Philips 32PW9588 User Manual

Contents

Installation

Help?

If this instruction manual does not give an answer or if ‘Tips’ do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline.

Model: 32PW9588

Product No: AG ....................................

R End of life directives

Philips is paying a lot of attention to producing environmentally-friendly in green focal areas.Your new TV contains materials which can be recycled and reused. At the end of its life specialised companies can dismantle the discarded TV to concentrate the reusable materials and to minimise the amount of materials to be disposed of. Please ensure you dispose of your old TV according to local regulations.

Preparation ...................................................................................... 2

Keys/LCD display on top of the TV ........................................... 3

Your remote control .................................................................. 4-5

To use the menus ............................................................................6

Select the menu language and country ..................................... 6

Store TV channels .......................................................................... 7

Automatic installation ............................................................7

Manual installation................................................................... 7

Give name ................................................................................. 7

Reshuffle the programme list................................................. 8

Select favourite TV channels ................................................. 8

Install TV setup ............................................................................... 8

Speakers .................................................................................... 8

General ...................................................................................... 9

Source ...................................................................................... 10

Decoder .................................................................................. 10

Demo .............................................................................................. 10

Operation

TV menu

Picture menu .......................................................................... 11

Sound menu ........................................................................... 12

Features menu....................................................................... 13

NEXTVIEW/Teletext guide ...................................................... 14-15

Teletext ..................................................................................... 16-17

RDS Radio ................................................................................ 18-19

Connect peripheral equipment

Connecting and selecting equipment .................................20-21

Audio and Video equipment keys ............................................. 22

Tips ................................................................................................ 23

EnglishDeutsch

Français

NederlandsItaliano

∂ППЛУИО¿

EasyLink features are based on the “one touch operation” approach. This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder, provided both are fitted with the EasyLink function and connected with the eurocable supplied with your video recorder.

Preparation

min.

75 ANTENNA

FM RADIO

& Place the TV on a solid surface.

! 32PW9588: 60 kg !

For ventilation, leave at least 5 cm free all around the TV. Do not place the TV on a carpet.To prevent any unsafe situations, do not place any objects on top of the TV. Avoid heat, direct sunlight and exposure to rain or water.

é Insert the aerial plug firmly into the aerial

socket x at the back of the TV. For best picture quality use the suppressor-aerial cable supplied.

“ Remote control: Insert the 2 batteries

supplied (Type R6-1,5V).

The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations.

‘ Insert the mains plug of the TV in the wall

socket having a mains voltage of 220V-240V.

( Switch the TV on :Press the power switch A

on the front of your TV. A blue indicator on the front of the TV lights up, the screen comes on and the LCD display smoothly and automatically pops up. If the indicator is red, press the

-P+ keys on the

remote control.

§ LCD display:When popped up, the LCD

display will show the mode the TV is in (TV or Radio) together with information about the

selected mode. When the TV is switched off to standby the display will go down again.When the TV is switched off with the power switch the display will remain in the position it was. If needed, you can manually push the display down.

Note:

- to switch off the automatic display movement, see Setup, General menu, Auto LCD movement, p. 9.

- you can change the position of the display, up or down, with the LCD key on the remote control. See use of the remote control, p. 4.

More details about the content of the display, see p. 3.

FM Wire Antenna connection

Connect the supplied FM wire antenna to the

FM RADIO ANTENNA 75 ø connector at the

back of the TV.Adjust the position of the FM antenna for the best reception.

75 ANTENNA

ANTENNA

FM RADIO

Note: for better FM stereo reception, connect an outdoor FM antenna or cable antenna to the

RADIO ANTENNA 75 ø connector using a

75 ø coaxial wire.

Keys on top of the TV

MENU/OK

Picture Sound Features

Setup

Demo

Install

Exit

Contents of the LCD display

Should your remote be lost or broken you can still change some of the basic settings with the keys on top of your TV.

Press:

• the V - or + key to adjust the volume;

• the -P+ keys to select the TV channels or sources.

The

MENU key can be used to summon the main

menu without the remote control.

Use:

• the V - and + keys and the

P- and P+keys to

select menu items in the directions as shown;

• the

MENU key to confirm your selection.

Note: When activated via the only

Exit lets you dismiss the menu.

Navigate to

Exit and press the MENU key.

MENU key on top of the TV,

rO starts blinking when the TV is receiving a command from the remote control.

Dependent on the selected mode, the following information may be displayed:

In TV mode:

- channel number, channel name or the selected external

-a volume bar

-feed back messages

- the surround signal the TV is processing

In Radio mode:

- the name of the selected station, the type of programme, the frequency

-a volume bar

- the RDS icon when playing a radio station with RDS signal

- the sound signal (stereo)

†

hb q

879

546

bæ

LCD

RADIO

Select

VCR DVD SAT AMP CD

Active Control

Ò‡ π

Use of the remote control RC4360

Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it. When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after 4 seconds or press

OK to remove immediately.

VCR DVD SAT AMP CD

Audio- and Video equipment keys (p. 22)

v Select peripherals (p. 21)

®Ò‡π†

Audio- and Video equipment keys (p. 22) RDS Radio see p. 18

® Record

See Record with your recorder with EasyLink, p. 22

U Time display

The time is displayed on the screen.

Q Surround mode

Press this key repeatedly to

Ì Cinema Go

select another available surround mode.

See separate Cinema Link booklet supplied.

æ NEXTVIEW on/off p. 14

S Freeze

To freeze the picture.

i On Screen information

Press to display information about the selected TV channel and programme or the tuned radio station. RDS radio function, see p. 18

Menu/Remote control info

When a menu is on screen, press

i to display info on the

selected menu item. For information on the remote control functions, while the menu info is displayed, press any key on the remote control. The normal function of the key is not executed.

B Standby

Press to switch the TV on or off. When switched off, a red indicator on the TV lights up.

xPixel Plus demo on/off

In the right part Pixel Plus and Digital Natural Motion are switched on.

b Teletext on/off p. 16

RDS radio function, see p. 18

OK Press this key

• to activate your choice, when in the menus.

• to display the programme list.

MENU Main menu, see p. 6

RDS radio function, see p. 18

V To adjust the volume.

¬ Interrupt or restore the sound.

PProgramme selection

To browse through the TV channels and sources stored in the favourite list. RDS radio function, see p. 18

0/9 Digit keys

To select a TV channel. For a two digit programme number, enter the second digit before the dash disappears.To switch immediately to a selected one digit TV channel, keep the digit key pressed a bit longer.

RADIO

Radio/TV mode selection, p. 18

LCD: LCD tilt up/down

†

hb q

879

546

bæ

LCD

RADIO

Select

VCR DVD SAT AMP CD

Active Control

Ò‡ π

0 Smart surf / NEXTVIEW themes

With this key you can easily switch between 2 up to 9 different TV channels or sources or quickly select TV programmes if

NEXTVIEW

with defined themes is broadcast. See General, Smart surf, p. 9. Press the

OK key or wait for the time out to dismiss the Smart surf

display.

b Dual screen

& Press the b or æ key.

Press the b key to show Teletext or

NEXTVIEW/Teletext Guide on

the right half of the screen.

é Move the puck to the blue ball in the left screen. Press +P- to select

another TV channel.

“ Press the q key to select a vertical squeezed or a non vertical

squeezed picture size.

‘ Press the b key to switch off Dual screen.

Note: Dual screen is not possible in Radio mode.

Active control see p. 11

q Picture format

Press this key repeatedly or press the cursor up/down to select another picture format:Auto format, Super zoom, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle zoom or Wide screen.

Super zoomAuto format 4:3 Movie Expand 14:9

Movie Expand 16:9 Subtitle zoom Wide screen

Auto format makes the picture fill the screen as much as possible. In case of subtitles in the bottom black bar,Auto format makes the subtitles visible. If subtitles are only partly visible, press cursor up. In case of a broadcaster logo in the corner of the top black bar, the logo disappears from the screen.

Super zoom removes the black bars on the sides of 4:3 programmes with minimal distortion.

When in Movie Expand 14:9, 16:9, Super zoom or Subtitle zoom picture format, you can make subtitles visible with the cursor up/down.

RDS Radio function, see p. 18

To use the menus

†

bæ

+ +

Select

VCR DVD SAT AMP CD

Ò‡ π

& Press the MENU key on the remote control to summon the

main menu.At any moment you can exit the menu by pressing the

Note: If you have connected equipment with Cinema Link, more menu items are present.

Demo

OK key to

activate

cursor to select adjustments

return or switch main menu on/off

é Use the cursor in the up/down direction to select the TV,

Setup, Demo or Install menu.

Use the cursor left/right to select

Features.

Note: Sometimes not all the menu items are visible on the screen (indicated by a cluster of blue balls). Use the cursor down or right to reveal all items.

“ Use the cursor in the left/right direction to select the menu

item.

Press the i key to get information about the selected menu item.

‘ Use the cursor up/down again to select the control you

want to select or to adjust.

Note: Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected.

Installation

The installation menu contains the following items:

MENU key again.

Picture Sound Features

Setup

Install

Picture, Sound or

Language Country Automatic Manual Give name Reshuffle Favourite

install install programmes

Install

EasyLink

If your video recorder has an EasyLink function, during installation, the language, country and available channels are automatically transmitted to the video recorder.

Select the menu language and country

Install

Language

English

Deutsch

Français

Country

Austria

Belgium

Croatia

& Press the MENU key on the remote control.

é Use the cursor down to select Install. “ Use the cursor right to select Language.

Follow the instructions on screen.

‘ Use the cursor up/down to select your preferred language

and press the

( Use the cursor right to select Country.

§ Select the country where you are now located and press

the

OK key.

Select

è Proceed with the Install menu.

OK key to confirm your selection.

Other when none of the countries applies.

Store TV channels

After language and country are set correctly, you can now search for and store the TV channels in two different ways:using Automatic Installation or Manual Installation (tuning-in channel by channel). Select your choice with the cursor right.

Automatic installation

Install

& Select Automatic install in the Install menu.

Automatic install

Install Start

Note: All channels must be unlocked in order to autoprogram. If requested, enter your code to unlock all channels. (See TV, Features menu, Childlock, p. 13.)

é Press the cursor down.

The autoprogramming option label

Start

appears.

“ Press the cursor right. ‘ The message Searching appears and the

progress of autoprogramming is displayed.

If a cable system or a TV channel which broadcasts ACI (Automatic Channel Installation) is detected, a programme list appears.Without ACI broadcast, the channels are numbered according your language and country selection.You can use Reshuffle to renumber them. See p. 8.

It is possible that the cable company or the TV channel displays a broadcast selection menu. Layout and items are defined by the cable company or the TV channel. Make your choice with the cursor and press the

key.

Manual installation

Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual Installation menu.

Install

Manual install

Selection mode System Programme Search Fine tune Store

& Select Manual install in the Install menu. é Press the cursor down.

Follow the instructions on screen.

Note: Search or direct selection of a TV channel. If you know the frequency, the C- or S-channel number, enter the 3 or 2 digits of the frequency or the channel number directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.

Repeat to search for another TV channel.

Give name

Install

It is possible to change the name stored in the memory or to assign a name to a TV channel for which a name has not yet been entered.A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99.

& Select Give Name in the Install menu and

press the cursor down.

Give name

VCR1 BBC1 BBC2 CNN

TVE

.....

® Space ® Delete

pπ

ABCDEFG 123 HIJKLMN 456 OPQRSTU 789 VWXYZ 0

® Shift ® Special

é Select the programme number.

Note: keep the cursor up/down pressed to scroll through the programme list quickly.

“ Press the cursor right.

A keyboard appears on the screen. Press the cursor right to enter the keyboard. Press the cursor up/down, left/right to select the first character and press

OK. Repeat for

every character you want to enter. Select

Space to enter a space; Delete to erase

the highlighted character in the name entered;

Shift to display upper- or lowercase characters

on the keyboard; characters on the keyboard. Press

Special to display special

OK to

confirm.

‘ Press the cursor left repeatedly when you have

finished the name giving.

( Select another programme number and repeat

steps

“ to ‘.

Reshuffle the programme list

You can change the order of the stored TV channels.

& Select Reshuffle in the Installation menu. é Follow the instructions on screen.

TV Setup

Speakers General Source Decoder

Setup

Test tone

Balance

Centre volume

(Surround volume)

Surround speakers

Auto surround

Select Favourite TV channels

& Select Favourite programmes in the Install

menu.

é Select your programme number with the

cursor up/down.

“ Select Ye s or No with the cursor right. ‘ Repeat é and “ for every TV channel or

external you want to make a favourite or a non-favourite TV channel or external.

The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected.

The

Speakers menu reflects the speaker-related

controls. The

General menu allows you to change settings

that will typically be accessed only occasionally. The

Source menu allows you to select a source.

The

Decoder menu allows you to define one or

more programme numbers as decoder programme numbers.

Speakers

Your TV is equipped with integrated front left, right and centre loudspeakers, capable of reproducing Stereo, Dolby 3 stereo and 3D Surround modes. For full Dolby Pro Logic Surround sound you should use two amplified rear surround speakers connected to the back of the TV. See Extra loudspeakers/Amplifier, p. 21.

Depending on the output and Surround mode (see Main menu,TV, Sound, Surround mode, p. 12) selected, some menu items may be greyed out and are not selectable.

Test tone controls

The menu item balance the volume levels of the speakers.

& Select Test tone and press the cursor right. é Once turned on, the Test Tone will circulate

through the left, centre, right speakers and both rear surround speakers (if present).

“ Press the cursor up/down to select the desired

speaker for individual volume level adjustment.

‘ Press the cursor left/right to adjust the volume

level.

Test tone enables you to

Surround Speakers

See Connect Peripheral Equipment, Extra loudspeakers/amplifier, p. 21. If no Surround Speakers are connected do not change the predefined factory settings which is

Off. If Surround Speakers are

connected select On. (Dolby Pro Logic and Hall are not available if Off is selected.)

Auto Surround

Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes. The TV automatically switches to the best surround sound mode when

Surround

is switched On.

Auto

However it is possible to overwrite this setting.

+ 16 hidden pages