DVI

PC - VGA

DVD player

HD receiver

DVD player

HD receiver

VCR

Decoder

Digital

Home Cinema

amplifier

Analogue

Home Cinema

amplifier

Analogue

Home Cinema

amplifier

Game console

2584.3 en.qxd 29-03-2007 10:48 Pagina 43

T AUDI

444444

EXT2 EXT1

ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

o o

EXT

1 / 2

CABLE

RECORDER

With a eurocable

1. Connect the aerial cables 1 and 2 as shown.

2. Connect the eurocable 3 as shown.

3. Make your selection of the source to which the VCR has been connected in the Installation menu, Select your connections, p. 30.

With the aerial cable only

1. Connect the aerial cables 1 and 2 as shown.

2. Tune in your recorder’s testsignal and store the testsignal under programme number 0. See Analogue: manual installation, p. 27. See also the handbook of your recorder.

Connect a decoder and a VCR

Connect a eurocable 4 to your decoder and to the special euroconnector of your recorder. See also the handbook of your recorder.

Warning: do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display. Keep a minimum distance of 0,5 m from the screen.

ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

o o

RECORDER

CABLE

RECORDER DECODER

Tip:you can also connect your decoder directly to EXT1 or EXT2 with a eurocable.

Connect a VCR or DVD recorder

2584.3 en.qxd 29-03-2007 10:48 Pagina 44

454545

EXT2 EXT1

ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o ROUT AUDIO

o DIGITAL

o o

RECORDER

CABLE

RECORDER

EXT 1/2

EXT2 EXT1

ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

o o

EXT

1 / 2

Connect two VCRs or VCR and DVD recorder

With eurocables

1. Connect the aerial cables 1 and 2 as shown.

2. Connect your VCRs or DVD-recorder to

EXT1 and 2 with the eurocables 4 and 5.

3. Select the equipment you have connected in the Installation menu, Select your connections, p. 30, and link it to

EXT1 or 2.

With aerial cables only

1. Connect the aerial cables 1, 2 and 3 as shown.

2. Tune in your recorder’s testsignal and store the testsignal under programme number 0. See Analogue: manual installation, p. 27. See also the handbook of your recorder.

With a eurocable

1. Connect the aerial cables 1 and 2 as shown.

2. Connect your satellite receiver to

EXT1 or 2

with a eurocable 3.

3. Select the equipment you have connected in the Installation menu, Select your connections, p. 30, and link it to

EXT1 or 2.

With Component Video connectors

See Connect a DVD player, a satellite receiver or a HD receiver, p. 47.

Connect a satellite receiver

Note:you can not record signals from equipment connected to the YPbPr input.

2584.3 en.qxd 29-03-2007 10:48 Pagina 45

464646

Connect a DVD player, HD receiver or game console

Note: in case of any problems, see Annex 4:

Issues referring to connected peripherals with a HDMI connector, p. 61.

With a HDMI connector

HDMI is the leading new standard for Digital video and audio interconnection.

1. Connect your equipment with the HDMI connector.

2. Select the equipment you have connected in the Installation menu, Select your connections, p. 30, and link it to

HDMI 1 or 2.

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

HDMI 1 HDMI 2 ANTENNA

ooo

HDMI 1/2

HDMI

Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

Connect a DVD player or HD receiver

With a DVI connector

1. Connect the DVI to HDMI cable to one of the HDMI connectors of your TV 1.

2. Connect the audio cable 2 to the

DIGITAL

AUDIO IN

connector of the TV.

3. Select the equipment you have connected in the Installation menu, Select your connections, p. 30 and link it

HDMI 1 or 2.

4. Also select DIGITAL AUDIO IN in the same Connections menu.

Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

Note: only a DVD player with DVI with digital

sound can be connected to the HDMI connector.

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

HDMI 1 HDMI 2 ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

o ooo

HDMI

DVI

DIGITAL AUDIO IN

2584.3 en.qxd 29-03-2007 10:48 Pagina 46

Connect a DVD player, a satellite receiver or HD receiver

4747

With Component Video Connectors

1. Connect the three separate component video cables 1 to the YPbPr jacks on the DVD player and to the Y, Pb and Pr jacks of

EXT3

on the TV.

2. Connect the audio cable 2 to the digital out of the equipment and to the

DIGITAL

AUDIO IN

connector of the TV.

3. Select the equipment you have connected in the Installation menu, Select your connections, p. 30. Also select DIGITAL AUDIO IN in the same Connections menu and link it to

EXT3.

4. In case of a DVD player with analogue audio, connect the audio cable to the DVD’s audio

and R jacks and to the L/R AUDIO jack of

EXT3 3.

5. In case of a HD receiver and/or a satellite receiver also connect the cable TV cable and/or the satellite antenna cable 4 and the aerial

Tip: if necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

Notes:

- cables are often colour coded. Connect red to red, white to white, etc..;

- the labels for the component video sockets may differ depending on the DVD player connected. Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s instructions for use for definitions and connection details;

- to get an optimal viewing, it is advised to switch your equipment to the highest possible supported display modes.

Warning: in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, verify if the connections are done in the correct way and if the resolution and the signal standard of the connected equipment are set in the right way. See the handbook for your equipment.

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

DIGITAL

AUDIO

EXT3 : YPbPr

EXT3 : AUDIO L/R

DVD

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

DIGITAL AUDIO IN L o AUDIO OUT o ROUT AUDIO

o DIGITAL

ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

DIGITAL

AUDIO

EXT3 :

YPbPr

EXT3 : AUDIO L/R

SAT / STB

CABLE

2584.3 en.qxd 29-03-2007 10:48 Pagina 47

Connect a PC

4848

Notes:

- only a PC with digital sound can be connected to the HDMI connection;

- if your PC does not have digital sound output, connect your PC via a VGA connector;

- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 60 Hz;

- supported PC monitor modes: VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768

PC equipped with a DVI connector:

1. Use a DVI to HDMI cable to connect to one of the

HDMI connectors of your TV 1.

2. Connect the audio cable 2 to the

DIGITAL

AUDIO IN

connector of the TV.

3. Select the equipment you have connected in the Installation menu, Select your connections, p. 30, and link it to

HDMI 1 or 2.

4. Also select DIGITAL AUDIO IN in the same Connections menu.

PC equipped with a VGA connector:

1. Use a VGA to RGB H/V cable 1 to connect to the

RGB H/V connectors of your TV.

2. Connect the audio cable 2 to the

AUDIO R

(right) and L (left) inputs of the TV.

3. Select the equipment you have connected in the Installation menu, Select your connections, p. 30.

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

EXT3 :

RGB H/V

EXT3 : AUDIO L/R

VGA

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

HDMI 1 HDMI 2 ANTENNA

DIGITAL AUDIO IN L o AUDIO OUT o ROUT AUDIO

DIGITAL

o ooo

HDMI

DVI

DIGITAL AUDIO IN

2584.3 en.qxd 29-03-2007 10:48 Pagina 48

494949

Connect a Home Cinema amplifier

Digital Home Cinema amplifier

< Connect a digital Home Cinema amplifier to

the

DIGITAL AUDIO OUT connector 1 at

the bottom of the TV.

Analogue Home Cinema amplifier

< According to the type of connector cables and

the connector input available on your Home Cinema amplifier, connect your receiver to the

AUDIO OUT L and R connectors 3 or to EXT1 or 2 2 at the bottom or the rear of

the TV.

Tip: to avoid visible delay between picture and sound, use this

DIGITAL AUDIO OUT

connector to connect your Home Cinema amplifier.

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

DIGI

PrPbY

RBG

AUDIO L/R

EXT2 EXT1

EXT3

DIGITAL AUDIO IN L o AUDIO OUT o R OUT AUDIO

o DIGITAL

L o AUDIO OUT o R

EXT

1 / 2

AUDIO

OUT

AUDIO

OUT

2584.3 en.qxd 29-03-2007 10:48 Pagina 49

505050

To r eceive scrambled DTV signals you will need a CA (Conditional Access) module and a Smart card provided by the service provider. A CA module can enable additional services, for example Pay TV. Contact your Common Interface service provider to get more information about these modules. Although CA module types may vary dependent on the manufacturer, each one of the CA modules supports a certain kind of encryption system.Your TV supports CA modules to work with the DVB-T standard. Note that a smart card may only be valid for a single broadcast channel. CA modules and smart cards are neither supplied nor optional accessories from Philips. The CA module is responsible for the messages and texts on screen. In case of failure or strange behaviour, you must call your CI service broadcaster.

Insert a CA module

< Insert the specified Conditional Access module

into the Common Interface slot as far as it will go. It may take a few minutes before the CA module is activated and service information is downloaded.

To access common interface applications, see TV menu,Adjust feature menu settings, Common Interface, p. 23.

COMMON INTERFACE HDMI 1

COMMON INTERFACE

HDMI 2

COMMON INTERFACE

TOP

Use the Common Interface slot

Warning:switch off your TV before any module is inserted in the Common Interface slot.

Warning: when you connect the CA module

incorrectly, it may damage the card and the TV. After inserting a card, leave it in the slot permanently. Do not remove it from the slot unless asked to do so. For example, your card has to be in the slot when your CI service broadcaster wants to download new information to the smart card. Once the CA module is removed, your TV will no longer decrypt scrambled digital DVB-T channels.

Note: this functionality is only available in certain countries.

2584.3 en.qxd 29-03-2007 10:48 Pagina 50

515151

Before operating your connected equipment you have to make a selection in the Installation, Select your connections menu, p. 30.

1. Press the

MENU/BROWSE key.

2. Select TV menu and press the cursor right.

3. Select Installation.

4. Press the cursor right.

5. Select Connections.

6. Press the cursor right.

7. Select the input to which the peripheral equipment is connected.

8. Press the cursor right again to enter the list of types of peripherals connected to the selected input

9. Select the peripheral equipment with the cursor up/down.

Select connected equipment

Record a TV programme

You can record a TV programme using your recorders tuner without affecting your TV.

1. Select the channel number on your recorder.

2. Set your recorder to record. See the handbook for your recorder.

Note: when recording analogue progammes, switching channel numbers on your TV does not disturb recording !

Note: to record digital programmes to an analogue recorder, the TV needs to be switched on and tuned to that digital programes.

Record with your recorder

123

456

BROWSE

OPTION

BROWSE

2584.3 en.qxd 29-03-2007 10:48 Pagina 51

525252

Most of the audio and video equipment from our range of products can be operated with the remote control of your TV.

Press one of the keys after you pressed the

SELECT key

repeatedly according to the equipment you want to operate with this remote control. See Use of the remote control, p. 5-6.

B to switch to standby ® for record, Ò for rewind (

VCR, CD);

search down (

DVD )

‡ for stop, π for play,

for pause,

† for fast forward (

VCR, CD);

search up (

DVD )

i to display information

MENU/BROWSE to switch the menu on or off

- P + for chapter, channel, track selection

0 to 9 digit entry,

cursor up/down

to select the next or the previous disc (CD)

cursor left/right

to select the previous or following track (

CD)

0 to select a DVD title/chapter;

index (

AUX)

b to select your choice of

subtitle language (

DVD )

Audio- and video equipment keys

DVD STB TV VCR AUX

123

456

789

SELECT

DEMO

BROWSE

OPTION

MHEG

CANCEL

†

‡

FAV

Notes:

- If no action is being undertaken within 60 seconds, the

remote control returns to TV mode.

- After an action in the selected system mode, the remote

control will remain in this mode for 60 seconds and will then return to TV mode or press the

SELECT

key to

return to TV mode immediately.

2584.3 en.qxd 29-03-2007 10:48 Pagina 52

ENTroubleshooting

Symptom Possible cause/Remedy

No picture < Verify if the supplied cables are connected properly. (The aerial cable to the

TV, the other aerial to your recorder, the power cables, ..)

< Verify if you selected the correct source. < Verify if the child lock has been switched off.

Poor picture < Verify in the Manual installation menu if you have selected the correct TV

system.

< Verify if your TV or house aerial isn't located too close to loudspeakers,

non-earthed audio equipment or neon lights, etc.

< Mountains or high buildings can cause double pictures or ghost images.

Sometimes you can improve the picture quality by changing the direction of the aerial.

< Is the picture or teletext unrecognisable or do you experience bad teletext

reception ? Verify if you have entered the correct frequency, or fine tune the frequency for that specific channel or adjust the antenna direction if the problem isn’t solved by finetuning.See Installation,Analogue: manual installation,p. 27

Poor colour < Select Factory settings in the Installation menu.

< Verify the connections between the optional equipment and the TV.

No sound < Verify if the volume isn't at minimum.

< Verify if the sound hasn't been muted with the ¬ key.

Verify the connections between the optional equipment and the TV.

Sound and picture < If it occurs occasionally, perhaps there is something wrong with the broadcasted interruptions using programme. HDMI to HDMI < If it occurs persistently, see the manual of your connected equipment to verify the connection necessary adjustments.

< Alternatively, connect an extra audio cable (either an analogue or a digital audio

cable) from your connected peripheral to your TV. Verify whether you selected the connected equipment in the Installation menu, Select your connections and also select the respective audio input in the same Connections menu.

Note:An analogue audio cable must be linked to HDMI 2.

< Limit the HDMI cable length to max 5 m. < Verify if the connected equipment is properly selected in the Installation menu,

Connections, according to the connection you have made HDMI 1 or 2.

No sound when < Verify whether you properly connected the audio cable to the DIGITAL AUDIO using DVI to HDMI IN connector of the TV. connection < Verify whether you selected the connected equipment in the Installation menu,

Select your connections and if you linked it to HDMI 1 or 2 according to where you made the connection. Also verify if you selected digital audio in in the same Connections menu.

No digital channels < Contact your dealer about Digital Video Broadcasting Terrestrial signal availability

in your country.

No subtitles < Under certain circumstances Digital text or interactive services may have priority (UK ONLY) over subtitles.This can result in the subtitles not automatically reappearing when

leaving Digital text or interactive services on a channel which is broadcasting subtitles. In these cases subtitles can be initialised, either by toggling the OPTION or the MENU key on the remote control or by changing channel.

2584.3 en.qxd 29-03-2007 10:48 Pagina 53

Symptom Possible cause/Remedy

The remote does <

Verify if the remote is set correctly for the equipment your are using.

not function < Verify if the batteries are not dead. Replace the batteries.

You can still use the keys at the left side of the TV.

< Select TV mode on your remote control. < When pressing a key and some key leds are blinking with a higher speed and

lower intensity than in a normal working condition, and your TV does not react on the key press,remove the batteries out of the remote control and put them back again.

The remote of < The infrared signals of the screen may influence the reception sensibility connected equip- of other peripherals. ment does not Solution: replace the batteries of the remote of other peripheral function well equipment.

No photo or music < Verify if the source complies with a supported code. play or in poor quality

No stable or not < Verify if you have selected the correct VGA mode in your PC. synchronised VGA See Connect a PC, p. 53. picture < Verify the connections between the TV and the PC.

No solution found < Switch off your TV off and then on again once. for your picture or Never attempt to repair a defective TV yourself. sound problem Verify with your dealer or call a TV technician.

Red blinking led < Unplug the mains cord for 10 seconds and insert it in again.

Black bars with < Select another picture format.

HD channels

No EPG data <

The Electronic Programme Guide function and background programme

available

information are only made available by TV channels that provide EPG information and in countries which support EPG. See www.philips.com/support.

Troubleshooting (Continued)

2584.3 en.qxd 29-03-2007 10:48 Pagina 54

Annex 1 - Philips TV software upgrade with portable memory

Info

TV menu

Installation

Software upgrade

Current softw. info

Local upgrades

Announcement

.............

Time zone

Channels

Preferences

Connections

Decoder

Factory settings

Software upgrade

Introduction

Philips continuously tries to improve its products and it wants you to profit of that even after your purchase. Therefore it allows you to upgrade your TV software using a USB memory device (not supplied). You can execute the software upgrade procedure yourself.

Before starting the software upgrade procedure, it is advised to check what your current TV software is.

1. Select Software upgrade in the Installation menu.

2. Press the cursor right. The Software upgrade menu moves to the left panel.

3. Select Current software info to observe the version and the description of the current software.

What do you need ?

• A personal computer with web browsing capability.

• An archive utility that supports the ZIP-format (e.g.

WinZip for Windows).

•A preferably empty USB portable memory.

New software can be downloaded from the www.philips.com/support website.

1. Insert a USB portable memory device into a PC linked to the internet.

2. Go to www.philips.com/support.

3. Choose your country or area/language.

4. Enter your model number.

5. In the Search results, click on the model number.

6. Under Product support, click on Software and drivers.

7. Click on the Firmware Upgrade zip file.

8. Click on the Download arrow in the upper left corner of your screen.

9. Save the latest software upgrade file to your computer.

10. Double click on the zip-file and copy the file “autorun.upg” to the root directory on the USB portable memory.

Verifying the version of the TV software

Preparing a USB portable memory for software upgrade

Note: Only FAT/DOS-formatted portable memory is

supported.

Note: Only use software upgrades that can be found on the www.philips.com/support website.

2584.3 en.qxd 29-03-2007 10:48 Pagina 55

Upgrade the TV software

1. Switch off your TV and remove all memory devices.

2. Insert the USB portable memory that contains the downloaded software upgrade.

3. Switch on your TV with the power key B at the side of the TV.

4. The upgrade process starts automatically.After a few seconds the status of the upgrade procedure is displayed.

5. When the message Operation successful appears, remove the USB portable memory and restart your TV with the power switch B at the side of the TV. Your TV will start up with the new software.

Annex 1 (Continued)

Warning:

-You are not allowed to remove the USB portable memory during the software upgrade procedure;

- In case of a power drop during the upgrade procedure, don’t remove the USB portable memory from the TV. The TV will continue the upgrade as soon as the power comes back;

- If an error occurs during the upgrade you should retry the procedure or contact your Local Customer Service Centre.

Note: once the upgrade is finished use your PC to remove the TV software from your USB portable memory.

Software Id: TL32E-234

Loading Done

Validating Done

Programming

Software Upgrade Application

Upgrade busy...

If you need further assistance or in case of problems, please call your local Philips Customer Centre. See Philips Consumer Care on the www.philips.com/support website.

2584.3 en.qxd 29-03-2007 10:48 Pagina 56

Local software upgrade procedure

New software, or the currently installed software version, can also be obtained from the www.philips.com/support website.

1. Go to www.philips.com/support using the web browser of your PC.

2. Follow the procedure to find the information and the software related to your TV.

3. Select the latest software upgrade file and download it to you PC.

4. Decompress the ZIP-file. Rename the resulting file “autorun.upg” to for ex. “upgrade.upg”. Move the renamed file to the subdirectory “Upgrades”.

5. Insert the portable memory that contains the downloaded software upgrade.

6. Select Software Upgrade in the Installation menu. Go to Local upgrades. The TV will list all compatible software available on the USB portable memory and display the data for each selected upgrade version.

7. Select the correct upgrade version and press the red colour key to start the upgrade. Your TV will restart and will automatically go to the upgrade mode.After a few seconds it will display the status of the upgrade procedure.

8. When the software upgrade was successful, remove the USB portable memory and restart your TV with the power switch B at the side of the TV.Your TV will start up with the new software.

Annex 1 (Continued)

Warning: if you try to upgrade to a software version

equal or lower than the current version, a confirmation will be asked. Downgrading to older software should only be done in case of real necessity.

Note: Only use software upgrades that can be found on the www.philips.com/support website.

Remark: if there is no subdirectory “Upgrades” present, please create one.

Info

TV menu

Installation

Software upgrade

Current softw. info

Local upgrades

Announcement

.............

Channels

Manual network i..

Preferences

Connections

Decoder

Factory settings

Software upgrade

2584.3 en.qxd 29-03-2007 10:48 Pagina 57

Annex 2 - Philips TV-Slideshow Format with background music

Introduction

This document explains how to make a Philips slideshow file with background audio. Be aware that the content of this document is addressing technical or software skilled users. To start the slideshow open the slideshow file in the Multimedia browser of your TV.

1. Press the

MENU/BROWSE key on the remote control after having inserted a USB device and

switched on the TV.

2. Go to where you stored the slideshow file (.alb) on your portable memory.

3. Select the slideshow file and press the ok key to start the slide show.

4. To stop a slide show, press the ‡ key.

General Rules

- The slideshow will use plain ASCII XML syntax to allow the creation and editing of the slideshow files using simple tools.

- All references to network content must be based on the global address of the content.

- Content on a Portable Memory (PM) doesn't have a global address; as a result content from a PM can never be referenced from a slideshow not stored on the PM itself.

-To maintain portability, a slideshow stored on a PM should ONLY reference content on the same PM. Referencing global addresses can result in inconsistencies if the PM is used on a nonnetworked CE device. The latter is however not forbidden, it is only a recommendation.

- It is preferable that URL’s referencing PM content are based on a relative path starting from the directory where the slideshow is stored. This path includes the device or drive name of the PM. An absolute path to content will also be supported.

-relative path: pictures\test1.jpg, tamper.jpg, ..\new\bird.jpg, …

- absolute path: USB1:\pictures1\foo_bar.jpg, C:\f1.jpg, \organization.jpg, …

General Format

The format and syntax below will be used to create the slideshow file (simple ascii text) with the extension .alb (.ALB). Examples: slshow1.alb, summer_holiday_2004.ALB, test.alb, … The following syntax should be used to create the text file:

<?xml version="1.0" encoding="ISO-885h9-1" ?> <philips-slideshow version="1.0" >

<title>Title of the slideshow</title> <audio>audio_url</audio> <slide-duration>30</slide-duration> <slides>

<slide>slide_1_url</slide> <slide>slide_2_url</slide> <slide>slide_3_url</slide> <slide>slide_4_url</slide> <slide>slide_5_url</slide> <slide>slide_6_url</slide> ... <slide>slide_N-1_url</slide> <slide>slide_N_url</slide>

</slides>

</philips-slideshow>

Notes:

- the latest version of this document can be found on the Philips support website (www.philips.com/support). Use the type number of your TV to find this documentation and other related files.

- Philips can’t be held responsible for any problems that may occur as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.

2584.3 en.qxd 29-03-2007 10:48 Pagina 58

Annex 2 (Continued)

Supported XML-tags

The following table gives a description of the XML syntax.

Ta g Name

philips-slideshow

title

audio

slide-duration

slides

slide

Use

mandatory

optional

mandatory

optional

Description

Philips slideshow signature including the version.

The title of the playlist.

The audio-URL following this tag will define the music playing in the background during the slideshow. A single song or playlist (.m3u & .pls) are the only valid audio references. Other reference will not result in any audio playback. If a single song is referenced the song will be repeated forever. If a playlist is referenced the playlist will be played in sequence with a repeat at the end of the playlist.

The default display time (in 0,1 second) of a slide. The TV application isn’t obliged to support this tag. The TV application can force the use of one or multiple predefined display times.

Identifies the slides to show.

Identifies the URL of the individual slide.

2584.3 en.qxd 29-03-2007 10:48 Pagina 59

Annex 3 - Philips TV - Digital camera and USB issues

Digital Camera Issues

If a USB connection between your digital camera and the TV isn’t working, you can try the solutions below to resolve your problem.

- Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct (see the manual of your digital camera for more information).

- Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface is switched on before connecting to the TV.

- If you have a digital camera with only internal memory (no removable memory) you can try to copy the content manually to a USB memory device using a personal computer.

- Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link” and USB Mass Storage. Make sure that you select USB Mass Storage or “PC Drive” on your digital camera.

- If your camera supports different interface settings be sure to try them one by one or contact the reseller of your camera to find out the correct setting.

USB Memory Device Issues

-Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your device (digital camera. MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it will not be detected by the content browser of the TV.

- The following subsets of the Mass Storage Class specification are supported:

The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class Specification Overview” (v1.2, June 23, 2003) including all documents referenced by the document. The document can be found on the USB standardisation website (www.usb.org). Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h). Full support of SubClass Code = 05h; SFF-8070i spec. Full support of SubClass Code = 06h; SCSI transparent command set.

-For large USB memory devices, when you are in the Content Browser, it may take a long time before you can access your files.

- When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is advised to use the external power supply of the portable harddisk to guarantee proper working under all conditions.

Digital Content Issues

• Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting can result in unreadable content. If such problems appear try to re-format the card. Be aware that formatting the card will also delete all the content on it (pictures, music, …).

• The maximum size of any multimedia file should never exceed 4Gbyte.

• Do not use a dot “.” in folder naming.

• If video streams are supporting multiple audio tracks the first audio track will automatically be selected, the other audio tracks can’t be selected.

• External subtitle files (e.g. DivX.srt subtitle files) are not supported.

Notes:

- the latest version of this document can be found on the Philips support website (www.philips.com/support);

- the software of your TV is upgradeable. If you have problems first check if you have the latest software installed on your TV. The latest software, together with instructions, can be found on the Philips support website. Use the type number of your TV to find this documentation and other related files.

- Philips can’t be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.

2584.3 en.qxd 29-03-2007 10:48 Pagina 60

Annex 4 - Issues referring to connected peripherals with a HDMI connector

The HDMI IN connector allows the following TV and monitor display modes:

HD Standard Definition TV (SDTV) 640x480i

720x480i 720x576i

Enhanced Definition TV (EDTV) 640x480p

720x480p 720x576p

High Definition TV (HDTV) 1920x1080i

1280x720p

PC VGA 640x480

SVGA 800x600 XGA 1024x768

- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.

- Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the

HDMI input, the Digital audio output signal is muted.

-Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length to maximum 5 m.

- In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then on again.

Note:Teletext will not be available via equipment connected to a HDMI connector.

2584.3 en.qxd 29-03-2007 10:48 Pagina 61

active control ........................... 17

analogue: manual installation. 27

antenna......................................... 4

audio receiver .......................... 49

audio equipment keys............. 52

auto format............................... 17

automatic installation.............. 25

avl (audio volume leveller)..... 19

balance ....................................... 18

batteries ................................ 4, 63

brightness.................................. 15

camera ....................................... 42

camcorder................................. 42

care of the screen ..................... 2

change code ............................ 22

channel list........................... 12,32

child lock ................................... 21

colour......................................... 15

colour enhancement............... 17

colour keys.................................. 5

common interface slot...... 23,50

comp. video connectors.....47,49

connections............................... 41

contrast ..................................... 15

country selection..................... 25

cursor keys.................................. 5

custom tint................................ 16

decoder...................................... 30

delta volume............................. 19

demo .......................................... 23

digital audio language.............. 18

digital natural motion ............. 16

digital subtitle language .......... 20

digital teletext .......................... 40

digital: test reception .............. 26

digital TV ...................................... 8

DNR........................................... 16

dual I/II ....................................... 19

DVB-T .......................................... 8

DVD player.......................... 46,47

DVD recorder.......................... 44

DVI connector.................... 46,48

dynamic contrast ..................... 16

EPG............................................. 34

equalizer .................................... 18

euroconnector ............ 44, 45, 49

factory settings......................... 31

favourite channel list............... 32

features adjustment menu..... 20

fine tune..................................... 27

first time installation ................. 9

game...................................... 42,46

HDMI connector................ 46,61

headphone................................. 42

headphone volume.................. 19

hearing impaired...................... 24

home cinema amplifier........... 49

hue.............................................. 15

hypertext................................... 39

installation menu...................... 24

language preferences............... 24

light sensor ............................... 17

location...................................... 29

manual installation................... 27

menu key................................... 12

MHEG ........................................ 40

mono/stereo............................. 19

MPEG reduction ...................... 17

multimedia browser................ 35

mute key...................................... 6

navigate through the menus.. 12

on screen language.................. 10

on screen information.............. 6

on timer..................................... 22

OK key..........................................5

OPTION key................................7

PC ............................................... 48

picture adjustment menu....... 15

picture format.......................... 17

PIN code ................................... 22

pixel plus.................................... 16

preferences menu.................... 29

preferred audio language....... 24

preferred subtitle language.... 24

previous channel........................ 6

programme title....................... 29

quick access..................................7

radio channels .......................... 25

rear panel overview................ 43

rearrange channel list ............. 28

record a TV programme ........ 51

recycling..................................... 63

reinstall ...................................... 28

remote control....................... 5-6

reset factory settings.............. 31

reset to standard..................... 14

rename....................................... 28

reshuffle..................................... 28

safety warnings........................... 2

satellite receiver ...................... 45

search for channels................. 27

select your connections......... 30

select connected equipment. 51

set code..................................... 22

settings assistant...................... 11

side connectors ....................... 42

sharpness................................... 15

sleeptimer ................................. 21

slideshow format..................... 57

software upgrade ............... 31,55

sound adjustment menu......... 18

standby key.................................. 5

store channels.......................... 25

subtitles...................................... 20

surround mode........................ 19

switch the TV on........................ 9

teletext ...................................... 38

teletext menu........................... 39

teletext 2.5................................ 29

time zone selection................. 25

tint .............................................. 15

T. O.P. teletext pages................ 38

troubleshooting........................ 53

tv menu settings ...................... 13

uninstall...................................... 28

usb connector .......................... 42

usb device.................................. 35

video equipment keys............. 52

volume......................................6,18

VCR............................................ 44

Index

2584.3 en.qxd 29-03-2007 10:48 Pagina 62

Recycling

R The packaging of this product is intended to be recycled.Apply to the local authorities for correct disposal.

Disposal of your old product

Your product is designed and manufactured with highly quality material and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the

European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.

The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations.

Recycling

Product information

-Your TV consumes energy in standby mode. Energy consumption contributes to air and

water pollution.Very low standby power consumption.

- Specifications: see the product leaflet on www. philips. com/support.

- If you need further assistance, please call the customer support service in your country.

The corresponding telephone numbers and addresses are given in the supplied Worldwide guarantee

booklet.

Disposal of batteries

België / Belgique 070 222 303 €0.17/min

Danmark 3525 8760 Local

Deutschland 0180 5 356 767 €0.12/min

France 08 9165 0005 €0.23/min

E§§A™

0 0800 3122 1280 ¢ˆÚÂ¿Ó

España 902 888 784 €0.15/min

Ireland 01 601 1777 Local

Italia 199 404 041 €0.25/min

Luxembourg 40 6661 5644 Local

Nederland 0900 8407 €0.20/min

Norge 2270 8111 Local

Österreich 0820 901114 €0.20/min

Portugal 2 1359 1442 Local

Schweiz / Suisse / Svizzera 0844 800 544 Local

Svenska 08 5792 9100 Local

Suomi 09 2311 3415 Local

United Kingdom 0906 1010016 £0.15/min

2584.3 en.qxd 29-03-2007 10:48 Pagina 63

Philips 42PF7621D-10, 42PF7641D-10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual